Macbook Pro beeps on close lid -Bootcamp XP

Recently my Macbook Pro began beeping (like a system beep) a solid tone whenever i close the lid in windows xp, running under bootcamp. I have no clue how to fix it or why its doing it. The computer is of course trying to go to sleep when the lid is closed. It only lasts a couple of seconds most of the time, but when windows takes a little while to sleep it will continue producing a tone until the computer is asleep...
Any ideas?

Try resetting your SMC.
Resetting the System Management Controller >>
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

Similar Messages

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

MacBook Pro crashes when closing lid while in windows 8.1

I use a late-2011 MacBook Pro with Mavericks for work and run Windows 8.1 as my daily driver via Boot Camp. I've been running this setup for about a month without incident, but within the past week whenever I close the laptop it starts acting really weird. Normally it has alway just gone into sleep mode with the white LED on the front of the base pulsing slowly, and when I open it back up (even after a day or two) it snaps right back to action.
When I got home from work one day about a week ago I noticed that the computer was completely turned off, and when I booted it back up it went to OSX (I have it set to boot into Windows by default). I didn't initially think anything of it, but I soon realized that every time I closed the lid it was crashing. After closer examination I saw that the white LED wasn't flashing after closing the lid and that I could hear the fans still running. Oddly enough everytime I open it immediately after seeing this occur, the LED starts blinking when the lid is open yet the screen is black, the computer is unresponsive, and yet the fans are still humming. Eventually the computer just turns itself off completely. I've tested the same sequence of events while in OSX, yet everything works as it should: the LED illuminates immediately after closing the lid and the computer is fully operational the moment I open the lid.
I haven't made any major changes or performed any sort of updates since setting everything up initially, so I'm completely baffled as to why this is occuring. I've tried to reinstall/repair the Boot Camp drivers while in Windows, but to no avail. I'm at a total loss... I defintely am hoping to avoid having to wipe my fully configured windows installation and starting from scratch. Has anyone experienced anything like this and hopefully have any suggestions? Thanks!

I would be looking at the Quad core MBP for Parallels. A Quad-core vs Dual-Core is not a fair comparison.
For the same CPU, the two bottlenecks for Parallels are RAM and disk speed.
You will see an improvement if you max out the RAM and the disk speed. The SSD in the MBP will be much faster than the HDD in the iMac.

Macbook Pro to 20" Cinema with Bootcamp = main screen?

I have a 20" Cinema Display and a late 2008 black/silver Macbook Pro.
I am thinking of going bootcamp with Windows XP and use the external adaptor and 20" cinema as my main screen.
Will this become my "main screen"?
Or will the Windows task bar and menu etc all still be on the laptop screen? - and can i close this so i dont have to look at the laptop? - I just want my main screen to be the 20" Cinema
Thanks

Is the Mini DisplayPort plug pushed in all the way?

HT1338 how correct macbook pro going dark when lid lifted after sleep

When I lift the lid on my MacBook Pro the screen lights for a moment and then goes black. I have to force a close and restart to continue. Any solution?

For
'A portable Mac doesn't appear to respond properly when you close or open the lid'
Reset SMC.
http://support.apple.com/kb/HT3964
Hope this helps.

Macbook Pro not sleeping when lid closed

Since upgrading my late 2011 13-inch Macbook Pro to Yosemite, I've noticed that it does not go to sleep properly when I close the lid. While the screen does turn off, the white LED remains on at full brightness and the fans spin up to maximum speed. When I open the lid again, the fans slow down but the screen doesn't turn back on until I press a key. This suggests it wasn't sleeping at all and the display saver simply activated.
If I use the Apple menu (top left) to enter Sleep mode, wait for it to go to sleep then close the lid, it sleeps properly with the white LED glowing slowly.
I have checked the Energy Saver preferences, and there is no Sharing set up so I doubt that's the problem. Is anyone else having this issue? Any ideas how to fix it?

Similar issue after upgrade w my MBP (early 2011).
Close the screen with apps open... climb into bed... the laptop appears to enter sleep BUT several times thruout the night I hear the optical drive spin up along with the hard drive and screen glow (visible w screen closed as a glow)... then... it goes back to sleep (must detect closed screen).
Weird.
Did not do so with prior OS installs (not hardware issue... related to Yosie install).

MacBook pro shuts down when lid closed

So, I close the lid on my MacBook pro, go to bed and sleep. When I wake up, the computer shuts itself off for no reason. I've discovered that safe sleep doesn't help. I lose all my unsaved information.

I forgot to add that when the lid is closed it doesnt shut down straight away. The LED on the front pulses and for a good 10-15 mins it does sleep and wake. However any time longer and it does its hard shut down deal.

MacBook Pro (17-inch, Mid 2009) Bootcamp install of Windows 7 fails

I searched and tried everything suggested, but I am unable to get Windows 7 to install on my MacBook Pro (Updated to OSX Lion 10.7.4)
I even replaced the hard drive, installed Snow Leopard, upgraded to Lion, and am still at the same place.
Bootcamp assistant does its thing, creats the partition and when Windows 7 boots up to install, I end up with a blank screen (which tells me this has to be a driver related problem) - The CD spins for a while, and then all goes silent :-(
I've even connected an external monitor to the external display port, but that's also blank.
Has anyone out there managed to get Windows 7 installed on this model (This is the one with the NVIDIA GeForce 9400M and 9600M GT processors)
I've tried, in System Preferences/Energy Saver to switch to the "High Performance" graphics card, but still no go.
I have tried legitimate copies of Windows 7 Professional with SP1 and Windows 7 Ultimate.
I'm a Computer Science graduate with more than 30 years in Windows and more than 10 years in Mac experience and this one has stumped me.
Any help would be appreciated before I submit a support request to Apple $$$$

I've resolved my problem in that it turns out to be a hardware problem on my MacBook Pro.
Seems like the NVIDIA GeForce 9600M GT (the discrete high performance graphics processor) is not working - I am unable to switch the MacBook to the "High Performance" GPU - it always remains in the 9400M (integrated GPU) mode - which explains why Windows 7 is not installing - it's not supported with the 9400M, only the 9600M GPUs.
I'll send my MacBook in to see if they can replace the 9400M but I suspect that's a motherboard problem.
Hey Bob - looks like it turned out to be a MacBook Pro problem after all, and not a Bootcamp problem (Thanks for suggesting I look there tho)
I'm off FISHING !!!

How can I get my screen to show on an external monitor with a Macbook Pro that has no lid?

I recently purchased a Macbook Pro online that has no lid (no screen, no top to fold down, the whole shebang). I've been shown pictures of the laptop working to an external by the seller so for now let's assume that the port does work.
Details:
-Mid/Late 2007 15" model
-DVI connection to monitor
-Start-up chime does sound

Read here:
https://discussions.apple.com/thread/2056418?threadID=2056418&tstart=15

MacBook Pro Core i7 + Windows 7 Bootcamp issues

I recently bought a brand new MacBook Pro Core i7 2.66Ghz with 8GB Ram and 500GB 7200rpm HD and Hi-Res display.
When I received it, I updated all Mac OS X software via software update.
I then created a 70GB Bootcamp partition to install a new full copy of Window 7 Ultimate.
I started with the 64bit version of Win 7, but as has been noted here there are some issues with the driver packages and even after managing to get the 64bit version of the Bootcamp 3.1 driver package update to install in Windows (having first installed Bootcamp 3.0 drivers), the wireless driver would not install or work, nor would the NVidia driver, so I had a very odd display aspect and low res support. There may well have been other drivers not working either, but these two really stood out.
Despite the Bootcamp 3.1 driver package apparently being installed (as reported by "About Bootcamp", the 3.1 package was still being offered to me in Apple Software Update. I tried to install again, and again it still showed as being available to install. Obviously some issue's here.
So I decided to try the Windows 7 32bit edition instead, as I don't necessarily need the 64bit version to run the Windows apps I need.
I deleted the Bootcamp partition and started again. I ended up in the exact same situation with Windows 7 32bit as I had done with Windows 7 64bit - wireless device without a driver, NVidia drivers not installed. This time I had used the Bootcamp 32bit driver packages.
In the end I've opted to just install it via VMware as a pure virtual machine. This works fine, but for what I do in Windows, I prefer to have a Bootcamp setup.
Is there a general issue with the new MacBook Pro's and Windows 7 despite Apple releasing updated driver packages? Do these new driver packages handle the dual GPU setup properly?
I have read a number of "How to's..." for installing Windows 7 on the a MacBook Pro, but none have been successful for me. Am I wasting my time for now and need to wait for Apple to update Bootcamp for the 2010 MacBook Pro's, or am I just missing something in the way I'm doing this? I can't believe it shouldn't be this hard?

Running Windows 7 Ultimate x64 on my brand new 15" MBP right now.
The only problem I'm having is the USB controller issue that is reported in the following thread:
http://discussions.apple.com/thread.jspa?threadID=2411685&start=30&tstart=0
I ran the Boot Camp assistant, made the partition, rebooted with my 7 DVD, formatted the partition, performed a clean installation, & then installed the drivers from the OSX DVD when Windows booted the first time.
Replaced the NVIDIA drivers with the latest Verde release. 258.96notebook_winvista_win7_64bit_internationalwhql.exe
Everything seems to be running just fine at this point.
Message was edited by: jdamien75

My MacBook Pro beeped when I started up. Never happened before. I want to get it looked at, but I'm living in Antalya, Turkey right now. I will be in Athens, Greece until January 1st-are there any Apple stores in Athens? Please help. Thank you.

I have a mid 2012 MacBook Pro and it started to beep for the first time when I started up today. I think it was 3 continuous beeps then a pause. It sounded like an alarm and totally freaked me out. Then I pressed the on/off button for about 5 seconds and it restarted. I was able to get online, but then I had trouble with the trackpad, which is okay now. I have AppleCare and want to take it to an Apple Store, but I'm currently residing in Antalya, Turkey. I will be in Athens, Greece until January 1st. Are there any Apple Stores in Athens, Greece that I can take it to or Antalya, Turkey??? Thank you.

https://locate.apple.com/gr/el/

Switching MacBook Pro on without opening lid connected to external display

Hi all,
Simple question: I have external monitor, keyboard and mouse connected to my MacBook Pro and I wish to turn it on without having to open up my laptop.
I did find a resource over at Mac OS X Hints, but unlike other articles it is very lame. http://www.macosxhints.com/article.php?story=20080908013535674&query=keyboard. I do want a proper legit way of doing it!
For example, on PCs you can go in to your boot ram setup and make it so any key press can switch the PC on. Is this possible with my Mac Book Pro? I haven't been able to find a clean solution yet.
Any help would be appreciated!

Sorry, but it's not been possible to power up any Mac from turned-off state from an external device for a number of years (with the sole exception of the current Xserve). So you will have to open the screen on your MacBook, power it up, close the screen which will put the unit to sleep, then wake it from the external keyboard/mouse. Or attempt the trick on the site you posted for remotely pressing the power switch.
For this reason, most people who use their MacBook like you do just put it to sleep rather than powering it off.
Message was edited by: Dave Sawyer

Macbook Pro Hard drive partition and Bootcamp Info.plist

Okays, so i was planning on installing windows through USB bootcamp as my CD is broken. I tried editing the Info.Plist and i managed to stuff it up and lost original now it doesnt work, how do i redownload my original one.
THEN i tried to partition the hard drive with disk utility, i accidentally didnt resize each partition and force quit the app and now my hard drive shows 249.56 GB FULL instead of 129.45 full, what do i do to fix my hard drive. in the "about this mac" it shows half my hard drive used as "Other". Please help
Its a Macbook pro 2010 13inch
running 10.9 Maverick

Hi Michele,
Sounds like a corrupted partition map. Can you run the Bootcamp Setup Assistant again to restore the drive to a single volume? Otherwise, I'd backup the OS X side and then re-partition the drive and start from scratch, then restore your backup so at least you'll be back up and operational on the OS X relatively quickly.

MacBook Pro beeps and briefly freezes in predictable pattern

I have an early 2011, 15" MacBook Pro, OS X 10.6.8.
Recently, it's been making fairly quiet but high-pitched beeping noises, not sporadic, but in a regular pattern. When this beeping occurs, whatever I'm using briefly freezes: If I'm using Chrome, the next page will load only after the beeping stops. If I'm using VLC, the video freezes typically for 10 seconds; once the beeping stops, the video turns gray for a second before continuing normally. If I'm using iTunes, the audio similarly freezes. I've also noticed these hitches occur about once an hour.
I don't know what caused this. A week or so ago I moved out of my apartment. There it was fine, and now it's like this. To my recollection, nothing else major has happened. I'm very delicate with my laptop, so I'm sure I didn't bang it up or anything.
If you're curious about console messages during the hitches:
VLC says:           main input error: ES_OUT_SET_(GROUP_)PCR is called too late (jitter of 9408 ms ignored)
Chrome says:      The GPU process hung. Terminating after 10000 ms.
Any ideas?
P.S. More about the beeping noise: It's the kind of noise a healthy computer makes during run-of-the-mill processes, only in a peculiar, regular pattern. I may be confusing beeping for subtle clicking, by the way.

Reset SMC.     http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

Macbook Pro beeps on close lid -Bootcamp XP

Similar Messages

Maybe you are looking for