MacBook Pro beeps on power up

I used my macbook last night and when I was finished put it on the charger and closed the lid. This morning when I woke up and opened it the display was black and it began beeping. The beeping had no pauses and was continuous, about every 7 seconds or so. The macbook would click every once in a while because I dropped it about a month or two ago, so could this be it for my mac? I probably need to replace the hard drive?

Removing or installing memory/ re-seating
http://support.apple.com/kb/ht1270#link1

Similar Messages

  • I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

    I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
    I saw this report being sent to Apple:
    Interval Since Last Panic Report:  581719 sec
    Panics Since Last Report:          10
    Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
    Fri Mar  7 13:00:14 2014
    panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
    RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
    RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
    R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
    RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS:  0x0000000000000008, SS:  0x0000000000000010
    Error code: 0x0000000000000000
    Backtrace (CPU 0), Frame : Return Address
    0xffffff805e5f3a00 : 0xffffff8000204d15
    0xffffff805e5f3b00 : 0xffffff80002d1208
    0xffffff805e5f3c50 :
    Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
    Serial ATA Device: OPTIARC DVD RW AD-5970H
    USB Device: FaceTime HD Camera (Built-in), 0x05ac  (Apple Inc.), 0x8509, 0xfa200000 / 3
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 5
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x821a, 0xfa113000 / 8
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0245, 0xfa120000 / 4
    USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0xfd110000 / 3

    Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
    There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
    If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
    Run Rember first... call back with results.
    Good luck,
    Clinton

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

  • User Contributed Tips in the MacBook Pro (Late 2008) Power and Batteries

    *The following User Contributed Tips are located in the MacBook Pro (Late 2008) > Power and Batteries on a MacBook Pro (Late 2008) forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
    http://discussions.apple.com/thread.jspa?threadID=1764220
    Publish date: Oct 23, 2008
    Also see User Tips Library

    The management is quite easy. You can move your Documents, Movies, Music, and Pictures folders to another drive and then replace them in the original location with aliases.
    Select Mac Help from the Finder's Help menu and search for "alias." This will provide a help file on creating and using aliases.

  • My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

    My sister spoiled water into my macbook pro and the power went off in two seconds. I took off the cover and dried the water with tissues. Still it doesnt work. What do i do?

    Do you mean when the water was spilled on it, it shut down?  That would indicate a major internal short occured.
    Really, I'd say you need to take it into Apple or an Apple authorized repair center and get it looked at.  Odds are you've got a significantly damaged device that will require professional repair and parts replacement to get working again.

  • My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    My 13.3" macbook pro will not power up.The battery indicator light does not come on.The Mag safe charging light flickers green and red dimly.I had a cell phone connected to the USB port.

    This didn't work for me, so I did a bit of searching and TONS of pages later in google, I found an answer. Here are the steps for people who also were in my situation:
    1. Take off bottom case
    2. Unplug battery - blurry image here: http://i.ytimg.com/vi/03cC79r5Dx4/0.jpg
    3. Press and hold power button for 5 seconds
    4. Plug a charger in, and it should start booting up
    5. After shutting down again, reconnect the battery and close the case up
    6. It works! (hopefully, if you guys had the same situation I did)

  • Sleep light is on but MacBook pro will not power up

    Sleep light is on but MacBook pro will not power up

    Hi a,
    If the sleep light is already on when you try to start up, that means the MBP isn't shut down, so cannot start up. Hold down the power button for 5-10 seconds to shut it down, then try starting up.

  • Would it be bad if i left my Macbook Pro on the power supply constantly?

    I wanted to know if there was any bad that comes out of leaving my Macbook Pro on its power supply and charging 24/7?

    Yes. Do not do that.
    http://www.apple.com/batteries/notebooks.html
    If for some reason you want your MBP to be up and running all the time, plug in the charger but remove the battery. That's how they do it in the Apple Retail Stores. Before removing the battery, run the computer without the charger attached until the battery is about 50% charged. That will maximize its useful life while it remains in storage.

  • HT3964 MacBook Pro will not power

    My MacBook Pro will not power on. It was charged and then just shut off and power cord does not even light up. How do I fix this?

    jpg8,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • Macbook pro goes into power save mode with dell sp2208wfp monitor.

    I have a macbook pro and am trying to connect it to a dell sp2208wfp monitor, I am using a hdmi cord and it goes straight to power save mode. My mac works on my roommates monitor and his PC works on my monitor but my mac doesn't work on my monitor. I've read the other forums and have found nothing. One guy suggested plugging the mac into a power source still nothing, any solutions before I try and sell this thing on craigslist?

    Had the same issue a few months ago when I tried connecting to external monitor, it is only possible to run external displays from a Macbook Pro while the power cable is attached, if you try and connect to external display without having the charger attached the external display will flash your desk top for a second and then your Macbook Pro will go to sleep.  Hence connect your charger every time you wish to connect to external display, its not a problem with your Macbook Pro, it's just the way of Apple. Hope that helps.

  • MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

    MacBook pro won't power up! Acting asleep, black screen, fans don't fire up. Light nr catch pulsing, have taken batt out and reset but still blank screen, help!!

    You may want to try this.
    Solution A
    Start up your MBP while pressing Option (alt)|, Command, P, R until your hear 3 chimes rather than 2 as indicated by apple. This worked for me the first time.
    Solution B
    Start your MBP while pressing Option (alt), Command, S
    Hold until you see the computer automatic routine. When it finally stops type the following followed by "return":
    fsck -fy
    It will probably indicate some problem related to "pcscd.pub" (should be 16 instead of 17). I haven't figured out what this means but somewhere in the Internet i read it is related to scan cards...
    More importantly this routine will fix any problems with your HDD similarily to disk repair. When it ends, it will tell you if it has fixed/modified anything. If it has, run the routine again by typing again "fsck -fy"
    Lastly, reboot by typing "reboot" (followed by "return")
    Solution C
    Start up your MBP while pressing option (alt), command, S
    hold keys until you see computer commands scrolling
    when the routine stops type the following, each line followed by the "return" key:
    mount -uw /
    chmod 775 /
    chmod 1775 /
    reboot
    After which your computer should reboot on it's own.
    Each of the above has worked for me at one time or another. Once your computer has rebooted from the DVD you can reinstall OS X. If your problems started after installing 10.5.6, then I don't suggest updating until 10.5.5.
    I'm very very disappointed with my 2007 MBP, it started to give me problems after 1 year. had to change the HDD and lately when I isntalled 10.5.6 it suddenly refused to start up., My previous Mac laptop (2003 866Mhz) worked for 4 years without a hitch. Ironically I've had to use it to access the internet and find solutions for my current MBP.
    best of luck

  • Macbook pro won't power up or charge after i cleaned the screen and keyboard with a damp cloth.

    My macbook pro won't power up or charge after i cleaned the screen and keyboard with a damp cloth

    Do not try to use it.  Make an appointment at an Apple store genius bar and have the technicians evaluate it for FREE.
    Ciao.

  • HT3964 MacBook Pro beeps and vertical lights on screen

    MacBook Pro 2years old vertical lights come on beeps then I have to restart  anyone help please

    Try resetting your PRAM. If that doesn't work, you may need to get it looked at. It could be a power supply or hard drive issue.
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • HT3205 My Macbook pro can not power on after not being in use for two months. all the battery indicator lights lights but when the power on botton is pressed, the laptop makes intermitent noise

    How do I wake up my Macbook pro from sleep after not using it for about too months, it beeps continually when the power on botton is pressed. I put it on charge for over too hours, it still can not power on

    Yes, I took it to apple store, George Town, US and one out of the two memory chips was bad. It was replaced free of charge because the Mac book pro was under warranty, and it is working perfectly.
    Thanks

  • Macbook Pro will not power on without battery installed

    Hi there,
    I have a Macbook Pro A1226 that fails to power on without a battery installed.
    i.e. will not run off AC power on its own. I have tried 2 other power adapters, no change. All 3 adapters are outputting the correct voltage without fluctuations.
    But, if I am in OSX with a battery plugged in, shutdown the laptop, remove the battery while AC is still plugged in, it will power back on without any issues. But as soon as I remove the battery, it will not power back on using just AC.
    Is this an I/O board issue, or a mainboard?
    I have power drained the unit and reset the parameter ram.
    Thanks

    Any update on this? This is the same thing that's going on with my laptop right now. I was at the Genius Bar and they said they can send it in for repair. Takes 7-9 days and costs a minimum of $310. At the time I was there, my computer wouldn't start up at all, because the battery had drained to less than 20%. It didn't even start with just the power cord (no battery in). The "genius" finally got it to work by doing a PRAM and SMC reset. Got home and was able to recharge my battery to 100%. Used my computer for 2 days before I dared to take it off the power supply. Lo and behold, as soon as I take it off the power cord, then re-connect it, it shows "Not Charging". I tried to do SMC again, but no luck. Keeps saying "not charging". Even tried with a brand new battery. Do I have to get the I/O board thingy replaced?

Maybe you are looking for

  • Cannot print a web page since recent update to Apple Snow Leopard

    After recent update to Mac OS 10.6.4 I cannot print any page when using Firefox. I tried using Apple Safari and there was no problem == This happened == Every time Firefox opened == After recent update to Mac OS 10.6.4

  • N80 woes

    My N80 is playing silly buggers. I have had it for 2 months but about 2 weeks ago it stopped letting me connect to it via USB. I have since removed the old version of PC suite, upgraded to the new one, used the removal tool and repeated this several

  • How to replicate purchasing group from R/3 to EBP

    HI, 1.Cany anyone kindly explain me in steps the procedure to replicate new purchasing groups created in r/3 to EBP? 2. How to assign the new purchasing group to user against cost center in EBP organisation structure? Thank you.

  • Can I programatically read the wls properties file

    I'd like to set my own application specific properties in the properties           file and then read them programmatically. Can I do this?           thanks for any help,           Edwin Marcial           

  • Workflow Forwarding is giving dump in webdypro.

    Hello Experts, I am working with some workflow tool with WD ABAP. And i want to forward workitem to another user and i m using SWL_WI_DISPATCH funtion module for forwarding . But its giving me dump in my web dynpro application. If there any alternati