Macbook Pro behaving extremely strangely

Today I took delivery of a new 11 inch Macbook Air. Started migrating over wi-fi from my 2009 Macbook Pro and obviously it was taking forever so I stopped it after a few hours. Now doing a backup restore to the Macbook Air from Time Capsule which seems to be going much quicker. However, my Macbook Pro has now started behaving really strangely. Particularly, it won't recognise clicks on my magic mouse and I have to press hard on the trackpad for it to recognise clicks have tried monekying about with trackpad and magic mouse setting but to no avail.
When it started doing this, if I restarted the computer it would work fine for about a minute and then start doing this. Now it's just doing this. Also it seemed to have logged me out of my home network but now logged back in. It's running Lion by the way and has been a little glitchy since installing that anyway but so far nothing like this. Is it connected to the aborted migration or the currently restoring Macbook Air perhaps? Both computers would be having the same user account signed (that's ok right)? Please can someone help!

Sorry to keep bumping this but keep finding new things. Ok, so if I restart my Macbook Pro everything works fine, mouse clicks are registered no problem UNTIL I touch the trackpad or close the lid and reopen. If I touch the trackpad it reverts to clicks not registering on the mouse and the trackpad continues to behave in this screwy way. Same thing for closing the lid and putting to sleep. Please, does anyone have any thoughts. Going to take it to the geniuses tomorrow anyway but if anyone has any thoughts it'd really be appreciated!

Similar Messages

  • My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

    my macbook pro started acting strange after a safari reset.
    the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
    the mouse also gets 'stuck' in logic precipitating force quits.
    i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
    my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
    pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
    macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
    i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
    what shoud i do?

    You don't say which year you have, however...
    ...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
    Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
    One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
    Good luck,
    Clinton

  • My macbook pro runs extremely slow. I've tried everything on the forums, but nothing has worked.

    I made an account just for this. My macbook pro is extremely slow, but only some of the time. When I normally browse it isn't that bad, but using any flash application or playing any game results in a 100-400 (sometimes 350%) CPU usage of the flashplayer. When I play a game something called kernel_task or mdworker take up a lot as well. Here's my EtreCheck, if it helps.
    EtreCheck version: 1.9.15 (52)
    Report generated September 20, 2014 at 3:20:33 PM EDT
    Hardware Information: ?
        MacBook Pro (13-inch, Early 2011) (Verified)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2 cores
        4 GB RAM
    Video Information: ?
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ?
        OS X 10.9.5 (13F34) - Uptime: 0 days 0:41:46
    Disk Information: ?
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted>: 209.7 MB
            Macintosh HD (disk0s2) / [Startup]: 319.21 GB (219.29 GB free)
            Recovery HD (disk0s3) <not mounted>: 650 MB
        MATSHITADVD-R   UJ-898 
    USB Information: ?
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Razer Razer Mamba
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
        Apple Inc. thunderbolt_bus
    Gatekeeper: ?
        Mac App Store and identified developers
    Kernel Extensions: ?
        [loaded]    com.AmbrosiaSW.AudioSupport (4.1.2 - SDK 10.7) Support
        [not loaded]    com.anchorfree.tun (1.1.1 - SDK 10.8) Support
        [not loaded]    com.logmein.hamachi (1.0) Support
        [loaded]    com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) Support
        [loaded]    com.razer.common.razerhid (1.6 - SDK 10.6) Support
    Launch Daemons: ?
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist Support
        [loaded]    com.anchorfree.ajaxserver.plist Support
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist Support
    Launch Agents: ?
        [running]    com.razer.common.rzcoreengine.plist Support
        [running]    com.razer.mambaIIdaemon.plist Support
    User Launch Agents: ?
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
        [running]    com.spotify.webhelper.plist Support
        [loaded]    com.valvesoftware.steamclean.plist Support
    User Login Items: ?
        None
    Internet Plug-ins: ?
        FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
        Default Browser: Version: 537 - SDK 10.9
        Unity Web Player: Version: UnityPlayer version 4.3.5f1 - SDK 10.6 Support
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
        DirectorShockwave: Version: 11.6.6r636 Support
    Audio Plug-ins: ?
        BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
        AirPlay: Version: 2.0 - SDK 10.9
        AppleAVBAudio: Version: 203.2 - SDK 10.9
        iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
        Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
        Flash Player  Support
    Time Machine: ?
        Time Machine not configured!
    Top Processes by CPU: ? (this was when the game was not running)
            64%    LolClient
             7%    WindowServer
             7%    LoLPatcher
             6%    firefox
             4%    hidd
    Top Processes by Memory: ? (same as above)
        406 MB    LolClient
        270 MB    firefox
        111 MB    com.apple.IconServicesAgent
        49 MB    WindowServer
        45 MB    Finder
    Virtual Memory Information: ?
        983 MB    Free RAM
        1.49 GB    Active RAM
        693 MB    Inactive RAM
        893 MB    Wired RAM
        525 MB    Page-ins
        0 B    Page-outs

    Here is an example of high CPU usage by the way.

  • HT1895 My macbook pro is making strange fan related noises. Sounds as if something is stuck in the fan. First time this has happened since I got my computer. Every time I put it to sleep I wouldn't hear the sound anymore. Any suggestions?

    My macbook pro is making strange fan related noises. Sounds as if something is stuck in the fan. First time this has happened since I got my computer. Every time I put it to sleep I wouldn't hear the sound anymore. Any suggestions?

    ... Sounds as if something is stuck in the fan.
    Probably is. They get dusty. Shut down your computer and clean it out with a vacuum (don't blow dust back inside).

  • My macbook pro 2010 extremely noisy and a warning flashed on the screen about a power or battery issue- can you help please?

    My macbook pro 2010 has started getting extremely noisy in the last few months and I had a strange warning flash up on the screen a month or so ago about a power or battery issue… can you help please?

    Calibrating a 2010 MBP is not required.  All it will achieve is putting an unnecessary cycle on it and shortening its life:
    http://support.apple.com/kb/ht1490
    You may try a SMC reset:
    http://support.apple.com/kb/HT3964
    Open System Information>Power and post the following from your MBP:
    (Make certain that the charger is connected)
    Ciao.

  • MacBook Pro (mid 2009), strange display problem

    Hello everybody,
    This is my first post here, so thanks everybody who will read my post.
    In February 2010 I bought two MacBook Pro 13 inch, for me and my girlfriend. Both of them are still working awesome, just one of them seems to develop a problem. I will try to detail it here, just that it's pretty strange even to explain.
    When I look close to the screen, in seems that the colors in the images (web page elements, photos and so on) are not smooth (when changing from one color to other) rather they have very sharp edges. Next, when I look at the open menus (ex. the Apple menu in the left corner) it has some horizontal tiny lines. More, when I move the mouse over some elements (like the icons in the bar) some small square appears (like a net). I did reload the Mac and I was able to stop the same small squares over the Mac logo while booting. They are bearly visible, but for sure are there as I compare with the other Mac which has no such problems. This small squares net can be seem all over desktop and it seems that it flickers at around 2 seconds (there, not there, there...)
    I know that it may be hard for you to understand, so later I will try to add a screen capture, if you don't understand my issue.
    I do not have this issue if I connect an external monitor! So, I don't believe is from the graphic card / chipset.
    If anybody encounter this kind of problems please give me an advice. Please consider the following:
    - I'm pretty good with technical stuff, so don't be shy to give technical details
    - I don't have Apple Care
    - I have been already to two authorized centres (I live in quite a small town in Austria); one told me that they will open in 3-4 months, the other told me that they can send it to Vienna, but it will take about a month and will be very expensive around 700-750 euro (aprox. 800-850$). How they know it will be expensive if they don't know the issue?!. I assume that they mean full replacement of the display, but in this case I would rather sell it for spare parts and buy a newer one
    - There is another authorized repairing centre at about 60 km from my city, I will try to make them a visit tomorrow, still I would glad if somebody can give me a hint.
    - As I extended the memory in my Mac (2GB to 4GB) I know the layout inside the unibody case, just if you want to tell me to check some cables (btw, this with the memory upgraded is the one working, the other one was never opened or technically touched in any way).
    Thank you all  and have a nice day!

    OK, if anybody is curious, here is the outcome. I took the device to an Apple authorized repairing center and they told me that the display it's the problem. I didn't get details (but I'll ask when I'll pickup my device) if the LCD was damaged, or some cables, but they said the whole display need to be replaced.
    The prices (in Euro, but you can make the conversion)
    - the initial checkup and problem identification: 80 Euro (I have to pay this only if I choose not to repair the device at their service)
    - the repairing (display + work): 500 Euro
    Not to happy to pay such an amount of money but what can I do?
    Nevertheless I want to believe that this was somehow bad luck, as I have more than four Apple devices that run just fine.
    Best regards,
    Calin

  • My MacBook Pro is extremly slow and keep freezing after upgrading to Yosmite, please advise

    My MacBook Pro is slow after updating to Yosmite it keep freezing and Safari most of the time not responding, generally speaking the performance is way worse than Mavericks when it was installed and here is my config:
    EtreCheck version: 2.0.11 (98)
    Report generated December 1, 2014 at 12:53:23 PM GMT+2
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2012) (Verified)
        MacBook Pro - model: MacBookPro9,1
        1 2.6 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 4000 -
            Color LCD 1440 x 900
        NVIDIA GeForce GT 650M - VRAM: 1024 MB
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: one day 16:9:57
    Disk Information: ℹ️
        APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) /  [Startup]: 748.93 GB (80.35 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 60
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) Support
        [not loaded]    com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) Support
        [not loaded]    com.nike.sportwatch (1.0.0) Support
        [not loaded]    com.novatelwireless.driver.3G (3.0.7) Support
        [not loaded]    com.novatelwireless.driver.DisableAutoInstall (2.0.6) Support
        [not loaded]    com.option.driver.Option72 (2.15.0) Support
        [not loaded]    com.option.driver.OptionHS (3.26.0) Support
        [not loaded]    com.option.driver.OptionMSD (1.21.0) Support
        [not loaded]    com.option.driver.OptionQC (1.11.0) Support
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
        [not loaded]    com.vodafone.driver (3.0.5) Support
        [not loaded]    de.novamedia.driver.NMLGEDriver (3.2.10) Support
        [not loaded]    de.novamedia.driver.NMSamsung (0.0.2) Support
        [not loaded]    de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
        [not loaded]    de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
        [loaded]    net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) Support
            /System/Library/Extensions/NMHuaweiPhonesVTPCDC.kext/Contents/Resources
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData.VTP (3.2.6) Support
            /System/Library/Extensions/NMLGEDriver.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMControl (3.1.9) Support
        [not loaded]    de.novamedia.driver.NMLGEUSBCDCACMData (3.1.9) Support
            /System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
        [not loaded]    de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
        [not loaded]    de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
            /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
        [not loaded]    com.novatelwireless.driver.3GData (3.0.7) Support
            /System/Library/Extensions/Vodafone.kext/Contents/Plugins
        [not loaded]    com.vodafone.driver.Data (3.0.5) Support
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.CS5ServiceManager.plist Support
        [running]    com.nike.nikeplusconnect.plist Support
        [loaded]    com.oracle.java.Java-Updater.plist Support
        [running]    com.rim.BBAlbumArtCacher.plist Support
        [running]    com.rim.BBLaunchAgent.plist Support
        [running]    com.vsearch.agent.plist Support
        [failed]    de.novamedia.VodafoneDeviceObserver.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [invalid?]    com.adobe.SwitchBoard.plist Support
        [running]    com.autodesk.backburner_manager.plist Support
        [running]    com.autodesk.backburner_server.plist Support
        [loaded]    com.autodesk.backburner_start.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [loaded]    com.oracle.java.Helper-Tool.plist Support
        [loaded]    com.oracle.java.JavaUpdateHelper.plist Support
        [running]    com.rim.BBDaemon.plist Support
        [not loaded]    com.vsearch.daemon.plist Support
        [running]    com.vsearch.helper.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.BlueStacks.AppPlayer.LogRotator.plist Support
        [loaded]    com.BlueStacks.AppPlayer.Service.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UninstallAgent.plist Support
        [loaded]    com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
        [loaded]    com.facebook.videochat.[redacted].plist Support
        [invalid?]    com.jdibackup.JustCloud.autostart.plist Support
        [invalid?]    com.jdibackup.JustCloud.signup.plist Support
        [running]    com.nero.HSMMonitor.plist Support
    User Login Items: ℹ️
        uHD-Agent    Application (/Applications/BlueStacks.app/Contents/Runtime/uHD-Agent.app)
        iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Dropbox    Application (/Applications/Dropbox.app)
        SpeechSynthesisServer    Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
        uTorrent    Application (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        net.juniper.DSSafariExtensions: Version: (null) Support
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.2 - SDK 10.6 Support
        Silverlight: Version: 4.1.10329.0 Support
        MeetingJoinPlugin: Version: (null) - SDK 10.6 Support
        JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
        BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    Safari Extensions: ℹ️
        Awesome Screenshot
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
        FUSE for OS X (OSXFUSE)  Support
        GoPro  Support
        Growl  Support
        Java  Support
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            42%    firefox
             9%    WindowServer
             4%    system_profiler
             2%    hidd
             1%    plugin-container
    Top Processes by Memory: ℹ️
        1.44 GB    firefox
        215 MB    Viber
        155 MB    softwareupdated
        146 MB    mds_stores
        146 MB    WindowServer
    Virtual Memory Information: ℹ️
        206 MB    Free RAM
        3.39 GB    Active RAM
        3.14 GB    Inactive RAM
        1.16 GB    Wired RAM
        21.12 GB    Page-ins
        790 MB    Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Macbook Pro running extremely slow (log included) especially when safari is opened. How can I fix this?

    Hello
    When I open my macbook it is running extremely slow - especially once I launch safari. It can take minutes to load a page or for a page I am already typing on to even respond. I have pasted below part of my log from the application - Console. I have not included all of it as it was 7 pages long but please let me know if you need further information. Thank you for any help!
    7/01/14 4:01:54 AM           mDNSResponder[18]           mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
    7/01/14 4:01:54 AM           com.apple.SecurityServer[24]         Session 0x5fbff962 created
    7/01/14 4:01:54 AM           com.apple.SecurityServer[24]         Entering service
    7/01/14 4:01:54 AM           kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    7/01/14 4:01:54 AM           kernel AGC: 2.10.6, HW version=1.9.21, flags:0, features:20600
    7/01/14 4:01:54 AM           kernel Previous Shutdown Cause: 5
    7/01/14 4:01:55 AM           com.apple.launchd[1]           (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    7/01/14 4:01:56 AM           kernel NVDANV50HAL loaded and registered.
    7/01/14 4:01:56 AM           kernel DSMOS has arrived
    7/01/14 4:01:56 AM           configd[14]    bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    7/01/14 4:01:56 AM           configd[14]    DHCP en1: INIT-REBOOT transmit failed
    7/01/14 4:01:56 AM           configd[14]    network configuration changed.
    7/01/14 4:01:56 AM           configd[14]    setting hostname to "Ashlee-Robertsons-MacBook-Pro.local"
    7/01/14 4:02:00 AM           com.apple.launchd[1]           (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    7/01/14 4:02:02 AM           kernel en1: 802.11d country code set to 'DE'.
    7/01/14 4:02:02 AM           kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
    7/01/14 4:02:02 AM           bootlog[53]    BOOT_TIME: 1389029506 0
    7/01/14 4:02:07 AM           blued[16]       Apple Bluetooth daemon started
    7/01/14 4:02:07 AM           com.apple.launchd[1]           (com.apple.SystemStarter) Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
    7/01/14 4:02:07 AM           kernel Auth result for: e0:46:9a:18:22:10 MAC AUTH succeeded
    7/01/14 4:02:07 AM           kernel AirPort: Link Up on en1
    7/01/14 4:02:08 AM           kernel AirPort: RSN handshake complete on en1
    7/01/14 4:02:09 AM           configd[14]    network configuration changed.
    7/01/14 4:02:09 AM           /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[41]          Login Window Application Started
    7/01/14 4:02:09 AM           com.apple.usbmuxd[33]      usbmuxd-323.1 on Oct  3 2013 at 12:43:24, running 64 bit
    7/01/14 4:02:10 AM           com.eltima.ElmediaPlayer.daemon[60]      Elmedia Player: Driver launched... Error code 0
    7/01/14 4:02:10 AM           org.apache.httpd[28]            httpd: Could not reliably determine the server's fully qualified domain name,
    7/01/14 4:02:10 AM           rooksd[59]     3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
    7/01/14 4:02:10 AM           rooksd[59]     kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    7/01/14 4:02:10 AM           rooksd[59]     kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    7/01/14 4:02:10 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 -MacBook-Pro.local rooksd[59] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 -MacBook-Pro.local rooksd[59] <Error>: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 -MacBook-Pro.local rooksd[59] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 Ashlee-Robertsons-MacBook-Pro.local rooksd[59] <Warning>: Window Server is not available.
    7/01/14 4:02:10 AM           rooksd[59]     kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    7/01/14 4:02:10 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 MacBook-Pro.local rooksd[59] <Error>: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
    7/01/14 4:02:10 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:10 -MacBook-Pro.local rooksd[59] <Warning>: Window Server is not available.
    7/01/14 4:02:09 AM           kernel Stat: 6/6
    7/01/14 4:02:11 AM           com.apple.launchd[1]           (com.apple.xprotectupdater[31]) Exited with exit code: 252
    7/01/14 4:02:11 AM           com.apple.SecurityServer[24]         Session 0x424912 created
    7/01/14 4:02:11 AM           com.apple.SecurityServer[24]         Session 0x424912 attributes 0x30
    7/01/14 4:02:12 AM           loginwindow[41]       Login Window Started Security Agent
    7/01/14 4:02:12 AM           WindowServer[86]   kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    7/01/14 4:02:12 AM           SecurityAgent[108]  Showing Login Window
    7/01/14 4:02:14 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:14 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:14
    7/01/14 4:02:14 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:19 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:19 AM           rooksd[59]     Window Server is not available.
    7/01/14 4:02:19 AM           com.trusteer.rooks.rooksd[59]         Tue Jan  7 04:02:19
    7/01/14 4:03:01 AM           StatusMenu[152]      Attempting to monitor /Library/Application Support/WDSmartWare
    7/01/14 4:03:01 AM           StatusMenu[152]      Monitoring /Library/Application Support/WDSmartWare
    7/01/14 4:03:06 AM           rapportd[145]           *** __NSAutoreleaseNoPool(): Object 0x2816cb0 of class NSCFString autoreleased with no pool in place - just leaking
    7/01/14 4:04:26 AM           kernel Safari (map: 0x8dc80a4) triggered DYLD shared region unnest for map: 0x8dc80a4, region 0x7fff88a00000->0x7fff88c00000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    7/01/14 4:07:52 AM           [0x0-0x15015].com.apple.Safari[167]                   at sun.plugin2.main.server.MozillaPlugin.getCachedSiteData(MozillaPlugin.java:504)
    7/01/14 4:07:53 AM           [0x0-0x15015].com.apple.Safari[167]       Exception in thread "main" java.lang.NullPointerException
    7/01/14 4:07:53 AM           [0x0-0x15015].com.apple.Safari[167]       2014-01-07 04:07:53.784 PluginProcess[189:903] *** __NSAutoreleaseNoPool(): Object 0x300140 of class NSCFDictionary autoreleased with no pool in place - just leaking
    7/01/14 4:09:12 AM           kernel (default pager): [KERNEL]: Switching ON Emergency paging segment
    7/01/14 4:09:16 AM           kernel (default pager): [KERNEL]: System is out of paging space.
    7/01/14 4:12:11 AM           kernel (default pager): [KERNEL]: Switching ON Emergency paging segment
    7/01/14 4:12:56 AM           /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[149]    No valid tickets, timing out
    7/01/14 4:13:56 AM           kernel (default pager): [KERNEL]: System is out of paging space.
    7/01/14 4:21:45 AM           kernel (default pager): [KERNEL]: Recovered emergency paging segment
    7/01/14 4:23:41 AM           Safari[192]    IPCClient: Server port 0 is invalid; looking it up again...

    Start by removing "Rapport" and "Elmedia Player," both of which are much worse than useless. If there's no improvement, post again.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
    Back up all data before making any changes.
    You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • Macbook Pro running extremely slow

    While still on Mavericks my Macbook Pro 13 mid 2010 (2.4 Intel core 2 duo) sporadically began running extremely slow functions, even the mouse cursor moved in jolts and steps, to type a word in google search engine I had to wait a few seconds after being typed for the word to appear on screen. The internal speaker volume responds 10 seconds after tapping the buttons on the keyboard.  Videos are unplayable in netflix and other sites because picture freezes and runs in jolts and steps. Its Not the internet connection or the streaming.
    I upgraded to Yosemite to see if this would fix the problem, I upgraded the darned adobe flashplayer believing maybe I needed the latest software available for my programs for the computer to run smoothly. I upgraded the RAM to 8GB from 4GB and did not fix the problem. I have more than half of the 500GB hard drive with free space. I'm getting a Java Runtime Environment download prompt to view properly something every time I boot the computer.  The "slowness" comes and goes. But it gets more frequent and worse each day. I can't work.  Could it be some type of malware that makes the computer slow? I can't identify a specific malware to address and remove. Could it be that the fan isn't working properly and runs slow when its too hot?? Please HeLP!!

    a very good and quite current discussion on the issue is here > Mac slow after Yosemite 10.10.1 up-grade - kernel task? - the best of the best here in the forum weigh in here. - Feliz Navidad - ÇÇÇ

  • Macbook Pro Retina 15" strange stain on screen

    Hi guys. Today i noticed a strange stain on the bottom right corner of my Macbook Pro Retina 15 screen (plase see the photo provided). I thought that it's just dirty but it's impossible to clean it. Any thoughts?
    Thanks!

    Hi!, this is a message that I left in another post that is related to this case:
    Hi guys. I have the same problem and this clearly is a design problem.
    We all have had bad experiences in both official Apple stores and partners stores separately so I think is time to make Apple seriously aware of this issue and ask them to find us a free and permanent solution. We are all Apple loyal customers and this problem clearly is not our fault, it is not driven by bad use so we need to join forces and push the company to solve this.
    I have created an online database so the people that want can get it and share your problem details, pictures as well as your Macbook details and contact info. As soon as I have an important amount of people (let's say 50 - 100 people) I will start contacting Apple employees via social networks and provide them with details of the people in the list.
    https://macbookscreenproblem.wufoo.com/forms/zsnnv1p0gc67dc/
    Of course this DB is STRICTLY CONFIDENTIAL and will ONLY be used to contact Apple and show them that there is a significant amount of people with this problem and that we are demanding a solution to this.
    Let's join forces and fix this annoying problem.
    Thanks,
    Eduardo

  • Macbook Pro 2011 extremely slow wondering if hard drive failure

    Hello, I want to start off by saying I'm not a huge computer guru, so that is why I'm coming here first. My Macbook Pro worked very well for a year, and then it has slowed down drastically. I've always been a windows user so mac is kind of foreign to me, but I'm trying to learn.
    Some problems I've encountered are 1. Extremely slow running whether internet related, or just an application. I have checked the activity monitor and nothing is hogging up my memory. 2. Spinning wait cursor (rainbow circle) when I try to do ANYTHING. It takes minutes to start computer once it makes it to home screen. The circle just spins for a few minutes. Even just web surfing it's there. 3. Battery drains from 100% to less than 20% in 30 minutes, which again is annoying. 4. When battery drains the fan turns on and seems to drain battery even faster. 5. I get a lot of random errors forcing shut down of programs. I have ignored this problem for two years by not using my laptop or using it very minimally, but I am going to be needing a laptop again for school and not just my iPad and phone so I was planning on taking my macbook to genius bar, but wanted to check here first since Apple is an hour away. Plus I want to be able to use the piece of equipment that I spent a decent chunk of change on. I used time machine to back up everything today. I know its not a space issue as I have 300+ free GB on hard drive. I have tried to read through similar posts, but its overwhelming so I came here to post my own question.
    I ran disc utility and there were some errors, which were able to be corrected after a couple tries. Computer still slow though when trying to do anything and running rainbow circle.
    In recovery mode I reinstalled OSX
    I was finally able to install updates after completing the above that were not able to be installed before.
    I ran etre check, this is the report that came up:
    Problem description:
    Extremely slow computer, possible hard drive failure
    EtreCheck version: 2.0.11 (98)
    Report generated November 3, 2014 9:25:29 PM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      Mac OS X 10.7.5 (11G63) - Uptime: 0:6:50
    Disk Information: ℹ️
      Hitachi HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (357.49 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5970H 
    USB Information: ℹ️
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple, Inc. MacBook Pro
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.0) Support
      /Users/[redacted]/Downloads/LCC Installer.app
      [not loaded] com.Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0) Support
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.coreservices.appleid.authentication.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [running] com.Logitech.Control Center.Daemon.plist Support
      [invalid?] com.luthresearch.savvyconnectmenu.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [invalid?] com.luthresearch.scservice.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      SavvyConnect UNKNOWN (missing value)
      Google Chrome Application (/Applications/Google Chrome.app)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      QuickTime Plugin: Version: 7.7.1
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Growl  Support
      Java  Support
      Logitech Control Center  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          11% Safari
          3% WindowServer
          0% fontd
          0% Google Chrome
          0% ps
    Top Processes by Memory: ℹ️
      245 MB WebProcess
      206 MB System Preferences
      168 MB Safari
      99 MB mds
      82 MB Google Chrome
    Virtual Memory Information: ℹ️
      1.37 GB Free RAM
      1.57 GB Active RAM
      318 MB Inactive RAM
      1.03 GB Wired RAM
      436 MB Page-ins
      0 B Page-outs
    Basically I'm wondering if anything sticks out in this report. I was thinking it could be a possible hard drive failure. I know my computer has been dropped on the floor at least a few times. Thoughts are appreciated. Thank you for your patience.

    Eab, I feel your pain! I am replying simply to share my similar ongoing experience with my early 2011 17 inch MacBook Pro, running Mavericks with seeming ample hard drive space, [applications requiring less than 100GB, about 200GB data (total drive space of 500GB)] & 4GB RAM. (Disclaimer: I am not a wise or computer-savvy mac guru - simply a fellow traveler who has had a very similar set of problems - apps taking forever to load, rapid battery depletion & super overheated MacBook.  While I am a Genius Bar groupie, getting to the Apple store is, for me, akin to an antarctic polar expedition (i.e. problematic). Having spent endless hours struggling with a similar issue, I offer you a synopsis of my struggle/experience.
    STEPS TO DATE:
    1.Installed several memory utility programs (Daisy Disk &  MacCleanse) system
    maintenance program to regularly and thoroughly empty application caches (Adobe apps & internet browsers being tremendous hogs), identify and remove language elements and other redundant space hogs, etc.   Result: Small, but real improvement when I forced myself to perform a "scan and delete" session every second major computer run (typically about 6-8 hours in length). However, this did nothing to help the problems regularly detected when I run the Disk Utility which almost invariably demonstrates disk permissions that need to be repaired and, with increasing frequency, has demonstrated actual disk errors that require restarting and walking through a disk repair protocol. I did bring it to the Genius Bar where they kindly reinstalled Mavericks which they could do in about an hour versus the several hours that doing this at home requires.  This did identify that my RAM was, on fact, a limitation on the speed at which I could run certain apps.
    2. My next move was to install an additional 4GB of RAM. I bought the new RAM on eBay for about $90 because, with 3 kids equipped with MacBooks & iPhones, I simply couldn't afford the official Apple RAM. I even installed it myself, with the help of a YouTube video. Result: Giant improvement in speed (starting up or switching apps. If I had realized how simple it turned out to be, I would have done it well over a year ago. Some minor improvement in the overheating problem, but persistent problems with disk permissions continually requiring repair and periodic disk repairs (using Disk Utility) required.
    PLANNED FINAL INTERVENTION:
    3. I am purchasing and installing a solid state drive (ssd) and simply chucking the original hard drive, after considerable discussion with my savvier mac friends. It has become clear to me that, sadly, every hard drive has a finite life affected by a variety of factors. I am, in fact, hard on my equipment - running multiple graphic apps simultaneously, transferring massive GBs of data between my laptop, time capsule and an array of hard drives. I will let you know how it goes, but can share that the decision to get a solid state drive followed many conversations with multiple Mac guru-types (in the hope of saving you similar painful tribulations). The cost varies according to the size of the drive, but $400-$500 would buy a reasonable starting size. I am waiting for Black Friday sales, myself. Amazon (where I will likely purchase the ssd) is already offering a number of pre-Black Friday deals.  While I don't really feel like putting out that amount of cash, I reassure myself that a new drive will almost certainly solve the disk errors (with a solid state one offering more durability) & will help me prolong the life of my MacBook Pro by a couple of years hopefully. It beats buying a new Apple MacBook only three and a half years after investing close to $3k for this one!
    I am certain that more experienced forum users could point you to software that could help defragment your drive or may be able to offer other solutions. I've simply had enough of struggling with burning thighs and head-banging behavior triggered by slow performance. I hope this is helpful to you in some small way.  The war is not yet over, but I'm feeling good about the battle plan!

  • My macbook pro is extremely slow

    My macbook pro has gotten extremely slow and every thing I try to do I get the spinning color wheel. After I close the lid and when I re open it it takes forever to load.  The wheel just spins and spins. What do I need to do to correct this problem. I am running mountain lion 10.8.2. How do  What are things I can do to clean up the computer and make it run more effeciently.
    thanks
    Glenda

    See "Boot drive is getting filled up"
    Why is my computer slow?
    See "Storage Drive" here
    Most commonly used backup methods
    If you can't boot the computer,
    see 7b here
    Step by Step to fix your Mac
    and/or
    Create a data recovery/undelete external boot drive
    to free up room on your boot drive.

  • My MacBook Pro is EXTREMELY slow after installing Yosemite.  I ran EtreCheck, but don't really know how to proceed.  Help?!?!

    Problem description:
    Load times for programs and websites is significantly slowed after Yosemite install.
    EtreCheck version: 2.0.11 (98)
    Report generated November 18, 2014 at 12:47:02 PM CST
    Hardware Information: ℹ️
      MacBook Pro (Retina, 13-inch, Early 2013) (Verified)
      MacBook Pro - model: MacBookPro10,2
      1 2.6 GHz Intel Core i5 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD spdisplays_2880x1800Retina
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 6 days 2:35:1
    Disk Information: ℹ️
      APPLE SSD SM256E disk0 : (251 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 249.77 GB (185.10 GB free)
      Core Storage: disk0s2 250.14 GB Online
    USB Information: ℹ️
      HP HP Officejet Pro 8610
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [not loaded] com.intego.Family-Protector.safe-boot (2271 - SDK 10.8) Support
      /System/Library/Extensions
      [loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.intego.commonservices.integomenu.plist Support
      [running] com.intego.commonservices.taskmanager.plist Support
      [loaded] com.intego.commonservices.uninstaller.plist Support
      [running] com.intego.Family-Protector.agent.plist Support
      [running] com.intego.netbarrier.alert.plist Support
      [running] com.intego.netupdate.agent.plist Support
      [loaded] com.intego.personalbackup.agent.plist Support
      [loaded] com.intego.virusbarrier.alert.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.intego.commonservices.daemon.integod.plist Support
      [running] com.intego.commonservices.daemon.taskmanager.plist Support
      [loaded] com.intego.commonservices.icalserver.plist Support
      [loaded] com.intego.commonservices.metrics.kschecker.plist Support
      [running] com.intego.Family-Protector.daemon.plist Support
      [running] com.intego.netbarrier.daemon.logger.plist Support
      [running] com.intego.netbarrier.daemon.monitor.plist Support
      [running] com.intego.netbarrier.daemon.plist Support
      [running] com.intego.netupdate.daemon.plist Support
      [running] com.intego.PersonalBackup.daemon.plist Support
      [loaded] com.intego.virusbarrier.daemon.emlparser.plist Support
      [running] com.intego.virusbarrier.daemon.logger.plist Support
      [running] com.intego.virusbarrier.daemon.plist Support
      [running] com.intego.virusbarrier.daemon.scanner.plist Support
      [running] com.intego.WashingMachine.service.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      Boom Application (/Applications/Boom.app)
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Application (/Applications/Dropbox.app)
      ElementsAutoAnalyzer Application (/Applications/Adobe Elements 12 Organizer.app/Contents/ElementsAutoAnalyzer.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
      SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
    Safari Extensions: ℹ️
      Adblock Plus
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine: ℹ️
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 249.77 GB Disk used: 64.67 GB
      Destinations:
      My Passport [Local]
      Total size: 249.38 GB
      Total number of backups: 3
      Oldest backup: 2014-01-06 19:50:48 +0000
      Last backup: 2014-01-09 23:24:23 +0000
      Size of backup disk: Adequate
      Backup size 249.38 GB > (Disk used 64.67 GB X 3)
    Top Processes by CPU: ℹ️
          4% WindowServer
          1% coreaudiod
          0% fontd
          0% Boom
          0% netbiosd
    Top Processes by Memory: ℹ️
      627 MB WindowServer
      472 MB virusbarriers
      223 MB Mail
      129 MB com.apple.WebKit.WebContent
      129 MB Safari
    Virtual Memory Information: ℹ️
      414 MB Free RAM
      4.25 GB Active RAM
      1.06 GB Inactive RAM
      1.29 GB Wired RAM
      12.00 GB Page-ins
      602 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|sserti|suhel| VALI|ver-r|xpma' -o -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Macbook Pro running extremely slow since updating to Yosemite

    Hello All,
    I am new to the community and I'm hoping your pooled expertise can assist me with my issues. I went ahead and posted the results of my diagnostic scan below. My main concerns are that my Macbook Pro is now extremely slow after OSX updates. Also, laptop is running extremely hot to touch. I have mentioned other ongoing issues. I offer thanks in advance for any assistance.
    Problem description:
    Macbook Pro 13":
    Purchased in mid-2010.
    Most Recent Issue (Main Concern):
    (1) I recently updated OS X from Mountain Lion to Maverick. Computer began running extremely slow and “jerky.”
    (1.1) Shortly after this I updated to OS X Yosemite. Computer runs, and types, even slower than before.
    Ongoing Issues (Greater than one year):
    (1) Extremely short battery life (may last two hours on full charge)
    (2) Macbook runs extremely hot to touch (fan runs continuously but can’t begin to keep it cool)
    (3) SD Card reader doesn't recognize/open an SD card when inserted.
    Lex Cschellings Requested the Following:
    No obvious elements in the list.
    This may well be a dying disk and/or a very bad battery.
    Do following:
    make a new etrecheck list and in the problem description put what Applications->Utilities->SystemInformation says about the battery (under the Power heading in the left panel): give cycle count and battery condition.
    Then post the link in a new thread.
    In the meantime the crash report is probably a French Dictionary issue (font? garcon garçon) you have installed, uninstall that and see if it happens again.
    Lex
    Battery Information is as follows:
    Battery Information:
      Model Information:
      Serial Number: W00324SYZD3LA
      Manufacturer: SMP
      Device Name: bq20z451
      Pack Lot Code: 0
      PCB Lot Code: 0
      Firmware Version: 201
      Hardware Revision: 000a
      Cell Revision: 165
      Charge Information:
      Charge Remaining (mAh): 3205
      Fully Charged: No
      Charging: No
      Full Charge Capacity (mAh): 4350
      Health Information:
      Cycle Count: 987
      Condition: Normal
      Battery Installed: Yes
      Amperage (mA): -2489
      Voltage (mV): 11143
    EtreCheck version: 2.1.5 (108)
    Report generated January 4, 2015 at 11:09:57 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: one day 1:57:26
    Disk Information: ℹ️
      ST9250315ASG disk0 : (250.06 GB)
      EFI (disk0s1) <not mounted> : 210 MB
      Untitled (disk0s2) / : 249.20 GB (85.96 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
    [killed]      com.apple.CallHistoryPluginHelper.plist
    [killed]      com.apple.coreservices.appleid.authentication.plist
    [killed]      com.apple.sbd.plist
    [killed]      com.apple.spindump_agent.plist
      4 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
    [killed]      com.apple.AssetCacheLocatorService.plist
    [killed]      com.apple.ctkd.plist
    [killed]      com.apple.icloud.findmydeviced.plist
    [killed]      com.apple.ifdreader.plist
    [killed]      com.apple.MobileFileIntegrity.plist
    [killed]      com.apple.nehelper.plist
    [killed]      com.apple.softwareupdate_download_service.plist
    [killed]      com.apple.softwareupdated.plist
    [killed]      com.apple.tccd.system.plist
      [killed]      com.apple.wdhelper.plist
    [killed]      com.apple.xpc.smd.plist
      11 processes killed due to memory pressure
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [running] com.google.Chrome.framework.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Google Drive Application (/Applications/Google Drive.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      Dropbox Application (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 10.1.7 [Support]
      AdobePDFViewer: Version: 10.1.7 [Support]
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      QuickTime Plugin: Version: 7.7.3
      OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
      Google Earth Web Plug-in: Version: 7.0 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% ARM
          5% Google Chrome
          2% launchservicesd
          0% AppleSpell
          0% WindowServer
    Top Processes by Memory: ℹ️
      90 MB Google Chrome
      38 MB Google Chrome Helper
      21 MB mds
      17 MB WindowServer
      17 MB System Information
    Virtual Memory Information: ℹ️
      25 MB Free RAM
      952 MB Active RAM
      944 MB Inactive RAM
      578 MB Wired RAM
      9.26 GB Page-ins
      278 MB Page-outs
    Diagnostics Information: ℹ️
      Jan 3, 2015, 09:13:10 PM Self test - passed

    Lex,
    I'm not sure if I did this correctly, or if posting this is what you meant, but here is the DriveDX Health report.
    ### SYSTEM INFORMATION ###
    Report Timestamp                     : January 6, 2015 3:09:15 PM CST
    Report Timestamp (ISO 8601 format)   : 2015-01-06T15:09:15
    Application Name                     : DriveDx
    Application Version                  : 1.3.0.444
    App SubBuild                         : 0
    Application Edition                  : 1
    DriveDx Knowledge Base Revision      : 1/1
    Computer Name                        : <BLOCKED>
    Host Name                            : <BLOCKED>
    IP Address                           : <BLOCKED>
    Computer Model                       : MacBookPro7,1
    OS Boot Time                         : 2015-01-06T13:54:46
    Time Since Boot                      : 01h 14m 29s
    OS Name                              : Mac OS X
    OS Version                           : 10.10.1
    OS Build                             : 14B25
    OS Kernel Version                    : Darwin 14.0.0
    ATA Command Support Tolerance        : verypermissive
    N of drives with S.M.A.R.T support   : 1
    ### DRIVE 1 OF 1 ###
    Last Checked                         : January 6, 2015 2:59:53 PM CST
    Last Checked (ISO 8601 format)       : 2015-01-06T14:59:53
    Advanced SMART Status                : OK
    Overall Health Rating                : GOOD 100%
    Overall Performance Rating           : GOOD 100%
    Issues found                         : 2
    Serial Number                        : 5VCK3CCN
    WWN Id                               : 5 000c50 029e6a4c3
    Volumes                              : Untitled
    Device Path                          : /dev/disk0
    Total Capacity                       : 250.1 GB (250,059,350,016 Bytes)
    Model Family                         : Seagate Momentus 5400.6
    Model                                : ST9250315ASG
    Firmware Version                     : 0008APM2
    Drive Type                           : HDD 5400 rpm
    Power On Time                        : 7,694 hours (10 months 20 days 14 hours)
    Power Cycles Count                   : 4,772
    Current Power Cycle Time             : 1.2 hours
    === DEVICE CAPABILITIES ===
    S.M.A.R.T. support enabled           : yes
    DriveDx Active Diagnostic Config     : Seagate HDDs config [hdd.seagate]
    Sector Logical Size                  : 512
    Sector Physical Size                 : 512
    Physical Interconnect                : SATA
    Removable                            : no
    Ejectable                            : no
    ATA Version                          : ATA8-ACS T13/1699-D revision 4
    SATA Version                         : SATA 2.6, 1.5 Gb/s
    Attributes Data Structure Revision   : 10
    SMART Command Transport (SCT) flags  : 0x103f
    SCT Status supported                 : yes
    SCT Feature Control supported        : yes
    SCT Data Table supported             : yes
    Error logging capabilities           : 0x1
    Self-tests supported                 : yes
    Offline Data Collection capabilities : 0x73
    Offline Data Collection status       : 0x0
    Auto Offline Data Collection flags   : 0x0
    Bay #                                : 1
    I/O Path                             : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice
    [Known device                       ]: yes
    [Drive State Flags                  ]: 0xc0000000
    [Last State Change Timestamp        ]: 2015-01-06T14:52:48
    [Last State Change Flags            ]: 0x40000000
    [Last State Change Diff Flags       ]: 0x1
    === CURRENT POWER CYCLE STATISTICS ===
    Data Read                           : 2.2 GB
    Data Written                        : 768.4 MB
    Data Read/Write Ratio               : 2.91
    Average Throughput (Read)           : 2.6 MB/s
    Average Throughput (Write)          : 865.2 KB/s
    Operations (Read)                   : 43,921
    Operations (Write)                  : 28,114
    Operations Read/Write Ratio         : 1
    Throughput per operation (Read)     : 52.2 KB/Op
    Throughput per operation (Write)    : 28.0 KB/Op
    Latency Time (Read)                 : 0 ns
    Latency Time (Write)                : 0 ns
    Retries (Read)                      : 0
    Retries (Write)                     : 0
    Errors (Read)                       : 0
    Errors (Write)                      : 0
    === PROBLEMS SUMMARY ===
    Failed Indicators (life-span / pre-fail)  : 0 (0 / 0)
    Failing Indicators (life-span / pre-fail) : 0 (0 / 0)
    Warnings (life-span / pre-fail)           : 2 (2 / 0)
    Recently failed Self-tests (Short / Full) : 0 (0 / 0)
    I/O Errors Count                          : 0 (0 / 0)
    Time in Under temperature                 : 0 minutes
    Time in Over temperature                  : 0 minutes
    === IMPORTANT HEALTH INDICATORS ===
    ID  NAME                                         RAW VALUE            STATUS
      5 Reallocated Sector Count                     0                    100% OK
    197 Current Pending Sectors Count                0                    100% OK
    198 Offline Uncorrectable Sector Count           0                    100% OK
    199 UDMA CRC Error Count                         20,154               100% Warning
    === TEMPERATURE INFORMATION (CELSIUS) ===
    Current Temperature                  : 31
    Power Cycle Min Temperature          : 29
    Power Cycle Max Temperature          : 34
    Lifetime Min Temperature             : 0
    Lifetime Max Temperature             : 46
    Recommended Min Temperature          : 3
    Recommended Max Temperature          : 62
    Temperature Min Limit                : 0
    Temperature Max Limit                : 65
    === DRIVE HEALTH INDICATORS ===
    ID   | NAME                                        | TYPE      | UPDATE | RAW VALUE        | VALUE | THRESHOLD | WORST | STATUS      
       1   Raw Read Error Rate                           Life-span   online        0x173A0E        120           6     99     100%  OK         
       3   Spin Up Time                                  Pre-fail    online           0            100           0     99     100%  OK         
       4   Start Stop Count                              Life-span   online         5,034           96          20     96    95.0%  OK         
       5   Reallocated Sector Count                      Pre-fail    online           0            100          36    100     100%  OK         
       7   Seek Error Rate                               Pre-fail    online       0x5391F35         79          30     60     100%  OK         
       9   Power On Hours                                Life-span   online         7,694           92           0     92    92.0%  OK         
      10   Spin Retry Count                              Pre-fail    online           0            100          97    100     100%  OK         
      12   Power Cycle Count                             Life-span   online         4,772           96          20     96    95.0%  OK         
    184   End-to-End Error                              Life-span   online           0            100          99    100     100%  OK         
    187   Reported Uncorrect                            Life-span   online           0            100           0    100     100%  OK         
    188   Command Timeout                               Life-span   online      0x500050192       100           0     94     100%  OK         
    189   High Fly Writes                               Life-span   online           0            100           0    100     100%  OK         
    190   Airflow Temperature Celsius                   Life-span   online           31            69          45     56    43.6%  OK         
    191   G-Sense Error Rate                            Life-span   online          239           100           0    100     100%  OK         
    192   Power-Off Retract Count                       Life-span   online         3,162           99           0     99    99.0%  OK         
    193   Load Cycle Count                              Life-span   online        720,544           1           0      1     1.0%  Warning    
    194   Temperature (Celsius)                         Life-span   online           31            31           0     44    31.0%  OK         
    195   Hardware ECC Recovered                        Life-span   online        0x173A0E         50           0     43    50.0%  OK         
    197   Current Pending Sectors Count                 Life-span   online           0            100           0    100     100%  OK         
    198   Offline Uncorrectable Sector Count            Life-span   offline          0            100           0    100     100%  OK         
    199   UDMA CRC Error Count                          Life-span   online         20,154         200           0    199     100%  Warning    
    254   Free Fall Sensor                              Life-span   online         2,441            1           0      1     100%  OK         
    === DRIVE ERROR LOG ===
    error log is empty
    === DRIVE SELF-TEST LOG ===
    #   | LIFETIME (H)   | TEST TYPE         | PROGRESS | STATUS                          | LBA of 1st error
    1          7694        Short offline         100%     Completed without error              -    

  • Have iMac, MacBook Pro, & Aiport Extreme Base Station - WHAT ELSE?

    I have an iMac, just bought a MacBook Pro (both have airport cards), and will have my Airport Extreme Base Station delivered soon.
    Do I need to buy anything else (i.e. cables) to setup my wireless network (iMac, MacBook Pro, Printer, Internet, Email)?
    Thanks for the information...

    Dear MacChad,
    What you will need is an Ethernet cable that connects your Airport Extreme Base Station to your "Internet connection device".
    What this "Internet connection device" is will depend on how you are connected to the Internet with your ISP. Typical ways would be via Cable modem (supplied by your ISP in most cases), or DSL modem (supplied by your ISP in most cases).
    Hence, the Ethernet cable will also be found with your "Internet connection device". This is the same cable that this device supplied for connection to your computer.
    Note that Wireless LAN is not secure, therefore it is recommended that you take all precautions to protect your network. Especially if you do not want to share it with your neighbours.
    Some suggested steps are:
    1. Create a "Closed Network".
    2. Assign a password to your network
    3. Create a generic SSID (aka. Network name). One that DOES NOT reflect the fact you have an Airport Extreme Base Station, any Macintosh products and your name.
    4. Turn on WPA encryption at the minimum. WEP encryption is too weak and is useless.
    5. Utilize MAC address filtering, but entering the MAC address of both your iMac and MacBook Pro into your Airport Extreme Base Station's MAC Filter list.
    I hope this helps.
    -- Vinko

Maybe you are looking for

  • Recommendations? USB 2.0 & Firewire PCI card for MDD Dual Boot G4 (1.25 Ghz

    Can anyone recommend a good USB 2.0 and Firewire combo PCI card? (at least 3 USB 2.0 ports and 2 FW) for my G4 MDD Dual Boot- 1.25 Ghz)? I have an Orangelink+ Micro USB 2.0/FW PCI card from the days of OS 9- that's supposed to be USB 2.0 under OS X,

  • How do I install a S-ATA harddrive?

    Im trying to get my computer (and windows xp h.e.) to find my new 160GB S-ATA Samsung harddrive. The manual that came with the HD said -Just change something in you BIOS. But my MSI manual says -"Please refer to Serial ATA/Serial ATA Raid manual for

  • How to merge user accounts ?

    hi all, on my computer there are 4 user accounts. i would like to merge two of the accounts if possible. thanks !

  • My clients can login to SMTP but not POP/IMAP

    My 10.5 Server died and I'm migrating my mail clients to another server with 10.6 Server. This server has been running for a while but without any mail services. I turned on Mail Services and am adding my mail clients to the user list. I have many vi

  • How to create a shortcut for specific words?

    Hi I need to create a shortcut for a number of long expressions. Example: - "BE" => "business ecosystem" - "OB" => "organizational behavior" - etc.