Macbook pro bluetooth cutting out

I have Bose Soundlink Wireless Mobile Speaker (bluetooth) connected to my 15" MacBook Pro Retina iTunes 11.0.5. I am also using bluetooth Apple Mighty mouse connected. The music is cutting off for less than a second periodically like every 10-15 seconds when I play music and listen via Bose SoundLink. I also noticed the warning from my computer that I lost my mouse connection and it reconnect. Does any one have the same issue? And deos any one figuered out what's going on? Is it a glitch in the OS 10.8.4?

Hi:
There are no dumb questions.....answers, yes, but not questions. 
SMC=system management controller.
Reset like this:
http://support.apple.com/kb/HT3964
Barry

Similar Messages

  • Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Does any1 have any idea what the problem is?

    Macbook pro keeps cutting out then wont turn on for a while then when it does same thing happens! Happens with charger plugged in or not and green charge light stays on even when it cuts out and cant be turned on! Does any1 have any idea what the problem is?

    Try SMC and PRAM resets:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/ht1379
    Ciao.

  • The internet on my macbook pro keep cutting out in OS 10.8..What to do?

    Hello,
    I purchased a new macbook pro about in early September and ever since I started using it in my home, the internet cuts out constantly.  I was using a aiport to connect wirelessly and then swithced to a router provided by  my internet company which is Time Warner.  I have the fastest package they sell but nothing seems to help.  The internet cuts out after about 5-10 minutes everyt time I use the internet and download speeds are nowhere near what they should be for the package I have.
    I'm using the newest OS (10.8.2).
    Any help is very much appreciated!
    Thank you

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article

    when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed

    marionfromclermont wrote:
    I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
    Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
    Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.

  • I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

    I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

    Will not work.  To my knowledge, dual converting like that isn't supported.  The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

  • I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

    i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

  • Are there any new Macbook pro laptops coming out soon?

    Are there any new Macbook pro laptops coming out soon? Because if there are i will wait to buy one.

    Applecomputer53 wrote:
    Are there any new Macbook pro laptops coming out soon?
    There are always new MacBook Pro models coming out soon. However with current 2011 models you can install the faster, Rosetta program loving OS X Snow Leopard with a hack, instead of the new clitchy and unstable OS X Lion.
    So you have a choice now, but for not much longer. If you wait another 6 -8 months, Lion will be stable and more programs will be compatible with it.
    If this is your first Mac, I would wait. If you can do a simple hack with another Snow Leopard Mac, then you can opt to get one now and revert it to Snow Leopard and have a stable machine.
    Else take your chances with Lion.

  • Macbook Pro bluetooth is not available

    Recently my MacBook Pro bluetooth became not available and I cant do any thing about it. Can anyone help me in this case ?

    HellO:
    Try resetting the PRAM and SMC.
    Barry

  • My MacBook Pro is spitting out my DVDs. I tried many discs and they all got spat out. Its an early 2008. The drive is a HL-DT-ST dvdrw GSA-s10n. Do I need a new drive?

    Hi.  Need some help here.  My MacBook Pro is spitting out my DVDs.  I insert them and they knock around awhile making whirring noises, then out they come.  Refuses to play them.  I've tried many.  I have an early 2008 model and the drive is a HL-DT-ST dvdrw GSA-s10n.  Do I need to get a new drive?  Thanks for any help or comments.

    My old Early 2008 MBP used to do that every now and then in the last years of its life. Got a dry-type optical drive cleaner, the kind that is a CD with 4 rows of very fine and soft bristles glued on the "business side". Memorex was the brand I got, good for 20-30 uses.  Ran it thru every time the drive acted up, never failed to restore functionality.
    Of course, the Mac would later go on and blow its logic board. And that was that.

  • Bluetooth cutting out during calls

    Am having issues with my bluetooth (plantronics 320) cutting out while on calls. i have a treo 680 and the bluetooth cuts out frequently. have used other bluetooths and have had the same problem. the bluetooth does not disconnect just cuts out, if i hang up and call right back it works fine. anybody else having this problem

    It sounds like the Bluetooth headset is not compatible with the device. To be sure check this list: http://kb.palm.com/wps/portal/kb/na/treo/680/att/solutions/article/41198_en.html.
    Another possibility could be the headset itself is not working correctly. By any chance can you test this headset with another phone or Treo?

  • My macbook pro keeps blacking out

    My 13" macbook pro keeps blacking out when I'm using it and the only thing on my screen is the cursor, could you please tell me how to resolve this problem?

    Go step by step and test.
    1. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"
    2. Reset PRAM. http://support.apple.com/kb/PH4405
    3. http://support.apple.com/kb/PH13977
    Best.

  • How do I resynchronize my iPhone and MacBook Pro bluetooth connection?

    I accidentally had my iPhone "forget" my MacBook Pro bluetooth connection, and I need it to reappear to resynchronize. My iPhone shows up as discoverable on my MacBook Pro, but it is not connected. When I have my bluetooth on on my iPhone 4S, the MBP doesn't appear in the list of my bluetooth devices.

    You can sync using iTunes  >   iOS: Syncing your data with iTunes  (via USB)
    Or wirelessly using iCloud >  Apple - iCloud - All your content on all your devices.

  • Is there going to be a new macbook pro retina coming out anytime soon?

    Is there going to be a new macbook pro retina coming out anytime soon?

    speculation or conjecture about future products or prices is not discussed or answered on this board.  Sorry.

  • What is application memory and why does my macbook pro keep running out of it?

    what is application memory and why does my macbook pro keep running out of it?

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • Why doesnt macbook pro bluetooth connect to android? they are paired but keeps dropping out.

    I am attempting to download a photo from android phone to macbook pro. they are paired, they recognise and connect for half a second then drops out. Macbook works with other apple devices just not devices from different companies.
    is this common a problem?
    It doesnt just work!!

    You have to enable bluetooth sharing to receive files to your mac
    Here are detailed instrcutions on how to do that.
    How to receive files via bluetooth to Macbook from external devices like Nokia, Samsung, HTC and Blackberry phones

Maybe you are looking for

  • Mac won't boot up if external hard drive is on

    I just purchased an external hard drive to use for my Time Machine backups. The "installation" instructions said that with the computer off, to power up the e.h.d., then power up the computer. Well, the computer is evidently trying to boot up from th

  • Problem while using v$parameter in a package

    Hi. I have to get some data from the v$parameter view inside a package but when I compile it, it throws me the error "PL/SQL: ORA-00942: table or view does not exist". However, the schema owner of the pacckage has privileges over that view because wh

  • Run applets without JRE

    Hello to all developers, I know that to run applets in IE we should have the JRE installed on our machines. But is there any way that we can run applets without the JRE being installed on our machines. I have also heard of something called as the Mic

  • Sealing exception problems - S.O.S!!!!

    Hi, I am trying to solve this problem of 'sealing exception' that I have been encountering with Unix/Tomcat/JAXP platform. The way I found out is through a thread in this forum itself. It says to unjar the 3 jar files in the JAXP folder (crimson, jax

  • LAP not retaining configuration

    Hello all , This is the second time in a couple of weeks i am facing the same issue. I have some 1142-lap that i have to deploy in my office. I have successfully deployed 5 out of 8 LAPs . Actually the LAPs was not discovering the controller automati