MACBOOK PRO bluetooth not finding any audio devices ?
Please help , my bluetooth on my macbook pro (mid 2012) don't seem to be finding any bluetooth devices ?
I have never had to use the bluetooth on my macbook before but the wife bought me a bluetooth speaker box this christmas thats been working fine with my i-phone and i-pad etc but my macbook bluetooth does not find any devices when searching in search mode ?
Yes i am running Yosemite
Hello! Please try a SMC reset: Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Similar Messages
-
Macbook pro can't find the audio device
Lately I have been having trouble with the audio. The sound doesn't work on the Macbook, and it can't seem to find any devices!
I tried plugging in headphones, but nothing helped.
In the time leading up to this fault, the sound in the mini jack was very poor, and sounded really bad.
When I plug my TV to the computer, by HDMI, I works fine. Even with sound.
Any suggestions?
Oh, and I can't adjust the sound - it simply tells me that there is no device.I've tried that, and I can't choose anything.
As I said, it can't find any devices. Tried to Reset SMC and PRAM - non helped -
I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message : "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
PLEASE HELP!Hi Delarey,
Please go to the following location and rename the folder to old_folder name
User/user library/Application Support and rename Adobe folder
User/user library/Preferences and rename the Adobe folder
Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
Make sure that you are in user library if you are not sure check the link below.
Access hidden user library files | Mac OS 10.7 and later
Regards,
Vinay -
My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components. -
My macbook pro is not charging - any help please!?
My macbook pro is not charging - any help please!?
<Edited by Host>Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again" when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
Anyone?
ThanksHi Stan.
I had the same problem as you did though I am using Adobe CC. I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version.
Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup ) first and updated my NVidea card to no avail. Eventually what did the trick was this...
After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it. Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again. I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care. That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
Let me know if this works.
Cheers and good luck -
Hello all,
When compiling Flex project with QTP automation libraries included (Flash Builder version is 4.5. QTP is 11, Adobe Flex 4.5 Plugin for HP QuickTest Pro is installed) the message as below pops up
Adobe Flex 4 Plug-in for HP Quick Test Pro
Adobe Flex 4 Plug-in for HP Quick Test Pro could not find
any Flex environment fields (TEAFlex*.xml).
OK
After accepting it there is Flex application shown in IE8.
Trying to record actions in the application gives no effect while TEAPluginIE.dll and TEAPluginQTP.dll are loaded during that.
What could it be providing that TEAFlex.xml is in the directory where the TEA* dlls reside?
Have a nice day!Adobe's official exam guide outlines exactly what you need to know:
http://www.adobe.com/devnet/flex/pdfs/ace_exam_guide_flex4.pdf
I took the Flex 3 ACE recently and found that the guide represents the exam content very well. It looks like there aren't a whole lot of changes in the Flex 4 ACE guidelines.
To answer your questions:
LCDS is not on the exam.
What they expect you to know about the AIR library is very basic. It amounts to simple operation of an AIR app, file system operations, customizing the native window, drag-and-drop, and security. I've never developed an AIR app and got by just fine.
Before taking the exam, I was already quite comfortable with much of Flex. Along the way I learned a few things that I haven't had a reason to touch. I found the exam to be quite easy, but I'm also a computer science guy and has also just experience Java certification which is much more difficult.
I breezed through the Training From The Source book and was happy with it. However, you will do just as well with the LiveDocs for free. -
Hola: Después de haber estado leyendo bastante acerca del error
Adobe Premiere Pro no pudo encontrar ningún módulo capaz de reproducir vídeo. Actualice los controladores de visualización de vídeo y vuelva a empezar.
No he encontrado ayuda sobre cómo solucionar este problema en un ordenador Mac Book Pro dotado de tarjeta gráfica Intel Iris Pro 1536 MB.
¿Podría alguien ayudarme a solucionarlo?
Muchas gracias.
Hello: After having reading a lot about this error:
Premiere Pro could not find any capable video play modules
I haven't found any help about how to solve this problem on a Mac Book Pro computer with an Intel Iris Pro 1536 MB graphic card.
Can anybody help me to solve it?
Thank you very much.Dual video problems - Do you have dual graphics adapters?
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-Mac Utility for dual adapters http://forums.adobe.com/thread/1017891?tstart=0 -
Premiere Pro could not find any capable video...
And yes:
I tried everything what was suggested at this Page:
Error "Premiere Pro could not find any capable video play modules" | Startup
So...
Yesterday everything was fine, today nothing works...
I can't start Premiere Pro CC, After Effect CC and the Media Encoder CC as well Audition CC starts after feeling hours of time...
Can anybody help me?
System Information:
OS: Win 7 64-bit Pro
CPU: Intel Core i7-4790K Box, LGA1150
Mainboard: ASRock Fatal1ty Z87 Killer, Sockel 1150, ATX
GPU: ASUS GTX770-DC2OC-2GD5 DirectCU II OC, GeForce GTX 770, 2GB GDDR6
SSD: Samsung SSD 840 Pro 128GB
HDD: WD Black 1TBHi ml-learningby,
Have you tried updating your GPU drivers?
Thanks,
Kevin -
Premier Pro CC will not open, even though all my computer software is updated. It comes up with the message every time I try and open it. "Adobe Premier Pro could not find any capable video play modules. Please update your video display drivers and start again." What does this mean? I have been searching the internet for an answer for hours. Urgent help needed.
Error "Premiere Pro could not find any capable video play modules" | Startup
-
My macbook pro will not detect any external monitors
My macbook pro will not detect any external monitors, worked 'once' when connect to a TV.
Have read a lot of web comments, most not very usefull.Hi a,
Check the setting in Sys Prefs > Displays.
Try a different adapter and/or cable. -
Macbook PRO can't find ANY Wifi network - only at home
Hi, i have a very strange problem with my *Macbook Pro*. I have 3 apple computers at home and one pc. On all machines Wifi works fine, except my new alu Macbook Pro. Important note is, when im with my macbook on other place, office, caffe, *Wifi works fine. But when im at home, this macbook simply can't find ANY network, it's blind.* Interesting thing is, all other computers are several years old and WiFi works fine on them. My friend also bought a brand new macbook pro, and this machine also couldn't fine any network at my home, or in other case when it found networks, it couldn't connect and recieve error message "Connection timed out". I noticed there is new Wifi network in our range, is it possible that this network can cause "blindness" on new macbooks?
*I have to say, I'm really glad you are trying to help guys.*
Well, router is almost on default settings, SSID is brodcasted and i'm not filtering MAC adresses. I tried changed channels, diffrent types of security or no security, no luck.
Guys, maybe i wrote it wrong, but this MacBook can't see ANY network. Around me there are 4-6 other networks which I'm able to see from other machines. So *problem is, this Macbook can't seen ANY network - not just mine.* BUT when i'm with this Macbook in office for example, or any other location, Wifi works....
And one more important thing, this happened suddenly. I was able few months ago to find any WiFi around me with this Macbook. No changes to router, no changes to mac. Problem is somwhere in the middle...try to focus on this: why i'm not able to see any of those cca 6 networks around me. I really think it has to do something with distorted signal and Wifi card used in new macbooks. It's really sick, because all other machines works perfectly (MB 07, MBP 06, PC, iPhone 3g)
I found a log on the router, and it's happening all the time:
+Sunday February 28, 2010 12:52:29 Unrecognized attempt blocked from 77.49.167.124:10179 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:52:39 Unrecognized attempt blocked from 84.74.154.198:51104 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:52:41 Unrecognized attempt blocked from 85.228.116.143:30977 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:52:45 Unrecognized attempt blocked from 82.19.214.16:49713 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:52:51 Unrecognized attempt blocked from 79.5.189.206:42386 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:53:01 Unrecognized attempt blocked from 82.231.42.177:48944 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:53:03 Unrecognized attempt blocked from 150.65.37.20:35339 to 82.119.105.172 UDP:51413+
+Sunday February 28, 2010 12:53:08 Unrecognized attempt blocked from 83.34.238.95:27314 to 82.119.105.172 TCP:38481+
+Sunday February 28, 2010 12:53:09 Unrecognized attempt blocked from 83.34.238.95:27314 to 82.119.105.172 TCP:38481+
+Sunday February 28, 2010 12:53:09 Unrecognized attempt blocked from 89.135.92.244:22231 to 82.119.105.172 UDP:51413+ -
New Retina MacBook Pro does not find WiFi after booting
My Retina MacBook Pro keeps looking for WiFis after it has booted, but does not find any.
I have to explicitly turn WiFi off and on again after booting to get it working.
When I put the MacBook to sleep and wake it, the problem does not occur.
Any hints what could be the problem?Not sure if this will help, but you can go into System Preferences > Network and, if you haven't already, create a new location (mine is called "home"), then from this location remove all connection methods from the left column except Wi-Fi. Also, click on "Advanced" and remove anything from the Preferred Networks list that you aren't using. Then click on "OK" and "Apply".
-
My macbook pro can not found any network WI-FI
My mac book pro can not found any network in wifi but after turn of and turn on WI-FI for more than 10th it can found network and of course my network
interesting is when i leave my room with my labtop without any trun of or on wifi, network can detect every WI-FI!!!
any ideia ??Hi alirezaDavid,
If you are having WiFi issues with your MacBook Pro, you may find the following article helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
- Brenden -
"Adobe Premiere pro could not find any capable video play modules"!!!
premiere pro cs6 tells me thatit "could not find any capable video play modules" and tells me to update my video display drivers(they are of the latest version - I checked)-. I have AMD RADEON HD 6750 with 1GB dedicated RAM. What do I have to do to make premiere pro cs6 work?
http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
Maybe you are looking for
-
I reinstalled OSX Lion and now safari will not open at all and sends a crash report to apple.
I am unable to open safari after reinstalling osx lion. i checked for any software updates and installed them and still safari doesn't open and just says it will send a report to apple
-
Setting Line Pattern for Lines
Hi All, How to set line pattern for Lines? I am trying to use Line Pattern to draw some thing like "======" ( with out gap though I used equal symbol to draw I don't have other way to show an example). I have tried setting line pattern it is not work
-
How do I get CC to open these files correctly? Is the client saving them incorrectly? My work around has now become a pain & I need to know why Illustrator CC tells me most/all embedded images are missing in files received by clients. Illustrator 5.1
-
Why is my cache clearing? I get low PLE
Monitoring the system today returned the following: In our production server we have 32GB of RAM SQL uses 26-27GB 6 GB (static) of that are "stolen" – used for other stuff that are not database caching or managing. 0.5GB (static) are used for locking
-
Issues with Adobe Revel subscription PLEASE HELP
I received an email 9 days ago that said my adobe revel premium subscription has been paid for. I am unable to upload my photos. Please help, this happened last month as well.