Macbook Pro - Bootcamp Issue

I have a macbook pro from late 2010 with the latest Leopard and would like to partition my harddrive for windows. I had done this once before and it worked fine. However, since I erased the original partition, I am unable to create a new one.

ERASE doesn't work.
you need to delete any extra partition.
extend the hfs to expand to use the entire drive.
Try again after that.

Similar Messages

Can't install windondows 8.1 on my macbook pro - format issue

Can't install windondows 8.1 on my macbook pro - format issue
Running latest version of Mavericks.
Followed the exact bootcamp proceduce.
Have official window 8.1 version on cd.
All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
I have two questions:
1/ How to start my mac again in normal mavericks mode?
2/ How can I overcome the windows installation issue?
Tried already a lot of hints found on the internet.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

Macbook Pro Wifi Issue

I incorrectly posted this in the wrong thread this morning.
I'm hopeful you might be able to help me diagnose a problem I'm having. I'll provide as much detail as possible.
I have a first generation MacBook Pro. As of this morning I was running 10.5.6 and up until this week was using a linksys router and a comcast cable modem.
I used to have a great wifi signal throughout the house (always full strength), and around 12-18 months ago noticed the signal would weaken. The best I would get would be minus the top bar on the signal, and usually only if I was directly above or next to the room with the router. There were no new phones or devices added that might adjust the signal. On the other side of the house, I would have no signal at all.
My wife has a nine year old ibook and has no issues connecting through wifi.
When I bring my laptop to her parents' house or to the Apple store, where they use Belkin on N or Airport Extreme, I get a full signal.
I've recently suffered a hard drive failure and had a replacement drive installed. The problem persists despite the software update.
Not knowing if it was a router issue or an airport card issue or a combination thereof, I went to the Genius Bar. The genius recommended I upgrade my router to Airport Extreme, and if that doesn't work to return it and he'd focus on the airport card or antenna. I could get the flat rate repair (no AppleCare at this point) for $320+ to repair the problem if Extreme didn't work.
I installed the Airport Extreme router and got a full signal in the basement, far side of the house, upstairs - everywhere. Until around 10pm. The signal died from the basement. If I walked into the room with the Airport Extreme router, I'd get a full signal. If I left the room, I'd get a partial signal. If I walked any distance (10-12 feet), the signal would die. I restarted both the modem and router with no change. I reinstalled the linksys router and got a depreciated connection. I restarted the Airport Extreme again and got a full signal throughout the night, morning, through restarts, and when I returned home from work.
Last evening after using youtube extensively it died again. Linksys would barely work if I switched back, and no matter how many times I restarted I couldn't get the signal to last outside of the area of the router. I left it in the basement overnight shut down, restarted this morning, and had a full signal.
I'm looking for any potential guesses as to what may be causing the problem. I don't want to replace the card if it's the antenna or sink too much cash into a machine if it's a heat related issue linked to Generation 1 syndrome.
During all of this the ten year old ibook works fine. I know a lot of macbook pros have issues with their wireless and don't want to sink in the cash if it's more complex than that. Any advice is much appreciated!

Hi nashie1002,
If you are having issues connecting to your WPA2 WiFi network after a recent update, you may find the troubleshooting steps and settings in the following articles helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Apple Support: About Wireless Diagnostics
http://support.apple.com/kb/HT5606
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
It may also be worth doing a search for the specific model number of your router to see if anyone has noted any issues with Mavericks.
Regards,
- Brenden

Why slow wireless download Macbook Pro Bootcamp Xp Leopard

Problem: wireless download speed is much slower running windows Xp on a macbook pro (bootcamp) than when running OS X. Example OS X = 1,164 KB/sec download, 496 upload vs Xp = 265 KB/sec download, 940 KB/sec upload.
I have a Macbook Pro Duo Core running OS X 10.5 with the newest Boot camp drivers for windows installed. Test was done using Speakeasy speed test, Safari/Explorer 7.
funny how only the download speed is slow under Xp, not the upload speed.
thanks for any help,
Paul

Here's a solution that worked for me, my chipset is a Broadcom 802.11n (4328). It's a 24" iMac (Pre Alu).
Hopefully it helps others. Broadcom have updated WHQL drivers (picked mine up from here, they have Vista versions on there too) and it was just a case of installing those and changing 2 settings.
Changing IBSS mode to 802.11a/b/g/n Auto:
http://img220.imageshack.us/my.php?image=configip9.png
Setting the Rate (802.11b/g) to 54:
http://img411.imageshack.us/my.php?image=54gmodeei7.png
Now my speed is on par with Leopard

Macbook pro shutdown issue

Macbook pro shutdown issue when I push the power button it immediately goes into sleep mode

Hello Marrio22,
Thank you for the question. With OS X Mavericks, the power button has new functionality:
OS X Mavericks updates the power button behavior on Mac computers.
Using the Power Button to Sleep & Wake
Tap the power button in Mavericks to put your Mac to sleep or to wake it up:
Tap the power button once to put your Mac to sleep.
Tap the power button again to wake your Mac.
Press the power button for less than a half a second to sleep or wake your Mac. This duration is similar to pressing the Space bar or Return key to wake your Mac. The power button works this way across all Macs using OS X Mavericks, including both notebook and desktop computers.
Accessing the Shut Down Dialog
Press and hold the power button for 1.5 seconds, to bring up additional options:
Forcing the Mac to Turn Off
Hold down the power button for 5 seconds to force the computer to turn off. Important: You may lose unsaved documents if you force the computer to turn off this way. Use this method of turning off your Mac only if it has become unresponsive for an extended period of time. Normally you should shut down the computer by selecting Shut Down from the Apple menu, or from the shut down dialog pictured above.
OS X Mavericks: Using the power button
http://support.apple.com/kb/HT5869
Thank you for using Apple Support Communities.
Best,
Sheila M.

MacBook Pro bootcamp windows cant see FAT partition

I have 4 partitions on my SSD
- 1) MAC OS
- 2) SHARED ETC (MAC OS EXT)
- 3) SHARED WORK (FAT)
- 4) NTFS BOOTCAMP
I created two additional partitions (ETC, WORK) after I setup windows via bootcamp, also after I've done that I did a workaround to fix MBR because I wasn't able to boot Windows natively.
But for some reason when I am booting windows it is does not see ETC and WORK partitions! It should be able to see at least WORK(FAT) partition?
How do I fix that?
I want to be able to access WORK(FAT) partition from Windows and ETC(MAC OS EXT) partition as well, if it is possible

Cant edit this question eny more, here is some more details http://apple.stackexchange.com/questions/112449/macbook-pro-bootcamp-windows-can t-see-fat-partition

Late 2008 MacBook Pro - Bootcamp (Vista-32bit) issues

Hey all -
I have a couple issues with my late 2008 MacBook Pro when I use bootcamp to switch to its Vista (32 bit) side. I've never been able to solve these issues myself, so I was hoping I could get some help here.
When on the vista side, when I close the lid the computer display will shut off but the actualy computer will continue to run, and after some time I will no be able to wake it from its sleep.
When I try to turn the brightness down on my screen, it will turn down but then turn back to full brightness a few seconds later.
Scrollng with 2 fingers on the track pad is erratic (I read there was going to be a fix for this?)
The laptop gets so hot to the touch that it is almost painful (I imagine this can't be good for the computer)
It has also become sluggish to the point where even simple games and those on steam won't work without incredible lag. Are there anyways to stop some processes to speed up the vista side?
Like I said, this is all while in bootcamp, not experiencing any of the issues on the OSX side.
Thanks for any help

Would love some help if anyone knows

Mid 2014 15" Retina Macbook Pro Bootcamp Windows 8.1

Okay, so this is part question and part rant.
The question part: Has anyone successfully installed windows 8.1 in bootcamp on a mid2014 Macbook pro?
The rant part:
This new macbook is awesome. Everything is great. Except that apple needs to get their $h1t together on this bootcamp crap. I am an engineer. It is a sad world that we live in, and there is little I can do to change it, but as of right now, Microshaft owns the corporate world. Software for engineering is developed for winblows. Hopefully that will someday change, but for now I have to put up with it.
I purchased this brand new macbook with the understanding that I would have to install winblows on it, and with the understanding that I would spend about half of my time there. This is not choice, it is necessity. When I purchased this computer I did so because I was reassured that windows would run well in a dual boot.
5 hours of my time has been wasted trying to make that a reality. Currently, I am sitting here watching my mac reinstall Mavericks after being forced to wipe the entire drive due to incompatibility bullpoop.
So far I have tried:
Letting bootcamp do it's thing. This resulted in a near perfect installation, followed by a notification that the boot configuration could not be updated. great.
booting again and trying to format the partition with winblows. Winblows cannot install because of the GPT setup.
delete partition leaving blank space, boot in efi, and then allow windows to make the partition. This resulted in windows making 2 partitions (so far so good) and getting all the way to the end before letting me know that I am right back to trial 1 and it cannot update the boot configuration.
So I go into mac to delete these two partitions. The main one deletes, and the little one wont.
So i go into recovery. Still cannot delete partition.
I was forced to TOTALLY wipe the drive, and I am not sitting here looking at a screen telling me that in 4 hours the mac will have downloaded and installed Mavericks, and I will hopefully be back where I started a day ago. This is ridiculous.
So far I STILL do not have windows, and I am not really any closer. This is total and complete bologna, and I am about ready to return the macbook, and but a piece of $h1t winblows machine simply because it will ACTUALLY do what I HAVE to do. It would suck, because I prefer the Macbook, but if it flat out won't do what I need it to AND apple won't put enough effort into their compatibility software, I am going to be forced to make a compromise.
I send this faithfully from my Late 2008 13" Macbook running the new OS that I am not allowed to mention in this post without my post getting autodeleted.... Don't get me started on that... What is happening to apple? I want to love you guys, really I do!
Somebody help me please... If not with the computer, at least send me a cocktail.
MacBook Pro (Retina, 15-inch, Mid 2014), OS X Mavericks (10.9.4), Bootcamp

This is probably late but I just finished installing Win 8.1 on my new Mid 2014 15" MBP. It still has a few quirks but it works. I just purchased my MBP and it is configured with 16Gb RAM, 1Tb SSD, 2.5Ghz CPU and the NVidia Graphic Controller. I am running the latest version of Yosemite. Here is how I was able to make it work:
1) I purchased an OEM Version of Windows 8.1 64bit Professional from Newegg.com. I needed an ISO in order to use bootcamp. For this I used my dedicated windows 7 machine and installed burnaware_free. This ripped an ISO from the Windows DVD. Some websites will say you can use the Microsoft Windows 7 USB Download tool. This tool will NOT work with an OEM DVD of Windows 8.1. I tried it 3 times and all times it barfed and told me the tool could not be used on my version of windows.
2) I used a 16gb Flash drive and plugged it into my MBP and started the bootcamp utility. (I used a 16Gb drive as I did read on a few web sites that stated you needed a Flash drive this big. I'm not sure why as it does not fill it but perhaps with a 8Gb drive there is some temp files created that cause a problem) When it gives me options I let it download the bootcamp drivers and when asked, I pointed it to my Win8.1 ISO that I created earlier. (A side note, you MUST let the Apple bootcamp utility create the bootable USB drive. Foolish me used a standard windows utility to create a bootable Win8.1 drive. Went all the way through the download tools, repartition, etc. The MBP reboots and then pukes telling me the USB I inserted is not a bootable drive. It will boot on a windows box but not on the MBP. I have no idea why but I know this to be the case.)
3) Windows should boot on the apple created USB flash drive. It will walk you through the install. The first thing you need to do is format the partition that the apple bootcamp utility created. You will most likely be given 4 partitions to choose from. Pick the partition that matches in size the one you created on the OSX side and select to format that partition. Once formatted you can hit next and go forward.
4) Just a note.... if your eyes are as old/bad as mine, when Win 8.1 is installing it is not smart enough to know to scale objects and so displays everything in the native retina resolution. I literally needed a magnifying glass to check the serial number I typed in to be sure it was correct.
5) Let the install do it's thing and finish. When it completes and reboots, it will default to boot into windows. This is probably not bad, as if you are like me there is then a whole host of things to install and multiple reboots are required. Before I did a bunch of installs however, I wanted to test to make sure I could go back and fourth between the two OS's. Here is where things get interesting. On my install, once bootcamp was complete and windows 8.1 was installed, booting my MBP no longer gives the gray screen on boot. The screen is now black. At first this had me fooled into thinking something was wrong. When it reboots and you just see the very faint change in the black screen you need to hit the alt/opt button. Better yet, just have it shutdown and then hit the on button and hold the alt button next. You will now be given two drives to boot from, the OSX side and the Windows side. The recovery disk is no longer present.
6) I picked the OSX side and booted into Yosemite. Everything on the Yosemite side is mostly right. OSX sees the bootcamp drive. I use the Paragon utilities that allow me to R/W NTFS from OSX and R/W HFS from Windows. On the OSX side I can R/W the Bootcamp drive without an issue. It is curious, however, that if I go to the system configuration and select Startup Disk, my windows drive is not visible. I don't know the reason but it does not give me an option.
7) I reboot the MBP again and this time I go into windows. On the Windows side Win 8.1, for some reason, is not seeing the OSX drive. I can to into System Management tools and the partition is clearly there but at the desktop level there is no HFS drive. For what I do this is not a huge deal but it is curious as with my old MBP, Win7 and Mavericks everything was visible on both sides. If I go to the BootCamp Utilities and select Startup Drive, the utility on the windows side DOES see the OSX partition and gives me the choice to make OSX the default boot OS if I want or I can select Windows too.
So far everything works, sans the inability to see my OSX drives on the Windows side. I've not used Windows 8.1 yet and so now I'm quickly discovering what all of the fuss is about. I don't want to turn this into a Win8.1 rant but holy crap..... what did Redmond do? Anyway, I found enough copious threads on the web to get 8.1 almost looking like 7 so I'm happy. This was a major PITA however.
PS - One last note. All of this came about because my poor mid 2011 17" MBP finally started suffering the graphic adapter fail that so many have been seeing. Really torxs my chain as I really loved this trusty laptop. Sans the graphic card issue I should have been able to run it another 5 years at least but turned itself into an unreliable time bomb that I just can't trust. Its a real shame but it is what it is. The new 15" MBP are very nice, very fast and very well built but I miss my 17" screen for certain.
I hope this helps someone so they don't have to go through the pain I did.

2011 MacBook Pro Bootcamped Win7 64bit dropping wifi under heavy use

Hi all,
I have a Macbook Pro 17" 2011 model which has bootcamp on it so I have OS X 10.6 on one partition and Windows 7 64bit on the other.
When using the Windows Partition.. It would seem if I leave a program running and don't touch the laptop, after a short period the wifi drops and disconnects. Steps i've taken to troubleshoot:
1. Tested all other devices on the network they remain connected when the macbook disconnects
2. Changed the power consumption on the device so that the computer doesnt have permission to turn the adapter off
3. Turned power reduction off in the drivers
4. Installed the latest version of Bootcamp
5. Uninstalled the broadcom wifi driver and reinstalled via bootcamp's driver directory
The program I am running is a macro that reads memory from a game and controls the game while I work. It does put quite abit of strain on the WiFi adapter as it sends a lot of commands.. I am wondering if it's being overloaded or something
Quite a few people seem to have the same problem :S

I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15".

Advice appreciated on a MacBook pro HDD issue

Hello,
I've just suffered my first real system problem and even though I have a few ideas for how to fix it I thought I'd post here and ask for some advice to see what you guys think.
First the problem... Basically my MacBook Pro's HDD has an issue and won't boot. I don't think it's a physical problem with the hardware (although I'm open to advice on this too), I think it just needs a reformat and fresh install of the OS. But obviously I need to get my files off of there first and this is the problem, but read on for more details.
So that's the problem in a nutshell, but here's the full detail.
It's a MacBook Pro, late 2011, 17", 750GB HDD, 8GB RAM, bought in Miami September 2011 while I was on holiday there (I live in the UK), came with Snow Leopard installed, was upgraded to Lion a few days after purchase and then upgraded to Mountain Lion about a month ago.
Last week I was using it when it suddenly restarted itself. I let it restart, then began using it again and about five minutes later it restarted again, but this time it didn't boot properly.
It stayed on the grey screen with the apple logo and spinning clock-type wheel. There was a progress bar at the bottom of the screen, it took ages to move, then finally got to about 33% and the machine restarted itself again.
I tried lots of restarts but every time it did the same thing or it never even showed the progress bar, and just had the spinning clockwheel forever.
So I held down alt and booted from Mountain Lion's recovery partition instead. I launched Disk Utility and tried to verify / repair the drive but it came back with errors and said that it couldn't fix them. Apologies, I realise typing this that anyone reading would probably quite like to read the error long but I can't remember it and I'm not currently at home. If needed I'll run it again and post.
Anyway, the basic point is that Disk Utility is giving a message saying to copy all my files off the drive and reformat because it can't fix it. Incidentally the SMART status of the drive is fine / normal. Not showing any problems there, which is why I'm hopeful it's not a hadware issue.
So I need to copy my files off, and this is the real reason I'm posting this thread, because I don't mind doing a reformat / fresh install of Mountain Lion, but my last backup is a couple of months old (I know, naughty me) so while it wouldn't be the end of the world to copy files back from that, I would lose a bit of data so would like to get them off the MBP's HDD now.
At this point, let me list the kit I have at my disposal:
- At home I have the aforementioned patient (MacBook Pro), a 2TB external HDD with USB2 / FireWire 800 and a NAS box that sits on my network. I also have one of those cables that lets you connect an internal HDD via USB (more on this later, as I suspect it's going to be my best hope).
- At work I have a Windows 7 PC which I do not have any admin rights to, A Windows XP PC that I do have admin rights to and an iMac that is running Leopard (10.5.8) and cannot be upgraded due to various boring work reasons I won't go into here.
So the first thing I tried was booting into the recovery partition, launching Disk Utility and trying to clone the HDD over to the external 2TB drive I have. Cloning the drive like-for-like gives an error message (again apologies, I can't remember it) and trying to copy to an image file on the external drive gets all the way to the end (takes ages because Disk Utility keeps going to sleep) but then when I try to mount the image it gives an error and fails, so I don't trust this method.
So booting to recovery and using Disk Utility seems to be no good.
I thought about trying to take the MBP to work and launching it in target disk mode, then copying files, however I read that you can only have one FireWire device (the target computer) connected when doing this and my iMac at work doesn't have enough internal HDD space to copy all my MBP's files off, so I would need to have an external drive connected to the iMac in addition to the MBP, which sounds like it's not a good idea, or not supported by Apple anyway.
I thought about making a bootable Mountain Lion USB stick as I have a 16GB USB stick I could use for this, however I don't know how to make the bootable USB using my iMac as it's on Leopard (can't be upgraded for work reasons) and doesn't even have the Mac App store on it for me to re-download the Mountain Lion install file.
I think I have the Snow Leopard DVD that came with my MBP so could probably boot off this, but does that allow me into Finder or anything that would let me copy docs from my internal HDD properly over to the external drive? Or is it just going to look similar to the Mountain Lion recovery partition, with Disk Utility and a few other options?
I don't know whether the Mountain Lion recovery partition lets me install Mountain Lion onto my external drive? Or a USB? I was a bit scared to start clicking through options to see whether it would ask me which drive I wanted to install to, just in case it doesn't and begins erasing the main HDD as one of the first things it does.
So this leaves the cable that allows me to connect internal drives via USB. This cable has saved my bacon in the past and I suspect it may be my best option once more. Obviously this means I'm going to have to open up the MBP and remove the HDD but I installed the extra RAM myself and I've installed full-size (3.5") HDDs in the past so I should be able to handle that, unless there's anything radically different with 2.5" drives I'm not aware of.
I've heard people mention DiskWarrior in the past but to be honest if I'm going to spend that sort of money I'd prefer to just put it towards an new, larger HDD, probably a 2TB model.
So there we are, thanks for reading this far. If you have any advice about another (or better) way to get my files off the MBP I'm all ears.
I've never actually done a fresh install of Mac OS before either, only upgrades downloaded from the Mac App Store so any advice around that might be handy too, but mainly it's the file copying I want help with as I'll probably just boot from the recovery partition to reformat and reinstall Mountain Lion.
Thanks

Yes, on your profile.. But, did you phone update just before this happened?
I want you to view this image on both your phone and computer: Fiery Sunrise | Flickr - Photo Sharing!
If it looks different, it is not your images, but rather your iPhone....
Benjamin

Mid-2010 Macbook Pro - Sudden Issues everywhere

Ok, so I've got a Mid-2010 Macbook Pro and just before Christmas all of a sudden issues just popped up everywhere. I'll give you a rundown of what all i've seen and what all I've done since.
So I start getting a message something like
- AppleSecurity - Unauthorized caller ...popping up intermittently. And then,
- Firefox, once you shut the window down you couldn't get open again, and when you quit the app the computer seemed to freeze
- ITunes wouldnt open
- App Store wouldnt open
- Safari would only open some webpages
- Steam worked 10% of the time.
- Powerpoint and Word would crash or not save etc.
- I had to push the button to restart to get the thing working again and from time to time it would freeze or crash shutdown at the grey screen.
- I kept getting small indications that the memory was full.
- Cant shut down or restart without holding the button
So I deleted stuff, generally cleaned up unneeded files etc. ... Same problems. I eventually got so exasperated that I just stuck everything I needed on a flash drive and wiped the user and started a new one.
Same problems but slightly better.... So at this point I go into the Apple Store and go to the Genius bar - The guy wipes runs a check on my hard drive and everything ticks the boxes barring battery which is at 74% roughly. Then he wipes everything off to a factory restart, updates it, then hands it back.
I get it back home and I have issues even setting up the user as if it was a new macbook. I have untick all the set time zone and network stuff to get it to work.
I get it back going and ... still problems... but slightly better. But I cant update flash, steam crashes, sometimes again things dont work. Safari sometimes doesnt open some webpages and I have to restart to get things to get working again.
Also, things seem to be a little better when I'm using the universities internet as opposed to the one in my flat.
SO...! Back into the Apple Store, Genius Bar, he runs a full check on the drive because he seen some I/O errors in the console. AND.. everything passes. He runs a full daignostic and still can't figure it out. He says he seen some weird messages about Steam causing problems in the console but that was it, which I dont think could be the problem because I was getting problems before I even reinstalled it after the factory wipe/reset. The network causing problems maybe?
What do I do people? No-one at the Apple Store can pinpoint whats going on?! I really want to get this fixed because I need this for uni and I can't afford a new one
Please Help!

poikkeus1,
After getting a "properly" functioning LB, the temps are much lower than that, even when beating onit doing live recording. idle 25-30 degrees max, beating it with a "pile of inputs" recording 65-70
The first machine i spent over 4 hours with a senior engineer doing an ARA, it was like someone took a shotgun and blasted the data all over the place.
I switched machines (after 30 days, which would say they knew they had an issue)
Second time temps off the map, and unexplainable "bizzare" behavior. (random)
second time same deal, all over the place.
Now everything seems happy, for months now. (I hope I just did not jinx myself)
It sure seems that would be the place to look, hence you should ask for the flat rate repair.
Best

Macbook Pro video issue with multiple Monitors and Powerpoint 2011

Hello all,
I have a major issue that is perplexing me. Whenever I hook up a second monitor or projector to my Macbook Pro 15" Early 2010 and launch a Powerpoint slideshow I lose video on both systems immediately and can only recover with a reboot. This is fully reproducable. It doesn't matter if I'm using the mini Display Port to DVI or VGA adapter, same results. Same results with monitors, TVs, or external projectors. I only experience this issue in MS Powerpoint 2011, no other applications. I have 8GB of Ram and a 2.66GHZ i7. It doesn't matter what my resolution is set to, same issue. I will post two error reports below for additional details.
Thank you for the help,
Eric
Interval Since Last Panic Report: 1489459 sec
Panics Since Last Report: 5
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:08:35 2011
panic(cpu 0 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5ea3000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x83701768 : 0x21b50c (0x5d4438 0x8370179c 0x223974 0x0)
0x837017b8 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x83701858 : 0xaee640 (0xe9c5c04 0xd551004 0x100 0xae881b)
0x837018a8 : 0xae5639 (0xd551004 0x100 0x837018d8 0x9c36d7)
0x837018d8 : 0x17169ce (0xd551004 0x100 0x438004ee 0x3)
0x83701a18 : 0xb0d2bd (0xd551004 0xd681004 0x0 0x0)
0x83701a58 : 0x9dce63 (0xd551004 0xd681004 0x0 0x0)
0x83701af8 : 0x9d946f (0x0 0x9 0x0 0x0)
0x83701ca8 : 0x9da2b7 (0x0 0x600d600d 0x7057 0x83701ce8)
0x83701d98 : 0xc94d1c (0xc1d00044 0xbeef0003 0xcaf0133e 0xcaf01340)
0x83701eb8 : 0xc94fba (0xee95804 0x18547e04 0x6d1c6460 0x8)
0x83701f18 : 0xc952a5 (0xee95804 0x18547e04 0x6d1c6460 0x83702180)
0x83701fc8 : 0xca94a9 (0xee95804 0x1844a8e8 0x8370233c 0x83702180)
0x83702238 : 0xc8ac0b (0x6d29e000 0x1844a8e8 0x8370233c 0x83702324)
0x83702398 : 0xc8ae49 (0x6d1de000 0x1844a800 0x1 0x0)
0x837023c8 : 0xc8d90a (0x6d1de000 0x1844a800 0x1 0x9e9de118)
0x83702408 : 0xcafb4e (0x6d1de000 0x1844a800 0x6d3f2274 0x140)
0x83702498 : 0xca13c1 (0x1855ec80 0x1844a800 0x0 0x1)
0x837024f8 : 0xca1628 (0x6d3f2000 0x6d3f277c 0x1844a800 0x0)
0x83702548 : 0xca1afc (0x6d3f2000 0x6d3f277c 0x8370286c 0x8370280c)
0x83702888 : 0xc9e945 (0x6d3f2000 0x6d3f277c 0x1 0x220673)
0x837028a8 : 0xc665a1 (0x6d3f2000 0x6d3f277c 0x18724240 0x500547)
0x837028d8 : 0xca0408 (0x6d3f2000 0x83702a1c 0x83702908 0x4ffa01)
0x83702918 : 0xc6a8de (0x6d3f2000 0x83702a1c 0x83702a1c 0x83702980)
0x83702a58 : 0xca3cfe (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b08 : 0xc66c93 (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b88 : 0x565a88 (0x6d3f2000 0x0 0x83702ddc 0x83702c14)
0x83702bd8 : 0x566327 (0xcf4e20 0x6d3f2000 0x1cac2d88 0x1)
0x83702c28 : 0x566bdb (0x6d3f2000 0x10 0x83702c70 0x0)
0x83702d48 : 0x285bce (0x6d3f2000 0x10 0x1cac2d88 0x1)
0x83703df8 : 0x21d8ba (0x1cac2d60 0x114625a0 0xfc330 0x8a03)
0x83703e38 : 0x210a3a (0x1cac2d00 0x0 0x1cab2ce0 0x10599fc0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.nvidia.nv50hal(6.2.6)@0x15e0000->0x19f4fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 6097571436804
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x147f000, size 0x65536) - last unloaded 133585664378
loaded kexts:
com.aventail.xgfilt.kext 1.0 - last loaded 362791442640
com.aventail.tun.kext 1.0
com.google.filesystems.fusefs 2.0.3
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.6
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
#2 Panic
Interval Since Last Panic Report: 1490834 sec
Panics Since Last Report: 7
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:30:57 2011
panic(cpu 2 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5e82000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x82f79bd8 : 0x21b50c (0x5d4438 0x82f79c0c 0x223974 0x0)
0x82f79c28 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x82f79cc8 : 0xaee640 (0xe4e0804 0xe624004 0x100 0x2)
0x82f79d18 : 0xae5639 (0xe624004 0x100 0x82f79d48 0x9c36d7)
0x82f79d48 : 0x171a9ce (0xe624004 0x100 0x438004ee 0x29eac3)
0x82f79e88 : 0xb0d2bd (0xe624004 0xe4db004 0x0 0x0)
0x82f79ec8 : 0x9dce63 (0xe624004 0xe4db004 0x0 0x0)
0x82f79f68 : 0x9d946f (0x0 0x9 0x0 0x0)
0x82f7a118 : 0x9db5fb (0x0 0x600d600d 0x7027 0x82f7a148)
0x82f7a1e8 : 0xc84975 (0xc1d00041 0xbeef0003 0x18512500 0x71)
0x82f7a288 : 0xc84e9f (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2c8 : 0xc5ce0b (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2f8 : 0xc84572 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a318 : 0xc5c418 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a338 : 0xc84e4a (0x6d204000 0x184fc000 0x2 0x2)
0x82f7a378 : 0xc5f7b9 (0x6d204000 0x184fc000 0x0 0x184fc000)
0x82f7a3b8 : 0xc5d269 (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a408 : 0xcafbed (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a498 : 0xca13c1 (0x1808d400 0x184fc000 0x0 0x1)
0x82f7a4f8 : 0xca1628 (0x6d3cf000 0x6d3cf77c 0x184fc000 0x0)
0x82f7a548 : 0xca1afc (0x6d3cf000 0x6d3cf77c 0x82f7a86c 0x82f7a80c)
0x82f7a888 : 0xc9e945 (0x6d3cf000 0x6d3cf77c 0x1 0x220673)
0x82f7a8a8 : 0xc665a1 (0x6d3cf000 0x6d3cf77c 0x18513100 0x500547)
0x82f7a8d8 : 0xca0408 (0x6d3cf000 0x82f7aa1c 0x82f7a908 0x6d3cf000)
0x82f7a918 : 0xc6a8de (0x6d3cf000 0x82f7aa1c 0x82f7aa1c 0x82f7a980)
0x82f7aa58 : 0xca3cfe (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab08 : 0xc66c93 (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab88 : 0x565a88 (0x6d3cf000 0x0 0x82f7addc 0x82f7ac14)
0x82f7abd8 : 0x566327 (0xcf4e20 0x6d3cf000 0x17ce2188 0x1)
0x82f7ac28 : 0x566bdb (0x6d3cf000 0x10 0x82f7ac70 0x0)
0x82f7ad48 : 0x285bce (0x6d3cf000 0x10 0x17ce2188 0x1)
0x82f7bdf8 : 0x21d8ba (0x17ce2160 0x1720f5a0 0x1fd590 0xa017)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x15e4000->0x19f8fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 404911465926
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1483000, size 0x65536) - last unloaded 107949333800
loaded kexts:
com.google.filesystems.fusefs 2.0.3 - last loaded 376650877354
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.GeForce 6.2.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.NVDAResman 6.2.6
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000

I "fixed" it, I did a fresh install and restore and that power point issue is gone. It works now without crashing but I am using Snow Leopard 10.6.4 now instead of 10.6.7. I'm going to update and see what happens.

MacBook Pro performance issues w/2nd monitor and FCP7

I have this MacBook Pro bought brand-new in January 2010:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
and until today had never attached a second monitor to it. Today I hooked up my Samsung 24" to do some dual screen editing in Final Cut 7.0.3. I was unable to play back my video at full speed in the second monitor, and after a few seconds of skippy playback I'd get that error message about unable to play back video at full speed and to check my RT settings. I was using a Mini DisplayPort to DVI adapter. My computer has no issues playing the video in the laptop's monitor at any resolution and any quality settings (I've never changed the RT settings or anything else in the menu ever but I tried every combination this time). I then tried using my TV as a 2nd monitor with an HDMI adapter. Same performance issues. I then tried my friend's newer 13" MBP 8,1 and it performed flawlessly with the same project & footage. I feel like my $3,000 computer should outperform a $1,200 one even if mine is a year and a half older. Any advice?
Chris

Wow, you posted this perfectly to coincide with an identical problem, albeit using Logic Pro 9.1.5 rather than FCP.
Last week, I purchased a 23" external monitor to use alongside my "flagship" 2011 15" hi-res, 2.3 i7 Macbook Pro with 8Gb of RAM.
It is connected via a mini-DVI to D-sub analog (not that that should matter?) and all appeared fine.
The first issue I had was with my MBP's fan now running CONSTANTLY, when I have the second monitor attached. Even when the machine is completely idle.
When using the machine to record audio, this is a fairly hefty problem and not something I had anticipated - indeed why would I anticipate such a thing?
What is far, far worse though is that over the last few days I have had repeated problems with performance drop-outs and errors in Logic and I have trying to fathom out why. Realising that the only major system change made, was the above monitor connection, I ran some tests.
I restarted my MBP, no other apps were running and with my new 23" monitor attached acting as main display with MBP built in display on as secondary
I loaded up a fairly demanding Logic project which was hitting 40% to 60% CPU usage when using the built in MBP display last week
I ran activity monitor and had CPU usage history open
The above project now repeatedly overloads and playback halts in a given 8 bar section - with CPU at 80% most of the time
I disconnected the external display, no shut down, I just let the machine switch to the built in 15".
Started the same project, the same 8 bar section and hey presto - CPU usage back down to 40% to 60%
The above was reflected in the CPU usage history with the graph showing CPU use down by about a half, when running this Logic project WITHOUT the external display.
There is a very useful benchmark Logic project that has been used as a test by many users to gauge Logic performance on given Apple hardware.
The project has about 100 tracks pre-configured with CPU intensive plugins, designed to tax the CPU.
The idea is that you load up the project with tracks muted, press play and then unmute the tracks steadily until Logic us unable to play contiunously because of a system performance error.
On my MBP, with the external monitor NOT attached, I can play back around 50 of the audio tracks in this benchmark project.
With the monitor attached, I can get about 22 tracks playing.... which is actually a far worse a performance drop (-50% I think!?) than with the first example!
I did also try with just the external monitor attached and not the MBP display and performance was about 10% better than with dual monitors - so still extremely poor, to say the least.
This machine is the flagship MBP and has a dedicated AMD Radeon HD6750 GPU which should take care of most if not ALL graphics processing - I mean it's capable of running some pretty demanding games!
Putting aside the issue of constant fan noise, there is no reason AT ALL, why using an external monitor should tax the i7 CPU this way - it's not as though Logic is graphically demanding... far from it.
I am on 10.6.8, Logic 9.1.5, all apps up to date via "Software Update".
I will of course, be contacting Apple...

MacBook Pro HD issues; won't boot to any drive; need to recover data

*Apologies in advance for the lengthy post. I just want to be sure I include as much detail as possible. Thanks in advance for reading all of this and offering any thoughts and suggestions.
I have a 13-inch late 2011 MacBook Pro running OS 10.7.
The computer recently began booting slower and slower until finally one day it did nothing but show the gray boot screen with the apple and a spinning circle and/or progress bar at the bottom. It won't do anything else. I assume it's the HD; no surprise there. What's killing me is that no matter what I do, I can't boot to any disk, internal or external, can't mount it in target disk mode, and can't repair it or recover data, which is a first for me with any HD. However, the computer still clearly sees the drive, and the drive sounds and runs normally (meaning no clicks; appropriate amount of whirs and such).
What I've done so far:
Reset PRAM — no help
Reset SMC — no help
Boot in Safe Mode — same result as regular boot: gray logo screen with spinning wheel
Disk Utility message:
Verify Disk — "Error: This disk nees to be repaired. Click Repair Disk."
Repair Disk — gets as far as "Checking catalog file" then shows "Keys out of order". Next is "Rebuilding catalog B-tree." Then "The volume Macintosh HD could not be repaired."
fsck — same as Disk Utility: "Keys out of order (4, 22016)", "Rebuilding catalog B-tree", then "The volume Macintosh HD could not be repaired." FILE SYSTEM WAS MODIFIED." ...over and over again
If I hold Option while starting the computer, it gives me only two drives to boot from, regardless of any other external HDs or flash drives I have attached: Macintosh HD (internal), and Recovery HD (internal partition). If I choose Macintosh HD, it's hit or miss whether it prompts the Disk Utility screen or just gray-screens forever. If I choose Recovery HD, it successfully runs Disk Utility every time. Here's the thing, though — if I attach an external HD, it doesn't see it during the initial Option-startup. However, from Disk Utility I'm able to select a startup disk from the menu to restart into. It sees the externals in there every time and lets me select them as startup disks, but upon restart it returns to the gray Apple logo screen with spinning wheel and/or progress bar at bottom. Sometimes it also sees the internal Macintosh HD here, but selecting that is useless. I can't actually boot from any disk, internal or external, running full OS or even just recovery software.
I've tried using TechTool Pro 8's edisk and ProToGo bootable drives, but again, the MacBook only sees them from Disk Utility only (not on Option-start), and I can select them, but it doesn't actually boot to them; it reverts back to gray screen.
I've installed a full version of OS 10.10.2 on an external hard drive, complete with DiskWarrior 4 on it, but same problem as above — it sees it in the "Select Startup Disk" menu, but not in the initial Option-start or successful reboot.
I've tried booting from a DiskWarrior 4 DVD using C-startup. It recognizes and spins the DVD from the get-go. Eventually it boots to it (after about 20 minutes or so of reading the DVD). I'm able to launch DiskWarrior 4 and start a rebuild. However, it goes all the way through "Step 6: Constructing optimized replacement directory... Overlapped files detected: 7 ...Step 7: Finishing construction ...Step 8: Reading from disc, one moment please..." and then the computer kernel panicked. This happened several times. I reset the PRAM again, then retried DiskWarrior DVD boot, this avoided a kernel panic and it got as far as "Comparing directories... Step 9: Recording any file or folder differences; 3,449,089,956 tests..." and then DiskWarrior and the computer both freeze and I have to force shutdown.
The drive will not mount to another laptop in Target Disk Mode.
Disk Arbitrator immediately sees the the faulty laptop HD, but won't let me mount or unmount it. It's just there, grayed out.
Data Rescue 4 is able to see the faulty laptop HD through Target Disk Mode, even though the drive itself will not mount to my desktop. I am able to scan the drive using DR4, and start a data recovery process. However, DR4 is dumping all recovered data into "User Defined" ai (Adobe Illustrator) files, which makes absolutely no sense at all. What's more, the files aren't able to be opened by any program. Even files that it hasn't recovered into ai files, like txt and mpegs, cannot be opened. I've tried recovering from both the drive itself and from a clone of the drive (made through DR4), with the same result each time.
So, all of that said, I guess my first question is what the **** is going on? The drive mechanically is functioning fine, but there seems to be an issue with its readability (and the directory/files?).
What's more, why won't this laptop mount ANY drive? I should be able to Option-boot into any drive, especially if the USB ports, drives, and OS's are all fully functional, right? Is there any workaround I'm missing? Even if the internal drive and data are just screwed, what's causing a total lack of mounting or booting of any drive, internal or external?

Holy crap, I got it to work.
Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

Late 2008 17" MacBook Pro Memory Issues

When starting up my MacBook Pro the power LED in the front flashed 3x then paused and repeated. I did some research and learned it was an issue with my memory. I have 2 x 2GB memory maxing out my MacBook at 4GB RAM. So I did the following:
Removed the 2GB memory from the top slot and it booted with 2GB ... so I assumed the one I removed was the bad one
I had a 256 MB RAM that came out of my Mac Min when I upgraded it with the 2 x 1GB I took out of my MacBook when I upgraded to the current memory. I stuck this in the upper slot and the MacBook booted with 2.25GB memory as expected
So I ordered a new 2GB memory and installed it in the top slot and I received the same LED error message ... 3x flashes followed by a pause
So i took the new memory and installed it in the lower slot leaving the top one empty and it booted normally.
I then took the older memory that was booting from the lower slot and installed it at the top slot ... 3x flashes followed by a pause
I'm at a loss now on what to do next. Any ideas?
Thanks in advance for your help.

No replies yet, but other people appear to have the same problem. I'm gonna give it a go as I've googled the problem more and there are a few guides out there. Worse comes to worse, I'll just solder the wires directly to the board.
EDIT: I'll post up a response once I've given it a try.

Macbook Pro - Bootcamp Issue

Similar Messages

Maybe you are looking for