MacBook Pro Boots to OSx Utilities

Hi,
My  My 2012 Macbook unexpectedly booted up into OSX Utilities and now when I try to verify or repair the Macintosh HD it says it cannot be repaired and to please back up any data possible.

Try using a data recovery product such as the ones listed here. Don't write anything else to the drive until the files are recovered or you choose not to recover them.
(113273)

Similar Messages

  • BlueTooth [BT] failed during use. Various links say "BT Not Available" - "No BT Hardware Found" etc. Have 3 yr. MacBook Pro Notebook with OSX 10.6.8 with built-in Bluetooth. HELP !

    Bluetooth [BT] failed during use.Menu bar icon remains as does two BT icons in Utilities folder. System Prefs. BT icon totally gone. Remaining icons say "No BT Hardware Found" - " BT Not Available" etc. Have 3 yr. old MacBook Pro Notebook with OSX 10.6.8 & built-in  Bluetooth. [ Close by iPad's BT remains functional. ]

    Yeah the Bluetooth hardware has failed and needs to be replaced. there is nothing you can do except replace the BT chip. Take it to Apple.

  • Macbook pro boots to white screen and a ?

    macbook pro boots to white screen and a ?

    Gus@MaggiesFarm,
    try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the white screen now?

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

    I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
    I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me.  It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

    Probably best to go to a library and submit your resume there.
    You can make many web browsers claim to be ie.  Here is how.
    TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
    "World's most advanced web browser. Finely tuned for the Power PC."
        --  works for me on 10.4.  Supports 10.5
    http://www.floodgap.com/software/tenfourfox/
    alternative download site:
    http://www.macupdate.com/app/mac/37761/tenfourfox
    OmniWeb uses the lastest Safari framework.  The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit.  The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
    http://www.omnigroup.com/products/omniweb/
    Safari 4.1.3 for Tiger
    http://support.apple.com/kb/DL1069
    iCab - The Taxi for the Internet
    http://www.icab.de/
    What is my user agent?
    http://whatsmyuseragent.com/
    You want to change your user agent to be ie.
    in tenfourfox
    tools > add-ons
    seearch for change user agent
    install
    user agent switcher
    tools > User agent switcher
    change to ie.

  • HT3263 I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection.  The two macs cannot find each other.  any suggestions

    Try this article - http://support.apple.com/kb/HT4889.
    If it doesn't help, post back in this thread.
    Best of luck,
    Clinton

  • I have a MacBook Pro running mac osx 10.8, Screen saver keeps reverting to national geographic photos.

    I have a MacBook Pro running mac osx 10.8, Screen saver keeps reverting to national geographic photos.

    Just found this solution on another website. I tried it and it works. No more polar bears and Savannahs!
    Apparently if you put it in the folder called "Desktop Pictures" it will work.
    So, copy whatever folder of pictures you would like to use as your screensaver and then go to:
    Macintosh HD>Library > Desktop Pictures
    Paste your folder into this folder called "Desktop Pictures".
    You may have to enter the administrator code (the password you use to open your mac usually).
    Then, go back to System Preferences, go to Desktop and Screensaver, click on the Screensaver tab on the top, go to the drop down menu beside "Source" (under the picture) and click on "Choose Folder". Navigate to the Macintosh HD>Library>Desktop Pictures and then click on the folder you just pasted in there. Click "Choose" and you're all set.

  • Upgraded my macbook pro 2012 to osx mavericks and since then I'm having troubles like: can't open mail or maps. recently if I'm trying to fill a onfo box from a web site safari stops working.

    upgraded my macbook pro 2012 to osx mavericks and since then I'm having troubles like: can't open mail or maps. recently if I'm trying to fill a info box from a web site safari stops working.

    Try backing up your data and upgrading to 10.9.2.

  • MacBook Pro 15" using OSX 10.4.11 and new apple TV issues w. home sharing

    I have a MacBook Pro 15" using OSX 10.4.11 and would like to pair it with my apple TV without spending over 100.00 dollars any advise on a software that can help me do that without the big ticket?

    First of all thank you for your assistance. I have a router and the network is configured, however my OS is 10.4.11 and I am unable to update I-Tunes to 10.2 because I do not have the correct OS. My current I-Tunes software version is 9.2 and when I try to update to I-Tunes 10.2.2 it requires Mac OS X version 10.5 or later. Do I have to buy the OSX 10.5 or is there an alternative to purchasing the whole OSX?

  • HT1338 After migration from MacBook 13' running OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 using Migration assistant, the Bluetooth assistant mentions "name not available" and it cannot detect my Magic trackpad. There is no mention of any mishap.

    I just migrated from MacBook 13' OSX 10.6.8 to MacBook Pro 15' Retina OSX 10.8.2 with the use of Migration Assistant. When attempting to install my Magic Trackpad, the Bluetooth Assistant mentions "name not available" so that the device cannot be detected.  In have disconnected the firewall.Thanks for assistance.

    Create a new, temporary admin account and see if you can set it up in that account.

  • MacBook Pro boot or shutdown getting slower and slower, is how is it, how to resolve?

    MacBook Pro boot or shutdown getting slower and slower, is how is it, how to resolve?
    MacBook Pro开机或关机越来越慢，是怎么回事，如何解决？

    Open your disk utility and verify your disk permissions - if errors are found - repair them and restart your macbook when it's done the repairs....
    see if that sorts it out for you...
    good luck

  • Why wont my brand new macbook pro boot to an external disk?

    why wont my brand new macbook pro boot to an external disk?  I have the 10.7.4 on both.  The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk.  So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick.  Now the brand new MBP doesnt start up

    I had the same issue.  The 2012 macbook pro has a different 10.7.4 build that is not yet available for public release.  It won't boot no matter how much you try.  You need to wait for Mountain Lion and create a start up disk from ML.  Apple most likely will release a 10.7.4 update for the 2012 models, but they are focused on ML now.

  • Can I read Kindle ebooks downloaded on Amazon on a MacBook Pro with Mac OSX version 10.6.8 without the ibook reader app?

    Can I read Kindle ebooks downloaded on Amazon on a MacBook Pro with Mac OSX version 10.6.8 without the ibook reader app?

    Amazon.com: Kindle for Mac - Read Kindle eBooks on your Mac

  • My macbook pro mid 2009 OSX Lion 10.7.4 randomly Hanging when backing up with Time Machine

    My macbook pro mid 2009 OSX Lion 10.7.4 randomly Hanging when backing up with Time Machine to Time Capsule.  Anyone else have this issue?

    bumping this up.  Same issues persist even with 10.7.5

Maybe you are looking for