Macbook pro boots with windows 7 but not with osx lion.

I have bought macbook pro 1year ago. it has dual boot, its booting with windows 7 perfectly fine but its not booting up OSX lion shows grey screen and wheel just keep moving.

Similar Messages

Can manually subscribe with Windows but not with Mac

For some reason I am able to manually subscribe to the below feed just fine with iTunes on my PC (Windows XP) but I get an error when trying with my iMac (OS X 10.5.8):
*http://feeds.feedburner.com/Metalspeak*
The error I'm getting with my iMac references "An unknown error occured (400)"
I was troubleshooting a different feed and am getting similar results: it works fine with the PC, but not with the iMac:
*http://feeds.feedburner.com/MetalsPeakPodcast*
The error I'm getting on this feed however states "The file might be corrupted, or a file type that iTunes cannot play"
Can anyone think of why these feeds work with Windows but not with Mac? Any advice is appreciated!

The problem lies with the URLs for your media files. The one for the top episode is
http://www.metalspeak.com/episodes/MetalsPeak 10 - GenresPeak.mp3
This URL contains spaces, which are not allowed in a URL. Browsers - and from what you say iTunes in Windows - handles this by substituting the code %20 for each space when requesting the file; iTunes for Mac does not.
You need either to change the filename for each media file, removing the spaces or substituting something such as an underscore, and then amending the feed accordingly: or at the least to amend the feed by replacing each space with %20.
It's the same problem in the other feed.

Firefox works at mcdonalds with windows but not with linux

I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.

''bsluss [[#question-1051190|said]]''
<blockquote>
I have Windows 7 Pro and Ubuntu 14.04 LTS on my laptop. I use firefox browser on both OS's. I am able to connect to internet when I use Windows OS and run firefox at McDonalds. But, when I try to use firefox and Ubuntu OS it will not connect while at McDonalds. Otherwise, the Ubuntu distro and firefox work fine everywhere else.
</blockquote>
Thanks for the response. To narrow this down a bit more, the wireless makes the connection to their router, but, mozilla does not bring up the splash page that is needed to accept their connection. Again, it only happens when running firefox with Ubuntu; not when running firefox with Windows.

New shuffle works with Windows but not with Mac

Just got a new 2nd gen shuffle. Initially it was formatted as Fat32 per Disk Utility on Mac. I reformatted to Mac OS (journaled). iTunes was recognizing the new shuffle on the mac and I created a playlist that showed it took up disk space in the "summary" tab. However nothing played on the shuffle when I disconnected it. I was trying to update the software but that function is greyed out. I tried to click "enable disc use" and when I applied it, it says it can't find the ipod. It wont let me update anything. The only thing I can do is create a playlist that the summary says is on the ipod but it doesnt play.
I then connected it to my Windows XP machine and it asked me to reformat the drive, which I did, then everything worked flawlessly. I would really prefer to download things to the shuffle from my Mac than Windows XP but it just won't let me. I tried using "iPod Updater" and the most recent one from the list was 03/2006 and that didn't help anyhting. "iPod Reset Utility" would not recognize the ipod to reset it even after I sucessfully set it to Mac OS journaled in Disk Utility.
I am very frustrated. This also happened to my Nano I purchased a few months ago and I have to organize it on the PC as well.
I am running iTunes 7.2

I have exactly the same problem with my two
computers, both of which are Macs. The shuffle is
recognised on one, but not the other.
Here's a screenshot of iTunes ->
http://www.simongbrown.com/blog/images/2007/shuffle-no
t-recognised.png
BTW, I also have an older white iPod in use on the
Mac that doesn't work.
I've tried a few things (including running iTunes
under a different user account, reinstalling iTunes)
but nothing seems to help. The only thing left to do
is reinstall the OS, but that sounds a little extreme!
That's way too extreme... Use the shuffle Reset Utility.
http://www.apple.com/support/downloads/ipodresetutility10formac.html

Laptop monitor stays black with Windows but not with Ibuntu

Can someone tell me why my daughter's Compaq laptop has no video, monitor is black, in Windows Vista but works fine with Ibuntu? The service shop said it is a bad video card but wouldn't that apply to the computer and not work in either operating system. I keep trying to repair it in Vista but this has me really puzzled. If it works with one OS shouldn't it work with the other?

Hello, @cliftram
I see that the screen is black on your daughters notebook. That you've installed another OS and it was working. I will try to help you with this.
The short answers to your questions, would you're right.
"wouldn't that apply to the computer and not work in either operating system" - Yes, if the issue was a faulty graphics's card neither OS would work.
"If it works with one OS shouldn't it work with the other?" -- same answer as above.
What this indicates, is there's an issue on the Windows side.
As i'm on sure where the black screen occurs, but try booting into Safe Mode. If you can do this, then something may be going on with the OS or driver.
If you got into safe mode, try a clean boot first. Restart and try starting up normally. If this works an application on the computer is causing the issue. If to doesn't try, using the HP Recovery Manager to restore all the drivers on the notebook. (if your model doesn't have this, pleas let me know).
If you cannot even boot into Safe Mode, the only option left (if you haven't tried it), is a System Recovery (for the Windows side). Make sure you back up prior to doing this.
Let me know what you're able to do.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Why does the FP 10 work with firefox but not with IE8

I down loaded the folowing for xp FP uninstall, FP plugin and FP debug from the link in one of your replys. now I can watch youtube with firefox but not with IE8. you asked me before if i was using 16 bit. whats that mean and how do I find out? please help I just want to watch youtube on IE!

Ok Shag, since you hadn't been on a Forum before, then I'll take some of what I said back:-) I wanted you to stay on one thread, you can get in trouble trying things that may cause you more problems than you had in the beginning. I just had your best interest at heart
I'll even overlook your all caps here:-) At least you responded
Now since you say you fixed it, what you should do is to confirm it is fixed by taking a look at your Flash folder. This contains all of the Flash files for IE and FF. Then make sure you have the IE add on and the FF add on. That way if you have any future problems, at least you would know it is not the Flash Player.
You should only have 2 .exe files for IE and 1 for FF.
For Video editing, I would check Microsoft and see what they have. Perhaps someone else will come along with other info for you.
No, I don't get paid here, since I am not an employee. Just a user helping others, since I had a problem at one time and after 4 hours of researching solved it.
Let me know if you want to check the Flash files.
Thanks,
eidnolb

I get sound from Youtube with Safari but not with Firefox

I get sound when using my MacPro with Safari but not with Firefox.

Did you check the volume setting in the player to make sure that the sound isn't muted?
You can try to clear the Flash local storage.
Flash Website Storage Settings panel:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
Flash Local storage settings Help:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help02.html

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

I wanna reinstall Mac OSx lion on MacBook pro, my problem is I dint purchase OSx lion with my apple Id before.so anybody can tell me how to purchase OSx with my apple Id on MacBook

Nope. You can purchase a Snow Leopard DVD for $29.00 through an Apple retailer or ordering from AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

Photos uploaded through icloud control panel are only synced with iphone but not with ipad

Photos which are uploaded through icloud control panel are only synced with iPhone but not with iPad. Photos taken with iPhone or iPad are synced with all devices. So, why I do not get the uploaded photos from my pc to iPad? I alredy disabled photo stream on all devices - same failure

If only one device is not getting updated data, you need to troubleshoot that device and not photostream itself.
Verify that ipad is connected to wifi, charged over 20 percent, camera app is closed and take a photo of the screen (or anything else, but then close that camera app).
Open photostream folder on that ipad and see if picture shows up. If you network is good, should not take long.
Don't forget that while your phone can use wifi and cellular (even it suppose to use wifi for photostream, cellular networks got much better since original photostream was implemented) - you ipad is probably wifi only.
If picture shows up - you ipad and photostream have no problems and you can go to other devices one by one.

BB does sync media with PC but not with Mac

my BB does sync media with PC but not with Mac. At my Mac I got 'Insert media card'. How can this be solved as PC is no problem?

I got the Bold 9790. I am not sure which OS, does that matter? Are there OS versions not compatible?

MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

Hi,
My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up.
Plugged on power or not, same issues.
No apps running.
When it goes to sleep itself i wake it up it freezes for few seconds
When i put it to sleep mode same issue.
With the lid same issue...
I already try setting up the sleep mode from 3 to 0 with terminal command it didn't work.
Can it be an hardware issue ?
Any ideas ?

Dear TheSmokeMonster, Dear all MacBook pro 13'' late 2011 users,
Here is the update.
As TheSmokeMonster mentionned (above) they asked me to reinstall MAC OSX Lion by shutting down the computer and holding cmd + R while switching it off. Then you choose the language and you are good to go for a looooonngg 4GB download (it took me 8hours yeah chinese ADSL :-/ )
Lion reinstalled itself automatically and restarted. - it did not solve the issue.
I called Apple Care again and we try to run the hardware diagnostic by restarting the computer and holding D. FYI do not try it as this command does not work on the new version of macbook pro.
Here is the intersting part! As the Apple Care already did everything they could to help me. We booked an appointment the my local Apple Store in Shanghai (a real one )
The Genius remake again the SMC and PRAM reset - same issues and he also tried to boot Lion from his own external hard drive - Same issues. So we started to think that it was a Hardware problem.
We tried another MBP 13'' late 2011 (last hardware update) in the shop to see if it works properly and it DOESN'T!
Yeah you heard me. I have been trying more than 10 MBP 13'' (2.4Ghz 4GB and 2.8Ghz 4GB) put them asleep and they all freeze on wake up!! it also does it on Mac book air 13'' it seems to be a global issue on all the new 13'' machines. A compatibility problem between Lion and the new hardware architecture of the 13'' ? just my guess.
Anyway FYI this issue doesn't occur on MBP 15 and 17"
I was just amazed by this global problem so was the genuis. We could not find any solutions cause even a replacement one will have the same problem. They told me i could change for a 15" but i had to go back to the Apple shop where i bought it which is 2000Kms away not really convenient So i file the cas and i took my MBP 13'' back with me.
They will contact me later for further explanation.
To be continued.

I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD as far as I know.

I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.

Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904

Typekit works with Dreamweaver but not with Muse?

Why is it that I can use all Typekit's fonts together with Dreamweaver and not with Muse?
The fonts currently available via the TypeKit font menu in Muse (3.1) are of very low quality. 98% of them are "display type fonts" at best in my humble opinion. I need high quality fonts when designing high quality projects for my customers.
If I want to use Minion Pro or Futura in my Muse projects — are there any workarounds that does not get lost when I update the site with Muse? For example via the "HTML for <head>" field via the Page Properties dialog window in combination with some other Muse features?
Does the Adobe Muse Team (or someone else) have a step-by-step guide how to accomplish this?
Thanks a lot!
Kudos to The Adobe Muse Team – Muse is a fantastic piece of software. Easy to work with and really fun to use. Looking forward to the next update!

This is strange, but hopefully good.
I searched for Typekit, fonts and Muse etc on the forums before posting and did not get any relevant hits. But now I think I've found the workaround in the column to the right of this very post under the headline "More Like This".
http://museinsider.com/how-to-add-typekit-fonts-to-your-muse-site.html

8.5 Report works with OCX but not with CRAXDRT

Post Author: kjwatson
CA Forum: Older Products
I have an application using Crystal Reports 8.5. It uses the crystal reports OCX to view and print reports.I added the CRAXDRT to the application so I could export PDF files. It works fine except that Running Total Fields and Formula Fields to not seem to evaluate correctly. Formula Fields only work if they reference a Database Field. If they reference a Running Total Field, they do not evaluate. I'm initializing the connection of the tables on the report and sub-reports. Could I be missing something else? The reports work fine with the older OCX, but not with the CRAXDRT. Any help/ideas are appreciated!Thanks,Kevin

Post Author: kjwatson
CA Forum: Older Products
I have an application using Crystal Reports 8.5. It uses the crystal reports OCX to view and print reports.I added the CRAXDRT to the application so I could export PDF files. It works fine except that Running Total Fields and Formula Fields to not seem to evaluate correctly. Formula Fields only work if they reference a Database Field. If they reference a Running Total Field, they do not evaluate. I'm initializing the connection of the tables on the report and sub-reports. Could I be missing something else? The reports work fine with the older OCX, but not with the CRAXDRT. Any help/ideas are appreciated!Thanks,Kevin

Setting margins works with ExportToDisk, but not with ExportToStream...

I'm filling out a report with SetParameterValue, and not with database, and setting the margins with:
templateCredencial.ReportDefinition.Sections["DetailSection1"].ReportObjects[elementNumber].Top;
templateCredencial.ReportDefinition.Sections["DetailSection1"].ReportObjects[elementNumber].Left;
After that when i call ExportToDisk to write as pdf, the margins that i setted are there, but when i use ExportToStream like that:
MemoryStream stream = (MemoryStream)credentialTemplate.ExportToStream(ExportFormatType.PortableDocFormat)
And call stream.ToArray() as return in FileResult, the pdf that shows up on browser is without the margins that i setted. Does anyone have idea how can i return the pdf to the browser with correct margins without get file from disk, using only the stream?

I don't know because you did not say what the results were or answer any other questions I asked.
I said what the results were in first post:
And call stream.ToArray() as return in FileResult, the pdf that shows up on browser is without the margins that i setted. Does anyone have idea how can i return the pdf to the browser with correct margins without get file from disk, using only the stream?
And, where are you other questions? Sorry, i didn't see it.
Why can't you simply export to Disk and then stream that file?
I need performance, and if i need to write a pdf with 10mb, and after read it, and next return (with asp.net mvc 3) to browser like a FileResult, i 'll lose performance.
What is the right way to change the margins and return it like a byte array without losing the margins that i setted?

Msft ent desktop 7000 works with Macbook Pro 10.5.8 but not mini 10.6.1

I just purchased a Mac Mini with 10.6.1. I'm using it as an entertainment system hooked up to my 60 inch plasma. I bought a Microsoft Bluetooth Entertainment Desktop 7000 keyboard and mouse. i like the keyboard and it all works except for the integrated trackpad. At first i thought it was because it wasn't fully Mac compatible but when I tried it on my Macbook Pro 10.5.8 the trackpad worked fine.
Any suggestions??

Hi,
This is a guess: The MacBook Pro has a built-in trackpad, while the Mac Mini doesn't. Maybe it's missing a driver. When you have it connected to your MacBook Pro, try to look at your "Trackpad" system preference. Does that exist on your Mini? Also, try comparing the System Profiler outputs, especially concerning your USB.
It makes it a little more challenging when your systems aren't both the same OS level :-D, so some things will be different between the two systems just due to the OS levels.
David

Macbook pro boots with windows 7 but not with osx lion.

Similar Messages

Maybe you are looking for