Macbook Pro Browser Audio over Thunderbolt

I have a 15" 2011 MacBook Pro, and sometimes like to hook it up to my HDTV with my Thunderbolt to HDMI adapter. I can get the audio from iTunes to work absolutely beautifully, but can't get browser audio to work! This means no YouTube or Grooveshark. Does anyone have any ideas as to why this is happening?
Thanks.

Ehych is very correct.
On your $300 switch box, here is *one from MonoPrice* that is only $43!
I've purchased several cables & switch boxes from them - VERY good quality, price & shipping.
Steve

Similar Messages

HT5219 When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

When I connect my MacBook Pro to a TV (Thunderbolt to HDMI) no display is recognized and I am unable to mirror. I have a 2.9 GHz Intel Core i7 with 8GB 1600 MHz DDR3 running OSX v 10.8.3.

You are being scammed. Please ignore and close. Do not click any links or call any phone numbers!
Remove Browser Pop-up Problems
     AdwareMedic
     Adblock Plus 1.8.9
     remove adware that displays pop-up ads and graphics on your Mac

Which the best adapter vga to plug a data show on a macbook pro, mini displayport or thunderbolt?

which the best adapter vga to plug a data show on a macbook pro, mini displayport or thunderbolt?
Why?
Thanks pals.

Use the Apple Cable Chooser:
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.

How do i use my imac 21.5" 2011 as a display for my macbook pro late 2011, through thunderbolt cable ? I have tried and it doesnt seem to work, neither does target disk mode.
Could it be a borked cable ? I just bought it new from the store today, i have updated both imac and macbook pro to latest thunderbolt firmware and updates. Both 10.7.3.
MacBook Pro:
Vendor Name:    Apple, Inc.
Device Name:    MacBook Pro
UID:    0x0001000A17016E60
Firmware Version:    22,1
Port:
Status:    No devices connected
Link Status:    7
Port Micro Firmware Version:    FFFF.FF.FF

You are correct, here is what Apple Says:
http://support.apple.com/kb/TS3775
I was able to find these instructions, however they referr to 2009-2011 27" iMacs. I think it's the same, if it's not then contact Apple directly for instructions. If either of the machines is less than 90 days old or covered by AppleCare then call AppleCare tomorrow for help, they should be able to easily answer this for you. You will find the number in your manual or you can use the AppleCare Contact Info link.
Your iMac should automatically recognize the presence of a digital video signal at the Mini DisplayPort and enter Target Display Mode.
If your iMac does not automatically enter Target Display Mode, press command + F2 to manually enter Target Display Mode.

I have a macbook pro, a little over 2 years old, have been advised I need a new hard drive....after 2 years!!!!

My macbook pro is just over 2 years old....for the last couple of months it has been running very slowly,the beachball is in permanent residence!
I have been advised I need a new hard drive....after only 2 years I'm not at all impressed. Is this normal?

Over a very large sample of drives, these drives are very reliable, despite being moved around inside laptops.
You do not have a very large sample, you have ONE drive. Anything that happens, from having it run for twenty years to having it die on the first day, is within the normal range.
The rapid resolution to your problem IS to replace the drive. At your leisure, you may find that after re-writing every block with Zeroes (a process that can take half a day and has no guarantee of success) enough spare blocks can be found to return the drive to service. Or maybe not. If you are willing to invest the time and energy to do this, you may get a nice backup drive, or you may get a doorstop. No one can predict ahead of time.

My macbook pro is just over 3 years old now and off and on during this time the screen will just go all black. Lately this blackout is lasting longer and I was wondering what is causing this. I am afraid that this will not come back on in the future.

My MacBook pro is just over 3 years old now and the screen has totally blacked out for a few seconds at a time. It will come back on in a few seconds with the exception this past month it has stayed black for a longer period of time like one minute. It scares me to think that one of these times it won't come back on. I have noticed it happens more often when I am using just the battery power. Does anyone have any idea what causes this? just to mention my battery was not low when this happens.
Message was edited by: jmckl

jmckl,
if your MacBook Pro is a 15-inch Mid 2010 model (“MacBookPro6,2”), then it might be exhibiting the defect that is documented on this Apple Support page. If your black screen is due to this defect, then that page states that Apple will service this problem on this specific model of MacBook Pro gratis, for three years from the date of purchase. However, some commenters here have noted that sometimes the servicing is done gratis without having proof of the date of purchase. If you have an Apple Store near you, you might consider bringing your MacBook Pro there to have them check for the presence of this defect.
It is only the 15-inch Mid 2010 model that has this problem; no other model suffers from it.

How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?

How can I tell if the mini dvi on my 2010 13" macbook pro supports audio?

If it's a post 2009 Mac it supports audio on the HDMI port. See:
About Mini DisplayPort to HDMI adapters
Mac mini (Mid 2010)- Frequently asked questions about HDMI

Recently bought new macbook pro , transferred data over and thought microsoft office would work on new laptop. Icons are there , although don't have my key codes!! should i just buy new software package ?

recently bought new macbook pro , transferred data over and thought microsoft office would work on new laptop. Icons are there , although requires key codes and I don't have my key codes anymore as dog chewed the packaging!! should i just buy new software package ? I am told that this is a microsoft issue not a mac issue !! But all my other data on the old macbook pro transferred over even the icons for office for mac on the bottom app bar. only now I can't open any of my word or excel files without key code! I thought that there may have been something that could be done before having to bite the bullet and fork out for new software package.??

If this is Office for Mac 2011 then it will work on your new computer. Reinstall it. If you don't have the key code call Microsoft's activation line to get a new key code. Explain that you lost the original key code and want to install Office on your new computer.

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l nudge cursor

Brand new 15" MacBook Pro Retina - unplugged from Thunderbolt Display and Keyboards today find keyboard alpha-numerics not working; except the function keys, delete key, tab key, command/ctrl/shift/alt/fn and arrow keys; and 7/8/9/u/o/j/l produce cursor nudges.

It's a new machine - and the Thunderbolt Display is meant to work with it. You need to just make an appointment at your local Apple Store and have them fix whatever is wrong.
If you like, you could always try a SMC reset and a PRAM/NVRAM reset to see if either of those will get your keyboard back in working order...
Clinton

HT202730 Macbook Pro Optical Audio Output Toggles On/Off

My Macbook Pro optical audio output seems to switch off with a loud click when sound is not playing for a few seconds.
Then, when sound resumes, there's a delay as it switches back on.
Is there a way to stop this toggling?
And please don't tell me to check the connections.
I've already tried different sample sizes and bit rates to no avail. It seems as if the system is switching something when there is no audio being played, then switching it on again. Even if the playback is only on pause.

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

The Superdrive on my MacBook Pro ejects audio CDsa few seconds after they are inserted. This happens with both prerecorded CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes.

The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
Fabrizio

You could also try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US

Logic Studio, MacBook pro, M-Audio ProFire 610, M-Audio Axiom 61

I'm just about to get the above: Logic Studio, MacBook Pro, M-Audio ProFire 610 and the M-Audio Aziom 61, and want to know if any of the above (Logic Studio and MacBook Pro excluded) are a big mistake. I've been using an Aluminium Powerbook 17" 1.33MHz, and M-Audio MobilePre USB, and an Edirol controller, with guitar rig (and Controller), and Logic Express 7.
I need a set-up that will work as well in the studio, as it does on stage. We tend to plug everything in to the powerbook at the moment, and use Reason to power the synths, guitar rig for the guitars and bass, and logic express plugins for vocals etc.
Anyone have any experience with any of the above?
Cheers,
Adam

Hi Zuelito,
Please read my first paragraph again:
"I gotta RESPECTFULLY take issue with every point you bring up about M-Audio stuff, Zuelito..."
I'm not sure how you can be "slightly put off by the tenor" of my post given everything I said, with the one possible exception being my line about MOTU making crappy hardware - and that was based on personal experience. And while we're talking about the opinions of others, feel free to peruse the Unicornation board - it's full of MOTU users talking about firewire port failures and other hardware issues - so it appears neither of us is alone in our experiences
Seriously, if I was in some way brash or offensive in the way my post came off, I publicly and sincerely apologize. I really try to think about what I say (and how I say it) when posting on the 'net, for this very reason. I thought I simply stated my experience in an informative manner; again, please re-read my post - I hope it comes across as intended.
For what it's worth, I will say (even more clearly) that I've always loved MOTU products in terms of feature set; maybe that's why I've owned almost every product they've ever made! However, in my environment, I simply can't risk hardware failures, and their stuff has let me down too many times to keep rolling the dice. I will also divulge that one of their top tech support guys has acknowledged the firewire port problem. That's a shame, because they do make great stuff, conceptually. I really wish I could take a chance on that new 896mk3, but it ain't gonna happen for me; 6 dead firewire ports is enough of a failure rate for me to give up on them. To be fair, this probably isn't an issue for fixed installations, but I have to make these connections daily while on tour.
Also, I did NOT categorically state that "M-Audio stuff is better than MOTU." Again, if you re-read my post, it should be obvious that all I'm saying is I have a newfound respect for M-Audio, as of the new ProFire series. I also said in my first paragraph that I shared your opinion of M-Audio for a long time!
If this were all about M-Audio's 410 vs. MOTU's Ultralite (or other competition), we probably wouldn't even be having this discussion as I would have agreed with you - but the original poster specifically asked about the newer 610 with Logic, which is what I'm using on one of my rigs. I simply offered my personal experience.
As for drivers, I've not had any problems with M-Audio or their level of support. Just the opposite - they really seem to be on the ball and are way more communicative than other mfrs. I don't know of any other mfr. that supports each OS subrelease in detail like they do, and their development speed seems as fast (if not faster) than anyone else.
Finally, until now I've only owned a few M-Audio pieces (410, 1814), but I can state that they've been flawless. Their audio quality was not 'high end' by any stretch, but I only used them for utility purposes (writing rigs on the road, etc.). Like I said, my main studio stuff has been RME or Apogee for years, and that's the quality level I'm used to - which is why the 610 really surprised me. I also have several friends who do a LOT of touring, many of which rely on M-Audio hardware (mostly 410s). One guy's unit doesn't even have any paint left on it from road abuse - but it still works like a champ after 4 years.
So anyway, this is all just my experience. Hope it doesn't come across as anything but that
Peace,
Jim

MacBook Pro Phantom Audio Problem - Audio decreases settings unchanged

I'm having a very strange issue with a MacBook Pro. Over the course of a presentation the audio output will slowly decrease until it is almost inaudible. I'm running the machine into a sounds system and I can turn up the MBP volume to compensate until I hit the max, but it continues to gradually reduce.
Could this be an overheating problem? The logic board on this machine was just replaced due to an issue where the optical out would not disengage so this is a brand new (less than a week old) logic board.
Any suggestions/solutions save having the board replaced again, or asking for a new machine?

I appreciate your response. I still have concerns:
The red-lite is off when my issue is happening.
The red-lite is on when my issue is happening.
It was not consistent. My concern is the Macintosh operating system not detecting the change. My other concern is it can _not_ be only a hardware switching issue, as Alsamixer, a software program, can make the switch toggle between off or on. If it was a hardware-only issue, Alsamixer would be a fail. And, if it is actually a hardware-only issue triggering a software 1 or 0 switch somewhere:
My final concern is 'where is this setting being stored' as clearning PRAM and reinstalling entire operating system after opertating system (Leopard to Lion and back to Leopard) after a disk wipe has no effect.
I guess it sounds to me, that OSX tries to be too user-friendly by not allowing peeps to change those options themselves. Is there a dscl command switch I can use to manually override such an effect? (Just in case I don't happen to have anything to stick into the mini-jack port)
Regardless, your answer is correct. Thank you both (Ciao and Allan Jones)
Jason

MacBook Pro Retina Audio issue after upgrade to Mountain Lion

Got my new MacBook Pro with Retina display just over a week ago now and was working brilliantly up until last night.
I upgraded to Mountain Lion via the App store as I already bought it for my other macs and didnt wish to wait to redeem my free copy.
Ever since the update the audio develops a stutter on any audio file no matter what format, program used or at any volume.
I am hoping this is just a software isssue and can be easily rectified. I have restarted it, tried a different user and pretty much anything else I could think of before posting this.
Any help would be greatly recieved.
Thanks
Luke

Using gfxCardStatus to force discrete graphics stops the audio stutter on my machine. I already returned one retina mbp for three dead pixels... Strange that graphics switching has something to do with the audio, especially since it was stuttering every 15 seconds or so, not when the nvidia kicked in...

Macbook Pro Browser Audio over Thunderbolt

Similar Messages

Maybe you are looking for