MacBook Pro C2D Wireless issues after 10.4.10 -  issue pin pointed !

I have a MacBook Pro C2D which has started to do random disconnects from my WLAN.
I am running the latest Tiger 10.4.10
No matter if I use the network connection actively by surfing, chatting, listening to netradio, downloading or if it is just idle, it randomly disconnects. Sometimes after 30 mins, sometimes after several hours.
It never reconnects it selves until I do it manually. But then it has no problem reconnecting.
It is quite annoying, especially since I sometimes run services like a web server (for development reasons) and sometimes want to download large files using either http, ftp or bittorrent. But I cannot trust it to finish the downloads, as it randomly disconnects.
It haven't always done these things. It has started occurring after the last couple of updates from Apple I think (don't remember excatly when).
I have 3 different accesspoints with different wireless chip sets, but it occurs on all of them. Also I have a couple of PC Laptops that dosn't have this problem on my network.
I pinned my issue to one specific setting in my wireless router.
In WPA mode, this setting affects the stability of my link:
ReAuthentication Timer
It is normally set to 1800 secs (30 mins) - and this makes my MBP disconnect every - yes - 30 mins...almost. Sometimes it tend to survive the interval.
The valid range is 10-9999 seconds in my router.
If set to 10 secs, it almost disconnects all the time - every 10 secs.
If set to 9999 I can work some hours without disconnects (my guess is 9999 secs, or 166 mins).
It seems like some update from Apple in the 10.4.10 release, efficiently broke the WPA encryption implementation of ReAuthentication.
It makes no difference to switch between WPA and WPA2.
Has anyone found a way to fix this from the OS X end, instead of compromising security on the Access Point end?

Zebra 1
Whilst I don't personally have the same problem reported here, that's a pretty offensive reply.
You might want to spend a bit of time here
http://discussions.apple.com/forum.jspa?forumID=1135&start=0
and let these people know that they have the best router in the business and that all their computers are working great before advising people to forget about trying to get to the root cause of an issue and spend a load of money instead.
I got a bit frustrated with a post on this forum a little while ago and posted a snotty reply. The original poster called me on it and told me that I didn't have to reply, once I thought about it, I realised the OP was correct and apologised.
Are you big enough to do the same?
Best of luck.

Similar Messages

  • Messages on my MacBook Pro is not working after factory reset, how can I enable it?

    I just recently (yesterday) got my MacBook Pro Mid-2012 restored after having a few issues with it. So it is totally "clean."
    Today I tried to open Messages which worked previously, but it wouldn't let me send a message to anyone (who I could message before the restore) and if I was able to send a message it would show an "Message Can't Be Sent" symbol next to it. I went to Messages > Preferences > Accounts > and saw that my account was enabled but my email used is in a grey font and it will not let me add my iPhone number.
    I have signed in and out, deactivated and reactivated the account and I still cannot message anybody.
    Please help guide me into fixing this, I have looked at other boards and it doesn't really help me with my predicament. How can I send a message?
    Also in the Messages menu, "My Status" is grey and I can't click anything and as well with the "Log In" option. If this can help developing an idea of what might be wrong.

    It won't send it to other emails, but it will for phone numbers. Not sure why, but if you can help with sending to other iMessage emails I would appriciate it :-)

  • New MacBook Pro C2D Startup issues

    Hi,
    I have my MBP for 3 weeks now and normally leave it on all the time (on and off the AC) For the most part it will wake up from sleep just fine.
    In the last 3 nights I turned the MBP off before I went to sleep.
    When I tried to boot in the morning the machine makes the regular DVD noise but it will keep doing this noise for 3 times, the light on the front will turn on but the machine will not start. There is also no startup chime. No video. When I pressed the power button to turn it off and then on, it will do the same.
    I had been thrugh nightmare with a first generation MB so I had an idea on what to do -- I reset the PRAM and it starts fine.
    This has been happening 3 mornings in a row. (I don't have anything connected to the MB other then the AC adapter.
    I repaired permissions, went throguh the hardware test, took the battery out, checked the Apple website for firmware updates, and although there was firmware update 1.2 for MBP on 11/13, after launching it, I get a messge that tells me that my computer doesn't need the update.
    I get all kinds of weird behaviors and the MBP will become very slugish... the highlight was today while burning a DVD in Toast none of my applications will launch, every application I would click on the dock will just bounce about 20 times and then stop. I couldn't even relaunch the Finder and ended up pressing the power button to force it to shut down. mind you, It restarted fine.
    I read in one OLD thread here on the Apple forums that someone had similar problems with a MB and it was resolved by the firmware update.
    Does anyone has similar issues or have any idea why my machine will act like this? I rather try to resolve it myself before I call Apple care or go to the Apple store.
    Stats:
    Machine Name: Mac
    Machine Model: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B00
    SMC Version: 1.12f5
    thanks in advance.
    Boaz
    MacBook Pro C2D   Mac OS X (10.4.8)  

    Thanks for the response.
    Yes, I reinstalled the OS (clean install)
    The issues with starting up in the morning still consistant.
    It appears that if I shut down and restart right away, there is no issue- it's ok, but if the machne is off for awhile it will not boot on the first time.
    I left my MBP off all day and took it to the Apple store after work.
    The MBP will not reboot at first which really surprised the guy who claimed to be head technician. He kept insisting that's it's a 3rd party software issue, and I was saying, how come a 3rd party software will affect the booting of the computer? ( you can't even here the chime!)
    He suggested that I will go home and clean install OS X again, and this time not to install anything else on it. The test is on. I did a clean reinstall. The machine will be off tonight, and we'll see what will happen in the morning!
    MacBook Pro C2D   Mac OS X (10.4.8)  

  • Just upgraded to OSX mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    Just upgraded to OSX 10.9 mavericks on macbook pro mid 2011 version. Having a big issue here that whenever my mac comes back from sleep, i.e after I open the lid, the screen flickers and there is an error of Finder not opening properly. Any fix to this?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Macbook Pro C2D is beeping, scratching, and cursor is freezeing

    I am having the same problem as others with regards an irregualar faint beep coming from the left side of my MBP C2D that I just purchased. In addition, I notice my cursor freezing up for a fraction of a second from time to time. Also, there is unusual hard drive movement at times causing a scratching sound. Strange stuff, and I can't seem to get an answer from Apple as to what this is, (especially in light of all these postings regarding the same isssues). Was wondering if anyone has been able to get any kind of answer to these issues???
    Macbook Pro C2D   Mac OS X (10.4.8)   What the __ is this?

    Bump. Anyone have any ideas on this?
    I "shut it off" last night, but when I turned it on again tomorrow, it turned out it didn't quite shut down?
    It booted to the grey log-in screen, basically.
    I've also come to the realisation that my charger isn't registered (the LED isn't orange/green like it usually is), and I can't get a "battery status" (I'm sure it has another name, I just don't know what it is) when I click on the little button on the left hand side of the laptop. Usually, it would show green dots/LEDS to tell me how far along it's charged, but now I get nothing.
    I get the distinct feeling something's up with my battery, and maybe my RAM (because of the repeated triple beep after shutting down last night).

  • Macbook pro c2d LOUD

    I just bought a Macbook pro c2d and I'm ******. I replaced my whisper quiet Imac 2.0 core duo so I can have mobility and a fast mac all in one. At first I felt like I hit pay dirt! The mbp 2.33 15" model is as sleek, cool, and fast as you can want.
    Unfortunetaly for me though I'm not just looking to surf the net with a nearly $3,000 machine. I actually want to do work on it.
    When running Logic Pro and doing some processor intensive tasks my quiet laptop fans turn into jet engine turbines. So loud that I can't even think of using a microphone anywhere near this laptop. They quiet down rather quickly after whatever is taxing the cpu is done but while they are on they are LOUD.
    Does anyone else have this issue that would like to comment?
    Is it being addressed?
    Should I sell this thing?
    Inquiring minds want to know...
    mbp c2d 2.33 15"   Mac OS X (10.4.8)  
    imac duo 20"   Mac OS X (10.4.4)  

    download one of the fan control programs. You can set
    the fans to behave differently as well as observe
    what they are turning at any given point. You might
    be able to isolate one of them as being louder.
    Mine are the same noise level.
    its possible your fans are defective or something. My
    fans run usually from 3000 to 5000 revs and never
    loud enough I could not talk on skype etc.
    call applecare and see what they say
    Thanks for the advice. I downloaded smc fancontrol 1.23.
    My fans seem to be working just fine though. What I mean by fine is that they seem to be working the way Apple intended them to.
    They turn on in the 80's and cool the machine down fast. When the cpu is at idle (46) it's quiet. My fans at this point are 2000 rpm and don't bother me at all.
    I don't see how anyone can use a microphone though when they are at 6000 rpm.
    I imagine when you're using skype your computer is not being tasked that much so I don't think you'd have this problem. But, when playing back 70 plus audio tracks, recording at the same time, massive amounts of signal processors, firewire drives, firewire audio card, and so on it raises the cpu temp and I get the jet engines.
    imac duo 20"   Mac OS X (10.4.4)  
    mbp c2d 2.33 15"   Mac OS X (10.4.8)  
    mbp c2d 2.33 15"   Mac OS X (10.4.8)  

  • My macbook pro started acting strange after a safari reset. the mouse no longer: animates the dock, activates hot corners or selects pages from the 'top sites' page.

    my macbook pro started acting strange after a safari reset.
    the mouse no longer: animates the dock, activates hot corners or selects pages from safari 'top sites' (without a hassle). attempts to reset dock and hot corners from preferences has been fruitless
    the mouse also gets 'stuck' in logic precipitating force quits.
    i run osX 10.6.8 on a 2007 macbook pro that has had 2 motherboards replaced autumn 2010.
    my troubleshooting has been: restart, pRam and safe boot, also checking a 'test' account to find the same issues extant.
    pRam restart caused airport to quit and say there is no airport card, and wouldn't respond untill another reboot.
    macbook pro 15" 2.4 GHz intel core duo.2 GB 667 MHz DDR2 SDRAM.
    i have treated this book with care, yet run logic pro studio to the limit of this book's abilities.
    what shoud i do?

    You don't say which year you have, however...
    ...there are known problems with the mid-2010 models (see http://support.apple.com/kb/TS4088?viewlocale=en_US&locale=en_US) as well as early and late 15" 2011 models (see https://discussions.apple.com/thread/4766577?tstart=0).
    Apple has taken ownership of the problems with the 2010 model but, unfortunately, the free logic board replacement for that model has probably long expired for you - three years after date of purchase.
    One the 2011 models Apple has admitted no defect. You'll just have to skim the articles to get an overview of the problems that people are having (usually showing up as screen glitches at first and then going downhill from there).
    Good luck,
    Clinton

  • How Necessary is PRAM battery on MacBook Pro (c2d intel 2.13, model a1211)

    Hello Everyone, I stupidly broke the socket/clip where the pram battery attaches to the logic board on my Macbook Pro (c2d Intel 2.13). Unfortunately, since the socket/clip is a surface mount component and the way it broke (I don't see solder pads) I'm unable to re-solder the clip back on to the motherboard. Here's a picture of what I'm talking about (borrowed from someone else who apparently did the same thing): http://yfrog.com/6ximg0870nj
    My first question is if anyone knows how vital the pram battery is to a Intel Macbook? It seems that the laptop works fine without the pram battery. Is the battery only necessary to retain pram settings if the main laptop battery is removed and the power adapter disconnected?
    Second question is whether there is any alternative to repair the logic board other than get an entirely new board? The laptop is recently out of warranty (Applecare expired earlier this year) and I don't believe that Apple would have covered this since I caused the damage myself.
    Third question(s) is whether it would cause any problems to use the logic board out of a c2d 2.33 a1211 macbook pro (I can get my hands on one for a pretty reasonable price)? The only difference I can see between the two boards is the clock speed of the main processor and the amount of video ram. Would there be any advantage to using this logic board? Doesn't seem like the speed bump and video ram would do to much.
    Thanks in advance for any comments/help you can offer.

    Much obliged. So it sounds like the only time this will be an issue is if I disconnect the regular battery and the power supply at the same time. The rational thing to do here is to just live with it rather than blowing hundreds on the new logic board and risking additional damage during replacement.
    I just wish I wasn't so OCD about this. Bothers me a bit to know that something is wrong with the laptop even if it doesn't manifest itself on a day to day basis.

  • Macbook Pro C2D HD 5400rpm. How many audio tracks?

    I'm looking to move from my Ti 1Ghz G4 to a newer Macbook Pro C2D, and i've a question about using the internal HD on the MBP.
    On my old TiBook, ive popped in a 100GB 7200rpm drive, and from this i've been able to acheive around 44 to 46 stereo tracks (playback only) before i get "disk too slow errors" (the drive had around 55GB used)
    Does anyone know the max number of audio tracks that can be streamed off an internal 160GB 5400rpm in a MBP C2D?
    Anyone able to run a quick test for me please?
    Powerbook Ti 1Ghz   Mac OS X (10.4.8)   1GB ram, 100GB 7200rpm HD

    whoa he came down hard on you there...
    ok i have a macbook, not pro, didn't need the little extra u get more for a lot more money if you buy pro, not worth it to me... i run my sessions on the internal 5400rpm. keep everything in the lappy, samples and all, have her juiced up 2g's of ram and let me tell ya i haven't had any speed issues at all. i have all of logics performance tweaks set to blazing (128, live playback only) and it's comparable to my G5 tower. These Intel chips are no joke. If you have room in your go bag for the external HD take it with you cuz it'll even run sweeter. i'm seriously thinking of getting rid of the old tower and getting another lappy, but no i'll prob just get another macbook, for a grand it ain't bad at all, throw in the apple care, max out the ram and presto you've got all your gonna need from a computer-any application

  • Have 2006 MacBook Pro with wireless KB.  Some of keys (caps lock, tab) are not working.  How do I fix this?, Have 2006 MacBook Pro with wireless KB.  Some of keys (caps lock, tab) are not working.  How do I fix this?

    Have a 2006 MacBook Pro with wireless mouse and Keyboard.  Some of keys (caps lock, tab) on KB do not work any longer.  I attempted to replace wireless KB with wired KB, but could not find one that was compatible with Snowleopard (10.6.8) OS.  Would like to replace KB with either another wireless KB or wired KB. 
    However, in view of the scarcity of the above items, it appears I might serve myself better by fixing my current KB.  Any suggestions?
    Thanks!

    Hello Jimbo5451,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Have a nice day,
    Mario

  • My macbook pro is very slow after instal OSX

    My macbook pro is very slow after instal OSX

    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Try these in order:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • My macbook pro is very slow after installing mountain lion

    my macbook pro is very slow after installing mountain lion?  Is anyone else having this issue?

    If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
    one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
    If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
    the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
    You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
    There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
    You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
    Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
    Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • Why is my Macbook Pro slow to wake after sleep?

    Why is my Macbook Pro slow to wake after sleep?

    I am having the same issue. I hook it up to the charger in the evening and close the lid. When I go to use it the next time it takes a good 30 seconds or so to wake up. The screen shows the log in screen but typing doesn't work and the cursor is frozen. Sometimes it will even give the rainbow wheel for the cursor, so it seem like it is processing whatever to get going. I also notice that my battery won't be fully charged at anywhere from 95%-99% after being charged a full evening. What can I do to change whatever is happening because it is pretty crappy to charge it all night expecting to have a full battery for the next use, plus the issue of having to sit there waiting for it to boot every time.

  • Macbook pro runs really slow after sleep mode

    My MBP ( MacBook Pro (13-inch, medio 2012), 2,5 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel HD Graphics 4000 1024 MB), runs very slow after sleep mode. I notice that when I wake it up, my memory usage is nearly 8 GB. After a restart it is back no a normal level, between 2 and 5 GB depending on how many programs I am running. Any ideas what causes this? My IOS is Yosemite 10.10.2
    Kind regards

    Hi Japib
    Thanks for your reply. Here is my report:
    Problem description:
    macbook pro is really slow after sleep mode
    EtreCheck version: 2.1.8 (121)
    Report generated 4 februari 2015 20:56:34 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 172
    Video Information: ℹ️
        Intel HD Graphics 4000
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:36:41
    Disk Information: ℹ️
        APPLE HDD TOSHIBA MK5065GSXF disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (292.17 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Hotspot Shield
        [not loaded]    com.anchorfree.tun (1.0.1) [Click for support]
            /Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
        [loaded]    com.kaspersky.kext.kimul.44 (44) [Click for support]
        [loaded]    com.kaspersky.kext.mark.1.0.5 (1.0.5) [Click for support]
            /Library/Extensions
        [loaded]    com.kaspersky.kext.klif (3.0.4a41) [Click for support]
        [loaded]    com.kaspersky.nke (1.6.4a15) [Click for support]
            /System/Library/Extensions
        [loaded]    com.hzsystems.terminus.driver (4) [Click for support]
        [not loaded]    com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) [Click for support]
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
        [not loaded]    com.sony.driver.prs2 (1.0.3d1) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.3 - SDK 10.8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Launch Agents: ℹ️
        [running]    com.epson.Epson_Low_Ink_Reminder.launcher.plist [Click for support]
        [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
        [running]    com.epson.eventmanager.agent.plist [Click for support]
        [running]    com.kaspersky.kav.gui.plist [Click for support]
        [not loaded]    com.sony.ReaderDesktop.RunReaderDesktop.plist [Click for support]
        [not loaded]    com.trusteer.rapport.rapportd.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.anchorfree.ajaxserver.plist [Click for support]
        [running]    com.kaspersky.kav.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
        [loaded]    com.tunnelbear.mac.tbeard.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
        [loaded]    com.valvesoftware.steamclean.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Documenten    Map  (/Users/[redacted]/Documents)
        uTorrent    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
        BambooCore    UNKNOWN  (missing value)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 60 Check version
        WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        DuckDuckGo
        Save to Pocket
        Awesome Screenshot
        URL Advisor
        Virtual Keyboard
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Squeezebox  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 206.70 GB
        Destinations:
            My Passport [Local]
            Total size: 999.83 GB
            Total number of backups: 17
            Oldest backup: 2013-11-06 17:55:38 +0000
            Last backup: 2014-10-14 11:30:39 +0000
            Size of backup disk: Adequate
                Backup size 999.83 GB > (Disk used 206.70 GB X 3)
    Top Processes by CPU: ℹ️
            15%    mds
             5%    WindowServer
             0%    ocspd
             0%    fontd
             0%    kav
    Top Processes by Memory: ℹ️
        223 MB    kav
        198 MB    Safari
        155 MB    Mail
        137 MB    mds_stores
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        3.45 GB    Free RAM
        3.05 GB    Active RAM
        1.11 GB    Inactive RAM
        974 MB    Wired RAM
        1.64 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 4, 2015, 07:21:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EPSON Software Updater Agent_2015-02-04-192116_[redacted].crash
        Feb 4, 2015, 07:18:08 PM    Self test - passed
    Hope this will shed some light on the problem.

Maybe you are looking for

  • Problem with Dataguard Wizzard in OEM 10

    Hi, I've tried to create a physical standby database of a 10gR2 instance on the same host (windows 2003 64 bits) through OEM 10, and I get an error message at the first step. I select "create a physical standby database" and I get this in french : "I

  • Mac OS X Update Combined v. 10.5.6 wouldn't install

    I have a MacBookPro Mac OS X 10.5.4 2.5 GHz Intel Core 2 Duo and 2GB 667 Mhz DDR2 SDRAM memory, I installed the update to the Mac OS X Update Combined 10.5.6 version, it worked, I click install in the Software Update app., it tells me to restart, I c

  • Maverick 10.9.2 WD mybook / my book studio fix

    I ran into a problem this week with my desktop iMac not communicating with either of our WD desktop drives. Neither Apple support nor WD could solve this problem. A similar incident occurred when MAverick updated late last year. I went to the WD webs

  • Lead & Sales Scenerio

    Dear All, I have been given a functional scenerio in which a sales person of an organisation is able to enter the Lead which he gets in SAP in terms of value. Then he can be able to process if any of the lead has been converted into sales. So, I shou

  • Software Update crashes during check

    Yesterday I installed Security Update 2005-009 via Software Update to my 10.4.3 up-to-date system (I installed everythig software update suggested). Today daily software update check crashes: Link (dyld) error: Symbol not found: __ZN3KJS7UString7rele