Macbook Pro - Cable not found

Hello,
I try to connect my MacBook Pro (2012) via Ethernet cable and Thunderbolt adapter to a WLAN router (TP-Link WR1043) but I am getting error: cable not found. Usually I am using WLAN but as I am having trouble with the WLAN connection as well at times, I would like to use the LAN connection as temporary workaround.
The same router/cable works fine on an older version of MacBook pro (2007). Any advice?

I have seen this problem under two different scenarios. First time was when I tried to load jabber on my mac. All I got was a greenish screen. After doing some research, I discovered that the same kind of problem occurred with Skype users and it was associated with photobooth. So, I stopped photobooth and the problem went away.
The other situation was when some of our users upgraded to Maverick. So, the older version of Jabber would not work (camera would not work). So, we got a newer version of jabber for mac and the problem went away.

Similar Messages

My macbook pro can not found any network WI-FI

My mac book pro can not found any network in wifi but after turn of and turn on WI-FI for more than 10th it can found network and of course my network
interesting is when i leave my room with my labtop without any trun of or on wifi, network can detect every WI-FI!!!
any ideia ??

Hi alirezaDavid,
If you are having WiFi issues with your MacBook Pro, you may find the following article helpful:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Regards,
- Brenden

MacBook Pro camera not found/working

I am using system 10.7.5 (I have CS6 and worry that upgraded software will not work with apps I use to make a living)...and ALL my apps: Skype, Photobooth, Facetime will not work and say, no camera detected.
I have not used skype in several months, and am not sure when or what caused my camera to stop. No clue what to do. My hard drive did crash and I bought a new hard drive and used Time Machine to restore my system drive about 5 months ago.
No idea if this has anything to do with it.
Is it because of my system? This stinks.

How to Troubleshoot iSight

MacBook Pro will not boot up. Hardware test found no problems.

MacBook Pro will not boot up. Hardware test found no problems.

Sorry. What I mean is I selected the SL boot up in the start up panel and it would not boot into the cd. The CD rom sounds like it just keeps reading with it slowly loading from grey screen to blue screen to the Block screen. Almost like it is booting into normal mode from the hard drive.
What I can't understand is why it runs fine is Safe mode?
Also why do I get a " this disk cannot be used to start up your computer" message on my hard drive when trying to install Lion in safe mode? Well why not it's the only hard drive in the computer?
The first screen shot is the Tech tool showing everything passed the hardware test is safe mode.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

MacBook Pro will not detect displays. . .

I found this link, and it best discribes what is happening on my macbook. I have a thunderbolt to cdmi cord that I use on my TV. Then all of a sudden, it just stopped working. . . My screen flashes black for about a second like its about to connect to my TV, but then nothing happens. Please help. . .
I have a MacBook Pro 13 Mid-2012 running 10.10.1
Here's the link i found my macbook pro does not detect external display anymore

Just one bit of data...
I don't know what the deal is, but I had a similar situation. (It all worked fine, then I upgraded to 10.9.5 and it didn't work any more, but then I upgraded to 10.10 and then it worked. Then it wouldn't. but once in a while it would. It made no sense. ) In the end I got a different (more expensive) adapter and cable and everything works properly.

MacBook Pro will not connect to the internet

Suddenly, my MacBook Pro will not connect to the Internet--even when I take the cable from the Time Capsule and plug it into the laptop...
-Internet is good
–WiFi is connected
-both work with my iPad...

You should show WiFi:
Do you have it turned on?
Clinton

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

MacBook Pro does not go to sleep when power cord is connected

Hi Experts,
I have recently discovered that my MacBook Pro (2009) with OSX Lion does not go to sleep when the power cord is connected. It does not matter if I close the lid or select sleep from the Apple menu. All that happens is that the screen is powered off, the SIL is solid and I can hear the HDD/fan. I have not changed any of my power settings recently and it has not been a problem previously. If I disconnect the power cord the MB goes to sleep as supposed to (the SIL led starts flashing).
Doing some research I have found other users with somewhat the same issues when VMWare Fusion is installed. I have done some further testing and it seems that if I disable the virtual machine's Network Adapter and quit VMWare Fusion the MB goes into sleeping mode when the lid is closed even with the power cord connected. Enabling the Network Adapter again prevents the MB to go into sleeping mode when the power cord is connected. This even applies when the VMWare application is shutted down.
My guess is that the Network Adapter somehow prevents the MB to go into sleeping mode. The workaround is of course toggling the Network Adapter on and off but the virtual machine has to be running in order to do so. Not being that familiar with network settings on a Mac is there any other way to get around the problem?
Thanks in advance :-)

To anyone,
I have turned internet sharing off but the Ethernet box remains checked. If I uncheck the Ethernet box, the Internet Sharing bubble turns red, however when I close System Preferences and re-open, the box is automatically checked although Internet Sharing is off. Because of this my Macbook Pro will not sleep properly.
All other sharing items are turned off. Only Internet Sharing continues to automatically show Ethernet as active from a Wi-Fi connection.
Any advice?

My macbook pro is not booting, please help me :(

hello,
my macbook pro is not booting in OS X, it displays the apple logo and the spinning wheel, but a circle with a cross appears and the spinning wheel continues, please guys, help me
P.S: my MBP is boot camped

Well, sometimes you can gain access to the drive from another Mac connected to your computer via Firewire cable. It's called Target Disk Mode - Transferring files between two computers using FireWire. Or you already have backups. If you don't then you should consider a backup strategy to avoid this the next time it happens.
There are too many reasons for a drive to become corrupted within the normal course of use. A most common cause is abnormal shutdowns from power outages or not using the normal shutdown procedure because of a system lockup. Software glitches happen or you may be using software that is poorly written, and on and on.
If don't have backups:
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

I have a MacBook Pro and not able to connect to Internet. I have other HP comp and iPad and am able to connect. I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection. Any suggestions? Thanks!

Call Apple Care back & tell them their suggestion did not work.
Solution may be found if you search in the "More Like This" section over in the right column.

MacBook Pro will not install iPhoto

My new macbook pro would not let me update my iPhoto application. So, I was told to try to delete it then reinstall it. The apple tech I emailed with told me this was because I needed to download the iOS x lion software so I did and it will not let me reinstall my iPhoto back to my computer. When I try doing so, it asks for my apple ID and password, I enter it, then a message appears that says, "These apps cannot be accepted on this computer. Future updates of these apps can be found through Software Update." What do I do to get my iPhoto back!

Contact the apple tech you worked with and have him resolve the issue for you.

The sound on my Macbook Pro does not work.

The sound on my Macbook Pro does not work. When we press the volume buttons, the sound icon pops up, but the bar is full with a small "Does not work" circle below it, and nothing happens when I hit volume up or done. I went into system preferences, but there aren't any options there that I can see to change it.

"Unfortunately, it doesn't provide any help for a MacBook Pro, other than indicating to call Apple Support" (sic).
Au contraire. TS1574's title and affected products are thusly:
"Troubleshooting issues with no audio from built-in speakers on Macs
Products Affected Mac mini, MacBook, MacBook Pro, iMac"
As a result, the instructions of the article are relevant. To be sure, follow those steps, the last of which is to contact Apple.
So, by way of reminder, here are the steps to troubleshoot the audio on your MacBook Pro. There is no red light, so the port is likely fine. Headphones work, so clearly your sound card is fine.
1. Ensure an incorrect version of OS X is not installed. If one is, then reinstall or erase/install after backing up your data.
2. Remove any external audio devices from USB, firewire, etc.
3. Open Sys Prefs > Sound > Output
If Internal Speakers is listed, select it and test again.
If Digital Out is listed, confirm again that all external audio devices and cables have been removed.
If mute is selected, unselect it.
If the volume slider is low, raise the volume.
If the above simply doesn't fix it, the issue may be a corrupted plist. Apple Support might be able to help troubleshoot the issue further, per the last step of TS1574.
I hope it gets resolved for you. Good luck.

Why I can not restore the OS X Lion Montain from my MacBook Pro, will not let me online

Why I can not restore the OS X Lion Montain from my MacBook Pro, will not let me online

What is the Error?
If using Internet Recovery, do you have your WiFi set up as suggested?
Did you try using Ethernet cable?

Macbook Pro - Cable not found

Similar Messages

Maybe you are looking for