MacBook Pro - Can't connect to Airport Base Station in XP

I have a new MacBook Pro running 10.4 and Win XP using Boot Camp. I also have an Airport Extreme Base Station. The MacBook finds and can use the base station perfectly when booted to 10.4. When booted into XP, it just keeps saying that it can't see any wireless networks (none available). I've tried rebooting the base station, repairing the connection in windows - Pretty much everything I can think of, but still no joy. It's really starting to stick in my craw. If anyone has any suggestions on how to get this to work I'd appreciate the help, as having to re-boot the Mac to copy stuff across to my G5 constantly is super annoying.....
Thanks

Thank you! It's very difficult for me to even mention the "W" word without somehow belittling it. I truly loathe using that OS, but am sadly forced to since we use Access for writing up orders. Woe is me!

Similar Messages

1 Macbook Pro can not connect the Airport Disk Others OK!

Have an airport Extreme with 1 Hard drive now installed. I have two Macbooks and a MacPro that can access the sharepoint fine but I have on Macbook Pro which will not connect, it seems that Finder just waits forever for a connection.
What have I screwed up on the mac? Is there a plist or something I need to delete or reset?
Thanks

Problem solved it was the AEBS. Powered it down for 30secs then restarted seemed to solve the problem. Obviously Resetting it from the Airport Utility does not fully "Reset" it.

MacBook Pro Can't connect to App Store

Hi, All friend
Please to help me about Macbook Pro can't connect to App Store.
When i open App Store, So Message like this :
One Moment Please.
Connecting to the iTunes Store.
Loading...
I wait it for along time but can't not open it.
What can i do it?
Please to help me and give new advice to me.
Thank you so much all friend

HI ...
Try here > Can't connect to the iTunes Store

My macbook pro can not connect to my telus router

my macbook pro can not connect to my telus 2wire router

Had a similar problem with Macbook Pro3,1 on 10.5.8 - I chatted with Telus support. They remotely updated firmware on the Actiontec V1000H modem and it was resolved immediately.

My MacBook pro can not connect internet

My MacBook pro can not connect Internet

Um okay. And? What have you done to try to fix it? What error messages are you getting? Do you use WiFi or Wired connection?

HT1218 I recently updated from O.S. 10.6 to Mountain Lion and had additional memory installed. Now I can't get my wireless printer to print wirelessly. I went to Airport utilities as suggested above, but it says it can't locate any airport base station.

I just updated from OS 10.6 to Mountain Lion. My HPC4780 wireless all-in-one will not print wirelessly, even though it indicates it is getting a wireless signal. I followd the "airport base station firmware updates" suggestions, but my computer can't detect an airport base station, even though I am looking at it, and the light is green like it is supposed to be. The printer works if I connect it, but won't print wirelessly. Any ideas? I am trying to learn Mountain Lion's ins and outs.

I just updated from OS 10.6 to Mountain Lion. My HPC4780 wireless all-in-one will not print wirelessly, even though it indicates it is getting a wireless signal. I followd the "airport base station firmware updates" suggestions, but my computer can't detect an airport base station, even though I am looking at it, and the light is green like it is supposed to be. The printer works if I connect it, but won't print wirelessly. Any ideas? I am trying to learn Mountain Lion's ins and outs.

How can i use an airport base station and multiple airport expresses with U-verse and still use wireless tv boxes?

I just got uverse, and when I put my Airport Base Station in Bridge mode I lose access to the 4 airport express stations I have. Can anyone tell me how to turn off the u-verse wireless, set up a network with all the apple stations and still have wireless u-verse tv boxes work? Thanks!

Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

Can't set up Airport base stations with new MacBook Pro

i have a brand new, late-2013 15" MacBook Pro running Mavericks. my attempts, using this machine, to set up my sixth-generation, 802.11ac Airport Extreme and my brand-new, whatever-generation 802.11n Airport Express purchased yesterday at an Apple Store (that means it's the current generation, with the power cord) - these attempts all fail with Airport Utility saying it's joining the base station for about a minute and a half, after which it stops trying and says, "An unexpected error occurred. Please try again."
i can set up both of those base stations effortlessly with my iPhone.
furthermore, i seem to be able to use this MacBook Pro to set up my fifth-generation, 802.11n Airport Extreme just fine - even when it's all the way across the house and my attempts to set up the sixth-generation one, which is a foot away from my MBP, are failing.
why can i set these devices up with my iPhone and not with the newest, best, fastest, fanciest, most powerful laptop Apple makes?
thank you.

mmm...okay. thank you, Bob.
for now, i've got the base stations configured via my iPhone, and once configured, my MBP can see and use them just fine. it just irks the **** out of me that my brand-new top-of-the-line MacBook Pro can't handle this simple task, and should have to use a wired connection to set up my base stations (how archaic!). it may be the only device i have with me one day when i want to set up an Airport base station (okay, that's unlikely, but it's the principle of the thing, dammit).
are we sure this is a matter of bugs in Mavericks, and not a hardware problem with my MBP or something?
many thanks.

Macbook OSX 10.6.8 pro wont connect to airport base station anymore

all other machines have no problems. It worked earlier in the day-put to sleep-came back- now it can't something is wrong with network settings but nothing changed. Two PC's are connected to same cable/Airport base station wirelessly with no issues it's just my machine. I've rebooted a few times-that didn't help. i can get my macbook's airport to work with my wireless aircard so it's not my the internal wireless modem, it's got to be my wireless settings for the airport basestation itself-but nothing chagned in those few hours it was asleep? I have been having issues for a few weeks requiring that I run diagnosis on this home wireless network connection, but it usually gets resolved and coems back on-now it seems gone.
Does anyone have any suggestions? I am not sure if it helps but it looks, when I renew the DHP, nothing is in the router section.
(not that technically savvy-but usually can wing it if the directions are too bad).
This is running OSX 10.6.8
Thanks,
Megan

Your System Preferences > Network > TCP/IP should be set as follows
IPv4 - DHCP
IPv6 - off (for now, you might have to enable it in the future, but it can be off for now)
There is nothing in the DHCP Client ID box as it's not required.
If your clicking the "renew lease" likely means your date and time on the computer is wrong.
Go to System Preferences > Date and Time and set a time zone and in the first screen, set the date and time automatically. then reboot the computer.
If your having problems with your computer remembering the date and time,
perform a PRAM reset
http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
If your still having problems with your machine holding the date and time, not keep ing your System Preferences changes after a reboot, then open your
Users/Library/Preferences folder and look for a file called
com.apple.systempreferences.plist
and move it to the Desktop, reboot the computer and try to set the date and time again, reboot to see if it works remmebering your system preferneces changes, if it does, then delete the desktop file.
If your still having trouble after that, create a new user account and log into it, see if the problem still continues.

Airport utility can't find my airport base station

Im trying to set up a wireless internet at home. I have a comcast cable internet connected to motorola sb120 cable modem and I connected an ethernet cable from the modem to my aiport base station. when I open the airport utility in my macbook (also from my iphone 4s) the airport utility can't find the base station. the base station has a solid green ligh on and the modem "llink" light is binking amber. If I connect the ethernet cable frm the modem to my macbook I can get the internet with out any problem ...please help me set up my wireless internet with airport base station. ty.

Suggest that you try the following:
1) Reset the cable modem. There is a reset button on the back or bottom of the device. Check your documentation for the modem for exact details. In general, you press the reset button for a few seconds and then power down the modem completely.
That means pulling the power plug from the back of the modem or the AC wall plug
Leave the modem powered off at least 30 minutes
2) Perform a Factory Default Reset on the AirPort Extreme using the instructions in this document
Resetting an AirPort Base Station or Time Capsule FAQ
3) Then power off the AirPort Extreme
After 30 minutes.....
4) Connect the Ethernet cable from the cable modem to the WAN port (circle icon) on the AirPort Extreme
5) Temporarily, connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme
7) Power up the modem and let it run for 5 minutes by itself
8) Power up the AirPort Extreme the same way
At this point, the AirPort Extreme should be slowly blinking amber
9) Open AirPort Utility (I assume that you have AirPort Utility 6.0) and click on Other Base Stations, then click on the Base Station xxxxxxx representing your AirPort Extreme to start the setup process
AirPort Utility should suggest that you configure the AirPort Extreme to "Create a wireless network". Accept that option and enter the required wireless network name that you want and passwords
Follow any more prompts as required and AirPort Utility should configure the device for you
Wait 25-30 seconds for a green light
10) Disconnect the temporary Ethernet cable from your Mac to the AirPort Extreme
11) Log on to the wireless network that you named during the setup process
12) Report on your results

Can't connect to my Base station

Hi all,
I have changed some settings in the Admin Utility (I have an AirPort Base station), and now my computer can't connect to it. Although I did a factory reset, It sometimes shows an AirPort id as the station's name, and sometimes a custom name the station had when I bought it.
Now I can't change any settings since I get the 4 error message every time I try to connect to the station. I tried this on 2 pc's.
Any ideas?
Thanks

Hi!
I followed these instructions:
http://www.windowsreference.com/networking/windows-vista-fails-to-obtain-ip-addr ess-from-dhcp-serverrouter/
And rebooted and get connected. But somehow I can't hear music from stero's speekers.. well at least one problem solved..

My airport utility can't find my airport base station

My AirPort Express stopped working! It keeps flashing the amber status light. I tried finding the problem with airport utility but airport utility can no longer find my airport base station. I did a hard reset but I am not sure what to do now.????

Suggest that you try the following:
1) Reset the cable modem. There is a reset button on the back or bottom of the device. Check your documentation for the modem for exact details. In general, you press the reset button for a few seconds and then power down the modem completely.
That means pulling the power plug from the back of the modem or the AC wall plug
Leave the modem powered off at least 30 minutes
2) Perform a Factory Default Reset on the AirPort Extreme using the instructions in this document
Resetting an AirPort Base Station or Time Capsule FAQ
3) Then power off the AirPort Extreme
After 30 minutes.....
4) Connect the Ethernet cable from the cable modem to the WAN port (circle icon) on the AirPort Extreme
5) Temporarily, connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Extreme
7) Power up the modem and let it run for 5 minutes by itself
8) Power up the AirPort Extreme the same way
At this point, the AirPort Extreme should be slowly blinking amber
9) Open AirPort Utility (I assume that you have AirPort Utility 6.0) and click on Other Base Stations, then click on the Base Station xxxxxxx representing your AirPort Extreme to start the setup process
AirPort Utility should suggest that you configure the AirPort Extreme to "Create a wireless network". Accept that option and enter the required wireless network name that you want and passwords
Follow any more prompts as required and AirPort Utility should configure the device for you
Wait 25-30 seconds for a green light
10) Disconnect the temporary Ethernet cable from your Mac to the AirPort Extreme
11) Log on to the wireless network that you named during the setup process
12) Report on your results

MacBook Pro can't connect to wireless internet

I have a MacBook Pro that I have had from about 3 years now. It's been great but earlier this week, it wasn't able to connect to the internet here at my school (college). I didn't think too much of it because my schools internet is always spotty and goes down from time to time. Yet when I go on to my computer tonight nothing I do with my airport or computer will get my webpages to say anything other than "Server not found". I tried turning off my airport then back on and reselecting my network because usually that helps. It would say it connected and I would have full bars but still the same error message. I tried again, and when I did it this time, I did it from within the system/network preferences. When I did this, I watched the connection of my airport go red, then I would connect and it would go to yellow saying I had no IP address. I would then sit and wait and eventually it would fully connect giving me the green go-a-head. But, again when I would open up my internet, I would get the "Sever not found" message. I would then quit my firefox all together and tried again that way and still same massage. I restarted my computer and tried again...nothing. I became more concerned because my roommate could get on the internet just fine and I could use the wireless in my room through my phone. I was consered that now this was a matter with my computer and not just the internet, so to make sure I got out my ethernet cable and hooked it up with my connection in my room. This would work!
So my question is...
My roommate brought up the possiblity that this problem is with some sort of chip in my computer that helps me connect wirelessly to the internet and that it has gone bad and needs to be replaced. It this so? or is there something else I need to be doing? (and I have been trying lots of thing) This is vital to me getting my work done because we are in the middle of the semester and I need my wireless!!
Please help!
Thanks!

thats... odd
thats a real world IP address. So that means you dont have an actual router doing NAT.
It's also very unsecure. I HIGHLY advise tweaking your home network very soon. Without alot more info theres not much that I can really advise though.
You said your roommate can get on the wireless fine - what IP address does he/she get?
Also, i think you said if you plug in with a physical wire it works as well - what IP address there?
Do you know if you have an actual router? Or is this simply a cable or dsl modem?

Macbook Pro won't connect to Airport Express, period.

So I just got this brand new Airport Express a couple of days ago, and I've had the darndest time trying to get this thing to work with my cable modem. I've conducted a number of experiments, and have performed factory resets on the airport more times than I care to talk about, but so far nothing has worked. Here is what I've gathered so far:
1) No matter what, whenever I try to connect to the Airport Express' wireless network, I get a connection timeout or some other error. This happens whether I attempt connecting via the Airport Utility, or manually using the airport icon in the toolbar.
2) As a result of #1, it's completely impossible to configure my airport express wirelessly, because when the Airport Utility tries to connect it just ends up giving me an error.
3) As such, I have tried configuring the airport express by hooking it up to my computer via ethernet cable. Once I do that, I am able to configure to my heart's delight, but then when I plug the Airport back into my cable modem, I am once again no longer able to connect wirelessly because of connection timeouts.
4) My connection timeout issues happen whether the Airport's light is solid amber, flashing amber, or solid green. They would probably still happen if the light was fuchsia or cerulean. As far as I can tell, the status light makes no difference whatsoever.
5) I have the most up-to-date firmware on my airport express.
6) I have the most up-to-date version of the Airport Utility.
7) I have run an ethernet cable directly to my laptop from my cable modem and the internet works fine, so the problem is not coming from my ISP.
8) My laptop (15" Macbook Pro running OSX 10.5.8) is able to connect and maintain connections to other wireless networks without any problems.
I'm at a loss. All I want is wireless internet. It can't be that hard, right?
Help!
Thanks in advance.

I had a similarly perplexing experience today. My AE - which I have been using trouble free for months - was blinking amber this morning after a particularly heavy download session. Usually a modem restart fixes the problem...but not this time.
After many many resets I was completely unable to connect to the modem wirelessly. I was able to connect when connected to the AE over ethernet. However after applying settings to the AE I was unable to connect wirelessly or over ethernet.
Setting the AE to use 802.11n (a compatible) did not immediately fix the problem, but I've no doubt that I would still be without luck if I hadn't applied that setting. However after removing all previously stored Preferred Networks, shutting down the computer and modem and then connecting the AE to modem and restarting everything I got green lights on the AE.
My computer still could not "see" the AE using the Airport Utility. The network did appear in my network list tho, so I selected it and was able to finally join the network. Only after joining the network did Airport Utility pick up the AE.
That's almost 3 hours of my Saturday afternoon wasted, but I'm just glad to have wireless internet again.
The key here appears to be configuring the AE while connected via ethernet and then trying out the various settings while it's connected to the modem.
It ***** trying to debug internet-related problems because you clearly need the internet to debug them! (ed: wow, suck* is a banned word!)
Message was edited by: kjvarga
Message was edited by: kjvarga

New MacBook Pro can't connect to D-link router

Hi everyone! I just upgraded from an early 2007 MacBook Pro to the latest 15" MacBook Pro with Core i7 chip. Did a full migration with the Migration Assistant. Everything went fine. Could connect effortlessly with my Airport Extreme Base Station at home. However at work, I use a D-link wireless router. And somehow, the computer refuses to connect to it!! I see my office network on the list when I click on the Airport icon in the menu bar but when I attempt to connect to it, I get a connection time out error. The office network is also in my Network pref pane under "Preferred Networks". But somehow, the computer refuses to connect to it. I've already tried turning the Airport off and on again. Re-starting the computer. Re-starting the router. Nothing works.
My old MacBook Pro was fine with the D-link router but this new computer seems to be rather cranky.
Does anyone have any ideas?

Strange thing happened. Today the D-link router suddenly decided to work with my MacBook Pro!! I did not do anything or make any changes to any settings. Multiple re-starts yesterday failed to yield any results. And yet today it is working!! I have absolutely no idea why.
Perhaps the hardware is "shy" and needs multiple "introductions" before it wants to come out and play. Your guess is as good as mine. Anyway, as long as it works and stays working, I'm happy!

MacBook Pro - Can't connect to Airport Base Station in XP

Similar Messages

Maybe you are looking for