Macbook Pro/Canon help

Hello i have a Canon Powershot Pro 1. I know its outdated but its what i love is there anyway i can get it to work on iphoto?

Since you are running 10.5.8, you'll need a 10.5.8 Intel compatible Compact Flash I or II reader that connects via USB.   If you have a MacBook Pro pre-June 8, 2009, or a 17" MacBook Pro, you can also use Express/34 Compact Flash adapters from http://www.macsales.com/  Connecting via USB directly eats away at battery, and has much less compatibility for many cameras than just using a media card reader for the media.

Similar Messages

  • My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    My external hard disk not working properly in my macbook pro . anyone help me . its seagate  hard disk

    You need to get some software that allows your Mac to read and write to the NTFS disk.  There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free.  I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac.  You don't need NTFS anymore, unless you still have a Windows computer that needs it.

  • Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro?  The firewire end is too big to fit in the MacBook Pro laptop help.

    Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro?  The firewire end is too big to fit in the MacBook Pro laptop help.

    After identifying the exact connectors you need, check the Apple Store online and/or eBay...you should be able to buy a cable with the correct connector on each end, rather than fooling with an adapter.

  • I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help needed.

    I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.

    I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
    OSX 10.10.3
    Best.

  • Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

  • HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

    i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Upgraded to 10.8.3 and now having start up problems on MacBook Pro.  Help?

    Please elaborate. What do you mean by "start up problems" ? How far does it get?
    Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what?

  • I do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

    i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out

    I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
    i already tried to fix permits and press weird combos of buttons on restarting. not working.
    please help

  • I cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    i cant connect my new wimax usb stick bm328 on my macbook pro. please help me

    The Hardware Test detected a RAM problem.  Take out the chips and make certain that the connections are clean and reinstall them.  Make certain that they are well seated. 
    If the problem occurs again, test with one chip at a time.  Also swap bays if necessary.
    Please indicate if you have installed new RAM and if so what brand and the specifications.
    Ciao.
    Message was edited by: OGELTHORPE

  • The iPhone "Nanou" cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.30 GB required). I have been receiving this msg every time i wanna back up my iPhone 5 to my macbook pro. plz help

    The iPhone “Nanou” cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.30 GB required). I have been receiving this msg every time i wanna back up my iPhone 5 to my macbook pro. plz help

    I'd like an answer to this one too. I need to backup my iphone5 and am getting the same message. My old laptop is pretty full. Isn't there a way to choose an external hard drive to back up to? If there is, I don't see it.

  • I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    I am running Lion on both my Macbook Pro and iMac.  Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro.  Help please.

    Check for updates by running MS Office Update directly from:
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    (Open Finder, ⇧⌘G, paste in the above and click)

  • I can't remember my password to log into my macbook pro. Help?

    I can't remember my password to log into my macbook pro. Help?

    First, make sure caps lock is not on.
    You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
    If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
    Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window opens.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select
     ▹ Restart
    from the menu bar.
    You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
    *Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
    If you forget the password and FileVault is on

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Why Family Share not show up on my MacBook Pro? Help

    I am supposed to be part of a Family Share account. I can access Family Share & other family member's purchases on my iPad but NOT on my MacBook Pro that is running Maverick OS. I log into iTunes, click on the drop down window at the top where my name is located but when the window drops down Family Share is not an option nor am I able to see the names of the other family members in the group. I have tried going to "System Preferences" to "iCloud" and then try to look for "Manage Family" but it is not there. Even if I then if after getting to "iCloud" & logging into "Account Details" there is not anything about "Manage Family" or "Family Share"
    Can you not participate with Family Share using Maverick OS?
    I would REALLY appreciate assistance with this issue.

    Hi susieqk,
    Welcome to the Support Communities!  The reason you are not seeing the Family Sharing account on your MacBook Pro is because Family Sharing requires OS X Yosemite on your computer.
    Apple - iCloud - Family Sharing
    System requirements for iCloud - Apple Support
    http://support.apple.com/en-us/HT4759
    Family Sharing
    iOS 8
    OS X Yosemite
    iTunes 12
    iCloud for Windows 4.0
    iTunes 12
    Apple TV software 7
    Here is some general information about OS X Yosemite should you choose the free upgrade.
    OS X Yosemite - What's New
    http://help.apple.com/osx-yosemite/whats-new/from-mavericks/#/dar08446b32f
    OS X - Upgrade to Yosemite - Apple Support
    https://www.apple.com/support/osx/upgrade/
    Cheers,
    Judy

  • Slow Macbook Pro- please help, I don't understand previous advice.

    Hello all,
    I have a very slow Macbook Pro running on Lion 10.7.3.
    I looked up this problem on the forums before I sent this message but I didn't quite understand the advice. I have been on something called Disk Utility and Activity Monitor but don't really understand what I'm looking for. It seems a large percentage of my mac is 'idle' if that makes sense. Someone said to look at Page Out but I really don't understand what that means and what sort of numbers are normal.
    I do have some storage left so I don't think it could be that. A lot of my gigabytes seem to be taken up by movies and 'other'. I've tried deleted a load of videos but it hardly made a difference. I have Mac Mail and it seems very slow on my Macbook compared to on my Ipad and iphone. iCal is also very slow on here and it always takes a while to load internet pages. It isnt the wifi connection.
    Please help and bear in mind I am by no means a Mac whizz so you might have to talk in layman's terms!
    Thanks,
    Amy

    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
    If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

Maybe you are looking for

  • How can I restore the count of songs during shuffle play

    The old iPod app showed a countdown of songs during shuffle play: '1 of 30'.  This feature seems to have disappeared in ios5.  Is there any way to restore it?  It was an extremely useful feature and I really miss it.

  • Oracle Workshop II LVC  for OCP Certification Price

    Hi all , here is a serious question that Customer Service from France,UK or the US can not answer me , I call them all but no answers!!!!. It's been a year since I got my Oracle OCA certification. thinking about getting the OCP; I looked at the requi

  • Idoc generation error

    Hi guys Mine is a Idoc to File scenario. I am using ARTMAS Idoc. When I go to trigger the Idoc from WE19, using the Idoc number obtained from SXMB_MONI, I am able to get the idoc. However, when I go to BD10 and enter a range for the articles, only th

  • Help - How to Remove X on the Dialog Title Bar

    I have been trying for a while to remove the X(Close) on the Jdialog title bar. Is this possible? Is there an alternative? I have a progress bar in the JDialog and don't want to user to X out.... appeciate the help.

  • Column as Variable

    Hello there, I have a procedure with a variable 'ctr' that can contain the values 'UK', 'GE', 'FR' ... In the procedure there is an SELECT-INTO-Statement: SELECT ctr INTO newVal FROM rfar WHERE val = 1; Is it posible to use the variable as column ...