Macbook Pro Cant load webpages HEEEEEEELP!

I have basically zero computer knowledge, so this problem is putting me on the edge of slaughtering my family.
I have a macbook Pro OS X and Im having some trouble with Safari. Im wirelessly connected to the internet and pages just arent loading. The white bar at the top of the page, showing the web address, only loads about 10% then will take about 15min to load the rest, or wont load at all. Everynow and then, it will work the internet will load pages normally, then about 20 seconds later, it will stop working again.
Cheers for your asnwers,
Tom

Hi...
When that happens, Apple suggests using a different DNS.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
Try OpenDNS. Only takes a minute to setup.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
Then launch Safari. From the Safari menu bar click Safari > Empty Cache
Now see if web pages will load for you.
Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, and it's free.

Similar Messages

Macbook Pro cant load web pages

I have a macbook pro that I purchased in 2010, it is the Mac OS X 10.6.8. Just recently Safari has been having issues with loading webpages. Some pages it loads fine and others it will not load at all or take forever to load. I have been on here looking for resolutions and have tried several things but nothing has worked. I believe it is an issue with my router as when I wire in straight to the modem it works fine. All my other devices work fine on the wifi, it is just my macbook pro that is having the issue. I think it has to do with the DNS but nothing i have tried on here has worked. Any suggestions?
P.S.- my router is a Cisco E2500

Go into your ~library/preferences and move this file to the trash com.appl.Safri.plist then restart your MacBook then give it a try.
To get to your library folder you will need to be in the finder, then hold down your option key then click the go menu, you will see the library.

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however i

I have been using a Lightroom 5 including recent upgrades on my Mac Pro laptop for the past 1 year. This was purchased as an upgrade from Lightroom 4 for which I have a serial number. Today I purchased a new Macbook pro and loaded my Lightroom 5 however it is asking for my serial number which I have misplaced. I am unable to trace my serial number anywhere. I have even checked my adobe membership to locate my serial number but it does not seem to have any record which is strange as I have been using this software for over a year now and the previous versions since 2009. Could someone help me in my predicament.

Contavct Adobe support thru chat:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password 9which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

i just bought a new Macbook Pro and loaded all my info from My old Macbook...now i can't remember for the life of me my Admin Password (which i created 3 years ago)...is there ANY WAY to bypass this on my new Macbook Pro and begin again...?

I assume that you don't have the installation discs, so:
1. Reboot
2. Hold command + s key down after you hear the chime.
3. When you get a text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. You will go through the setup process again, create a new admin account, login to it and then change your existing account password or whatever else you need to do. You can delete the account you made in this process, or not.

HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

Hi all
I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
I have tried the command/option-PR reset combo with no luck.
Any ideas?
thanks,
-graham
PS the specific error i got from iDVD was: The error #-2147352539 was reported…
Message was edited by: Graham - Sonos

Latest apple software update on Mac --cant view Microsoft exchange connected email on macbook pro. Loads but not viewable. Works fine on iPhone

Updated the lastest apple software to my macbook pro and now I can no longer read my emails from my microsoft exchange email. The email arrives in my inbox and you can open it -- but when you try and read the content -- it says loading..... but never loads. It worked fine this weekend -- but after I udpate the last apple software update it stopped working. I can read the emails fine on my iphone (same email account) but not on my macbook pro.
I called Apple and they could not figure out a solution to the problem -- is anyone else having this trouble?

Concisely:
https://discussions.apple.com/community/iphone
https://discussions.apple.com/community/ipad
Try posting there.

MacBook Pro Repeatedly Loads Purple & Teal Stripe, Gray, Light Blue, Bright Blue and Bright Blue Stripe Screens Instead of OS after Optical Drive Replacement by Apple (PICTURES INCLUDED)

17 inch March 26-29 (order date – shipping date) 2011 MacBook Pro, 256GB Solid State Drive, 2.3 GHz Quad-core Intel Core i7, 1 processer, 4 Cores, 256 KB L2 Cache per core, 8 MB L3 Cache, 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB), AMD Radeon HD 6750M Video Card, Intel HD Graphics 3000 with 512 MB total of VRAM. 110 GBs of free/unused disk space remaining.
Full Specs are in subsequent post.
The issues described in the title continue even after I’ve reinstalled the operating system twice (Snow Leopard) and installed Mavericks (which is working fine and even faster). I’ve tried many commands to repair this.
If anyone has experienced any of the symptoms above or below, your advice and response will be much appreciated as well as marked. These are the details:
My Early 2011 MacBook Pro has had the typical blue screens, screen freezes and graphics issues since I bought it about three years ago but nothing like this and NEVER any load issues until about a month ago. That was when my superdrive replacement was put in.
Since then my MacBook Pro will go into hard freezes or kernel panics. Then I’ll have to power it down manually and power it up manually. It’ll then refuse to load the OS until after multiple tries. It started out just 2 or 3, then 4 or 5, then 6-12, then 20. Now it takes over 30 boots to load the OS. These boot issues also occur even if it doesn’t freeze, i.e.: when I shut it down or restart it naturally (via the Apple menu, etc.).
95% of the time it’ll load to a gray screen instead of the OS. 4% of the time it’ll load to a light blue screen. Then there are the others: the first time this happened it loaded to the striped purple and teal screen shown in the picture. This happened the next four times then intermittently for about 5 or so more times.
It also loaded gray flickering screens. Flickering screens also occurred right before it froze and had to be manually powered down and up. Then it began to load regular gray and light blue screens and all flickering screens stopped. And then bright blue screens a couple times intermittently for a few days, sometimes with lines. Sometimes it’ll load to a blank/black screen as well. I’d reset the NVRAM and SMC but it still continued, happening multiple times a day, each time taking more and more hard shut downs and hard power ons to finally load the OS.
Until I installed Mavericks, every time it finally loaded the OS Finder began indexing. After Mavericks this has occurred 95% of the time.
After talking to Apple Support they had me do a NVRAM and SMC reset again over the phone. The MacBook Pro refused to load the entire time we were on the phone. After the call it got worse. It froze over 6 times that day and at worse took over 30 boots to load the OS.
I finally had time to deal with it the next day when it froze again. After over 25 boots it loaded and I put in the Snow Leopard OS dvd and ran Disk Utility. I verified the hard drive and it said it was fine. Repaired the disk anyway and it gave this message at the end:
“Updating boot support partitions for volume required”.
Next I tried to start in safe mode and it just hung up for hours. Then started up in single mode and it loaded the OS. It then loaded normally for three times in a row. I reinstalled Snow Leopard. Everything loaded normally. I waited an hour or so and then I downloaded Mavericks. 5 or so hours later Mavericks was installed. Everything hardware wise was fine for a day and all software issues were easily fixable incompatibilities. My Mac was even faster with Mavericks. However, Photoshop did give a perhaps relevant message:
“Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer’s website for the latest software.
GPU enhancements can be enabled in the Performance panel of Preferences.”
(I have OpenGL enabled in Photoshop and it was already checked when this error occurred).
Two days ago I went to Disk Utility to repair permissions while logged in to a non-admin account. Verified and repaired the disk, then verified permissions. Everything fine. After repairing permissions however, it gave a weird error box:
"Unapproved caller, SecurityAgent may only be invoked by Apple software".
The box stayed “stuck” in the Disk Utility window. My MacBook Pro then failed to do anything. I manually powered it down and up. It loaded to a gray screen with the error message box again: "Unapproved caller, SecurityAgent may only be invoked by Apple software".
It then refused to load anything else but this message box on a gray screen even after rebooting it multiple times in safe, verbose and single modes and after resetting the NVRAM and SMC. I went online with an iPad and entered in the error and got some advice. I tried to run fsck and erase the /var/folders/ via single user mode but it still loaded to a gray screen with the error message. I just decided to skip to the end and Cmd-R loaded into recovery mode and reinstalled Mavericks again. That worked: the message has not appeared since.
Some people have said this error is related to a hard drive cable failure. I know that this cable was tampered with during the optical drive replacement procedures because I watched them do it.
Everything was fine for a day. Then yesterday my MacBook Pro froze while trying to open a VLC file. It took 12 boots to load the OS. I tried single mode once and verbose mode once. 10 times it loaded to gray screens, even in those mode. A Safe boot lead to a bright blue screen. Finally reset the SMC and it loaded on the 12th time.
Just five hours ago the same thing happened except it took over 30 boots to load the OS. Single, verbose and normal boots, NVRAM and SMC resets lead to gray screens. Safe boots lead to bright blue screens with and without lines (see pictures). Finally loaded on a normal boot.
I know I should have tried safe booting, verbose, single and recovery modes, disk utility, fsck and other command methods earlier this month but in the end, these methods have not solved the problem anymore than resetting the NVRAM or SMC.
There seems to be conclusive evidence that it’s a hardware problem, stemming from last month, the FIRST AND ONLY time my MacBook Pro was opened up. Maybe it’s the hard drive cable, but it could also be the graphics card and/or logic board (something that’s always been defective on this MacBook Pro, in my opinion). Many early 2011 MacBook Pro owners have given evidence to the latter possibility online.
The first time it started it seemed to stem from me using iPhoto and Photoshop a lot. I had both running continuously for about two weeks. This is another reason for suspecting the graphics card/logic board is at fault (in addition to three years of screen/graphics glitches). And since the card is soldered to the board and the board connected to the cable...I also have serious battery draining issues, something else that got bad after the Apple Superdrive repair. And the battery is connected to the board...
Also, since downloading Mavericks, windows from every app get blurry/fuzzy when I scroll or zoom in. I have read that this is happening to a lot of folks though for various reasons.
I guess it could always be the hard drive. I just don’t know. I’m taking it in to Apple, but can't right away because it’s not local. I know they’ll be able to run a test on the hard drive. I wanted to see if anyone else has had this problem (especially the purple and teal striped screen) before they start poking around, possibly creating another problem that goes beyond my Apple Care Plan allotment.

SPECS OF MY MACBOOK PRO:
Model Name: March 26-29 2011 MacBook Pro (order date – shipping date)
Model Identifier: MacBookPro8,3
Processor Name: Quad-core Intel Core i7
Processor Speed:    2.3 GHz
Number of Processors:    1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB Memory (8GB 1333MHZ DDR3 SDRAM - 2X4GB)
HARD DRIVE: 256GB Solid State Drive
DISPLAY: MBP 17" HR Antiglare WS Display
AMD Radeon HD 6750M:
Chipset Model: AMD Radeon HD 6750M
Type:    GPU
Bus: PCIe
PCIe Lane Width:    x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-573
gMux Version: 1.9.24
EFI Driver Version: 01.00.573
Intel HD Graphics 3000:
Chipset Model: Intel HD Graphics 3000
Type:    GPU
Bus: Built-In
VRAM (Total): 512 MB
Vendor: Intel (0x8086)
Device ID: 0x0126
Revision ID: 0x0009
gMux Version: 1.9.24
Displays
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Battery Information:
Model Information:
Serial Number:    C01111403GLDGKMAE
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code:    0000
PCB Lot Code: 0000
Firmware Version: 0406
Hardware Revision: 0001
Cell Revision:    1102
Charge Information:
Charge Remaining (mAh): 4583
Fully Charged:    No
Charging: Yes
Full Charge Capacity (mAh): 7765
Health Information:
Cycle Count: 276
Condition: Normal
Battery Installed: Yes
Amperage (mA):    -4487
Voltage (mV): 11306
System Power Settings:
AC Power:
System Sleep Timer (Minutes):    15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes):    15
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes):    15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes):    5
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: No
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed:    No
AC Charger Information:
Connected: Yes
ID:    0x0100
Wattage (W): 85
Revision: 0x0000
Family: 0x0085
Serial Number:    0x007ad8c5
Charging: Yes
Current operating system: 10.9.3 (Mavericks) ; Installed on 6/21/14
Previous operating system: 10.6.8 (Snow Leopard); Installed 4/4/11
        Reinstalled multiple times. Last reinstall: 6/21/14

Snow leopard 10.6.8 wifi connected, cant load webpages

hi!
just yesterday my computer showed this problem with the internet. as the title says, it is connected to the wifi network (as it has always been) but i face the following problems:
i cant load new webpaged in google chrome and firefox (which are the ones that I actually use)
i can load webpsged that were already saved as bookmarks.
i can load webpages in safari
my icon for dropbox shows a red cross icon
utorrent works just fine
outlook (the software) get's my new emails
what i tried to solve it:
checked that my wifi networks work perfectly fine with other devices in the house
restart computer
changed DNS to one that was suggested in another thread in this discussions site
resetting NVRAM/PRAM
checked that it is updated
so, i read that some people had similar problems with the new 10.8.2 for mountain lion, or sth like that... but in my case i have snow leopard so i don't think thst's the problem

Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Macbook pro cant boot from external dvd device please help !!!!

hello everyone please help me i have macbook pro 2011 core i5 version
i just installed 2.5 ssd as second hdd
i cant boot from external dvd device to install any os the external dvd keeps on spining and mac is just thinking it doesnt show press any key to install
it shows the device when a boot into mac parition
i am trying to install windows on origianl 500 gb hdd and linux on ssd
but not luck
the external dvd drive works i pluged into my pc and it works
please help thansk in advance
200 gb mac
300 gb windows
120 ssd linux

I do not know about Disk Warrior but if you have a compatible OSX on an external HDD you certainly can boot the MBP. Use startup manager:
https://support.apple.com/en-us/ht1310
Ciao.

Macbook Pro gray loading screen, only windows partition boots

I have a macbook pro mid 2010 running Mavericks 10.9.1. Upon start up I get the gray screen with the loading bar/circle. I tried to start it using safe mode but it says there are directories, and files missing. I can only boot up in the windows 7 partition of the hard drive. I can access the Macintosh HD files through the windows partition but I can't boot up into the hard drive. When I start it using recovery mode, disk utility displays the Macintosh HD as unmounted and I can't mount it. Running disk verification says there is an error and to try disk repair. Disk repair says there is an error and to restore the disk and reinstall OSX. I have everything backed up but I can't seem to restore the Macintosh HD and can't re-partion the hard drive into one partition.
I don't think it is a hardware error since I can access the Macintosh HD files and directories, but don't know what else to try.
Thanks in advance for any help.

Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Web browsers on macbook pro only loading certain websites, why? all others say "no data received"

For the past day or two only certain websites will load on my 2011 macbook pro (facebook, google, apple on Google Chrome and just Facebook on Safari), but none others that I've found. Also all links on these sites that take you to another site result in the "no data received" message in google chrome. PC's on my homes interenet connection working just fine without these errors. Why am I getting selective internet ability? Please help, thank you.

For the past day or two only certain websites will load on my 2011 macbook pro (facebook, google, apple on Google Chrome and just Facebook on Safari), but none others that I've found. Also all links on these sites that take you to another site result in the "no data received" message in google chrome. PC's on my homes interenet connection working just fine without these errors. Why am I getting selective internet ability? Please help, thank you.

Macbook pro wont load pdfs

My macbook pro won't load pdfs downloaded from the internet. I click on something via the internet and it just goes to a blank page. Any ideas what is going on? Thanks!

There isn't that option?

IDVD wont open on Macbook Pro. 'loading themes' bar only.

Everytime i try to open iDVD, i select 'start new project' and the 'loading themes' bar appears and nothing else happens. I have never been able to get into the actual program properly.
When i was installing all the new updates when i first receieved my macbook, the computer crashed half way through so this might have caused the problem?
Either way, I trashed the program and then reinstalled i DVD from the original install disk and opened it (6.0.0) and i had the same problem. I then downloaded the software update (6.0.1) and again no difference...the rest of the iLife apps work perfectly.
please help! thanks
Macbook Pro 2ghz, 2gb ram Mac OS X (10.4.5)

no..still no difference after deleting those files. loading themes bar still wont go away! im going to do a system restart anyway and wipe off the hard drive because i copied all the files from my old 12 inch powerbook originally and i think the computer is clogged up and it def could be a lot faster. hopefully iDvd will work after that, too!

Logic 8 on Macbook Pro - fully loaded with 4 Gig rams - how does it run?

Wondering what people's experiences using Logic 8 on a Macbook Pro are. I haven't bought one yet and deciding between the laptop and the Mac Pro tower. I play to only be recording one instrument at a time, primarily guitar and bass. Then using a lot of virtual synths for the other insutrements.
Is a fully loaded Macbook Pro sufficient for several tracks of virtual synths and effects (reverb etc.) for mixing etc?
Any experiences would be very helpful prior to my purchase. I'd love to get the laptop but want to make sure it'll be sufficient for my needs.

JKavalier wrote:
Is a fully loaded Macbook Pro sufficient for several tracks of virtual synths and effects (reverb etc.) for mixing etc?
Should be fine - I can do much more than that on my 2.0Ghz Macbook with 2G of RAM.

Macbook Pro Cant load webpages HEEEEEEELP!

Similar Messages

Maybe you are looking for