Macbook Pro Case, Display and Fan

Hello,
I have a Macbook Pro now about 5 months.
Step by step i get some problems.
1.) On the left side of the case, were normally my left hand is, i get some kind of "corrosion?"
2.) My left fan make very strange crackling noise, it seems to die soon (its not the usual whining, there are really strange and loud noises (like nut cracking)).
3.) My display supsension is not very stable . That means, while input of text, the display bounces.
4.) The Macbook Pro gets unbelievable hot. Especially left from touchpad, above keyboard and near the display on the left side.
5.) The akkumulator gets very hot too.
These things are a little bit to much to accept.
What can i do? I bought my Macbook Pro in Germany, but living now in moscow. Can i arrange a change here?
Thank you very much
Mac Book Pro   Mac OS X (10.4.6)  

Hi there,
the warranty is world-wide, you can take it in to an Apple centre in moscow and they will repair it for you
Danny

Similar Messages

  • I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    I am trying to install an update for my macbook pro retina display and my mac wont restart because it says my mail is still open but when i try and open my mail, it wont let me. I think it crashed. Help?

    Go to: Apple > Force Quit
    and select Mail > Force Ouit.

  • Using MacBook Pro as display and keyboard

    Morning.
    I have an Mac mini Server 2,53 10.6.4 without display and without keyboard. How can I use my MacBook Pro as display and keyboard to configure the server?

    If you are setting up a server you can use Server Admin tools to set up a new server remotely. You would need to install the Server Admin tools on your MacBook Pro and then do the remote install procedure.
    You need to collect the serial number and the Mac Address of the Mac Mini Server to enter in as the information in the Remote Install during the installation process you will be prompted to chose Remote Management and SSH for options that way you will be able to connect to the Server Remotely at anytime when configuring or afterwards.

  • HT201364 i can't download os x mavericks it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

    it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

    it says that i need 2gb or more of memory and 8 gb or more of available space i have a macbook pro retina display and i have 4gb of memory?

  • MacBook Pro heating up and fans at full speed

    MacBook Pro heating up and gets extremely hot and fans constantly at full speed after upgrading to Yosemite 10.10 without even launching any applicaiton previously I was on Mavericks, I checked Activity monitor and a process called kexts is always running and have a large percentage of the CPU load I tried reinstalling Yosemite and the same problem happens.
    MacBook Pro 13 inch Late 2011, 2.4 Ghz Intel Dual Core i5, 8 GB 1333 MHz DDR3, Intel HD graphics 3000 512 mb.

    Thank you That solved my issue I uninstalled Cisco anytime connect. My console had that kernel running in the background giving the error every second.

  • I have a macbook pro retina display and a gaming mouse and i can't play with it

    I have this gaming mouse not an apple mouse and when i try to play with the mouse i don't move but i can walk with the WASD but with the mouse i can't move and i've had trouble for a while and i really want to know how to fix this can anyone help me, my mac is a macbook pro retina display late 2013.

    Hello abmorgan646
    Check out the article below to try out a few things to resolve issues with the flickering display on your MacBook Pro Retina. You may need to reset the NVRAM, if it does not resolve the issue, then there are links fur further assistance.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    -Norm G.

  • MacBook Pro Retina Display and USB SuperDrive

    Just wanted to let everyone know I had to update Mac OSX to be able to use the superdrive on the new macbook pro retina display.  Before that it would show me what was on the disk but I couldn't access it.  Even after I updated it I had to browse through finder to find the drive to be able to run what was on the disk, as it didn't pop up automatically.  Just wanted to give people a heads up so if anyone else has this issue.

    The superdrive not showing on the desktop may just be a setting in Finder. If it is listed in the Finder window then it is a setting in Finder to show, or not to show, DVD drives on the desktop.

  • Dead pixels on Macbook Pro Retina Display and keyboard scratches.

    Since the purchase of my Macbook Pro with Retina Displey 15" early February 2013 it has gained 5 dead pixels on the screen. If I take it to the Apple Store are they going to tell me it's my own fault and not help?
    I also found a scratch on the <H> key on the keyboard, which has removed a little bit of the black coating, allowing the backlight to shine through. Does anyone know of a solution to this, or if apple are able to help? I have already tried writing over it in black sharpie pen, but it doesn't help.

    Apple has some system they go by to determine how many dead pixels are 'acceptable' on a display - it's not your fault.
    You may be able to get a replacement key from -> https://www.replacementlaptopkeys.com/. Since Apple will probably say it was caused by user damage, you'll have to pony up the $5 for the key.
    Clinton

  • Macbook Pro Retina Display and Flash Player major issues

    Hello,
    Apple has recently released Macbook Pro's with Retina displays.
    I have tested my Flash application on the new laptop, and this is what I observe:
    1. My Flex SDK Flash application looks blurry and strange when I try to check it out from any Macbook Pro with Retina display, while looking sharp and OK from all other machines.
    On this screenshot you can sort of see the issue:
    http://i.imgur.com/UXHd4.png
    (Expand the image to the actual size, and compare the Flex SDK components with browser labels. Browser labels look crisp, Flex SDK components look a little bit blurry.)
    2. It is no longer possible to click on anything in Flash Player Dialogs, such as:
    * Flash Player Settings
    * Webcam or microphone allow/deny dialog
    * All other dialogs (peer-to-peer access, etc)
    This issue makes it impossible to use video chat applications on Macbook Pro Retina's because users can't click allow/deny when requested for audio/video access.
    I have submitted reports about this to Adobe BugBase here:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3224151
    https://bugbase.adobe.com/index.cfm?event=bug&id=3224147
    Please fix these issues.
    Andrey

    @nvhdab - If you haven't already, can you please add a bug on your issue over at bugbase.adobe.com  If it's the same as 3224151 then it sounds like it's going to be fixed soon.  I'm trying to find out exactly when, but it might be in the 11.7 release now (4/2/2013 - Flash Player 11.7.700.170 Beta)
    @scottclayton - I'm going to ask the team to revisit the click issue.  I don't have a retina display so I can't confirm the issue.  Thank you though for putting up the workaround.

  • Both my MacBook Pro Retina Display and new iMac will only format an SD as FAT16 using Disk Utility.  How do I format in FAT32

    I have a new iMac and MacBook Pro with Retina Display running 10.8.2
    When I use Disk Utility on a San Disk 2GB SD card I can only format as FAT16.  How can I format the card as FAT32?

    Just posted a problem I'm having connecting my Jaybird Freedom and iPhone5 (https://discussions.apple.com/thread/4716045). The Jaybirds connected fine with an iPhone4s and another (forgotten) device so I don't think the problem lies with the Jaybird. I'd be interested if you hear differently.

  • MacBook Pro - Case bending and separation.

    I have an 11 Month old Macbook Pro. It has been in and out of the service centre for various reasons (about 4 times i think) and i wanted to get this fixed before the warranty expires at the end of August.
    Before i start:
    I HAVE NOT DROPPED IT, OR PUT EXCESSIVE FORCE OF WEIGHT ON IT!
    Mac1 Burwood (Sydney, Australia) and Apple Australia have refused to fix the computer under warranty as they have accused me of "jumping on it"!
    Now, i have absolutely no idea who would treat an A$4000 laptop in such a way.
    I have photos of the damage:
    Normal Left-Hand Side:
    Case separation above Optical Drive! (i don't care about the wear!)
    Damaged Right-Hand Side
    Damage goes all the way to the hinge!
    I want some advice on how to handle this situation. I really just want this computer to be fixed, without having a finger pointed at me as if it is all my fault.
    **click on photos if you want to see much larger**
    Thank you in advance!
    Message was edited by: yssy

    Two pieces of advice, first by appleacare, you have until the first year anniversary of the sale to purchase it and based on your remarks of being in and out of service you need it.
    Secondly I think your options are limited insofar as bringing it to an apple authorized repair center, be that an apple store or another authorized store. Just bring photos as backup and present your case in calm manner. Its difficult to say that the problems your suffering from are form wear and tear or abuse or neglect so I think just bring it in and have them fix it.

  • Dropped MacBook Pro retina display and screen won't work

    I accidental just dropped my MacBook Pro with retina display on its left side from about 2 feet. There doesn't appear to be any external damage except for the screen which is just white with some black on the left side. I can change the brightness and everything else appears to work. Any ideas on how to fix it or how much it would cost to repair. Thanks

    Oh dear
    Call your local Apple Store to get a quote for a repair.
    And check your home insurance to see if it's covered (it might be if you have accidental damage cover and you dropped it at home).
    If you're not ready or able to afford a repair or replacement, you might be able to keep using your MBP if you connect it to an external display.
    I don't know how important portability is for you, but if you would normally only use your MBP in one or two specific places (eg home and work), you could set up one external display in each location.
    Good luck!

  • I have a Macbook Pro Retina Display and it keeps flickering.  Very annoying.  Almost seems like something else is trying to open.

    My macbook has suddenly started flickering.  I hadn't updated any software.  I did go and update to OS X but that didn't help.  Is anyone else having the same problem?

    Hello abmorgan646
    Check out the article below to try out a few things to resolve issues with the flickering display on your MacBook Pro Retina. You may need to reset the NVRAM, if it does not resolve the issue, then there are links fur further assistance.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    -Norm G.

  • Using Macbook Pro as display and keyboard for a PC

    I have a macbook pro, but I want to build a high end gaming pc eventually, but not only would i have to build the CPU, but I would also have to acquire a monitor and keyboard and all that jazz. It really cranks up a hefty price tag.
    Then the thought occurred to me, that I already have a monitor and keyboard on my macbook. Wouldn't it be great if I could use my macbook in those capacities for the PC, basically reversing the flow of information from the miniDV port and the USB ports.
    I highly doubt it's possible but I thought I would put the idea out there and maybe something would come of it in the future.

    If you are setting up a server you can use Server Admin tools to set up a new server remotely. You would need to install the Server Admin tools on your MacBook Pro and then do the remote install procedure.
    You need to collect the serial number and the Mac Address of the Mac Mini Server to enter in as the information in the Remote Install during the installation process you will be prompted to chose Remote Management and SSH for options that way you will be able to connect to the Server Remotely at anytime when configuring or afterwards.

  • Macbook pro heats up and fans go crazy as soon as I plug in charger, SMC reset doesnt help

    Hi all, my problem is that my 2011 MBP heats up and fans speed up (a lot) as soon as I plug the charger in. There's no other apparent reason. No heavy CPU usage at all, SMC reset did nothing at all. It only started recently and it goes away as soon as I plug the charger out. Laptop also has an SSD fitted into it. Someone please help, thanks

    sorted...

Maybe you are looking for

  • Error when importing through DTW for JE

    Hi All, When i try import Je through DTW it gives me the error as "You are not allowed to edit posting date". I am trying to import around 1000 transactions of which it gives me this error for one transaction, when i remove the transaction and try to

  • Loose coupling transport  in PI 7.0

    Hi,   We are trying to implemet OTO.I am tring to do a loose coupling transport in PI 7.0 from DEV to QUA.  I have created one workbench request in se09 and have exported my IR object. I can see my exported IR object in IR>Tools>Find transports.  But

  • How do I cancel a sub vi stuck in an infinite loop?

    Hi, I am attempting an implementation of the Constrained Nonlinear Optimization sub vi.  It works perfectly 99.9% of the time but gets stuck the other .1% of the time.  It is supposed to time out when it cannot find a solution, but it is failing to d

  • Java.lang.ClassNotFoundException: javax.swing.JFrame

    i have developed a program in java and it is working fine in windows xp, but when i try to execute it in redhat linux, the ff errors are generated: Exception in thread "main" java.lang.InternalError: Unexpected exception while defining class WESMOMP$

  • Creating New Logon Language

    Hello Experts, I want to configure a new logon language in SAP. Can anybody please share the step-by-step process for the same - I understand, there are series of steps to be performed by the Basis team. I would need, all the steps get the language p