MacBook Pro - connect to TV via HDMI Mini Display adaptor

Can't connect macbook pro to my TV and view/listen to what's on my mac on the tv. I am using an HDMI cable from the tv to a mini display port HDMI adaptor. When I go to system preference, display it doesn't have an Arrangement tab to mirror. It only gives me tabs for Display and Color. Any help would b appreciated.

Hello pdr4d,
Based on your post it seems you are unable to get video on an external display. The following article may help you find a solution:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Check connections
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the system
You can reset the Mac's parameter RAM and SMC.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Similar Messages

MacBook Pro Connect to TV via HDMI with Toslink...???

So I have a MacBook Pro (Mid 2009) and using a Mini-DisplayPort to HDMI will not give any audio. Only MBP (Mid-2010) I did sum research and found this video: http://www.youtube.com/watch?v=STx9PN7TPoc&feature=related which connects a Audio using a Mini Toslink to Toshlink adapter which is connecting that to a AMP. My question is: If i connect the Toslink to my TV (since I don't have a Amp) Will it still give out audio? I'm a little confused. Any help anyone...??

To Csound's good advice, let me just add that there may be a specific HDMI port on the TV that you must use if you're going to send audio to the TV separately. This should also be explained in the TV's manual.

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

I am trying to connect my MacBook Pro to my TV with a mini display port to HDMI converter. Its not working. Any suggestions?

Depends on your model TV. Read your TV user manual. The newer models have "how to hookup" instructions for computer & games.
You can also do a forum search as well as a Google search.

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

I am trying to connect my mac book pro to the tv via a mini display port and a hdmi cable, the only picture that is on the tv screen is the background picture on my computer, any suggestions?

I am trying to connect my mac book pro to the tv via a mini displayport to a hdmi cable, the only picture on the tv screen is the background picture of my mbp, does anyone know what I need to connect to my samsung tv ?

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

MacBook Pro connected to TV via rocketfish. Picture but no sound.

I have successfully projected computer screen onto to tv through rocketfish; however, sound is not coming from tv--just computer. How do I get sound to project through tv?

how is it connected? display port to hdmi?
What year is your macbook. IIRC, only recent macbook pro's output sound through hdmi. If that is your case, you will need to run a cable from the computers headphone jack to the TV

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

No sound when I connect my Macbook pro (2012) to TV via HDMI!

Hi! I have a problem with the sound when I connect my Macbook pro (bought in 2012) to a Phillips HD TV. The strange thing is that it only happens with some videos (specially youtube videos) but the sound works perfectly with films and audio files I have in my computer, and also when I watch TV online (Eurosport player for instance and other similar applications). It's even stranger because it doesn't happen all the time; last week I tried many times to watch some youtube videos and after unplugging the HDMI cable it seemed to work. As I said, with Eurosport player and many films downloaded in my macbook I don't have this problem (sound is ok all the time), and this is why I'm really confused. I suppose it's not a connection problem, otherwise I wouldn't have sound in any video, right? I've tried two different HDMI's cables but nothing has changed. Please, someone help me, as I can't figure out what's happening. Thank you very much!

Well Im not sure what the fix is for your problem, but can you please open up the sound preference next time you connect the philips tv, and make sure that sound output is set to hdmi out. Then try and play your video's etc and see if they are affected.
I can tell you I get a similar problem when, for example, I have a youtube window open and then connect the external display. The youtube video will not sound out through the cable, however if i refresh the window it works. Also the same when I use bluray player on mac, I have to close it and open it again for the sound to output through the external monitor.

Macbook Pro to Toshiba LCD via HDMI screen shuts off

I have a mid 2010 model Macbook pro hooked up to a 46'' Toshiba LCD tv using the moshi connector and an HDMI cable. Every 25-30 minutes the screen goes black for 2-3 seconds as well the sound turns off. The picture then comes back, usually to shut off again for 2-3 seconds then will remain on for another 25-30 minutes. This happens each time I connect the laptop to the computer.
I have returned the TV, connector, and HDMI cables and the issue has continue to happen. This leaves me thinking that it must be an issue with the computer. Does any one have any tips or ideas as to what I can do to stop this? Its really irritating to try and watch a movie to have the picture cut out periodically.
Thanks

Hi, Guys
I'm using a MacBook Pro with a Samsung 610 52" color monitor for studio video production.
I'm using an adapter to hook up the TV to the Mac via VGA. There are times when I can get the image on the screen, but any time I either start cold or have to change a cable, I get the message "check signal cable." I originally thought the problem was the cable, but changing out three different "known to be good" cables did not resolve. When select system preferences=>displays=>gather windows, the Samsung window with resolution options opens. Nothing as of yet immediately resolves the problem, but if I **** around with it long enough (plug and unplug cables, turn both computer or LCD off and on), eventually I get a picture. And yes, I never had this problem when we were using a Dell Inspiron. Any suggestions or resolutions, please let me know.

Macbook pro early 2011 sound via HDMI.

Hi,
I own a Macbook pro 13 inch (early 2011) and a liftrons mini display port to HDMI adapter.
If I connect my macbook to my philips tv it works fine.
And if I'm watching a photo slideshow using Iphoto I also hear the sound on the tv.
But when i'm watching a movie using VLC I only get the sound through my macbook speakers.
Does someone know how to fix this?
I tried changing the sound settings on my macbook, but nothing works.
Thanks!

That sounds like an issue you need to bring up with the VideoLAN group who works on VLC. Possibly, you might want to go to VLC Preferences and disable Audio, and let the Mac control it, but I'm not sure.

MacBook Pro Retina to TV via HDMI

So, I have my MBP Retina and I would like to connect it to my television via HDMI. I have my Mac connected to my TV via HDMI, and it shows the picture, but there is no sound! How do I fix this?!?!?!?!?!?! I need help ASAP!!!!
Thanks, Kynan

Don't worry! I just figured it out! I just had to go under system prefernces and go under sound and go under the output tab and click on the tv!
Thanks for you help anyway!

Macbook pro connects to wifi via safari but IE has connection problems. Has always been fine but recently stopped working. Urgently need to sort it out. Please help.

I have been running Rushcliff Private Practice Software (PPS) in a Windows environment using Parallels on a macbook pro for months. Everything has been working well. PPS needs an internet connection to allow synchronisation with colleagues using the same software.
Over the last 2 weeks, I keep losing the IE connection but am still able to connect to Wifi using Safari and other PCs.
Please can someone help? Urgently need to resolve the problem.
Many thanks.

Your issues are with notebook, not a workstation tower, and with Parallels and Windows. Maybe with Lion thrown in.
Hopefully you know where Parallels forums are and also that you installed Windows natively first on its own partition so you can test and run it direction rather than as a VM only as well as that sometimes takes the VM out of the equation.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro

How to connect an early 2009 MacBook Pro to a TV via HDMI

I have the cables and adapter but am only getting one image when all is hooked up.......what else need I do?
I've seen youtube instructions but I seem to lack the "arrangement menu under the "displays" preference.......
Is this MacBook unable to run to a TV with HDMI plug?

Hi mate,
Two options - either turn on mirroring in the Displays Preference panel, or have a look at the arrangement section of that panel, you should see the second monitor positioned in relation to the laptop monitor - it's "extending" the desktop - move a window from your main monitor towards the second monitor's relative location as shown and you should see it appear on your TV.
If you start your movie (DVD player or whatever) in window mode, move the window to the second monitor, then make it fullscreen - it should fill your TV and play there. You may need to muck around with the aspect ratio (16:9, 16:10 or 4.3 depending on your source) to get it right on the second display. VLC does this nicely especially if your source was converted incorrectly.
Also tick the box to display the monitor settings in your menu bar - it's handy IMO.
hth
Papa

How to connect Macbook pro to a projector with the Mini Display to VGA adapter?

When I connect them nothings happens, the display has a blue screenshot for a few seconds and then get back to the normal view of my desktop. It's the same if I digit "cmd+F2"... Please help me.

The default method for adding a second display is called Mirroring. It uses a lowest-common-denominator approach to choosing display resolution, and often guesses wrong.
System preferences > Displays > ( Arrange) and drag the superimposed representations of the two displays away from each other to invoke "Extended desktop" instead. Then you should be able to set the resolution for the projector to a more reasonable one, and your picture should appear.

Macbook pro to epson projector via hdmi cable

Projector says "no signal" when i look at the HDMI port. Any suggestions?
I would like to simply project an iPhoto slideshow or a downloaded video.

ok...did further reading and found the answer...
system preferences....displays...arrangement tab.....check the "mirror displays" box.

MacBook Pro - connect to TV via HDMI Mini Display adaptor

Similar Messages

Maybe you are looking for