Macbook Pro connected to HDTV full screen problem

I connected my Macbook Pro to my TV via HDMI. When i have an application on the TV (safari) and press the full screen button (upper right corner with the 2 arrows) my Macbbok display shows this grey area. If fulscreen an application on the Macbbok display the same thing happens. Aslo when i navigate through the full sceen apps in one display hte other display also changes. Is there something that solves this problem?

This is just an educated guess, but I think your problem may be distance. It sounds like you've got 60' of cable running to a splitter, then more cable to two TV's that are 50' apart. This article seems to indicate HDMI distance isn't reliable with that much cable.
http://www.bluejeanscable.com/articles/how-long-can-hdmi-run.htm
An easy test would be to try it with shorter cables. If that works at least you know where your problem lies.

Similar Messages

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

I cant get my macbook pro to have a full screen in safari please help?

I have tried getting my full screen back and its not working please help?????

First off, iOS 7 does not run on Macs.
Secondly, Mac Pros are desktops, and MacBook Pros are notebooks. Something is not jibing with your signature and what you say you are running. Please go to Apple menu -> About This Mac to tell us your Mac OS X version.
Go to Safari menu -> About Safari, or Help menu-> About Safari to tell us your Safari version.
That will tell us if fullscreen is an option.

My macbook pro does not display full screen

my macbook pro wont display full screen in any appp. it has a one inch margin black on both sides

Hi there joemoto,
You may need to adjust your display resolution. Take a look at the article below for more information.
OS X Mountain Lion: Adjust your display resolution
http://support.apple.com/kb/PH11462
-Griff W.

My new Macbook Pro 13 keeps minimizing full screen applications and sending me back to the desktop. Any Help?

I can't stay in full screen applications without being returned to the desktop within 30 seconds. Is anyone else experiencing this problem or can assist
I am testing it without running any applications other than safari in full screen. It act like it is "swiping" me back to the desktop screen. I am not touching my trackpad or keyboard.
Thanks,
Corey

Do you have Google Drive installed? At the following thread at least one person had a similar issue as you: for more details please check out this thread:https://discussions.apple.com/thread/5526061?tstart=0

Why is my mouse slow when I connect my MacBook Pro to a HDTV?

When I connect our MacBook Pro to our HDTVs, the mouse and cursor lag. Is this a problem because we are using the VGA connector? Should we be using HDMI?

Does the iPod charge?
Does the iPod appear in iTunes?

What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.

Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?

My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?

My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?

Christinag1317 wrote:
My macbook pro's memory is full and I purchased an external hard drive. I am using timemachine, but need to earse/free up some memory on my laptop. How do I do this?
Ok when you refer to "memory" that is the Random Access Memory which is temporary memory the processor (worker) uses to store stuff while it's using it. Power goes off whats in the memory is gone.
Your storage drive is where data is pernamnetly stored if the power is on/off.
So what you really mean to say is your storage drive is filled up and you need to make some room.
You have a TimeMachine drive, what this does is makes a image of your internal storage drive as a backup method, it also allows some "back in time" restoration of your previous deleted files depending how much space is on that drive. The more space, the less data you have, the more days you can go back in time to retrieve something.
Unfortunatly the TimeMachine drive is not a extra space storage drive, it automatically rotates what appears on your internal storage drive. So if you delete something from the internal drive, it eventually gets deleted from the TimeMachine drive.
So you need to make some more room on your internal drive, this is rather easy, all you need is ANOTHER external drive and connect it to the Mac. Give it a name like ExtraStorage#1 and thenyou will have to decide which of your User files you really don't need on the internal drive.
For instance the best choice would be to move some movies out of your Movies folder to another MoviesExtra folder on the ExtraStorage#1 drive.
Movies take a LOT of drive space and you can always copy them on or off, or watch them from the ExtraStorage#1 drive as well. But if your going to do this a lot, you should consider getting a Firewire 800/400, USB 3,2,1 combination drive as Firewire 800 is fastest and decently priced (Thunderbolt is very high priced and overkill at this time)
The other things like Documents are quite small, Pictures can take a lot of space if you have a lot, but if you need them on the internal drive then that's better. Music one tends to use a lot or manage playlists and such, but perhaps some music you may which to move off or "prune", I suggest always burning data DVD's of music especially for extra backups.
Once you have freed some room on the internal drive, this liitle neat program will show you what is taking the largest amount of space on your internal drive.
http://grandperspectiv.sourceforge.net/
After a scan, right click on the big squares to "revel in Finder" to show you what's taking the largest amount of space, be warned it also opens up hidden system files and folders, which you won't be able to move. So concentrate on what's inthe Users folder.
Likely if you have a lot of Movies this is the biggest culprit on most standard internal hard drives. Also if you have something in iTunes that's auto-downloading something like PodCasts and not deleting the older ones and you forget. So go there and fix things and that can free up drive space.
If you bought a small SSD with your new Mac, then the price of that SSD has come back to haunt you with low storage space, you will have to think carefully what you can live without on the internal drive.
Once you have slimmed things down, TimeMachine will update to reflect your slimmer internal drive. What this means is there is only one copy of your data on the ExtraStorage#1 drive.
You need to maintain two copies of your data at all times on seperate hardware, so now you need ANOTHER storage drive (ExtraStorage#2) to copy everythinng of ExtraStorage#1, or else if you drop or have a mechanical problem with ES#1 all that data will be gone!
If you wish to learn more then I suggest reading these two links
https://discussions.apple.com/message/16276201#16276201
http://pondini.org/OSX/Home.html

Macbook Pro connection to Sony Bravia LCD Color TV

I have a macbook pro and I'm trying to connect it a Sony Bravia LCD Color Television. The macbook detects the sony tv and brings up a dialogue box about it. However, on the tv it says no signal. Anyone have any suggestions as to why this is happening?

I had the same problem with a 1080i Bravia Sony and a MacBook Pro connected with a DVI-HDMI lead - it turned out to be a very simple solution - you have to make sure you are looking at the right AV channel on the TV. The mapping of AV1-6 to the ports on the back is not obvious at all (in this case it was AV4 that was the correct AV port). The Bravia also has the option to skip AV channels if desired - so if in the preferences you have disabled ports then you need to make them available to skip through.
The picture is very sharp indeed with a DVI-HDMI lead - far far superior to a vanilla SVGA cable. Sound is automatically selected from an analogue input (2xphono) on one of the HDMI ports so make sure you select the right one on the back.
(p.s. just to emphasize - the DVI-HDMI does not map to the 'PC' port it is another AV channel)
Message was edited by: David meme

MacBook Pro connection to Sony BRAVIA KDL32EX308

Hi,
Can I use Apple's VGA Adapter to connect my MacBook Pro (Mac OS X 10.5.8) to Sony BRAVIA KDL32EX308. Is it compatiable? If not, which adapter I should buy?
Thank you in advance.

I had the same problem with a 1080i Bravia Sony and a MacBook Pro connected with a DVI-HDMI lead - it turned out to be a very simple solution - you have to make sure you are looking at the right AV channel on the TV. The mapping of AV1-6 to the ports on the back is not obvious at all (in this case it was AV4 that was the correct AV port). The Bravia also has the option to skip AV channels if desired - so if in the preferences you have disabled ports then you need to make them available to skip through.
The picture is very sharp indeed with a DVI-HDMI lead - far far superior to a vanilla SVGA cable. Sound is automatically selected from an analogue input (2xphono) on one of the HDMI ports so make sure you select the right one on the back.
(p.s. just to emphasize - the DVI-HDMI does not map to the 'PC' port it is another AV channel)
Message was edited by: David meme

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best.

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Have most recent macbook pro connected to thunderbolt via thunderbolt cable. Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard. Help

Hello QuinnDev,
Thank you for posting in the Apple Support Communities. It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on. I found an article that talks about closed clamshell mode. You would have to fulfill the following requirements to use your display this way:
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
You can find all the steps and the full article here:
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/HT3131
I hope this helps!
All the best,
Sheila M.

I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

Macbook Pro connected to HDTV full screen problem

Similar Messages

Maybe you are looking for