Macbook pro craches when scrolldown buttons are pressed
Hi everyone.
I'm experiencing systematic crashes of my macbook pro (10.6.6) each time I do the following:
- turn on skype camera,
- click on Spotlight
- click on Firefox scrolldown buttons (such as bookmarks, ">>" button).
I've seen some threads about the skype issue. However I my case, the computer crashes, not the app.
Any idea ?
Thanks, Nico808
It may be helpful if you identified the exact MBP model that you have.
Boot the MBP onto the recovery partition and select from the 4 option menu Disk Utility. Run Disk utility>First Aid, verify and Repair.
What is the result?
Ciao.
Similar Messages
-
hello please help me my MacBook Pro screen when desktop switching fingers pressing 3 distorts a bit, with him?
First, remove Comodo. You don't need it, and it sounds like it is causing a problem.
The other symptoms sound like you have adware installed. Comodo might have detected some components of that adware, or it might not have, but whatever the case, you should NEVER allow any anti-virus software to quarantine or delete files from your computer. See: How to remove infected files.
Regarding the adware, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.) -
MacBook pro freezes when volume button is pushed
When I log in if I press the volume button up down or mute my MacBook pro 13 inch 2011 will freeze for a few minutes then act normal...i have reset pram and smc multiple times and problem persists...any guess what it could be?
Welcome to Discussions, MeadowsLing
Problems like those you mention are not unusual for new Mac users, but they are not widespread defects, either. They are usually easily corrected. Here is a good way to start.
For slow performance: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8496.html
Also: http://docs.info.apple.com/article.html?path=Mac/10.5/en/8492.html
For iSight problems: http://support.apple.com/kb/HT2090
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support. -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?
Start up in Safe Mode.
http://support.apple.com/kb/PH4373 -
Downloaded iBooks on my Macbook Pro but when I tried to sync it on my iPhone, this appeared: "Are you sure you want to sync books? All existing songs, movies and TV shows on the iPhone “My iPhone” will be removed". Love the iBooks as well as music. I really don't want to loose my music. HELP!!!
From the message you are receiving, it sounds like you either, 1) haven't synced your iPhone with that computer before, 2) are using two different iTunes accounts, or 3) both. If you have purchased music or movies through your iPhone with a certain iTunes account and purchased books through iBooks on your MacBook through a different iTunes account then there is no having both on the phone.
Apple doesn't allow content from two different accounts on a device at the same time. Also if two "libraries" have been created, one on the iPhone and one on the Macbook then syncing will erase data that is not associated with that particular library.
If you are using the same iTunes account for both, then you should be able to redownload any purchased items (music, books, etc.) from iCloud, assuming you have set that up.
I hope this helps! -
I purchased a new MacBook Pro and when transferring files iphoto did not transfer. I have a question mark in the place of the icon. My pictures are in library but can't properly access iphoto. Thank you
Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac. You should be able to set a password for it. Save it. Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer, I suppose, back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity. As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
This handy article from Apple explains how
How to move your iTunes library to a new computer - Apple Support''
don't forget to de-authorize your iMac if you don't want to play purchased stuff there
and re-authorize your new macBook Pro
time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine and go for it. You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups of your stuff. -
I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.
I have a macbook pro and when using facetime people are unable to hear me, even though i can hear them.
-
I recently had to switch out the hard drive on my Early 2011 13" MacBook Pro. When I got the computer back from the Apple Store I began loading my old content onto the machine. When previewing and opening files, they would appear with randomly coloured splotches of pixels on them. This continues to happen when browsing folders on my machine.
The files do not show up with splotches on other computers, and are not in the same places each time I open the file, which leads me to believe they are problems with my machine and not the files themselves.
I hypothesise this is the graphics card, but I don't know enough about the hardware to know for sure. Any help would be greatly appreciated.
See examples below.To follow-up. The problem has gotten worse, as it not only displays glitches during file previews, but imprints glitches on exported files. No good.
There are many issues popping up now related to 15" and 17" MacBook Pros from 2011, and I wonder if this is a related issue. In either case, I would love a response from someone at Apple about this issue.
See possibly related issue here:
2011 MacBook Pro and Discrete Graphics Card
And some updated screenshots of exported files: -
I cannot turn on my MacBook pro. When I turn it on all I get is a grey screen with a grey spinning thing under the apple. Can anyone help?
Reinstall OS X.
Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
====================================
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
What is wrong with OSX on the MacBook Pro and when will it be fixed?
When running Second Life or Worlds of Warcraft or just quick browing... anything graphically intensive on the MacBook Pro, the machine slows to a crawl, eventually completely freezes up. The cursor doesn't move, pressing the Caps Lock key does not change the Caps Lock light and the machine is no longer reachable from any other machine on the network. The only means available to recover is to hold the power button down until the Mac powers off and then restart it. This doesn't happen when running XP through boot camp and windows client versions of these programs. What is wrong with OSX on the MacBook Pro and when will it be fixed? Thanks.
I am not sure that this relevant to the discussion. But I am searching for anyone else who is seeing random freezes on 10.4. I usually don't see anything in the log after I have to do a hard reboot of the box. However, I have noticed some I/O messages when I have been able to console into an affected device, but have not captured to this point. Also, when I am able to console, the box will accept the login, but times out when trying to authenticate the password.
I am also seeing a server freeze on my G4s. I am able to reproduce the problem with a clean install from the 10.4 disk. The issue is reproducible with tcpdump, dumpcap as well as tshark. I have also tried compiling the tools with different versions of libpcap. I am able to reproduce this problem every time with a packet generator sending small packets.
It seems that the small packets aggravate the underlying cause. As the more small packets are sent the quicker I am able to reproduce the problem. With a mix of packet sizes, as seen in most networks, this issue is hard to reproduce. We have been using the G4 since 2003 as a packet analysis tool and it has been very stable up until we attempted to do analysis of a VOIP network with 10.4. The small RTP packets in conjunction with 10.4 seem to be the culprit.
So far I am not able to reproduce the freeze on a 10.2 or 10.3 image. This is not isolated to bad hardware, as I have been able to reproduce on 4 different Xserves in my labs with similar configurations.
I currently have a G4 set up in my lab and would be able to supply any info that may be needed to track down this issue. I have been thrust into administration on this box recently so I am not very familiar with debugging procedures on the Xserve or MacOS. However, I have the hardware and the test equipment that many in a production setting may not have at their disposal. So if anyone, with extensive knowledge of the Xserve or MacOS, is willing to work with me to track down this issue I am willing to do the leg work in the lab. I would appreciate any assistance that is available. -
I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I upgraded to Lion on my MacBook Pro. When I close Address Book it automatically quits. When I close other applications they stay open on my task bar. How can I get Address Book to stay open on my task bar?
Hello charlgilbert,
It sounds like you would like to send a text from your phone number on your portable computer. You can do this by setting iMessage to start new conversations from your phone number in the Messages settings:
On OS X, find out which addresses are enabled:
In Messages, choose Messages > Preferences > Accounts.
From: iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thank you for using Apple Support Communities.
Regards,
Sterling
Maybe you are looking for
-
Fixed layer in a pdf created by illustrator
Hi guys, I'm an absolute beginner in illustrator and i have perhaps a trivial problem: I create a map of a region with different information each on an own layer and additional one layer with the legend, which should be visible all the time. After al
-
Trying to share ethernet over WiFi but connection options are greyed out?
Newby question: I have a Mac Mini 2GHz C2D running OS 10.5.5. I am connected to the internet using my cable modem. When I use the Sharing system preferences control to establish Internet Sharing the boxes with "Share your connection from" and the box
-
Hi! Im from Finland, so this text is translated by Google Translate and me... Could you help me with the printing problem ? I have Windows 7 and the LaserJet 1020 . I would like to print email from Gmail , but when I press the print button in Gmail ,
-
Hi all, This is my first post in SDN. Can any one tell me how to submit a form in DYNPAGE via radio button. If I check the radio button on, it should submit the form and should return the same page. Appreciate you help. Thanks, Karthik
-
Is there a way to allow users to paste in a graph from Excel into a textfield?
I have not seen this capability, wondering if it is possible. Users of my form will need to past in a graph they created in Excel as part of the write-up they will discuss in a textfield. Barring that, is there a way to identify an image object tha