Macbook Pro detects the battery but don't use it

So my battery is really low and I already ordered the new one but still...
Macbook detects my battery. Coconut shows its health charge level and other stats:
However it won't charge it neither it will use it as its power source.
My Macbok will not even start without AC power.
I already tried to reset everything I could (like PRAM NVRAM and SMC).
Any suggestions?

Yeah the battery is nearly 3.5 years old and it has warn out. Batteries only last so long then they fail. Even if it show it is charged it does hold sufficient charge to power the system.
Replace the battery.

Similar Messages

  • Is there any way to buy a MacBook Pro in the USA, but with a European plug?

    I'm going to get a MacBook Pro from the USA, but I live in Belgium, so I wondered if you could get a plug for Belgium straight from the US, or if you needed an adapter.

    Apple retail stores will take cash.  But, I would say it is very uncommon, in my experience, in their stores.  The sales personal are all set up to deal with credit or debit cards remotely (ie. there are no "checkout" lines, it is all done wirelessly), so dealing with cash is not the normal mode of transaction.
    Not many shoppers routinely wander around malls with several thousands of dollars in cash in their pockets (even most "cash" only folks would likely use a debit card, not actual cash)!  Plus, since many people get special compensation with their credit cards (not talking points and such, but my VISA card gives me double the manufacturers warranty, as well theft and accidental damage insurance coverage for the first 90 days), even those of us who never carry over a balance still prefer to use the credit card and get the perks (I especially like the insurance, as I have to at least get my expensive item home safely before I can use it).

  • Frist charge : shall I use the macbook pro on the battery until the computer shut down automatically? Thanks.

    Hi. First, sorry for my English, i'm not a native speaker.
    It's the firt time i buy a macbook (pro) (and the first time i post here).
    I have recieved my macbook pro today, firt i've pluged it to the home electricity, and the i've started it. Then, when the battery charge was full, i've unplugged it. And now, my main question is : Shall i used the computer on the battery until it shut down automaticaly, or shuld i plug back the computer to electricity before it shut down?
    Thanks a lot,
    Jean-Alexandre.

    Portables with built-in batteries
    Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure outlined in this article. These computers use batteries that should be replaced only by an Apple Authorized Service Provider.
    MacBook 
    MacBook (13-inch, Late 2009) and later
    MacBook Air
    MacBook Air, all versions
    MacBook Pro
    MacBook Pro (13-inch, Mid 2009) and later
    MacBook Pro (15-inch, Mid 2009) and later
    MacBook Pro (Retina, Mid 2012)
    MacBook Pro (17-inch, Early 2009) and later
    http://support.apple.com/kb/HT1490

  • Display won't turn on even though my Macbook Pro detects the display

    I've had a long running issue with this but now rather than intermittantly, it just won't work at all. I have a 17" Mackbook Pro running Lion and an older style aluminium 23-24" cinema display (the boxy one). The problem also exited under snow leopard. I used to arrive home, pull my MBP out of my bag, place it on a stand, plug the power, USB for my keyboard and mouse and display cable (inculing the USB and firewire) and hit the keyboard and my display turned on and off I went. But now when I try to do that, I get the light on the display flash once and then the display appears to be dead. I'll go into detect displays and it's there and detected but I can't for the life of me figure out why I get no response from my monitor other than one flash from the little power light. Anyone know how I can fix this? Is there a fix or is it a hardware problem? I've zapped the PRAM and done an SMC reset. No dice.

    This is a long-standing problem we've all been waiting on a fix from.  I was rooting for the EFI update this morning to fix it, but no love.
    I have a MBP 15" early 2011, with a 27" Cinema Display (the last pre-Thunderbolt one)... and periodically, when returning from somewhere and plugging the Mac back in, it acts like it's seeing the monitor, but just doesn't display.
    I've found, after a year of this, that the following all helps:
    1) leaving nothing else plugged in while first plugging in the display.  Don't hook up the power or USB, don't have anything plugged into the USB hub on the back of the monitor, or it won't ever detect.
    2) Just keep trying... leave the MBP open, plug in the display port and nothing else... if the big monitor doesn't turn on, but the MBP display flips to "I'm an extra display" mode, unplug, wait for it to go back to "MBP is solo display" mode, then repeat... eventually, for me at least, the big monitor will turn on for real, then I can close the MBP and all is well.
    This is sucky, but it does eventually get the 27" to show something. 
    The other symptoms are all the same... when it's doing this, the computer thinks it's displaying to the 27", USB and power are being sent to the MBP just fine, audio's working... just nothing is actually on the display.
    Oh, and for me, it also does it sometimes when the 27" goes to sleep, so I have the syspref set to "never sleep"... it goes black from the screen saver, but never turns off, 'cause then it's iffy if it'll come back on.
    I'd LOVE for them to eventually fix this... it's something in either the MBP firmware, the monitor firmware, or just something wrong with one or the other that isn't fixable... but it'd be nice to know.
    In the meantime, I rarely use my MBP as anything other than a desktop nowadays, so I leave it plugged in, don't let the monitor sleep, and all is well.

  • Using a MacBook Pro without the Battery?

    Hello!
    A user in our office left their MacBook Pro (2007, OS 10.6.8) locked up in their desk during a holiday break. When they returned, the battery had swollen enough to force a corner of the access panel open. I removed the battery back and tray to inspect the insides: clean and dry. There appeared to be no leakage. We tried starting it up. The  but the screen wouldn't even flicker. It remained black. (I noticed, too late, however, that the user kept holding down the power button when they didn't get what they were expecting from the screen.) The model is a 2007 MacBook Bro with Mac OS 10.6.8
    A couple questions:
    1) I've never heard of a laptop battery swelling up on its own after lying dormant for two weeks. Is that possible? What are the normal indicators of a failing battery?
    2) Is it possible to restart the MacBook without the battery pack and tray inside? What is the best procedure for doing or determining that?
    Thanks for any help!

    Brady_LS wrote:
    Hello!
    A user in our office left their MacBook Pro (2007, OS 10.6.8) locked up in their desk during a holiday break. When they returned, the battery had swollen enough to force a corner of the access panel open. I removed the battery back and tray to inspect the insides: clean and dry. There appeared to be no leakage. We tried starting it up. The  but the screen wouldn't even flicker. It remained black. (I noticed, too late, however, that the user kept holding down the power button when they didn't get what they were expecting from the screen.) The model is a 2007 MacBook Bro with Mac OS 10.6.8
    A couple questions:
    1) I've never heard of a laptop battery swelling up on its own after lying dormant for two weeks. Is that possible? What are the normal indicators of a failing battery?
    Swelling is a common indicator of a failing battery.
    2) Is it possible to restart the MacBook without the battery pack and tray inside? What is the best procedure for doing or determining that?
    Not always, and even if you can the MBP will run at a lower speed.
    Replace the battery and all other components that were removed.

  • I tried to download video from RCA Small Wonder EZ201 to my new macbook pro.  Macbook pro recognizes the device but then message appears that device was improperly ejected when it is still connected. How can I download these videos?

    When I connect the RCA Small Wonder to my MacBook Pro, the device is recognized in finder as EZ201.  I tried to copy the video files in the folder but within a minute or two, I receive a message that the disk was ejected improperly, even though the device is still connected.  I was able to download the first few videos before it stopped working and was able to play them using Perian.  However, when I tried to connect the device again, it froze my system and I had to force a shut down by turning the computer off. Why is the device initially recongized but then shows as improperly ejected when it is still connected? How can I download the videos if the MacBook Pro won't allow the device to stay connected?

    A picture of a screen that suggests my new MBP Retina never connects to the "Macbook Pro backup ("StefanTimeCapsule")
    This is the one that has the files for the backups procured by the Time Machine program. But it can't "connect"-- You 'll see int he sideways pic (sorry!) that the options STILL says "connecting"
    Do i have to make these Time Machines more open to connection?

  • I have a 2011 MacBook Pro and the battery has died what kind of battery do I need?

    What kind or battery does my late model 2011 MacBook Pro need?

    The one that your Apple Store or your Apple Authorized Service Provider will install. MBPs from 2010 on forward do not come with user-replaceable batteries and special tools are needed to remove the one within. Plus whatever one you get outside of the official channel will cost the same if new, so there is no sense in going solo on this.

  • Will playing excessive need for speed  games on my macbook pro damage the arrow keys(i play using them) ??

    hey guyz i wanted to ask whether playing excessive (1-2 hours daily) need for speed carbon on my macbook pro using the arrow keys to control the car damage the arrow keys of the MBP??
    pls answer asap i am worried..

    I don't think that you have to worry about arrow keys because they won't damage with their use (unless you hit heavily these keys). Using games, there are other things to worry, as the temperature of the Mac, but fans will turn on automatically when your Mac needs

  • My MacBook Pro accepts the DVD but does not read it ( no icon too )- I cant eject it too!!

    Hi,
    I have a MBP 8.2. My MBP accepted a DVD in but after some whirring noises, it does not show any DVD icon or read the DVD. I checked to see if i could see the icon in My diskUtility; but it isnt shown there. I opened iDVD and checked if i could open a new project,; it asks me to insert a DVD. So apparently it doesnt know there's a DVd in it.
    I tried restarting while pressing the trackpad button, but it doesnt work . I think Ive tried almost all the tricks mentioned on every site. I dont want to do the Card trick as it would make my warranty void. I should also probably mention there is no emergency eject hole.
    Please HELP! Is there any other way to get the CD out? . Also would upgrading to Lion help with this problem??

    Have you tried to enter in Terminal (in the Utilities folder):
    drutil eject
    and then press the 'return' key.
    If that fails, position the MBP where gravity is your friend, shake it a bit with a vacuum cleaner engaged.
    Last resort is the Apple store.
    Ciao.
    Installing Lion will not solve this problem.

  • I have recently bought a brand new MacBook Pro and the battery will not charge

    When the magsafe adapter is connected. Has anyone else got this problem. N.B. The charging icon in the top right hand corner only displays the words (Not Charging)
    I have been told by Apple Care to try a PRAM reset and a SMC reset, but the light on the mag safe never turns amber, just stay lit green.

    Hi...
    At least try some troubleshooting before taking the Mac in...  these are very easy procedures to follow.
    Try here >  Apple Portables: Troubleshooting MagSafe adapters
    And definitely try Resetting the System Management Controller (SMC)
    If that doesn't help, try Resetting your Mac's PRAM and NVRAM

  • MacBook Pro Retina, Yosemite. I don't use Adobe CS5 any more. How do I kill the "To open 'CS5ServiceManager'" window that pops up every time I start up

    I want to kill a ADOBE product related window that pups up on startup.

    Look in a few locations in your finder under Library/Startupitems  and also /Launch Daemons and /Launch Agents (also under Library) and also look under you "user account name"/library for these same sub folders.  Also look in the System Preferences panel for "users" and then click the Login Items tab.
    Somewhere in one of those places will be a file that is starting that Adobe item. Copy it as a back up to another place and then delete it and reboot to see if it gets rid of that message. Then if it does, test Creative Cloud, etc,  to make sure that still functions as expected.

  • How do i set up my macbook pro for the software i want to use

    how do i customize the building of my mac?  i want to add the software that i want?

    Most of the factory software-installation options have been dropped recently. This is probably because almost everything that Apple used to offer to preinstall for you can now be obtained very quickly and easily through the App Store.

  • Kernal_task is taking up 300% CPU on my macbook pro while on battery

    Kernal_task is taking up 300% CPU on my macbook pro while on battery, but goes back to normal while it's plugged into power source.  Battery life is still normal.  Any suggestions on how to fix this?

    I just received my MBP Retina yesterday. I have not installed anything and the system is running so slow that when I type the text on the display is lagging behind my typing. Scrolling, app switching, etc. are all either choppy or I have to wait. Activity monitor shows kernal_task %CPU jumping between 500% to over 600% with 83 threads and about 675MB real memory. The fan is on continously, does not matter if it's plugged in or on the battery. NOT A GOOD FIRST TIME EXPERIENCE FOR ME.

  • Macbook pro says not charging but still the battery is charging

    macbook pro says not charging but still the battery is charging

    This isn't reference in any of the online support material that I've seen. Do you have a link to support this? Just curious is all.
    I had a similar issue on my wife's '09 MBP. Initially I thought it was the battery seeing as it's an older machine, but we tried resetting the SMC (after a bunch of other suggestions) and that seems to have done the trick.

  • I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

    I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

    Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

Maybe you are looking for

  • Field symbols and READ TABLE with system code 4

    Hi, I have a hashed table and I am using field symbols to point to it to retrieve the field content. I then use it in the READ TABLE statement in the following way: Loop at x_data assign <fs>. ASSIGN COMPONENT 'xxx' OF STRUCTURE <fs> TO <c1>. ASSIGN

  • Can I use new install disks for older computer?

    I have a new MBP (which I'm very excited about!). I am going to pass my two-year old MBP to one of my college kids. I would like to wipe it clean as he will be transferring all of his own info onto it from his current MBP (which will then be passed d

  • Rebuilding Android Folios

    Hello, I'm looking for suggestions on workflow for Android 7" tablets. We currently have apps in both iTunes an GooglePlay store (and Amazon). Until now, I had been using the 1024x768 to build folios across all devices. However, we just bought a Goog

  • Selling semi-finished as finished product

    Dear Experts, A finished material FINMAT has a component COMPMAT which is procured externally . The production order is dummy production order which should not incurred any cost for activity or overheads. The GR of the finished production order shoul

  • Missing Recyle Bin! Help

    The recyle bin disappered from my Satellite L305-S5894.  I'm on Vista. What do I do? Where do I look for it?