MacBook Pro Display Issue

I have a macbook pro since April, 2012, So far I had no issues. However, today the screen has turned blueish and pixelated. I could still use it without any issues however, the display seems to be still there. I have tried restart and Command + Option + P + R key restart option also. If anybody had a similar issue and was able to resolve it on their own ?

I'm not sure why you'd say that since I mentioned in the OP that I was able to run the computer fine via ADR.
Regardless, I've since found that my MBP was part of the "NVIDIA" debacle, and as such, is eligible for free repair by Apple.

Similar Messages

  • MacBook Pro display issues-is this a TS2377 problem?

    Has anyone had their screen turn into back and white gigsaw puzzle pieces before displaying contents correctly? 
    If this is not a TS2377 issue, any ideas what could be causing  it?

    I have an issue which I think is the TS2377 issue - where the built-in monitor on the 15" MacBook Pro from that time period has odd blurry and blinking lines all over, and the colors in many places have gone all psychedelic.
    BUT when I plut it into an external monitor via the VGA port the video is fine. I can't figure out if this could still be the TS2377 issue, or if it could be the logic board. Or, is that part of the logic board??
    Thanks

  • 15" MacBook Pro Display Issue

    I have a 2010 15" MacBook Pro running Lion (10.7.4) and a NVIDIA GeForce GT 330M display adapter. I have an occasional issue that when I have closed the display and let the computer go to sleep and then re-open the lid to use the computer, the keyboard lights up, but the display does not come on. I then have to hold the power button to power down the machine and reboot.
    Any suggestions?
    Thanks!
    Adam

    I sometimes have this problem also. They way i fix is i just close the lid again and reopen it. that works for me.
    Tyler

  • New MacBook Pro Display issue

    Hello,
    Has anyone an idea what can lead to this behavior? My old MacBook Pro doesn't have this problem.
    http://www.youtube.com/watch?v=F-C2i1m5OKs
    http://www.youtube.com/watch?v=_OE8bY9t7PU
    The problem occurs during wake up from a power savings mode (turned off display or suspend).
    Sometimes it works, sometimes it doesn't and produces mess as you can see in the video.
    Changing between the GeForce 9000M and the GeForce 9600M GT changes the behavior. With the GeForce 9000M it works more consistently, I simply see occasional  flicker while using the screen. With the GeForce 9600M GT, if the image stabilizes, then it works without flicker.
    Do I have to return the MacBook Pro?
    Thanks

    +Do I have to return the MacBook Pro?+
    Yes, you've got a serious hardware problem there ...

  • Replacing macbook pro display

    Hi All,
    Have anyone ever replace their macbook pro display? I just want to know how much is it. I have the original macbook pro with 2.33 GHz processor. It seems I have caught the well known smudge issue on the screen. The thing is, the machine still functions well but the smudgy screen is annoying.
    Perhaps if changing the screen is too expensive the I might get a new laptop instead, I just don't want to waste a perfectly functioning machine.
    --Thanks in advance

    I just want to know how much is it.
    Call up an AASP or any vendor that sells Mac computer parts & ask for an estimate. Make sure they include the taxes & labor if you want them to replace the display.

  • My macbook pro displays a folder with a question mark on it when it turns on. What does this mean and how do I fix it?

    My macbook pro displays a folder with a question mark and won't open. What does this mean and how can I fix it?

    it means your HD and the software can't find each other, the following article tells how to troubleshoot this issue:
    https://support.apple.com/kb/TS1440
    hopefully you have backup of your data since sometimes this means the HD is crashing.
    if the article doesn't resolve the issue i would take the mac to apple store or service provider and have it looked at, the following link tells how to find one close to you:
    https://locate.apple.com
    good luck!!

  • Need help with 2008 macbook pro superdrive issue pleasee

    hello,
    I have this macbook pro
    Model Family: MacBook Pro
    Display: 15"
    Processor Type: 2.6GHz Core 2 Duo
    Model Number: A1260
    Color: Aluminum
    Factory: China
    Production Year: 2008
    Production Week: 22 (May)
    Production Number: 774
    200 gb hd
    4gb of ram
    also apple care til jun 11
    OK so I bought the computer for 650 from my friend and soon after buying found a problem. The problem was the optical drive not reading all the disc that I put in the system. So I took the macbook pro to apple they installed a new super drive. I get home today and try to install snow leopard and have a issue. The way I went about was starting up holding the option button and waiting to boot from the disc for a fresh install. First time I tried I got a symbol that look like the restricted sign you see when you cant smoke in a area ect... So I restart and try again this time I get to the install screen click does the estimation ect.. 34 minutes than goes to 28 minutes pretty much has frozen there now, and after waiting all this time about 20 minutes I get the spinning beach ball. Also forgot to say that the super drive is now super dooper annoying loud and make odd sounds too with vibration. So I guess make another apple gen bar apt? And have them possible replace the super drive again?
    update just got an error occured while installing mac os x still have spinning beach ball

    I'm guessing Apple didn't do a good job. I think you need to make a return trip. And politely remind them that you're making a return trip.

  • Replacement 17" MacBook Pro Display: Report

    Yesterday I received a replacement display for my 17" MacbookPro. The new display is near perfect. It replaces one that had unevenness and bleeding around the bottom of the screen. Finally I have a good screen. There was one dead pixel near the bottom left of the screen. Because it is so near the edge there is no use in trying to get another one.

    Hi,
    Good news, I am happy for you . I just got my third display, which is as grainy as the second one...
    The first display was of very good quality. Unfortunately, after a couple of months, a weird gray stain appeared in the upper part of the display (it looked like an artifact behind the glass). So, I asked for a replacement and was very disappointed by the grainy aspect of the new display. That's when I became aware of the whole issue with MacBook Pro displays...
    Do you happen to know what is the manufacturer of your new display? If you could let us know, that may help us in interactions with Apple...
    Following the instructions on http://peewaiweb.free.fr/#whatisthisallabout, I was able to determine that my poor display is a Samsung one (LTN170P2). It's pretty easy, you just grab the SwitchResX control panel from http://www.madrau.com/html/SRX/DL.shtml, click on "Export DDC" and find the LCD model type in the generated file.
    I'd be very interested to hear about people who are happy with their display, so that I can tell Apple Support what brand I would like to get as replacement...
    Cheers,
    Olivier
    Yesterday I received a replacement display for my 17"
    MacbookPro. The new display is near perfect. It
    replaces one that had unevenness and bleeding around
    the bottom of the screen. Finally I have a good
    screen. There was one dead pixel near the bottom left
    of the screen. Because it is so near the edge there
    is no use in trying to get another one.

  • Macbook Pro Wifi Issue

    I incorrectly posted this in the wrong thread this morning.
    I'm hopeful you might be able to help me diagnose a problem I'm having. I'll provide as much detail as possible.
    I have a first generation MacBook Pro. As of this morning I was running 10.5.6 and up until this week was using a linksys router and a comcast cable modem.
    I used to have a great wifi signal throughout the house (always full strength), and around 12-18 months ago noticed the signal would weaken. The best I would get would be minus the top bar on the signal, and usually only if I was directly above or next to the room with the router. There were no new phones or devices added that might adjust the signal. On the other side of the house, I would have no signal at all.
    My wife has a nine year old ibook and has no issues connecting through wifi.
    When I bring my laptop to her parents' house or to the Apple store, where they use Belkin on N or Airport Extreme, I get a full signal.
    I've recently suffered a hard drive failure and had a replacement drive installed. The problem persists despite the software update.
    Not knowing if it was a router issue or an airport card issue or a combination thereof, I went to the Genius Bar. The genius recommended I upgrade my router to Airport Extreme, and if that doesn't work to return it and he'd focus on the airport card or antenna. I could get the flat rate repair (no AppleCare at this point) for $320+ to repair the problem if Extreme didn't work.
    I installed the Airport Extreme router and got a full signal in the basement, far side of the house, upstairs - everywhere. Until around 10pm. The signal died from the basement. If I walked into the room with the Airport Extreme router, I'd get a full signal. If I left the room, I'd get a partial signal. If I walked any distance (10-12 feet), the signal would die. I restarted both the modem and router with no change. I reinstalled the linksys router and got a depreciated connection. I restarted the Airport Extreme again and got a full signal throughout the night, morning, through restarts, and when I returned home from work.
    Last evening after using youtube extensively it died again. Linksys would barely work if I switched back, and no matter how many times I restarted I couldn't get the signal to last outside of the area of the router. I left it in the basement overnight shut down, restarted this morning, and had a full signal.
    I'm looking for any potential guesses as to what may be causing the problem. I don't want to replace the card if it's the antenna or sink too much cash into a machine if it's a heat related issue linked to Generation 1 syndrome.
    During all of this the ten year old ibook works fine. I know a lot of macbook pros have issues with their wireless and don't want to sink in the cash if it's more complex than that. Any advice is much appreciated!

    Hi nashie1002,
    If you are having issues connecting to your WPA2 WiFi network after a recent update, you may find the troubleshooting steps and settings in the following articles helpful:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Apple Support: About Wireless Diagnostics
    http://support.apple.com/kb/HT5606
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/ht4199
    It may also be worth doing a search for the specific model number of your router to see if anyone has noted any issues with Mavericks.
    Regards,
    - Brenden

  • Resolution of MacBook Pro display - always this fuzzy??

    I should have done my homework, but...
    I'm very sensitive to the fuzziness of the MacBook Pro display (especially the nearly grey and poorly defined letters on Word) and, to tell the truth, it's making my stomach turn and giving me a headache. I just received this computer through work, can't return it, and I'm stuck with it for three years now. what can I do or purchase to make the display CRYSTAL CLEAR (as in laser print quality)?
    Will an external monitor help? Which one?
    How can my iPod touch look so brilliant and this $2,500 laptop so archaic?
    Thanks for any and all help,
    Ants

    The reason your iPod Touch looks sharper is that it has a much higher pixel density than the MBP. Your iPod's screen is 163 ppi (pixels per inch) versus 110 ppi for the MBP. However, if it looks very fuzzy, I would agree with the other responder that your resolution isn't set to the screen's native resolution (1440 x 900) or that you are zoomed in (press control and scroll down on your mouse scroll wheel or two-fingered scroll on with the trackpad).

  • Using an LCD TV as the Macbook Pro display

    Hey
    I am trying to use a Samsung LCD Tv as the display monitor for my 15 in. Macbook Pro display. I have a DVI cord going from my laptop to a DVI-RGB adapter which is plugged into the LCD Tv monitor, but nothing shows up on the tv and the display is still on the laptop. Any suggestions?
    Thanks

    Assuming your adapter is valid, you try "Detect Displays" in System Prefs/Displays. Some people adjust the OS to show a monitor icon in the menu bar, near the clock, and you can access this from there also. If the Mac still detects no external display, suspect the cabling.
    I really question your DVI-RGB adapter, though. That would be highly unusual - are you sure it's not DVI-SVGA, or DVI-component? Do you have the brand and model? I have run my Samsung TV from my MBP just fine with a SVGA cable and DVI-SVGA adapter.

  • User Contributed Tips in The MacBook Pro Display (Late 2008) forum

    *The following User Contributed Tips are located in the MacBook Pro (Late 2008) > The MacBook Pro Display (Late 2008) forum:*
    None at this time.
    *The following related tips are located in other areas of Apple Discussions:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    See also User Tips Library

    I bought this computer with no disks, upgraded to Lion
    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    for some reason AHT wasn't installed
    AHT is included in system disc #1. 

  • User Contributed Tips in The MacBook Pro Display forum

    *The following User Contributed Tips are located in the MacBook Pro (Original) > The MacBook Pro Display forum:*
    <pending>
    *The following related tips are located in other areas of Apple Discussions:*
    a brody - Using a second Mac as a display for a first
    http://discussions.apple.com/thread.jspa?threadID=1587927
    Publish date: July 7, 2008
    See also User Tips Library

    A cracked screen (LCD) or the glass that covers the LCD? I'm a little confused what is cracked? Is your LCD operating with the crack?

  • How can i wirelessly mirror my macbook pro display to my 2nd gen apple tv?

    Hello,
    I have a new macbook pro 13" and a 2nd Gen Apple TV.  I was wondering if there is an app or a way to wirelessly mirror my macbook pro display to theapple TV without using any HDMI cables/adapters?  Is this something thatcan be done in OSX Lion via Airplay?  I cant find anything about it so iam assuming not but it seems like its something that could easily be done.
    Thanks!

    AirParrot.app
    www.airparrot.com

  • Can't install windondows 8.1 on my macbook pro - format issue

    Can't install windondows 8.1 on my macbook pro - format issue
    Running latest version of Mavericks.
    Followed the exact bootcamp proceduce.
    Have official window 8.1 version on cd.
    All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
    Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
    I have two questions:
    1/ How to start my mac again in normal mavericks mode?
    2/ How can I overcome the windows installation issue?
    Tried already a lot of hints found on the internet.

    First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
    Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

Maybe you are looking for

  • Add vi from earler version to LabVIEW 8.0 Project

    I have a large number of vi's from 7.1 and I need to add them to 8.0 projects. What is the best way to add them rather than create new vi's? 

  • Calculate bandwidth usage

    hi     i m developing live video broadcasting app in fms.. hw to calculate bandwidth usage for each and every user

  • Dirty Volume

    After I used the Mac version of CS3 Bridge's Photo Downloader, I received a log file at the top of all the photos I downloaded. Can anyone tell me what this means and what I should do? Just added: For some reason, I cannot paste the text on this foru

  • Master detail with from clause query

    Hi! I have 2 blocks: master and detail. The master block is based on a from clause query. Since I have to insert, update and delete on this block I have created the on-insert, on-update, on-delete and on-lock triggers (and the respective procedures).

  • Transferring downloaded music from an app to iTunes library

    I have music on a music downloading app that I would like to transfer to my iTunes library, and on the previous iTunes version I could do that, but now iTunes looks all different and I can't figure out how to do it now. Does anyone know how do this?