Macbook pro dock - with ext hd and ext dvd burner and cooling fans needed??

why doesn't anybody make these? I could have a 1 terabyte HD, dvd burner and cooling fans to keep the macbook pro cool enough to touch while playing wow, or editing video. It could also be made of aluminum and look great. Oh and it has to be configurable to allow use of any 15" macbook pro(ie, bookends units are different because new models include firewire 800)

Welcome to Apple Discussions!
Do you have iStatPro? You can download it from the Apple site and see what it is that is running so hot. Under the low usage you describe, the fans should be idling silently. And you might be able to tell what is getting so hot.
If Activity Monitor doesn't show anything, then you might want to run the extended version of the Apple Hardware Test. It sounds like something is getting very hot. If there is a hardware problem, then you should get one or more error codes. The Apple Hardware Test is on Install Disc #1 of the gray discs that came with your Mac--you boot to it by holding down "D". Instructions are on the disc and on the screen.
Also, be sure you have "All Processes" selected on the Activity Monitor. And the boxes at the bottom should be mostly black with very little red or green at 3.5% CPU usage. Given all the symptoms, I am surprised that there is not some process running amok in the background.
Good luck!

Similar Messages

  • After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters

    After some advice, I am new to Apple and looking to purchase either the MacBook Air 13inch with 256GB and 8GB mem or the MacBook Pro 13inch with retina 256Gb and 8GB mem. I am an assistant principal in a primary school and also studying my masters at university. I don't play computer games and I don't watch movies. I do store photos and videos of my kids and music on iTunes. I also like browsing the net with numerous windows open, check email etc. I am really wanting long battery life as I do a lot of my work on the couch - not close to a PowerPoint. Would the air do the trick or will it soon be outdated as Apple move towards retina display? Both air and pro seem very thin  - almost the same? And not much difference in weight either so both very portable which is also a necessary requirement. Just can't help dreaming about that 12 hour claimed battery life. Any helpful advice/opinions, very much appreciated. Thanks

    It's not likely that you'll get 12 hours in reql life. Those benchmarks are set under very strict controlled conditions. Kind of like mileage per gallon claims on cars. If 16GB of ram is an option at all I'd highly recommend you get that. As far as storage 256GB isn't alot, consider storing some things on an external thunderbolt real

  • Macbook Pro Freezes with Screen Distortion and other problems...

    So I've had my 13' Macbook Pro for about 9 months and I am encountering problems with it. My Macbook would sometimes freeze at random and the screen would distort as well, also, the screen would react whenever I would move the laptop around by either reverting back to a normal screen (still frozen) or more distortion which leads me to believe that it might have something to do with the hardware. But all this is temporarily solved when I force shut off my laptop (hold the power button for 3 seconds) and restart it. It can start up again with no problem, but this happens again, more early than usual and becomes more consatnt. However this is lessened whenever I don't use my laptop for an extended amount of time, but it does happens again whenever I do use it for some time.
    Another problem I've been encountering is that, at times after I force shut off the laptop, my computer would not turn back on. Instead, the laptop beeps 3 times, pause, then beep 3 times again. I have looked into this and discovered that this means that I have "No Good Banks"..........I have no idea what this means but I guess it means that I might have faulty RAM.
    What I ask is that if anyone has had similar problems and if they know what to do or what exactly what the problem is so that I might be able to do something about it.
    Info about Macbook:
    Processor 2.5 GHz Intel Core i5
    Memory: 4GB 1600 Mhz DDR3

    Bump. Anyone have any ideas on this?
    I "shut it off" last night, but when I turned it on again tomorrow, it turned out it didn't quite shut down?
    It booted to the grey log-in screen, basically.
    I've also come to the realisation that my charger isn't registered (the LED isn't orange/green like it usually is), and I can't get a "battery status" (I'm sure it has another name, I just don't know what it is) when I click on the little button on the left hand side of the laptop. Usually, it would show green dots/LEDS to tell me how far along it's charged, but now I get nothing.
    I get the distinct feeling something's up with my battery, and maybe my RAM (because of the repeated triple beep after shutting down last night).

  • Macbook pro 13" with After Effects and Twixtor

    Hi
    Can I have an information please..
    For video ful HD, Adobe After Effects is ok on Apple Macbook pro 13" with Intel Core i5 dual-core 2,5GHz and 8GB of ram and Intel HD Graphics 4000 ???
    I want use sometimes, no always... if the rendering time is more long there isn't problem..
    but if the video shooting, tisi is a problem...
    and AE with framework Twixtor for slowmotion... is it ok for macbook 13"?
    look your news... thank you

    thank you so muth for your reply
    and.. my question is:
    Macbook pro 13" with Intel Core i5 dual-core 2,5GHz with Turbo Boost 3,1GHz or max Intel Core i7 dual-core 2,9GHz with Turbo Boost 3,6GHz
    and 8GB of ram and Intel HD Graphics 4000 runs AE just fine ????

  • MacBook Pro hanging with blue screen and spinner after installing Software Update

    Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
    I was wondering what should I do? Do a force restart? Or leave it overnight?
    Also, where can I find any information on what error is causing this issue?
    I appreciate your responses and help.
    By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

    Kappy wrote:
    Force a shutdown. Do not restart yet, but first do the following:
    Repair the Hard Drive
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, boot into Safe Mode then restart normally.
    Hi Kappy,
    Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
    As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

  • Macbook pro 2014 with ASUS PB287Q and SAMSUNG U28D590D

    Hi
    I was wondering if my new macbook pro 15" 2014
    2.5GHz Quad-core Intel Core i7
    16GB 1600MHz DDR3L SDRAM
    512GB Flash Storage
    Intel Iris Pro Graphics+Nvidia GT750m 2GB
    will work with the ASUS PB287Q 4K or the samsung U28D590D?
    I read that if u connect it with HDMI you only get 30Hz, is there a way to get 60Hz with the macbook pro?
    They both have a displayport port.
    Thanks

    I just hooked up my ASUS pb287q and downloaded SwitchResX.  It took some playing around but now I'm getting near perfect retina (2x) resolution.  First choose "Scaled" under the 'display' tab then switch over to SwitchResX and go to the  'current resolution' scroll down to the bottom and select 1280x720, 60hz (HiDPI).  This will give you the retina quality.  It's really big but remember it's twice the resolution of 1280x720. 
    If it's too big for you, you can play around the other resolutions, but this is the setting I would recommend.
    I tested this in Adobe Photoshop CS (uses retina standard) and opened a document that was 2572x5760, it fit perfectly at 100% zoom.
    I'm using a displayport 1.2 and a HDMI 1.4 4k cable.  links provided below. 
    http://www.amazon.com/gp/product/B00F90H77A/ref=oh_aui_detailpage_o03_s00?ie=UTF 8&psc=1
    http://www.amazon.com/gp/product/B00NBGCX00/ref=oh_aui_detailpage_o02_s00?ie=UTF 8&psc=1

  • Energy usage (watt) of MacBook Pro 2010 with 8GB Ram and i7

    I think of buying a MacBook Pro with 8GB, i7
    (and SSD, but that's not important because it consumes less than HDD)
    What is the energy consumption (in Watt) in idle state with display on under
    1) OSX
    2) Win7 (I need this for my job)

    Well, I need a computer professionally. At least now.
    But I want to keep my environments impact at a minimum.
    So I need precise data to evaluate what I do:
    money is one thing, because it's usually very finite,
    but even more important is recyclability, energy, ...:
    10 Watts difference (e.g. for 8GB instead of 4GB?)
    will yield, over mac lifetime of say 10 years (the laptop
    im am currently typing on is 8+ years old, but is slowly
    going towards being obsolete, even with ISA SSD upgrade):
    10 h/d * 365 d/y * 10 W * 10 y = 365000 Wh = 365kWh.
    I try to save energy, so this is approx my direct energy usage
    of 1 year (I have no car, do not fly, have no refrigerator,
    do not heat my appartement above 10 deg Celcius, ...
    but strangely I have a computer and I am a programmer ...).
    For me, it's important. It is relevant for my decisions:
    5 Watts? I will be tempted by 8GB. 10 Watts? I don't know.
    (I do setup work, so I use VMs a lot, so I need quite some
    memory for that ...).

  • New MacBook Pro appearing with Iphoto, Imovie and Iweb all 2008 versions

    I bought a MacBook Pro in March 2013 (new from best buy) and it's running os x 10.8.4. However, for some reason the Iphoto, Imovie and Iweb are all 2008 versions. I used an external hard drive to transfer from my old macbook to the new macbook. What went wrong? Why wasn't the new version of Iphoto, Imovie and Iweb on my computer?
    Should I back up onto my external again and reinstall? I had a lot of trouble transfering the data over in the first place because some security software from my school was messing with the transfer, however once it was deleted everything went smoothly. Thoughts?

    You migrated your files from an older computer. If you migrated apps, iLife applications were transferred, so you have an old iLife edition.
    The only thing you have to do is to open Finder, choose Applications in the sidebar and delete iLife apps. Then, open the App Store, go to Purchases tab and download iLife applications free of charge. All Macs come with iLife applications free of charge

  • HAVE A MACBOOK PRO 2006 WITH NO OPERATING SYSTEM ON IT  WHAT OSX DO I NEED FOR A FRESH INSTALL

    I had to install new hhd and have no luck w/reinstall disc, so I believe I need retail disc does it matter what version of osx I use?

    There were numerous MacBook Pros released in 2006. http://www.everymac.com/systems/apple/macbook_pro/index-macbookpro.html
    The earliest came with OS 10.4.5 installed, but the max is OS 10.6.x.  The last came with OS 10.4.8 installed, but the max is OS 10.7.x.
    If you are able to get the original install discs from Apple, you should probably upgrade to OS 10.6.x or 10.7.x.
     Cheers, Tom

  • Just got a new macbook pro. hooked up my nook and ipod classic. need to get them unhooked. so i can use them on my old pc. how?

    i just got new new Mac pro. I hooked up my nook and my Ipod classic to it. But the library system doesn't recognize the Mac yet and I need to use my old laptop. How do i change these back?

    If you do it correctly you will not lose anything. See this tip: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

  • I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

    i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

    Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
    Power down the system and restart with the drive connected, go to DU and see it it is seen.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • My macbook pro (OS 10.8.5) and iPad air 2 (set to "Airdrop:everyone") cannot connect with each other

    Airdrop does not work between macbook pro & iPad air 2

    From the document I posted above see this:
    System Requirements
    To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
    To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    *The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
    For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.

  • I had to put new HD in macbook, backed up with ext HD with time machine, what doi do now? possible to partition so i have not all the old 'junk' on clean drive?

    i had to put new HD in macbook, backed up with ext HD with time machine, what doi do now? possible to partition so i have not all the old 'junk' on clean drive?

    Do you have the OS 10.6 disk? You can run Disk Utility from that disk and format and partition the new drive.
    If you don't have the disk you can buy it from Apple for $20.00
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    Post back when you are ready to proceed.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Maybe you are looking for

  • Issue on BPM(Business Process Monitoring): Reorganization of old alerts

    Hi BPM Folks, Is there any way for reorganization of old alerts to clean up the system? Because a service desk message(Ticket) is created each time when a job is cancelled. i.e, The number of tickets are created as many times of the same job is cance

  • Reg Check information in table

    Hi Experts, I am developing a Program in account payble(AP), I want to know some field like : <b>Check status field, PO number, Invoice No and Voucher No</b> for that which table i use... Please suggest me, I alredy check PAYR, <b>REGUP,REGUH,BSIS,BS

  • Reg: IDOC to file for PEXR2002

    Hi folks, Here my scnario is once fund transfer happend idoc are generated. I have to pick the generated idocs and transfer to a file. I have done the configuration and design. But after the idoc is generated it is not transfered to XI system how can

  • Ipod screen flashes and chirps ???

    I have a 20GB click wheel Ipod. Last night it just started to make a high pitch sound and then changed to a screen flashing and chirping sound simultaneously? The flashing and chirping continued and I could not do anything. It was basically frozen, t

  • Is there a way to resize graphics to uniform dimensions?

    I have multiple graphics in a FrameMaker 7 document. I'm using Illustrator CS3 to enhance them (adding text, arrows). The problem is, the size they are in Illustrator is not the size they end up as in the document. I save them as .ai files and export