MacBook pro does not recognize built in iSight cam even after restart/ reset

After years of using Sony hdr500 video cam, iMovie stopped recognizing it and then stopped recognizing the built in iSight cam as well. Now photo booth does not see it either. I have restarted the computer to reset SMC and that did not resolve the problem. I would appreciate any help offered. Thanks JJMANN

see http://support.apple.com/kb/HT1151 Check cables, connections, too many devices, etc., suggested there.
If your issue persists, try these steps:
Shut down the computer.
Disconnect all devices and cables except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
With all you have already done, if no USB devices are recognized or work on your Mac after you have also considered all the above, you likely have a hardware problem. Contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
MBP 15" i7 (Early'11) OSX 10.7.3 13" MBP (Mid'09) 2.26GHz OSX 10.7.3

Similar Messages

IMovie 6.0.3 does not recognize built in iSight Camera on new iMac

New iMac, Intel, OS 10.5.4, QT 7.5.
Built in Camera works with Photo Booth, the new iMovie 7.1.3 and iChat.
iMovie HD 6.0.3 or 6.0.4 does not recognize the camera. Opening a new project results in a No Camera Connected error. I have tried selecting various options in the video format drop down when creating a new project. I have repaired permissions, tried it under various users, removed the imovie plist, reinstalled imovie (both 6.0.3 and 6.0.4) without success. All 10 of the new computers are exhibiting this problem.
Any help would be appreciated.

That is not an option that I can select on the imac's. On my iBook under 10.5.4 with iMovie HD 6.0.3 or 6.0.4 I can click on the triangle next to the camera icon and select the built in iSight camera. On the new iMacs that does not work. The built in iSight is not listed as an option.

Since installing Mac OS X Snow Leopard my macBook pro does not allow Adobe Flash plug in even after attempting to download. Any advice what to do? Tks

Hello,
Since installing Mac OS X Snow Leopard on my MacBook Pro, I cannot use Adobe Flash. Each time i attempt to download Adobe i get the same message "blocked plug-in'. Any ideas?
Tks

alisel,
the latest version of Adobe Flash Player that runs on Snow Leopard (or newer versions of OS X) can be downloaded here.
Once you’ve installed it, you might need to check Safari’s Preferences, in the Security tab, to make sure that the “Allow Plug-ins” checkbox is checked.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

Macbook Pro does not recognize ZTE MF823 modem device.

After connecting it to USB it does not show me the new device, looks like the system does not recognize it.
I have OS X 10.7.5
I bought it to use the fast (LTE) intenet in ISP and help desk told me that system restore might help... :/ but i don't like this "might help solution"
I am using other USB modem and it runs on the same USB port, so it's not the port.
Modem works without a problem on Windows XP.
I tried this one:
https://discussions.apple.com/message/15713182#15713182
but no luck...
any ideas?

I have found an error in kernel.log:
Jan 17 20:32:43 MacBook-Pro kernel[0]: USBMSC Identifier (non-unique): MF8230ZTED010000 0x19d2 0x1225 0xf070
Jan 17 20:32:44 MacBook-Pro kernel[0]: ### ZTEUSBMassStorageFilter::iSerialNumber:MF8230ZTED010000 ###
Jan 17 20:32:44 MacBook-Pro kernel[0]: ### ZTEUSBMassStorageFilter::cDeviceConfiguration:(1:1),SendA1:1 ###
Jan 17 20:32:49 MacBook-Pro kernel[0]: ### ZTEUSBMassStorageFilter::Terminated! ###
Jan 17 20:32:49 MacBook-Pro kernel[0]: USBMSC Identifier (non-unique): MF8230ZTED000000 0x19d2 0x1403 0xf070
Jan 17 20:32:50 MacBook-Pro kernel[0]: 0 ff AppleUSBCDCACMControl: configureACM - ACM Control interface has vendor specific protocol
Jan 17 20:32:50 MacBook-Pro kernel[0]: 0 0 AppleUSBCDCACMControl: start - configureACM failed
Jan 17 20:32:51 MacBook-Pro kernel[0]: AppleUSBCDCACMData: Version number - 4.1.22, Input buffers 8, Output buffers 16
Jan 17 20:32:52 MacBook-Pro kernel[0]: AppleUSBCDC: Version number - 4.1.22
but i cannot find the way to solve it...
any ideas?

MacBook Pro using WinXp and Built in iSight camera?

Can't seem to find a thread on this question? Is it possible to use the built in iSight camera on a MacBook Pro while running Win Xp Home SP 2?
Thanks
Dennis Moore

Hi Dennis Moore2,
Does not look like it's working yet. Looks like a driver problem:
http://discussions.apple.com/thread.jspa?messageID=2502129&#2502129
http://discussions.apple.com/thread.jspa?messageID=2160883&#2160883
Good Luck,
John

ITunes does not recognize iPod (3rd gen?) even after trying everything...

I have searched and not found this exact problem on any of the forum pages. My computer (PC) recognizes my iPod as an external USB drive. It is completely charged up (from the AC power). No error messages. Screen shows the "updating - do not disconnect symbol" constantly while docked but the pod does not show up in iTunes at all. I can get the main screen (menu) page by disconnecting the USB device through Windows, but when I try to select any of my data on the pod it shows nothing downloaded on the device. I've tried everything in the support section (most recent version of iTunes, checked that iPod service is running, reinstalled the COM interface for iPod service, deleted and reinstalled iTunes, etc. As a final resort, I "restored" the pod to factory settings using iPod Updater, but no joy...To say I'm unhappy is putting it mildly. Any suggestions before I jump out a window or something????
Pentium III Windows XP

Sorry for the curt/short explanations, but I am very frustrated.
My computer recognizes my iPod. iTunes does not.
iTunes does not recognize my other nano (2gb) or my friends shuffle. However, when my friend's shuffle is plugged into the computer, the iTunes window will pop up though I still can't see the actual device. On my nano and video, iTunes does not pop up.
In response I have...
I have reset my iPod.
*no luck
I have uninstalled an reinstalled the program 5-8x.
*no luck
I have run Spybot and Ad-aware just in case.
*no luck
I have changed the power management on my USB hubs.
*no luck
I have specified and changed the letter pathway of not only my iPod but my other usb peripherals.
*no luck
I have "reinstalled" the COM Interface about 5x after various changes.
*no luck
I have downloaded the recent iPod updater and that dealt with my iPod JUST FINE and then ran iTunes.
*no luck
I have selectively chose the with processes are on the startup.
*no luck
but for good measure, here are the processes running right now:
taskmgr.exe
svchost.exe
firefox.exe
Zboard.exe
qttask.exe
alg.exe
ctfmon.exe
lsass.exe
services.exe
winlogon.exe
csrss.exe
smss.exe
explorer.exe
iPodservice.exe
zboardtray.exe
spoolsv.exe
iTunesHelper.exe
wdfmgr.exe
Programs like Anapod recognize my iPod. They both mount and execute processes just fine.
Can anyone help me here??
hp pavillion zd7360us Windows XP Pro iPod Video 60 GB and iPod Nano 2GB

Macbook Pro does NOT recognize Mic or Xlr-Usb Amp! WHY?

I recently bought an icicle (xlr to usb amp) for my blue spark condenser mic. it clearly states that it is compatible with OSX but it seems my macbook pro contradicts. the mac doesnt recognize the device at all, while in a PC the device is recognized but it reads 'unknown device'. NEED SOLUTIONS.

blueoval50 wrote:
I apologize.....Yes it was iPhoto that opened it. As soon as you said "Finder" I grew a brain and opened the device with Finder. Still kinda new to Mac's. Do you know why it does not show up on my desktop like my desktop did?
Go to Finder>Preferences>General and make sure that all four items are checked. It's considered an external disk. It should show up then.

Macbook Pro Does Not Recognize My Printer

Here is an incredibly naive question from an 18 year veteran of Macs. Until a few days ago my Macbook Pro and MacPro could print from my Brother MFC-7420. The printer prints with no problem from iMac, which the printer is hooked into. Why then when the printer icon pops out of the Macbook Pro dock ready to print does it always say: "Printer Off Line." "Printer is not connected." ? If the printer prints from the iMac, if all the iMac settings are checked with sharing to ensure others can print, if all the connections are solidly locked into place, if I rebooted my internet and Airport Extreme, then why can't I print, as I was doing without a hitch 5 days ago?
Any help is greatly appreciated.

Your Fax machine needs to be tied directly to your land line, if no fax modem interfacing with your Mac, you would have to print the doc, scan it into your HP fax machine to send. This is digital to analog back to digital. Old school.
You can send directly from your Mac, and bypass your HP, many options, here is one:
http://faxzero.com/
You maybe able to glean more from this thread:
https://discussions.apple.com/thread/1840864?tstart=0

My MacBook Pro does not recognize my iPhone 4 when I connect with USB

As the subject line says, when I connect my iPhone 4 to my MacBook Pro via the USB cable, it normaaaally opens iTunes and iPhoto automatically and syncs and imports photos from the phone. But, for some reason, that doesn't happen anymore... Now when I plug in my iPhone with the USB...nothing happens.
The USB still works as a power charger. I even tried a different newer iPhone USB cable from my friend's phone...same problem. I tried both USB ports.
I update my iPhone, my Mac, my itunes, my iphoto...everything. I reset everything at least a couple times. Still no luck!
I did a Disk Utility verify check...it found no problems, the volume 'appears to be ok.'
The iPhone still syncs with iTunes over WiFi, but unfortunately I can't back up my photos from my iPhone wirelessly (I don't have iCloud set up). I want to do it via USB.
Anyone out there with any advice on how to get my computer to recognize my iPhone?
THANK YOU!!!

Ive been struggling with this problem all day, I was trying to upload my pics and videos from my iPhone 4s (version IOS-7) and my computer didn't seem to recognize my phone. Well I finally gave up. My iphone was plugged into my computer via USB, and my iPhoto would not open up automatically like it always had before I updated to IOS-7.
As a last ditch effort I happened to open up my software updates in the apple icon. Lo and behold, once I agreed to update my iTunes app on my mac OSX 10.6.8, it opened my iTunes and a window popped open asking me to click on 'trust this computer'. I did that, and suddenly my iPhoto opened up and filled up with all of my iphone 4s (version IOS 7.1.1) pictures and videos! I could not find an answer anywhere online. I guess the trick is to manually open up iTunes before you attempt to upload pictures/videos from your iPhone into iPhoto.

New MacBook Pro does not recognize time capsule

Just picked up a new 13 inch MabBook Pro. I would like to get my files from my backup which is on a time capsule (my old mac is completely dead). the airport utility would not recognize it at all. it is also my router, so i know the device is working. thanks.

Try with migration assistant.
See http://pondini.org/OSX/MigrateLion.html
On Mavericks manually mount the TC..
In finder use Go, Connect to Server.. and type
AFP://TCname or TCIPaddress.. where you change that for the actual name or IP.

MacBook Pro does not recognize Ethernet cable or connect to wireless

Today when I turned on my computer, it suddenly would not recognize any kind of Internet connection. The Ethernet cable that I use every day now shows up as 'unplugged' even though it is plugged in. I have tried using a different cable, and it still shows up as unplugged. When I try to connect to the Internet wirelessly, there is always a connection timeout and I can't connect. I use a self-assigned IP address and I've never had this problem before. I've also reset my PRAM, but it hasn't helped. Any suggestions?

try suggestion by "KYLEWONT". If you are still unable to connect to internet then issue is either with n/w settings on comp or h/w. You can drag & drop systemconfig folder in MacHD/Library to desktop which contains all settings for network. Restart comp & that should fix problem related to s/w.

Macbook Pro does not recognize any drives on start-up

I was using my Macbook Pro (2012; Mountain Lion) when it froze. I manually shut down the laptop and restarted it. When it restarted, the screen was grey with a flashing folder with a question mark logo. This is the first time this has ever happened.
I tried restarting in Safe Mode (same screen appeared), resetting the PRAM, and rebooting in Recovery mode. In Disk Utility (in Recovery Mode), there are no icons for either Macintosh HD or for Windows (I have a partitioned hard drive). The only icon is for the Macintosh OS X Base.
I have an appointment with the Apple Store (a few days out) but was wondering if I could get any advice until then. Because I cannot access Macintosh HD or Windows, I was wondering if this was a physical issue (loose connector) or a decay of both hard drives.
Thanks.

Bad drive or ribbon cable to the motherboard. Your computer only has one hard drive.

New macbook Pro does not recognize USB memory stick?

So I have google this issue and it seems to me that a lot of people are havign this issue, I already change my setting on my finders preferences and did a few other things that I found on youtube and it still does not work..

use a standard memory stick such as Sandisk

MacBook pro does not recognize built in iSight cam even after restart/ reset

Similar Messages

Maybe you are looking for