Macbook pro does not respond to bluetooth keyboard and mouse at login screen

i've seen this question floating around and i don't think i've found one that has been resolved. i'm hoping someone may have an answer by now.
i do not have this issue when i boot into windows 7 (bootcamp) the macbook pro responds to keyboard input and mouse input immediately on the windows 7 login screen. when i boot into mac, there is no response from either. i've seen suggestions of waiting for 30 secods. i still get nothing after waiting for over a minute.
what i do right now is use the built-in touch pad and keyboard of the macbook pro to get past the login screen. once i'm logged in, i can see that the bluetooth devices are not yet connected (the three dots that go across the bluetooth symbol at the top right of the screen are not yet there). then after a while, maybe about half a minute, the bluetooth keyboard and mouse are connected and i can use them normally.
it is not a big deal but it is very annoying.
i am using a logitech bluetooth mouse (v740) and an adesso bluetooth keyboard (wkb-4000bm). i also tried an azio bluetooth keyboard and had the same issue. all these keyboards are made for mac.
thannks in advance.

just a correction, the keyboard and mouse don't always automatically reconnect once i'm logged in. most of the time i have to go click the bluetooth icon at the top right of my screen, select the mouse and then select "connect". i have to do the same to the keyboard.

Similar Messages

IMac A1311 does not respond to any keyboard or mouse

Hello,
My iMac A1311 does not respond to any keyboard or mouse.
I can restart it. It starts without a problem, but I can't enter my account password or move the cursor.
I have tried using four different keyboards including the original bluetooth keyboard and mouse, an Apple wired keyboard, a generic wired keyboard and a wireless keyboard. I also tried resetting PRAM as well as NVRAM. I even tried to start it in Target Mode and tried to start it with a start-up disk (The disk remained inside the computer). Unfortunately, it all seems to originate with the same problem. The computer does not recognize the mouse or the keyboard. I believe I could rule out a problem with the USB port since the original keyboard/mouse uses Bluetooth.
Any suggestions would be greatly appreciated.
Thanks in advance...

Is this a wake from sleep problem, or after only after a restart?
If it is a 'wake from sleep' issue then since some point in OS X 10.6.x, through 10.7 and 10.8, some users (me included) seem to have the occasional problem with the Mac being unresponsive to any commands from the keyboard/mouse/trackpad, and the issue seems to be something to do with Bluetooth not fully waking from sleep.
The 'fix' that works for me 100% of the time is to go to System Preferences>Energy Saver and set 'computer sleep' to 'never'.
I keep hoping that an OS software update will come up with a 'proper' fix.

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

After updating to Lion my macbook pro does not startup, it is stuck to the grey apple screen

See Here for Troubleshooting Grey Screen on Startup:
http://support.apple.com/kb/TS2570

My MacBook Pro does not respond to keyboard or trackpad. What do I do?

For no reason I can think of, my mid 2012 Macbook Pro (Retina) has stopped responding to its keyboard and trackpad. (USB keyboard and mouse work fine.) According to the Trackpad panel in the system Prefs, no trackpad is found.

If resetting SMC -> http://support.apple.com/kb/HT3964 doesn't help, you may have to take your rMBP to your local Apple Store/AASP for diagnosis.
Clinton

MacBook Pro does not start up. Shuts down after apple logo screen with a loading bar.

I booted my macbook pro up today and i noticed it took a while to do so. i also noticed that the fans were going fast and the macbook was getting hot during the start up process. When i went to the screen i also noticed a loading bar which i havent noticed before when starting up the mac. Once the loading bar has reached the end, the macbook just turns off and the same thing happens over and over. I am on mountain lion

I went to apple today and they told me that the hard drive has unmounted itself. They have my macbook right now and they said they're going to replace the wire that connects the hard drive to the logic board and see if this solves the issue. If it doesn't work they will replace the existing 250GB hard drive in my macbook with a 500GB as they no longer make that size hard drives (cost of £130 for the replacement). The problem is that i dont have my macbook backed up so will there be anyway to get data off the od hard drive?

MacBook pro will not respond to mouse clicks

My MacBook pro will not respond to click of the mouse but the cursor does move.

Hi,
Try installing the trackpad update from apple.
Here is the link.
http://support.apple.com/kb/DL724

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Adobe Lightroom on MacBook Pro does not see my iphoto library

Adobe Lightroom on MacBook Pro does not see my "iphoto library"

Hello.
The problem is that the iPhoto library is inside of iPhoto. Lightroom won't let you select it because it's basically a shortcut to iPhoto. Try exporting the images you need or all of them, depending on what you need.

My Adobe acrobat X Pro does not respond after a minute I open up a pdf file

I recently have installed Adobe Master Suite CS6 Collection. My Adobe acrobat X Pro does not respond after a minute I open up a pdf file. This happens every time when open a new pdf file. My operating system is Windows 7 pro ( Lenovo-64 bits). Any suggestions would be appreciated !!

Mylenium
Thank you for the suggestions.
I checked the WIndows log files. It reported the following error:
The program Acrobat.exe version 10.1.1.33 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 4770
Start Time: 01d0079a09bba381
Termination Time: 13
Application Path: C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\Acrobat.exe
Report Id: 4f145db6-7391-11e4-8fc1-005056c00001
I ran for the memory diagnostics as it showed the error with video card error. My NVDIA graphics card is not working properly. Do you think that could be a problem?I am running on Windows 7 64 bit computer. It also complains about the incompatibility with 64 bits.
Thank you.

Macbook pro does not respond to bluetooth keyboard and mouse at login screen

Similar Messages

Maybe you are looking for