MacBook Pro does not wake up properly

I have a MacBook Pro running OS 10.9. It is docked to a Thunderbolt monitor. Suddenly—probably since the last update from Apple—the computer won't wake up from sleep. In fact, when it goes to sleep it shuts off the two connected hard drives, resulting in messages that I failed to eject the disks before disconnecting.
The laptop wakes up when I lift the lid, but the monitor won't come back up until I first disconnect it from the computer and then reconnect. Apart from the obvious annoyance, opening the computer lid with the monitor shut down resizes and repositions all my open windows.

Stopped using Google Chrome, problem has not occurred again.

Similar Messages

  • MacBook Pro does not wake from sleep in Lion

    A lot of people are reporting that their MBP freezes (which happens to me, too) but this concerns a totally different issue.
    About 5-10% of the time, when I return to my MBP after it has initiated sleep, I cannot get the system to respond.
    Keyboard should wake the MBP. Power button should wake. Opening the lid should wake. None do.
    The system is cold. No fans, to backlight, to nuttin'. All that works is the sleep indicator, which turns on and off when I open and close the lid.
    The only way to use the system is to force restart (hold down power, reboot) at which time the system does its 'resume'-thing... as if it ran out of juice and went into hibernate.
    How do we fix this? I'm running a clean install of Lion (10.7.1) (same issue with 10.7.0) - installed it fresh after formatting the HDD - so Snow Leopard remnants from upgrades cannot be a problem here.

    I began having issues whereby my Macbook Pro would freeze after waking from sleep...whether automatic sleep mode or manually-induced.  Got worse by the day, so I looked in this Forum and found that the problem was widespread..
    My issue came when I tried to open MS Office Mac (Outlook) or open Firefox.  In nearly every instance, the computer (and sometimes the screen) would freeze, sometimes with the little whirling ball remaining on forever.  All these forced me to power down with the on-off button, which was distasteful.
    After reading all the posts in the Mac forums regarding this issue, I determined that the issue most likely to have caused my problem was Microsoft Silverlight.  I recalled that I had recently allowed an update.
    I went into every folder I could find, including those related to MS Office, and sent every incidence of Silverlight (including folders) to the trash.  Then I shut down and restarted the computer, and ran some tests by putting the unit to sleep and waking after a wait time.
    After several tests, I have determined that I am now back in good order, sans Silverlight.  I think Silverlight is off the radar for my future!
    Apple Junior

  • MacBook Pro does not start up properly after yosemite, I see a black screen. What to do?

    Apple MacBook Pro 15 " 2.4iC2D/2x1Gb/160Gb/256V, 07-02-2008, always properly updated.
    Lately Iphoto worked slow and stuck many times. After ugrade from Maverick to Yosemite had to upgrade IPhoto as well.
    After that the laptop started 2 or 3 times, after that it showed me a black screen.
    I succeeded to connect with a firewire cable the laptop to my Mac and could look into the laptop.
    Unfortunately there was a power break, and I don't succeed in reconnecting.
    The laptop stays warm and I hear (I suppose) the hard disk.
    What to do? I want to find my fotos and put them on the Mac.

    I went to apple today and they told me that the hard drive has unmounted itself. They have my macbook right now and they said they're going to replace the wire that connects the hard drive to the logic board and see if this solves the issue. If it doesn't work they will replace the existing 250GB hard drive in my macbook with a 500GB as they no longer make that size hard drives (cost of £130 for the replacement). The problem is that i dont have my macbook backed up so will there be anyway to get data off the od hard drive?

  • MacBook Pro does not start up properly

    Each time I turn on my Macbook Pro, everything will load up to the desktop, I can move the cursor around but cannot click on anything in the dock/menu bar across the top, nor does it respond to any of my hot corner settings. I have to hold down the start button to shut down, wait and then start again and it will always work fine at the second attempt.
    I have had the Macbook Pro just over 6 months now, and have been running Lion since it was launced I think.
    Any suggestions?

    Boot while holding down the command-r keys and that'll boot into the Lion restore disk. Run Repair Disk using Disk Utility.

  • My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

    My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

    I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not.  It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue.   I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that.    I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software.  On a side note this is why I will always be an apple user, Iphones and the like never have this problem

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • MacBook pro does not recognize my WD external hard drive anymore

    I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
    The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

    Does the WD drive show in Disk Utility?
    Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
    1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
    1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
    WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

  • Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro.   The macBook Pro does not have a DVD player it is sold separately.     To install the program can I download a free trial version and then use the serial numb

    Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro.   The macBook Pro does not have a DVD player it is sold separately.     To install the program can I download a free trial version and then use the serial numbers from the set I received?

    yes, that's exactly what you should do,
    Downloads available:
    Suites and Programs:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Adobe Lightroom on MacBook Pro does not see my iphoto library

    Adobe Lightroom on MacBook Pro does not see my "iphoto library"

    Hello.
    The problem is that the iPhoto library is inside of iPhoto. Lightroom won't let you select it because it's basically a shortcut to iPhoto. Try exporting the images you need or all of them, depending on what you need.

  • HT1338 Why macbook pro does not read SanDisk SD ram?

    Why macbook pro does not read SanDisk SD ram?
    I really have problem with that.

    http://support.apple.com/kb/HT3553

  • How do I transfer an iMovie to a dvd if my macbook pro does not have idvd?

    How do I transfer an IMovie to a DVD if my macbook pro does not have IDVD?

    Purchase an external DVD drive or buy the Apple USB SuperDrive.

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • HT3669 My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error"  However, it will print if I directly connect my laptop to this printer via the USB connection.  Any ideas?

    It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

Maybe you are looking for