Macbook Pro doesn't recognize audio cd's after Yosemite upgrade

After completing the upgrade to Yosemite, my Macbook Pro doesn't recognize purchased audio cd's.  Help!!

hi russeel!
when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
okay, we've gone up a
b lot
of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
http://docs.info.apple.com/article.html?artnum=93444
and these resources might be useful:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
keep us posted.
love, b

Similar Messages

  • Macbook Pro doesn't recognize audio interface

    Since Maverick, I have to re-initiate my Mac every time I connect my audio interface (Focusrite Saffire Pro40). The Focusrite control program recognized it, but it is not present as an option in the sound preference. Thanks for the help. Regards,
    Martin

    Go to Utilities > open Audio Midi Setup.
    Then find your Firestudio in the list & right click on it - and select Use this device for sound output. And if you want it to handle your inputs also you should select that as well.
    I would also try unplugging everything & restarting. Then just plug in your audio interface & see if it starts working.

  • Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

    Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

    I don't use FLIP, but if you get no other help here,
    consider the following ideas.
    If neither restarting your Mac
    nor reinstalling OS X fixes your
    problem, you might find some
    help if you search or post in the
    CISCO forum where Flip users post.
    Message was edited by: EZ Jim
    Mac OSX 10.10.1

  • Macbook pro doesn't recognize internal speakers

    my macbook pro  doesn't recognize internal speakers and there is a red light inside the headphone port.  How can I get the speakers working again?

    In addition to what dominc23 suggests, you may try jiggling a toothpick or cocktail stirrer in order to trip the internal switch.  If all fails, the Apple store genius bar is you last resort.
    Ciao.

  • Macbook pro doesn't recognize camera on image capture

    My MacBook Pro doesn't recognize the built-in camera for a lot of my applications, including Image Capture. It doesn't show up anywhere in my system preferences. Any idea why this is so?

    (1)  Mac's built-in camera does not work with Image Capture.
    Image Capture works with external devices like scanners, some iOS devices, some cameras and RAM cards, etc.  Click this link for more info about Image capture and some of the apps that can work with your inbuilt camera.
    Click here for info about how to use Image Capture to transfer images from a connected external camera.
    For more info about Image Capture functions, see Image Capture > Help on your Mac or the Apple pages in this link.
    (2) To test for application-specific problems mentioned in the "How to Troubleshoot iSight " article, use apps like Photo Booth, QuickTime Player, iChat, FaceTime, or others intended to work with your Mac's inbuilt camera.
    (3) To test for user-specific problems mentioned in http://support.apple.com/kb/HT2090 the "How to Troubleshoot iSight " article, you must have more than one user account.  Do NOT use the "Guest" account.  Click this link if you need help creating new accounts for testing.
    Message was edited by: EZ Jim

  • Macbook Pro doesn't recognize iPhone 4Gs

    Macbook Pro doesn't recognize my iPhone 4Gs
    My Macbook Pro 15 (Mac OS X 10.6.8) doesn't recognize my iPhone 4Gs (iOS5.1)
    Suddenly it stopped, last time was April 11 via Wi-Fi.
    Now even with the device plugged it can't be recognized.
    On iPhone Settings, the "iTunes Wi-Fi Sync" tab is grayed.
    Few days ago iPhone started to behave strangely, refusing to power off, sometimes not charging when plugged to USB port, sometimes does.
    Don't know what to do.
    Thanks in advance
    best

    What kind of phone is this? an iphone 4? or an iphone 4S? ( note there is no such phone as an iPhone 4gS)
    What you describe here is in my eyes the beginning signs of accidental damge, such as water damge of some sort.
    This is a great oppurtunity to see if the same issues you are having when connecting to your computer, replicate when conencted to another computer.
    You need to find out if there is a way to test with a new USB cord if possible to rule that out.
    Trying to isolate this to, or away from the iphone.

  • HT5172 My new Macbook Pro doesn't recognize my card reader (with a CF card inserted).

    My new Macbook Pro doesn't recognize my USB card reader with a CF card inserted.  It works fine on my old Macbook Pro.
    Do I need a new card reader?  USB 3 perhaps?
    I would appreciate any input that you may have.  Thank you.

    Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

  • MacBook Pro won't recognize Canon MP800, even after reloading print drivers

    Time Warner Cable updated servers. We had to update the DNS address for the MacBook Pro to maintain internet access. After doing this MacBook Pro doesn't recognize the Canon MP800 printer - shows no print drivers for Canon IJ Network , even after reinstalling printer software and downloading print drivers from Canon website - MPNavigator 2.0 keeps saying print driver has not installed. The MacBook is wirelessly networked with the printer and an EMac. We haven't updated the DNS address for the EMac because it still recognizes the printer and prints; however, we now don't have internet access with EMac as a result.

    If printing wirelessly check your printer sharing settings - System Preferences/Sharing
    If printer is connected directly to your computer, check your printer connections, read the troubleshooting section in your printer manual and check the printer manufacturer website for drivers you may need to update.

  • Macbook Pro doesn't recognize DVD

    My MacBook Pro doesn't read some DVD's! I'm trying to install my camera's software, but the drive doesn't read the DVD! It just make some odd noises and then ejects the disc. However, it can still read discs I burned on my other Mac and it recognizes blank CD's and DVD's! Is anyone going through the same issue?

    It's the DVD for Mac. And I'm having the same problem with other DVDs. The drive just recognize blank discs and discs burned on other macs.

  • MacBook Pro doesn't recognize iPhone when USB connected

    I have a MacBook Pro, an iPod, and an iPhone.  Using the same usb port and cable I have the following situation.  The MacBook Pro recognizes both other devises in iTunes through the internet.  The MacBook Pro does not recognize the iPhone 5 when connected by cable but does recognize the iPod.  Because of this I can't transfer photos from the iPhone to the MacBook Pro.  When connected the iPod shows it is charging but the iPhone 5 does not.  Using the same cable connected to the wall charger both devices show they are charging.  Does anyone have a suggestion?  Thank you.

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try           
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • ITunes doesn't recognize audio CD's after upgrading to 6.0

    I have just upgraded to iTunes version 6.0 and now it doesn't recognize audio CD's when I put them in the CD drive. iTunes no longer lists the name of the CD and the song name on each track.
    Can anyone offer help?
    Thanks
    Marcia

    hi russeel!
    when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
    okay, we've gone up a
    b lot
    of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
    http://docs.info.apple.com/article.html?artnum=93444
    and these resources might be useful:
    http://docs.info.apple.com/article.html?artnum=300252
    toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
    keep us posted.
    love, b

  • Macbook Pro doesn't recognize my fast track pro c400

    Hello I am using Fast track pro c400 from M-audio.
    When I use the fast track pro c400 it works.
    However, when I disconnect it from my Macbook Pro and reconnects it,
    MIDI setting recognizes it again but this time with out any available input and output.
    So when I use mainstage or garageband, it recognizes that there is 1 midi input but
    when I go to setting it doesn't uses fast track pro's input, output instead, it uses built in I/O.
    So i tried to reinstall my driver and when I did it, it worked again for few time and
    same problem occured.

    okay, I had connected my MBP to the base station and managed to restore the base station to factory settings. So, my MBP recognized the base station, although there's something weird about it.. you know how when you open the airport utility, on the left hand column, usually there should be a picture of your airport extreme with the name below it, right? Mine doesn't show any picture except the orange dot and my base station name.
    In addition, my MBP airport is able to pick up my recently-made network, but unable to join the network. Again, when I opened the AirPort utility, it can't detect my airport extreme wirelessly.
    I have tried every method that I can think of, but my MBP won't recognize the airport extreme anymore, wirelessly.
    Please tell me what should I do?

  • Macbook Pro doesn't recognize TV

    I have recent;y purchased my Macbook Pro and and trying to ensure it can do what my Windows laptop could do. In trying to connect to a TV, I purchased a mini display port to HDMI Adapter (Rocketfish.) I successfully connected my Macbook with LCD TVS within my home but when I try to connect to my Mitsubishi WD-65833 65" Diamond Series 1080p rear-projection DLP HDTV nothing happnes. I have tested all three HDMI inputs which work with other items but the Macbook doesn't ween to recognize I am connected to this TV like it does with my other TVs.
    Any ideas?
    I really want to confirm this laptop will replace my windows laptop

    have you set up home sharing on your devices ?
    iOS: Setting up Home Sharing on your device

  • MacBook Pro doesn't recognize JVC camcorder GR-X5E

    Hello
    Does somebody know any kind of "adapter" for MacBook Pro with OS X 10.5.8 that makes the signals of my JVC camcorder GR-X5E readable?
    jvc.ch doesn't has a solution
    Thank's in advance!

    I only used the USB cable to connect camera and MacBook, opened iMovie and waited until the icon would appear. It didn't. Also on the desktop nothing happend.
    Therefore I asked jvc.ch and they said, that there was no possibility...

  • New MacBook Pro doesn't recognize camera

    I just upgraded from my old G4 PowerBook (with iLife 08) to a new MacBook Pro (with iLife 09). I have two cameras, a Nikon D60 and a Casio Exilim Z850. The new MacBook Pro and iPhoto 09 have no problem recognizing the D60... however, the Casio isn't recognized by the new computer/software; all I get is the infinite spinning beachball. My old G4 PowerBook / iPhoto 08 still recognizes the Casio just fine... however, I'm not planning on keeping the G4 PowerBook for much longer; the MacBook Pro was intended to be a replacement. Now I'm just trying to figure out if there's any way to get the new computer to communicate with the Casio. Granted, the D60 is a much nicer camera... but sometimes all you need is a good point-and-shoot that fits easily in your pocket, so I'd like to be able to keep the Z850 if I can find a way to get the new computer to recognize it. Any thoughts?

    Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

Maybe you are looking for

  • Dynamic FileName generation

    Hi, I have a source idoc xml file and the target structure has only 2 fields. Mapping contains only 2 fields which is used from the idoc and put to the fields in the target strucuture. After transformation, I need to create a file with the filename i

  • Apple Hardware test error, what next?

    Hi there, I was hoping someone might be able to give me some insight into the error I found today while running the apple hardware test. It was my first time running it (I've had my MBP since August, but just heard about the test on the forums, so I

  • " Path not found() "error when implementing single sign on

    Hi, We are implementing single sign on so that when users click on the "Reports Login" he is navigated to the obiee presentation services screen. For the reports login we have a .asp page which directs to the presentation services. I have done the ne

  • Iw22 long text issue

    hi, I am facing a strange issue in long text creation and saving in iw22 that whenever i am changing the long text or adding any line with the existing long text it is showing the reported by field's id of iw22 in long text user id place. In spro the

  • Why the Colour changes in AI ???

    My friend had a PDF file created in AI. She gave me the PDF file only. I open the file with AI in order to do minor editing but when I copy this file and paste into a new AI document, the colour changes (it becomes darker) even both documents are in