Macbook Pro doesn't recognize my fast track pro c400

Hello I am using Fast track pro c400 from M-audio.
When I use the fast track pro c400 it works.
However, when I disconnect it from my Macbook Pro and reconnects it,
MIDI setting recognizes it again but this time with out any available input and output.
So when I use mainstage or garageband, it recognizes that there is 1 midi input but
when I go to setting it doesn't uses fast track pro's input, output instead, it uses built in I/O.
So i tried to reinstall my driver and when I did it, it worked again for few time and
same problem occured.

okay, I had connected my MBP to the base station and managed to restore the base station to factory settings. So, my MBP recognized the base station, although there's something weird about it.. you know how when you open the airport utility, on the left hand column, usually there should be a picture of your airport extreme with the name below it, right? Mine doesn't show any picture except the orange dot and my base station name.
In addition, my MBP airport is able to pick up my recently-made network, but unable to join the network. Again, when I opened the AirPort utility, it can't detect my airport extreme wirelessly.
I have tried every method that I can think of, but my MBP won't recognize the airport extreme anymore, wirelessly.
Please tell me what should I do?

Similar Messages

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

M-Audio Fast Track Pro doesn't work with OS X Mavericks Garageband or MainStage 3

I used to be able to use MainStage 3 and Garageband with my M-Audio FastTrack Pro with no problem. Then, when I upgraded to OS X.9 Mavericks, it doesn't work. Avid (who now supports the FastTrack Pro) recently came out with an updated driver that supposedly upgrades for OS X.9 Mavericks (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers), but even after downloading/installing the driver and updating the device, I still can't get it to work with Garageband or Main Stage 3.
It seems that the software sees the M-Audio FastTrack Pro USB, I even see an audio signal in both MainStage 3 and Garageband for my guitar or microphone input, but there is no output sound from the FastTrack Pro to my PA system other than the analog sound (no sim amps or vocal effects work).
Anybody been able to solve this problem?

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

Macbook Pro doesn't recognize audio cd's after Yosemite upgrade

After completing the upgrade to Yosemite, my Macbook Pro doesn't recognize purchased audio cd's. Help!!

hi russeel!
when i first upgraded to 5.0.1.4 i panicked for a while looking for that tab (and the Burning one) ... the subtab that i find kind of strange is "Advanced-General". Generally Advanced? Not Tremendously Advanced?
okay, we've gone up a
b lot
of versions in your case (nearly as many as it is possible to go), so we'd probably better check through some of the usual suspects. let's start off with this document:
http://docs.info.apple.com/article.html?artnum=93444
and these resources might be useful:
http://docs.info.apple.com/article.html?artnum=300252
toonz, "Where to find firmware for your CD/DVD drive", 05:55pm Apr 15, 2005 CDT
keep us posted.
love, b

Macbook Pro doesn't recognize Flip Mino camera in USB port after Yosemite upgrade

Since I upgraded to Yosemite, my Macbook Pro doesn't recognize my Flip Mino camera in the USB port.

I don't use FLIP, but if you get no other help here,
consider the following ideas.
If neither restarting your Mac
nor reinstalling OS X fixes your
problem, you might find some
help if you search or post in the
CISCO forum where Flip users post.
Message was edited by: EZ Jim
Mac OSX 10.10.1

Macbook pro doesn't recognize internal speakers

my macbook pro doesn't recognize internal speakers and there is a red light inside the headphone port. How can I get the speakers working again?

In addition to what dominc23 suggests, you may try jiggling a toothpick or cocktail stirrer in order to trip the internal switch. If all fails, the Apple store genius bar is you last resort.
Ciao.

Macbook pro doesn't recognize camera on image capture

My MacBook Pro doesn't recognize the built-in camera for a lot of my applications, including Image Capture. It doesn't show up anywhere in my system preferences. Any idea why this is so?

(1) Mac's built-in camera does not work with Image Capture.
Image Capture works with external devices like scanners, some iOS devices, some cameras and RAM cards, etc. Click this link for more info about Image capture and some of the apps that can work with your inbuilt camera.
Click here for info about how to use Image Capture to transfer images from a connected external camera.
For more info about Image Capture functions, see Image Capture > Help on your Mac or the Apple pages in this link.
(2) To test for application-specific problems mentioned in the "How to Troubleshoot iSight " article, use apps like Photo Booth, QuickTime Player, iChat, FaceTime, or others intended to work with your Mac's inbuilt camera.
(3) To test for user-specific problems mentioned in http://support.apple.com/kb/HT2090 the "How to Troubleshoot iSight " article, you must have more than one user account. Do NOT use the "Guest" account. Click this link if you need help creating new accounts for testing.
Message was edited by: EZ Jim

Macbook Pro doesn't recognize iPhone 4Gs

Macbook Pro doesn't recognize my iPhone 4Gs
My Macbook Pro 15 (Mac OS X 10.6.8) doesn't recognize my iPhone 4Gs (iOS5.1)
Suddenly it stopped, last time was April 11 via Wi-Fi.
Now even with the device plugged it can't be recognized.
On iPhone Settings, the "iTunes Wi-Fi Sync" tab is grayed.
Few days ago iPhone started to behave strangely, refusing to power off, sometimes not charging when plugged to USB port, sometimes does.
Don't know what to do.
Thanks in advance
best

What kind of phone is this? an iphone 4? or an iphone 4S? ( note there is no such phone as an iPhone 4gS)
What you describe here is in my eyes the beginning signs of accidental damge, such as water damge of some sort.
This is a great oppurtunity to see if the same issues you are having when connecting to your computer, replicate when conencted to another computer.
You need to find out if there is a way to test with a new USB cord if possible to rule that out.
Trying to isolate this to, or away from the iphone.

M-audio fast track pro doesn't work anymore

Today I plugged in my M-Audio Fast Track Pro which worked fine few weeks before, but now it doesn't work anymore. It shows up everywhere fine but I can't play any music. The videos on Youtube can't be played at all when I have selected this soundcard as output. Same every other application like iTunes. I have reinstalled the drivers, rebooted my mac but nothing helped so far. Does anyone know how to solve this problem? Thanks.

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

HT5172 My new Macbook Pro doesn't recognize my card reader (with a CF card inserted).

My new Macbook Pro doesn't recognize my USB card reader with a CF card inserted. It works fine on my old Macbook Pro.
Do I need a new card reader? USB 3 perhaps?
I would appreciate any input that you may have. Thank you.

Hi, closereaching. Instead of spending 12 hours reinstalling your operating system and getting everything back up to date again, which probably won't accomplish anything, why not buy a $10 USB card reader for your Casio's SD card? Or (more expensive, but a much more elegant solution), an ExpressCard SD card reader that can stay in your computer all the time?

Mac mini does not recognize M-Audio Fast Track Pro device.

I recently installed M-Audio Fast Track Pro with the latest driver for (10.9.2). I'm running the OSX mavericks 10.9.2. The installation succeed but once i connected the device and turn it on, my mac does not recognized it and it shows "device not connected" at the system preferences under the M-Audio fast track icon. i tried reinstalled the driver, tried the checking audio midi setup setting (which is still undetected) and tried installed it at my friend's pc (the device works fine).
Please help me.

See:
http://community.m-audio.com/m-audio/topics/os_x_mavericks_fast_track_pro_suppor t

BIG PROBLEM BETWEEN PREMIERE PRO CS6 and FAST TRACK PRO

Hi there...im running premiere pro cs6 on macbook pro 2010 with 8 gb of ram...im editing a project of hd material from a canon 5d..i got all the sound from an external recorder, all the sound is already syncronized... i need to do some cleaning on it....i got an USB fast track pro from M-audio that work well....
the problem is this : every time i have to send a clip to another aplication for the cleaning of the sound( audition with dynamic link or soundtrack pro exporting a .wav file) after a while (it can be a couple of minutes or more) i listene a clic on my headphones and the sound goes back to the speakers of the macbook pro, after that i must reconfigure again the audio hardware and audio output mapping again ( this happen almost with every clip and only between audition and premiere) anyway i started to use soundtrack pro to avoid this problem... but what is happening now is that many times after i listen the clic on the headphones or after im tryng to go back from one audio application to premiere, premiere freeze out or shhot down....
the poject is kind of big and restart premiere 3 or 4 times in an hour of job in my mac book pro its not what i call a productive hour oj job...
somebody have the same issue??
please let me know becouse im starting to get really mad...
anyway ill post also in the m- audio website to check it out over there
thanks in advance

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Using Outboard Gear With M-Audio Fast Track Pro And Logic Express

My Fast Track Pro has 2 insert jacks on the back where you can run a send and return to use outboard gear. The cable you use has 2 female 1/4" jacks (one is send and the other is return) that go to a 1/4" male jack that you plug into the back of the interface.
My question is this:
How can I get Logic Express to send a track through the outboard gear connected to my interface? On the track's output settings in Logic there are "Output 1+2", which run to my monitors I think, and "Output 3+4", which don't have anything plugged into them. There don't appear to be any other options for sending the track. How can I get Logic to recognize the Inserts jack on the Fast Track Pro? I'm running all the latest drivers if that means anything. Any help is much appreciated.

Thanks for helping me on this. I'm still a bit confused on how to send the channel through the insert. The jacks on the back of my interface are "TRS Output 1+2" (my monitors are plugged into these outputs), a RCA "Output 1,2,3, and 4", an S/PDIF out and in, and then 2 TRS inserts jacks, marked 1 and 2. Each jack does it's own separate send and return which is why I had to buy the cable with the 2 female jacks on it.
I've been able to use the I/O plugin and get the track to accept a signal from the insert on input 1 (I have a looping pedal running in the send chain and was able to get it to play a loop over top of the audio already recorded on the channel), but am unable to send the recorded track through the fx send. What would I need to set the output to to be able to do this? Thanks for your time.

Adobe Audition with M-Audio Fast Track Pro mic input

I must be missing a setting somewhere. I have two mics going into the M-Audio Fast Track Pro (XLR inputs). Mic 1 works fine but no input from Mic 2 although I have audio coming through my headsets when speaking into Mic 2 - it just doesn't register in Adobe Audition. I have switched mics and cables and all are fine. The issue is with Mic 2.
Again, Mic 1 is working fine and Mic 2 is picking up audio and feeding to my headphones but not to Adobe Audition. I have all the latest drivers installed.
I am on a Win7 (32bit) system. Microphones are Shure PG-42's (phantom powered condenser microphones).
I contacted M-Audio support and phone-verified that all Fast Track Pro settings were proper. Seems to be a setting or driver issue in Audition. I've spent hours trouble-shooting to no avail. In the meantime, I'm using a Y-splitter running both mics into Mic Input 1 on the Fast Track Pro which works fine but I really need seperate control over each microphone. I have interviews coming up soon and would like to find a resolution quickly. Can anyone help? Thanks!

Archie! Good stuff! I'm almost there...
I've got my Adobe Audition set up with the settings you gave me - everything is armed and good-to-go... but then...
When I hit record Tracks one and two look like they're recording but there is no level (no audio) going into the tracks.
If I go back to the Edit view and try to record the entire fills with green as if I'm filling it 100% with sound. This has never happened before.
I suspect I've got something hosed-up in my "Audio Hardware Setup" under the Edit section.
My selections for Audio Driver Setup are:
1) M-Audio USB ASIO
2) ASIOforALLv2
3) Audition 3.0 Windows Sound
If you could give me some direction as to the settings in "Audio Harware Setup" I feel I've almost got it.
Thanks!

CAD GXL2200, M-Audio Fast Track Pro, Garageband '11

Hello,
I am running a MacBook Pro Early 2011, with Garageband '11 hooked up to a M-Audio Fast Track Pro with +48v Phantom Power turned on running to a CAD GXL2200 Gold Diaphragm Condenser Mic. When I hook this all up, I make a new Real Instrument Tack on Garageband and select the second input for the M-Audio and choose to monitor. When i attempt to record from the Mic, i get no input. What settings do i need to have on my M-Audio or Garageband?

Are you plugged into input 2 on the fast track?
Is the track record enabled?
Have you tried tried the pad or inst/line buttons on the fast track?

Macbook Pro doesn't recognize my fast track pro c400

Similar Messages

Maybe you are looking for