MacBook Pro doesn't respond to power button

My 15-inch MacBook Pro 2.6 GHz Intel Core i7 with 16GB RAM and running OS 10.9.4,  (just purchased earlier this year) does not respond to the power button correctly anymore. When I press the power button, I used to get a dialog box where I could put it to sleep, restart, or shutdown. Nothing happens anymore. If I hold down the power button, it does respond to that and goes to sleep. And of course the power button works to turn on the computer if the computer is off.
I have reset the PRAM and the power management system.
Any thoughts as to why I can't shut down my computer with the power button?

Wow, that was a fast response. Thank you so much. Before I reset everything though, this is not how it was working. It was putting it to sleep when I held the power button for two seconds. Now, which I did not try holding the power button after I reset everything, just tried pressing it once, I get the dialog box when I hold it for two seconds. The one thing that is still not working though that this article states is that when I press the power button once, it does not put the computer to sleep, it does nothing. But at least I get the dialog box now if I hold it for two seconds. Thanks!

Similar Messages

  • MacBook Pro won't respond to power button.

    Macbook Pro 13" (late 2011) OSX Mountain Lion
    Hi
    This is not my first Macbook, I have another 15" that had a similar problem, and I just fixed it by resetting the SMC. However this 13" is different. I was just using it normally, until the notifaction for low battery popped up, and so I just plugged in my charger, put it to sleep, and went on doing other things. When I came back after 2 hours, I noticed that my Magsafe charger is showing a blinking green light. At that point I try to wake my computer, and it wont wake up. (the sleep led is not on either) Afterwards, I try turning it on, but I had no luck. At that point I try resetting the SMC, but days before this, My shift button was unresponsive, and I took it to apple. I schedule a repair by the end of the week. They told me that nothing else was wrong. I mean, I'm going to take it to apple on saturaday, But I need it for work for 1 last day. I was wondering if there was any quick fix, or if anyone know what is the problem with it.
    I also noticed that when I plug in my other magsafe charger, I get a blinking red led instead. Also the battery level led is not responsive as well.
    Can anyone help me?
    Thanks in advance
    Mat

    Have you checked the battery status in System Information>Hardware>Power>Battery Information?  What does it say regarding Condition?
    This is from my MBP:
    Ciao.

  • Macbook pro not opening when press power button

    my mac book pro not opening when press power button even battery is full.

    I already tried with the Battery in and without but no luck. I'm sure it's not that kind of problem unfortunally

  • Macbook Pro not starting without Holding Power Button

    Hello,
    my Macbook Pro (bought March 2008) seems to be dead.
    When the power button is pressed (and ONLY IF HELD.. cause if I just push it once it powers up and turns off instantly) it starts and does 2 seconds of normal boot (DVD drive check, HD starts to spin along with the fans) then the power just cuts out and you hear the HD off sound. The LED on the front at this moment keeps flashing and then all goes off.
    I tried doing a SMC reset and even a PRAM reset already, but no luck. I've read to try an Hardware Test with the Install DvD so I've inserted it but the MacbookPro powers off before even starting it (The Screen never starts )
    What should I do?
    Thanks for your help :-S

    I already tried with the Battery in and without but no luck. I'm sure it's not that kind of problem unfortunally

  • MacBook Pro 13" unibody mid 2012 power button not working!

    My macBook won't start (or shut off) by pressing power button. It does however start if I connect maglock, I've troubleshooted and am all out of ideas.

    Is it under Applecare? If so, just take it in and let them fix it for you. The only other thing I can think to try is an SMC reset, though I don't hold much hope for that as a fix. Use the option "for a battery you should not remove yourself"
    http://support.apple.com/kb/ht3964

  • HT3205 My MacBook pro doesn't have any power. The charger light is green and the little lights along the side are green for a few seconds then fade.  Any advice?

    Well it won't turn on despite the indicator lights all being green showing it has power!

    Troubleshooting a MacBook, MacBook Air or MacBook Pro that won't turn on

  • MacBook Pro crashes when I press power button to shut down

    Installed Lion (10.7.2) on a 2010 MBP yesterday; had to replace the hard drive as it failed the SMART test. Everything seems to be working fine until I press the power button to shut the computer down. It freezes solid every single time. I have to then hold the power button down for 10 seconds so it restarts.
    Anyone else with that issue?

    I reset the PRAM/NVRAM which, incidentally, is different than it used to be. No more chimes; instead a screen which allows you to run Disk Utility, which I did. Also repaired permissions.
    I reset the SMC which I thought would solve the problem considering the power button is managed by it. No luck.
    I've disabled the tablet extension because I'd seen an error mentioning it somewhere and I've updated Growl to 1.2.2 although not the new Lion-friendly 1.3 because people seem to have a lot of trouble with it. Still, it's an option.
    Here are some "error" related lines from the System Diagnostic Report. Both reports are called mds_2011-10-18_(sixdigits)_localhost.crash
    Crashed Thread:  2  Dispatch queue: com.apple.metadata.spotlightindex
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000bad
    VM Regions Near 0xbad:
    -->
        __TEXT                 0000000105162000-000000010526f000 [ 1076K] r-x/rwx SM=COW  /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mds
    Application Specific Information:
    [0x10a243000]/SourceCache/Spotlight/Spotlight-627.20/core-db/log-db/ldb.c:237: failed assertion 'val' /.Spotlight-V100/Store-V2/2B0E3327-BEC2-43B8-B41E-83DF2386BA37 (hfs, t: 0x11, st: 0x1, f: 0x480d000) 
    [0x10a2c6000](Error) IndexPath in openReverseStore:Successfully recovered from shadow with state d00d0dd0
    Initializing
    objc[243]: garbage collection is OFF
    ~snip~
    Thread 2 Crashed:: Dispatch queue: com.apple.metadata.spotlightindex
    0   com.apple.spotlight.index               0x000000010548ea26 getDBFForUniquedValue + 44
    1   com.apple.spotlight.index               0x000000010548f169 inflateDBO2 + 1494
    2   com.apple.spotlight.index               0x000000010549a059 db2_get_obj_callback + 617
    3   com.apple.spotlight.index               0x000000010537a804 si_remapForIndex + 133
    4   com.apple.spotlight.index               0x0000000105388daf InnerMerge + 2991
    5   com.apple.spotlight.index               0x0000000105389272 OuterMerge + 1021
    6   com.apple.spotlight.index               0x000000010537982a si_mergeIndex + 3552
    7   com.apple.spotlight.index               0x000000010537aa96 runLoop + 54
    8   com.apple.spotlight.index               0x000000010538dc17 work_fun + 746
    9   libdispatch.dylib                       0x000000010668a10a _dispatch_queue_drain + 264
    10  libdispatch.dylib                       0x0000000106689f66 _dispatch_queue_invoke + 54
    11  libdispatch.dylib                       0x000000010668a0d4 _dispatch_queue_drain + 210
    12  libdispatch.dylib                       0x0000000106689f66 _dispatch_queue_invoke + 54
    13  libdispatch.dylib                       0x000000010668a0d4 _dispatch_queue_drain + 210
    14  libdispatch.dylib                       0x0000000106689f66 _dispatch_queue_invoke + 54
    15  libdispatch.dylib                       0x0000000106689760 _dispatch_worker_thread2 + 198
    16  libsystem_c.dylib                       0x000000010675a3da _pthread_wqthread + 316
    17  libsystem_c.dylib                       0x000000010675bb85 start_wqthread + 13
    ~snip~
    Thread 2 crashed with X86 Thread State (64-bit):
      rax: 0x0e728f25bcd2a170  rbx: 0x0000000000000003  rcx: 0x00000000000213b0  rdx: 0x00007ff5226990e0
      rdi: 0x000000010a0dde00  rsi: 0x00007ff522600000  rbp: 0x000000010a240ff0  rsp: 0x000000010a240fe0
       r8: 0x000000000000000e   r9: 0x00007ff522696fe0  r10: 0x0000000078e0b3b5  r11: 0x0000000018c32a40
      r12: 0x000000000000000f  r13: 0x000000010a2411c0  r14: 0x0000000000000015  r15: 0x00007ff52300e430
      rip: 0x000000010548ea26  rfl: 0x0000000000010202  cr2: 0x0000000000000bad
    From another report:
    Crashed Thread:  5  Dispatch queue: com.apple.metadata.spotlightindex
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000bad
    VM Regions Near 0xbad:
    -->
        __TEXT                 000000010f880000-000000010f98d000 [ 1076K] r-x/rwx SM=COW  /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mds
    Application Specific Information:
    [0x114924000]/SourceCache/Spotlight/Spotlight-627.20/core-db/log-db/ldb.c:237: failed assertion 'val' /.Spotlight-V100/Store-V2/2B0E3327-BEC2-43B8-B41E-83DF2386BA37 (hfs, t: 0x11, st: 0x1, f: 0x480d000) 
    [0x1149a7000](Error) IndexPath in openReverseStore:Successfully recovered from shadow with state d00d0dd0
    Initializing
    objc[61]: garbage collection is OFF
    ~snip~
    Thread 5 Crashed:: Dispatch queue: com.apple.metadata.spotlightindex
    0   com.apple.spotlight.index               0x000000010fbafa26 getDBFForUniquedValue + 44
    1   com.apple.spotlight.index               0x000000010fbb0169 inflateDBO2 + 1494
    2   com.apple.spotlight.index               0x000000010fbbb059 db2_get_obj_callback + 617
    3   com.apple.spotlight.index               0x000000010fa9b804 si_remapForIndex + 133
    4   com.apple.spotlight.index               0x000000010faa9daf InnerMerge + 2991
    5   com.apple.spotlight.index               0x000000010faaa272 OuterMerge + 1021
    6   com.apple.spotlight.index               0x000000010fa9a82a si_mergeIndex + 3552
    7   com.apple.spotlight.index               0x000000010fa9ba96 runLoop + 54
    8   com.apple.spotlight.index               0x000000010faaec17 work_fun + 746
    9   libdispatch.dylib                       0x0000000110d9f10a _dispatch_queue_drain + 264
    10  libdispatch.dylib                       0x0000000110d9ef66 _dispatch_queue_invoke + 54
    11  libdispatch.dylib                       0x0000000110d9f0d4 _dispatch_queue_drain + 210
    12  libdispatch.dylib                       0x0000000110d9ef66 _dispatch_queue_invoke + 54
    13  libdispatch.dylib                       0x0000000110d9f0d4 _dispatch_queue_drain + 210
    14  libdispatch.dylib                       0x0000000110d9ef66 _dispatch_queue_invoke + 54
    15  libdispatch.dylib                       0x0000000110d9e760 _dispatch_worker_thread2 + 198
    16  libsystem_c.dylib                       0x0000000110e693da _pthread_wqthread + 316
    17  libsystem_c.dylib                       0x0000000110e6ab85 start_wqthread + 13
    ~snip~
    Thread 5 crashed with X86 Thread State (64-bit):
      rax: 0xf8f96330d263d9d4  rbx: 0x0000000000000003  rcx: 0x0000000000016570  rdx: 0x00007fbe82e14870
      rdi: 0x00000001147bee00  rsi: 0x00007fbe82e00000  rbp: 0x0000000114921ff0  rsp: 0x0000000114921fe0
       r8: 0x000000000000000d   r9: 0x0000000000000000  r10: 0x00000000a9c7612d  r11: 0x00000000ffffff7f
      r12: 0x000000000000000f  r13: 0x00000001149221c0  r14: 0x0000000000000015  r15: 0x00007fbe83929c30
      rip: 0x000000010fbafa26  rfl: 0x0000000000010202  cr2: 0x0000000000000bad
    As for the System.log, lines with the word "crash" in it:
    a lot of: com.apple.launchd.peruser.501[121] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    and: com.apple.dock.extra[154]: 2011-10-14 09:26:47.693 com.apple.dock.extra[154:1707] Could not connect the action buttonPressed: to target of class NSApplication
    ReportCrash[556]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled
    com.apple.dock.extra[563]: Could not connect the action buttonPressed: to target of class NSApplication
    Oct 16 10:23:01 mikes-mbp loginwindow[433]: DEAD_PROCESS: 433 console
    a lot of these: com.apple.dock.extra[142]: 2011-10-18 20:23:44.979 com.apple.dock.extra[142:1707] Could not connect the action buttonPressed: to target of class NSApplication
    There's tons of stuff here. Hopefully, something up there makes sense. At the end of the day, everything works, except shutting down the computer with the power button. I'm trying to use menus but it's a hard habit to break.

  • MacBook Pro will not wake, holding power button does not shut it down either

    My mbpro will not wake and even holding down the power button will not shut it down. Any ideas?  Thanks.

    You can force quit a shut down by holding the power button for a extended amount, say ~10 sec or so.
    The try resetting the  SMC http://support.apple.com/kb/ht3964

  • Mac book pro won't respond to power button

    Lap top was working fine and it went to sleep and then would not wake up. The light on the left is working like normal but can't restart or turn off. The power button is none responsive. I removed the battery and then reinstalled and nothing.  Any thoughts. And of course my apple care just expired last month go figure.

    my apple care just expired last month
    Call Apple Customer Relations (800) 767-2775.  Wait for a human to come on the line and ask politely and firmly that you want to be transferred over to the Customer Relations department.  Explain your situation to them. 

  • New macbook pro fail to respond to the power button

    Why did my new macbook pro fail to respond to the power button?
    I have a new 13" MacBook Pro Retina (10.9.1) which I have been using for about 3 weeks. I am new to Mac and am in the process of making the transition from Windows XP.
    Today, with the battery at 100% and the power lead disconnected, I left the mac with the lid closed but, when I returned, it did not come back to like when I opened the lid. Also, it would not respond to the power button.
    After some web searching, I managed to get it back to life after resetting the SMC.
    Is this a software problem, or is it more likely to be a hardware problem?

    Highly unlikely that software is involved - especially since resetting the SMC corrected the problem.
    Unless it happens again, I would forget it. If it occurs again, take it in for warranty service.
    Barry

  • My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

    My macbook pro doesn't turn on. The battery is charged but the screen stays black when I press the power button. Anybody has a solution for me please?

    Try a #1 SMC Reset and see the Apple links, if that doesn't work make a appointment for a evaluation.
    ..Step by Step to fix your Mac

  • Macbook pro late 2011. Have power on the battery but doesn't turn on at all.

    Macbook pro late 2011. Have power on the battery but doesn't turn on at all. Not even a sound, my mac has stayed turned off in nearly a month and now its not working???
    Any ideas to what the problem could be?
    Regards// Michael

    If a SMC reset does not bring life to your MBP, make an appointment at an Apple store genus bar for a free diagnosis.
    http://support.apple.com/kb/ht3964
    Ciao.

  • Macbook pro doesn't start up anymore

    Guys i got a pretty big problem. My 1st gen macbook pro doesn't wanna completely start up anymore. When i press the startup button, I get the bong and when the apple logo appears, it suddenly restarts. So the bong appears, the apple logo shows up and then it restarts again: this keeps on going and i cant stop it unless i pull out the battery and power plug. I have no idea how this is possible: I did nothing unusual with my computer. The only alarming thing that happened before this was a kernel panic. After restarting my computer everything was fine and the mbp seemed to have recovered. So I then left it as I went for dinner and when i came back, the screen was black en frozen. So I turned of the mbp and then it wouldnt start up anymore!!!
    Can anyone please help me!!!

    Place the OSX installation DVD that came with your computer and hold down 'C' during the restart. That should open up the installation/repair screen. There you can check your volume and repair it through Disk Utility. If you can't fix your drive here, you can restart your machine in target mode and backup your drive (given that you have another computer to back it up to) and then hard-format and reinstall. This might be a long and hard process but it should solve your problems. If you have more questions, just post.
    Cheers-

  • My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?

    My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start.  Do you have any ideas of why this should be or what I should do to resolve this?  Thanks  Eamonn

    Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail.  I get the error message "disk0s2: media is not present".  Following this I inserted the installation disc and from there ran disc utility.  The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
    I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
    Any ideas of what could be causing this or the best solution?  I fear I am fast running out of options.

  • My macbook pro doesn't bootbeyond the grey screen with apple icon and spinning wheel.

    My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel.  I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions.  Should I restart my computer?

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

Maybe you are looking for

  • IPhone no longer syncs with iTunes

    I upgraded my computer to Leopard today and everything seems to be working properly. However, when I plug in my iPhone it doesn't start and show up in iTunes. Is there something I've missed?

  • How to migrate from G5 dual 1.6 to GT5 dual 1.8 GHz

    The processor in my dual 1.6 GHz G5 failed. Rather than pay $1200 for a new processor, I bought a used dual 1.8 GHz G5 for $1100. Desperate to get up and running quickly, I pulled the drive on the new machine, which has Mac OSX 10.5, and replaced it

  • My iTunes won't open on windows 7.

    Hi, I have been using iTunes for years now and just recently I was organizing my computer's files and deleted some things. I am not sure what I deleted, I thought everything deleted was useless. But now I can't open iTunes. Whenever I try too I get "

  • How to register a file adapter in XI Server? [XI 3.0 / J2SE Plain Adapter]

    Hi, I am trying to register an outbound file adapter (J2SE Plain Adapter Engine) in the XI server to finally map the adapter to a communiction channel. What I tried is to activate the SLDaccessor service in the J2SE Plain Adapter Engine (as mentioned

  • ORACLE8 ENTERPRISE EDITION의  주요 신기능

    제품 : ORACLE SERVER 작성날짜 : 2004-08-16 Oracle 8 Enterprise Edition 의 주요 신기능 ========================================== Purpose 이 자료는 Oracle8 version의 주요한 new feature에 대해 간략히 설명한다. * Oracle8 Enterprise Edition 릴리스 8.0의 주요 기능은 다음과 같다. 분할 테이블과 인덱스를 통한 사용과