MacBook Pro doesn't want to sleep - EVER

My soooo out of warrenty MacBook Pro (mid-2010 OSX 10.9.1) has stopped going to sleep altogether. It does not go to sleep when you close the lid or when you go to the apple menu and press sleep, you can still hear the fans running all the time. I noticed this as I fully charged the battery, put it to sleep and then went to use it again later in the evening to find it has no battery left. The display and keyboard lights both go off when its closed or put into sleep manually but the indicator light on the front is always solid white and the fan constantly runs. I have also tried resetting the SMC to no avail, have checked and restored my energy preferences to default, i have also disabled the wake on bluetooth and Internet options but still it will not sleep.
There is a lot of confusing information regarding this online and now i feel i am going round in circles!
Any help would be greatfully apperciated!

Test after each of the following steps that you haven’t already tried:
Step 1
Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved. Note that, as stated in the article, the computer will not sleep if Internet Sharing is enabled.
Step 2
From the menu bar, select
 ▹ System Preferences ▹ Accessibility ▹ Speakable Items: Off
Step 3
Select
 ▹ System Preferences ▹ Bluetooth ▹ Advanced...
and uncheck both boxes marked
Open Bluetooth Setup Assistant at startup if...
Step 4
Reset the SMC.
Step 5
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 6
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 7
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Similar Messages

MacBook Pro doesn't want to start up anymore.

My MacBook Pro doesn't want to start up anymore.
When I turn it on, it turns on, followed by a white/light grey screen with apple logo. After a while a loading wheel appears beneath the logo and a loading bar beneath it. The loading bar loads to about 1/5 and then disappears, leaving the computer stuck on the the white screen with the apple logo and the loading wheel.
I tried to reset the PRAM, but it didn't help, it only got the startup sound to play when I turn the MacBook on.
What can I do about this? Hopefully I don't need to lose my files.
Thanks in advance,
Emil

lonelyplanet wrote:
Seems like I have to use my Time Machine backup drive to reinstall the OS.
No you don't.
OS X can be reinstalled all by itself leaving the programs and files alone, provided the drive is working correctly.
I'm not quite sure how to recover the files from Macintosh HD that I don't want to be deleted during this process.
The TM drive is almost useless because you can't boot from it to recover your latest files with.
That's why I gave the link for the undelete boot drive, you create and boot from that, access your internal drive and grab files, then you can restore from TM or other things, like the repair list of fixes I gave you.
Could you help me a little on how to backup files manually most easily?
The problem is your machine isn't booting to grab the files.
So you need to create a external boot drive, then you can access the internal boot drive directly and grab files out of your Music, Pictures, Movies, Documents folders (etc) to the external boot drive.
Most commonly used backup methods
Or is there a way to do this without deleting all of the files in my user folders on Macintosh HD?
Yes, you can choose to create a
Create a data recovery, undelete boot drive
and recover your filesnow , or you can chose to try fixing the machine without recovering your files, but your taking your chances as we don't know how seriously wrong it is yet.
If your willing to take a risk then proceed through this list, Step 1 - 8 etc., until the machine boots up.
Step by Step to fix your Mac
If the machine doesn't boot up then you need to create the external boot drive to get the files before proceeding with further steps.
If this is too much for you, then call a local PC/Mac data recovery/repair service and they will handle it for a large fee.

Macbook Pro doesn't go into sleep mode when battery dies. Help Please!

When ever my Macbook Pro gets low on battery power I receive the "battery is low message" and instead of just going to sleep a couple minutes later it just shuts down completely. Any reason for this?? I want it to go to sleep like it used to when the battery gets low/dead.
here is my battery info!
Battery Information:
Model Information:
Manufacturer: SMP
Device name: ASMB012
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0102
Hardware Revision: 0500
Cell Revision: 0200
Charge Information:
Charge remaining (mAh): 1526
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4557
Health Information:
Cycle count: 345
Condition: Normal
Battery Installed: Yes
Amperage (mA): 1583
Voltage (mV): 12083
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 90
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 60
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Thanks for any help!!

Same exact issue on my MacBook Pro. It is brand a brand new model: MacBook Pro (June 2009), with Mac OS X 10.6.1 and "7 hour battery".
Model Information:
Manufacturer: SMP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0003
Hardware Revision: 0003
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 6515
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 6690
Health Information:
Cycle count: 27
Condition: Normal
Battery Installed: Yes
Amperage (mA): -936
Voltage (mV): 12311
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: No
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes

Macbook pro doesn't go to sleep when screen lid is shut

Hi, I've got macbook pro late 2008 model with glass trackpad. When i got it was working fine and everytime i shut the screen lid, it would goto sleep like normal macbook pro does. Recently its not going to sleep at all. I've to put it sleep to by clicking apple logo on the corner and then choosing sleep. I know its a minor thing but I want to fix it. I bought a new charger sometime ago but that doesn't seems to be doing anything to macbook pro or does it?
Thanks

I've tried SMC reset and nothing happened and PRAM reset says you shouldn't do it unless you've a problems with audio, screen and one more.
Is it safe to perform PRAM reset? I mean it wouldn't crash anything or something. Sorry kind of new here

Macbook pro doesn't go to sleep when I close screen

Okay so, I don't know exactly since when this started occurring, but whenever I close the screen of my macbook pro, it looks like it goes to sleep. but it doesn't. then when I open it back up, the fan goes up to 100% and the macbook is all warm and whatnot. Basically what I think, is that it doesn't actually go to sleep. maybe this has to do with the powernap function?
I don't really have any other problems afaik.
anyone else has this?

If you have issues like that (my MAcBook did not want to go to sleep while it was connected to power...)
what you can always do is power up the 'Terminal' and then punch in 'pmset -g assertions'. That's shoing you which application is holdng your mac back from sleep.
More details about how to use 'pmset' HERE.

MacBook Pro doesn't go to sleep

Hello,
Since I installed Mac OS X 10.6 Snow Leopard (clean install) my MacBook Pro never goes to sleep alone. If I select "Sleep" from the Apple menu or if I close down the monitor it goes normally to sleep but if I leave it on, it never goes to sleep (with Leopard I didn't have any problem).
I tried to turn off WiFi and Bluetooth connection, checked the Power Setting options when MBP isn't attached to power supply but simply it stand up ever, just the monitor goes to sleep but not the mac.
The only thing I can guess can be useful for understand the cause of the problem is my hard disk: I've changed it from the 120 GB original one with this one: http://www.wdc.com/en/products/products.asp?driveid=482 (model: WD3200BEKT).
Can someone help me?
Thanks and best regards

Hi, My new Macbook pro (10.6.4, 13") has exactly problem with your Mac, whatever I do, it just doesn't sleep base on energy saver (as you said" if leave it on, the mac never goes to sleep, just the display goes to sleep), but if i select sleep from the apple menu or close down the lid, both of the Mac or display goest to sleep.
I called Apple expert, but the problem is still here. I just bought it a few days ago, so I can apply a DOA replacement for a new Mac, but I don't know if I should do that, also i am worrying the new mac will still has the same or other problem!
Anyway, i am going to talk to Apple expert today again about this! if you have any news keep me inform,So do I!
I appreciate!
Q

MacBook Pro doesn't go into sleep mode after connecting Thunderbolt display

Hi,
after connecting a Thunderbolt display to the 2011 MacBook Pro 13", the system doesn't stay in sleep mode.
When pressing cmd.alt.eject it goes into sleep for 1 or 2 seconds and then goes back on.
everything works fine otherwise and the MacBook goes to sleep without problems if the Thunderbolt display is not attached.
Any suggestions?
Thanks in advance,
Jordi

I found the problem.
It turns out that it has nothing to do with the Thunderbolt Display, but with Bluetooth and the Magic Trackpad.
When I installed the TD, I also added a wireless keyboard and Magic Trackpad that I had been using with another system.
If the option to allow the system to wake up by Bluetooth devices is enabled (system preferences, Bluetooth, advanced), the MacBook Pro will go to sleep and immediately wake up.
Simply disabled that option and everything works fine.
Now I need to open the lid of the MBP to wake up the system. Kind of a huge power button :-)
Thanks for your help!
Jordi

MacBook Pro doesn't want to boot when cd rom is connected

Hello,
I have an issue with my MacBook Pro (2009) model.
When I'm connecting CD-ROM (internal one) computer doesn't want to boot nither from DC ROM nor from HDD.
As soon as I am dissconecting CD ROM system is booting up without any problem.
Please advise.
Thanks,
Dubbster

Hi Dubbster,
Welcome to the Apple Support Communities!
I understand that your MacBook Pro is not booting when you have the Mac OS X Install DVD inserted. Do you get any boot options when you hold down the Option key during startup? Please reference the following article and let me know if you need further assistance.
Startup Manager: How to select a startup volume
http://support.apple.com/kb/ht1310
I hope this helps,
-Joe

My MacBook Pro doesn't want to burn DL DVD?

Iv'e been tring to burn DL DVDs on my MacBook Pro but it just doesnt want too.
What should I do? I don't want to buy a external DVD burner.
Does anyone know if APPLE could install an internal DVD burner that can burn DL DVDs?
MacBook Pro 1, 1 Mac OS X (10.4.7)

Due to size constraints inside the MacBook Pro case, the higher-speed dual layer drives just didn't fit in the MacBook Pro at the time of design and manufacture. There are some drives on the horizon that will fit in this form factor - it remains to be seen what will work, or what Apple themselves includes in the later MacBook Pro revisions.
In the meanwhile, any Firewire or USB 2.0 drive should work just fine. iDVD in iLife '06 has been updated to permit burning of projects on third party available DVD burners now.
If this is helpful or solves your problem, please indicate this by clicking the appropriate icon in the header of this response.

Macbook Pro doesn't go to sleep automatically!

Very strange. My Macbook Pro mid-2010 won't go to sleep automatically. Closing the lid puts it to sleep, forcing it to sleep works. But setting it up in the Energy Saver Preferecnes to go to sleep during inactivity doesnt work. Have this problem since I can remember. Just reset my entire Harddrive and reinstalled Snow Leopard, for other reasons though. I thought it would work now, as any processes that might keep my Macbook running might have been deleted in the process. I'm kind of desperate to get this fixed.

You should try to update your OS to 10.6.7.
If it won't work, I'd suggest reset SMC ( Shutdown your MB Pro, let the Power Adapter connected to a known-good power source, and press Shift -Control - Option - Power button, at the same time.)
After that, turn on your computer and try it

MacBook Pro doesn't want to start

Hi,
This morning, when I tried to start my MacBook Pro and nothing really happened. He made the normal MacBook starting sound but the screen refused to open... The apple logo on the top of the computer was illuminated though.
The only solution I found is to hold the power button several seconds then start it again, press and hold the R, T, CMD, ALT buttons until a special recovery screen shows up. After that, if I turn it off normally.
Finally, I am able to restart it and the computer will work as usual.
It is not the first time I experience this problem... It happened at least 3 times.
Do you know what is causing this problem and if there is any clue of solution you could give me?
For your information, I have a MacBook Pro retina 13,3 inches with Intel Core-I5 and a 128GB flash storage bought in early December of 2014.
Thanks a lot for your help!

Hi there Lapetty11!
It sounds like you may want to try resetting the System Management Controller on your MacBook in an attempt to resolve this issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
You may also need to try booting your computer in Safe Mode, which is explained here:
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455
Thanks for using the Apple Support Communities!
Cheers,
Braden

Why mi Macbook Pro doesn't want to recognize my WD Passport after the OS X Mavericks update

Hello, when I bought my macbook pro in 2009, everything was good, now when I did the upgrade to get Mavericks, my WD Passport is not recognize, what can I do?

WD has worked very hard to make their drives incompatible with Mavericks:
The drives come with software on the drive which is incompatible.
The drives come with incompatible software (the humorously named WD SmartWare) which they want you to install on your mac, to run the drive with the incompatible software already on it.
In addition to being incompatible, this software is unnecessary in the first place.
WD didn't stop there: in some cases WD drives have firmware in the hard drive enclosure which is also incompatible with Mavericks.
I'd try:
hopefully you have the data on the drive backed up somewhere else.
reformat (erase) the drive with disk utility if you can.
uninstall the WD software on your Mac
research the drive to see if it is one of the ones with the incompatible firmware. If it is:
If you trust WD (I wouldn't), see if they have a firmware update.
Otherwise, remove the drive from the enclosure and put it in another (non-WD) enclosure.
Or if you can return it for a refund, do that.

MacBook Pro doesn't go to sleep by itself

So here's my problem.
I can put my MBP asleep via the apple menu just fine, and also if I close the lid it goes to sleep without a problem. However, if I left it inactive for the 5 minutes I have set in the energy settings it doesn't go to sleep. This started happening when I installed Leopard (fresh install, then migration assist).
I've found some people having same issues and resolving them by resetting the SMC. For me it didn't work. Has anyone suffered from the same issue?

Same here! My MBP is brand new (less than month). It is set to go to sleep after 5 minutes and the hard discs are to go to sleep whenever possible. I have bluetooth turned off and the only program running is Firefox.
But if I walk away from the computer without closing it, the battery will completely drain.
I know that my mother's G4 can be left open with no problem, so I don't get it.
Any ideas out there?
Maxcat68

Plz help. MacBook Pro doesn't want to start up. Stays on white screen starting up!

Ok, so my MacBook Pro is not starting up properly. When I shut it down and turn it back on my Mac just froze on the white screen when starting it up. All I have now is a start up blank screen with the apple and the small spinning wheel below it. Just like starting you MacBook normally but instead it just stays there with the wheel spinning for minutes!!! Nothing come up. Not my sign in screen but the white screen. Pls help!!!

hoangtu23 wrote:
I have this question too.
Below is video record of my macbook pro screen:
http://www.youtube.com/watch?v=8xThWNuw7t0
For hoangtu23, looks like you have a graphics card problem that will need a visit to an Apple Store (make a genius bar apointment first) or to a Apple authorized service center.

My MacBook Pro doesn't want to open with my password or guess

I was deleting video in my iTunes storage and I received a pop notice to free up some space. I did mange to free up some space but once I restarted my MacBook I couldn't register back in with my password, all I get is a blank screen every time I try to go in.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 4
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

MacBook Pro doesn't want to sleep - EVER

Similar Messages

Maybe you are looking for