Macbook Pro drains a lot battery when sleep

When I put my computer to sleep it drains a lot battery life. Today I put my computer to sleep for a hour and it drained 3%. My computer is 3 months old and the battery only has 55 charges on it.

Good evening chilei89,
What you have reported seems absolutely fine to me. If you truly are concerned about your MBP only consuming 3% of battery power while it is asleep then you can try changing your battery consumption settings. You may also try plugging in the AC adapter or just shutting it down instead of putting it in sleep mode if you are not going to use it for a while and you are not going to use the AC adapter. I hope this helps you out. Again, I don't see anything you have to be concerned about. Thank you.
AMMOCAN

Similar Messages

  • Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

    Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

    Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

  • Hi, I turned my macbook pro off before I went to sleep, and this morning when I awaken. I can't seem to use the volume at all! I went to system preferences sound output BUT everything is light grey and it some-how looks like I don't have permission.

    Hi, I turned my MacBook Pro off before I went to sleep, and this morning when I awaken. I can't seem to turn up or down my volume. It comes up with all the volume bars and a little circle sign with a diagonal line in the middle, like a stop sign. I have gone to system preferences > Volume > Output BUT all my volume preferences have gone all light grey and wont let me access them.
    Anyone help?

    Hi EmalooneyToons,
    Welcome to Apple Support Communities!
    Take a look at the article linked below, it provides some suggestions for troubleshooting audio issues on Macs and when to setup service for your device, if needed.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Jason

  • My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and in use.

    My Macbook Pro (5,3) sporadically goes to sleep when the lid is open and I am actively using it.  This problem happens both with OS X 10.7.2 and Windows 7 (64bit), so I don't think it's an OS issue.  Has anyone else encountered this? It's still covered under apple care... But I'd rather try to fix it myself before having to bring it in.
    Thanks!

    I wouldn't be surprised if this were the case - it does get hot.  However, this happens even when I first open it after having it in sleep mode for an entire night...  Do you know how to run the diag tool with OS X 10.7?

  • Macbook pro makes a lot of noise when its is on.

    Macbook Pro makes a lot of noise when its being used. It is the sound of the processor and it gets very hot at the bottom of the laptop. Any sugestions for why this is happening? Any solutions??

    Hi p,
    The CPU doesn't make noise, so it's probably fans you're hearing, which would correspond with the heat you're feeling. Read this link to see if there's a process running too high:
    http://support.apple.com/kb/TS1473

  • How can i get my macbook pro too stay on and not sleep when lid is closed?

    how can i get my macbook pro too stay on and not sleep when lid is closed?

    If the machine is asleep, lid closed, and you plug in to an external monitor and an external USB keyboard, the machine will wake, anbd reconfigure the screen resolution for the external monitor, Once it has made this configuration change, you can open the lid and it will continue to address only the external monitor.  At least that's how my early MacBook Pro unibody 13" works. It seems to run a bit cooler this way. It gets quite toasty with the lid closed while doing anything demanding and you are more likely to hear the fan come on.  I have not seen any temps that would cause alarm, but I do get a high speed (6000 rpm), noisy fan sometimes with the lid closed, .
    If you operate in the open-lid, external monitor only mode, if you deactivate the monitor for any reason, when it reactivates it will be running both screens, with all the navigation hassles this entails, so I generally set it not to deactivate the screen when in this mode.
    Thus I agree with those who say that some of the cooling air is drawn in around the keyboard, the difference in cooling performance is observable.  If you activate istat pro, get the computer hot running in clamshell mode, and open the lid, you can watch the CPU temp drop by a few degrees C within a couple minutes.  It isn't a huge difference, but enough the lower the fan speeds.

  • How do i stop my Macbook pro from starting from shutdown when I plug it in

    My MacBook pro will not stay off when i plug it in. When i attach the power adapter even when the screen is shut the start sound comes on and it powers up. is there a setting where i can fix this? ive already tried energy savcer and battery settings

    Hey there!! Same problem here..
    __My MacBook pro will not stay off when i plug it in. When i attach the power adapter even when the screen is shut the start sound comes on and it powers up__(TAYLOR SAIDS)
    The white sleep light flashes 6 times and start without sound start ...
    For the second time makes reboot and then heard the sound start!!!!####
    please help and thanks

  • MacBook pro will not charge even when the charger is plugged in and working

    So this is a strange one.
    I have been using my MacBook pro for a lot of film editing and motion graphics. Recently, I noticed that my battery kept going down, even when charging. I thought nothing on it and kept using it. After around 4 hours, the battery went from 90% to 23% WHILE plugged in. This got me nervous. When I plug in the MagSafe charger, the light comes on and I get the "charging" symbol in my toolbar. The light turns orange and then, after a few minutes, the power starts to go down instead of up.
    I have had this laptop since Christmas 2012 and this has never happened before. The laptop does charge, but only when I am running no application, when the screen is shut or when the laptop is powered off. Bear in mind that right now, I am on Firefox, that is the only application open, yet the charge is still going down. I assumed it was because I was using Premiere CS6, After Effects CS6 and Cinema4D, but now even when they are not open, the batter will not charge when I am using the laptop.
    What is going on? Is in the charger? Any help would be greatly appreciated and I am starting to stress!
    Thank you everyone for reading,
    -Rory Campbell
    UPDATE: I am currently only running Firefox and Finder. Now the laptop is charging as usual. However the second I open up Premiere, After Effects etc, it goes down. I have no idea what is going on!

    Try resetting the PRAM and SMC. If you don't know how to, don't worry. They're very easy to reset. Just google how to do it. If that doesn't work, the only thing I would suggest is to take both the laptop and the charger to your local genius bar to have them examined. If it's less than a year old, apple should replace whatever is wrong with it as long as it was a factory defect.

  • Macbook pro freezes after coming out of sleep mode

    Lately my 13" early 2011 Macbook Pro has been locking up when in sleep mode. All I get is a blank screen and the cursor which responds, but no buttons pushed on the keyboard resolve issue. Resolution thus far has been to hard boot the macbook... Anyone have any ideas how to troubleshoot or determine cause of issue?

    Try Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for
    "Portble computers that have a battery you should not remove on your own".
    Best.

  • I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?

    My Macbook Pro fell off my bed (approx. 3ft) and dented the left side of the front left corner on the battery meter. Besides the damage everything seemed okay for a little while until I kept getting a erratic curser track pad. I kept cleaning it thinking some dirty or oil may of got on it or in the edges, but long story short I found out my battery is swollen and thats the reason for the erratic curser. The drop and dent impacted the battery causing it to swell. I feel that I just need a new battery. I purchased my macbook from the apple store and still have applecare. However I've researched online a bit and saw some people posted that if you drop your macbook, Apple will void my coverage. I also read that when people have had a swollen battery and applecare, they just brought it into the Genius bar and they went to the back and brought them a new battery. I've been super nervous to go see them as I've spent the extra bucks on Applecare and did not get any use of it. If anyone has had this issue or knows about it, please let me know!!
    MacBook Pro 13" 2012, Mac OS X (10.9.3)

    I dropped my Macbook Pro and now the battery is swollen, should I bring it to the genius bar?
    Yes !
    I would take it in before it gets worse and breaks something.
    Genius reservation http://www.apple.com/retail/geniusbar/
    on-line https://getsupport.apple.com/GetproductgroupList.action
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How to Make my Macbook Pro's internal HDD external, when I get a SSD?

    Hey, I know there are other posts on what enclosure you can use and if it's a possibility, but I haven't seen any that tell me how I get OS X on the SSD without a disc? Can I download the installer on a flash drive somehow? Also, I am wondering if this really is a good idea, using my Macbook Pro's HDD for a backup HDD, instead of buying one? I have no use for it anyway, if and when I get a new SSD. BTW, the HDD is the upgraded factory 500gb 7200rpm. Also, do you think it's smarter to have a bigger backup drive than internal drive? In other words, I would like to get a 1TB Samsung 850 Pro SSD, and my current HDD is only 500GB.... I am a musician and need a lot of storage for musical purposes. I use Final Cut Pro, Logic Pro X, Ableton Live 9, Office, and Photoshop.... My Macbook Pro is a Late 2011 Macbook Pro 15.4' 2.2ghz quad core i7 8gb RAM. Oh yeah and a mother thing is, I think I should get an enclosure that has a thunderbolt port with usb, what are your thoughts?

    How to Make my Macbook Pro's internal HDD external, when I get a SSD?
    Get an externel enclosure at the same time.
    You can order from OWC
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Put the SSD in the externel enclosure and use something like Carbon Copy Cloner,  to clone the internal drive and all it content to the SSD.  Then swap them out.
    Always good to have more than one backup.

  • My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

    My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
    Will not show up in safe mode, will not show when started from Windows 7 DVD.
    I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
    Can see the PC volume from Mac side with files.
    I've looked at all the online solutions so far and have tried most of them without success. Please help!
    Specs:
    2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP52.008E.B05
      SMC Version (system):          1.42f4
      Serial Number (system):          7302300GANE
      Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
      Sudden Motion Sensor:
      State:          Enabled

    EDIT: RESOLVED
    For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
    Specifically, the posts by Dunsany and valkyr did the trick.  I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally.  I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
    Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again.  I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time.  Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black.  I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
    Hope this helps someone else!

  • Macbook pro retina color profile changes when switching from integrated to discrete

    Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

    Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
    You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

  • I will be out of town for two months, will my MacBook Pro drain out by then?

    I will be out of town for two months, will my MacBook Pro drain out by then?
    If yes what precautions should I take??

    mmnoble88,
    I mean that it should not be charged higher than 50% prior to a period of not being used. If its battery is higher than 50% just before you head out of town, you should let it discharge until it’s at 50% or less.

  • What i gonna do to my macbook pro its easy low battery.

    what i gonna do to my macbook pro its easy low battery.

    not sure what you mean by easily low - as Courcoul has stated - replace it if you're having problems with it.
    or, keep it plugged in.
    what applications are you running that makes your battery drain fast?  if you're playing games or watching videos - you're lucky to get 3 hours of battery life.

Maybe you are looking for

  • .properties config files

    Hi developers, I know that WDJ allow .properties files to be accessed both by API and by Visual Admin. I would like to do the same with properties file placed in a J2EE server component accessed by plain java object (pojo). I know how to read files i

  • Is there a WIFI bug with IOS 5?

    Ever since I upgraded my iPad 2 to IOS 5, it keeps dropping WIFI. I used to use it for taking online lectures via AdobeConnect. Now, the iPad drops the wifi connection totally 60+ minutes into the lecture. Nothing works to fix it other than time (sev

  • Why won't Colorfly C3 MP3/WAV player appear on my OSX 10.9.5 desktop?

    Hello. I've just bought a Colorfly C3 MP3/WAV player. It won't appear on my OSX 10.9.5 (Maverick) desktop - but will appear on the desktop of an older computer running Snow Leopard. As all my music is in iTunes on my Maverick OS - I need it to work o

  • Internetseite wird nicht geöffnet, komische Zeichen

    Seit einiger Zeit kann ich manche Internetseiten nicht öffnen. Es kommen dann komische Zeichen wie diese hier: �`I�%&/m�{J�J��t��`$ؐ@������iG#)� *��eVe]f@�흼��{���{���;� und bei der Adresse oben in der Leiste steht dann am Ende .aspx wie bekomme ich

  • CFIF browser detect change over

    I wrote this vrowser sniffer in Cf and it works nicely: <cfif #CGI.HTTP_USER_AGENT# CONTAINS "Mozilla/4.*.* [en]"> this code <cfelse> this code </cfif> Now this is what I need to do. I need to make this into an asp statement. Can anyone help me to ma