Macbook pro dropped in water. Any hope?

Macbook Pro was dropped into a bathtub. It has shut down. Any hope of survival?

It may take more than a few days, because the interior has to be bone dry. There could be water trapped inside, or wicked under components, and this could take a very long time to dry.
Was the water just clean water, or was it soapy? If soapy, it might be necessary to open up the Mac and rinse off the circuitry with deionized or distilled water and then let it dry thoroughly.
In any event, I think it would be prudent to open up the Mac anyway so that the air can really get to every nook and cranny so that any residual moisture could evaporate. I also think it would be prudent to let it dry for at least a couple of weeks, maybe more if you live in a humid climate.
Letting a fan blow across it is OK, but DO NOT use a hair drier--it's way to easy to inflict further damage.
If it's just water, there is actually a decent chance it might be resurrectable--although I'm not sure about the display if any water got into it. If it wasn't immersed for very long, chances are better.
Good luck!

Similar Messages

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

Late 2013 retina macbook pro drops thunderbolt ethernet cyclically

My new (late 2013) retina macbook pro drops the wired ethernet connection many times a day. Each time killing off all VPN and ssh sessions. This is using the apple thunderbolt to gigE adapter.
This is the second thunderbolt adapter I've received from Apple. Both do the same thing.
Here's my console log filtered on "Link". It's a continuous series of link up/link down messages.
Same problem on both thunderbolt ports too.
3/20/14 5:55:15.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 5:58:49.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,cde1,3c00]
3/20/14 5:59:29.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 6:29:35.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 6:30:15.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 6:33:10.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 6:36:17.339 PM com.apple.backupd[68869]: Copied 452 items (11.2 MB) from volume Macintosh HD. Linked 4052.
3/20/14 6:37:24.312 PM com.apple.backupd[68869]: Copied 70 items (346 KB) from volume Macintosh HD. Linked 3127.
3/20/14 6:37:54.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 6:40:15.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 6:40:55.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 7:20:00.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 7:42:27.506 PM com.apple.backupd[69492]: Copied 3189 items (81.4 MB) from volume Macintosh HD. Linked 12603.
3/20/14 7:43:20.331 PM com.apple.backupd[69492]: Copied 107 items (6.4 MB) from volume Macintosh HD. Linked 2841.
3/20/14 7:52:52.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 8:43:59.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 8:46:52.967 PM com.apple.backupd[69726]: Copied 428 items (10.2 MB) from volume Macintosh HD. Linked 4063.
3/20/14 8:47:26.894 PM com.apple.backupd[69726]: Copied 64 items (228 KB) from volume Macintosh HD. Linked 2696.
3/20/14 8:47:51.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 9:08:45.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 9:22:52.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 9:52:57.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]
3/20/14 9:55:36.038 PM com.apple.backupd[70010]: Copied 490 items (13.9 MB) from volume Macintosh HD. Linked 4141.
3/20/14 9:56:06.813 PM com.apple.backupd[70010]: Copied 61 items (584 KB) from volume Macintosh HD. Linked 2704.
3/20/14 9:56:28.000 PM kernel[0]: AppleBCM5701Ethernet [en3]: Link down (womp enabled, proxy zeroed)
3/20/14 10:47:53.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en3, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,cde1,3c00]

Oops, no idea where the mountainlion thing came from. cut&paste error I expect, but , yes, you are correct, mavericks 10.9.2
I'm about to that point, but it's going to be hard for them to diagnose because it's so random. I'll go in there, it'll work, then we'll stand around staring at eachother for a bit.
Then they'll say, you have to reload your OS from scratch and I'll say "but I just did that" and that will be it.
Maybe that's a bit overly cynical, but I'm not holding out a lot of hope for the 3 hours time suck that a trip to the mother ship.

I can't unlock my MacBook Pro "find my mac" any suggestions?

OS X Yosemite Version 10.10.1
MacBook Pro (15" Mid 2012
I can't unlock my MacBook Pro "find my mac" any suggestions?
Cheers
Taff

Philly_Phan,
Can I take this step by step?
I want to activate the "Find my Mac" option in System Preferences and saw the message below.
Are you able to guide me from here? I did something yesterday and got the message that my mac had been locked by my Mac?
My apologies but i can't seem to fond where I went to get this message. I hope this helps you to help me.
Cheers
Taff

My MacBook Pro won't load any web page I have restarted and safe booted still nothing

My MacBook Pro will not load any web pages. Safari opens but when I click on top sites or type in a website it will start but not get past half of the address before stopping and going no further. I have restarted and restarted in safe boot and still no change. I'm am connected to the internet wirelessly and my iPad mini is connecting to the internet wirelessly fine, so I think the internet is fine. What can I try next?
Thanks

Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the boxes beside all items.
Just check the box beside “Remove all website data”.
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addres

I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro. Is there any way to recover this info? Some documents can be opened and resaved with textedit, but not my database with all important addresses.

I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
Regards,
Barry

I did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

i did hold the ALT cmand r key but i cant see the globe i dont know how i can fix my macbook pro late 2008 can any 1 plzzzz help me im very upsate but i live PAKISTAN in here i cant find os x lion disk i dont know what to do if i get the os x lion usb

That does not work on model year older then 2010 and really doesn't work on any older then late 2011 models.
You will need a set of original system dvd disc thjat are always sypplied with every mac sold before Lion came out. Systems older then late release early 2011 models.
If you don't have them you kcan order a replacement set from apple by calling them. Have the serial number of you mac handy.

My macbook pro is not charging - any help please!?

My macbook pro is not charging - any help please!?
<Edited by Host>

Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

Spilled liquid on MacBook Pro - won't start - any suggestions?

spilled liquid on MacBook Pro - won't start - any suggestions?

Thank you both for your responses! I watched a video on how to remove the hard drive - special tork(?) screwdriver and too many steps for me to feel confident about doing it myself, so I took the computer to an Apple Store - and thank God, the hard drive appeared undamaged - they are transferring the data to a new Macbook Pro. The loss of data was the scariest part, so I am breathing again!
The laptop was three years old, I was hoping for another year or so before upgrading, but such is life. I appreciate your upfront advice.

My MacBook Pro is very slow any suggestions?

My MacBook Pro is very slow any suggestions?

OS X 10.7/10.8
http://support.apple.com/kb/PH3915
Start up in Safe Mode.
http://support.apple.com/kb/PH4373
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836?viewlocale=en_US
Increase Disk Space
http://support.apple.com/kb/PH10677?viewlocale=en_US

What can I do? my macbook pro rejcets to eject any cds or dvds I put on !!!

what can I do? my macbook pro rejcets to eject any cds or dvds I put on !!!

The drive accepts discs but they do not mount or are automatically ejected
Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
Reset the Power Manager (PMU) or System Management Controller (SMC).
Ensure your drive can read the specific type of disc being used. For example a "combo drive" can read a DVD-R and burn a CD-R however it cannot burn a DVD-R. The utility System Profiler may provide additional information regarding what media your computer supports.
If the discs continue to not be recognized, please contact Apple, contact an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store for additional troubleshooting, evaluation, or service.
source: http://support.apple.com/kb/ht2801

Have situation on a unprotected wireless when accessing I cannot get a router address. I'm on system 10.6.8 on MacBook Pro summer 2009. Any thoughts on how to determine what's up?

Have situation on a unprotected wireless when accessing I cannot get a router address. I'm on system 10.6.8 on MacBook Pro summer 2009. Any thoughts on how to determine what's up?

You have basically verified that the issue is NOT with your MBP, but with this particular Wi-Fi network. Even though it may be unsecured, the provider may have elected to configure it for MAC filtering. In this case I am referring to the MAC (Media Access Control) address and not your Mac laptop itself. If this has been enabled, your Mac would only be able to connect if the Mac's MAC address was added to that filter.

My macbook pro will not detect any external monitors

My macbook pro will not detect any external monitors, worked 'once' when connect to a TV.
Have read a lot of web comments, most not very usefull.

Hi a,
Check the setting in Sys Prefs > Displays.
Try a different adapter and/or cable.

IPhone music will not respond to Play button after being paused. The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

iPhone music will not respond to Play button after being paused.
The same music is on my iPad and MacBook Pro without problems. Any suggestions about cause and solution.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Macbook pro dropped in water. Any hope?

Similar Messages

Maybe you are looking for