Macbook Pro-DVD drive problems HELP!!

I pressed eject to make sure nothing was in it and nothing came out. I then tried putting my dvd into the computer and it was kinda hard. It went in with force, but the it kicked it out. Whats wrong????

Hi s,
These drives are made to pull the disc in once you've inserted the disc about 75% of the way in. Don't force it past this point. If it's difficult to insert a disc even part of the way, there's something physically wrong with the drive; maybe the loading mechanism has issues or maybe the case is bent enough to prevent the disc from sliding smoothly in. Whatever the case, I'd suggest bringing it in to an Apple Store or AASP to have them look at it.

Similar Messages

  • My macbook pro dvd drive opens all disks as blank, can I fix it?

    My macbook pro dvd drive opens all disks as blank. I have no access to a near by apple store as I live in remote NSW. I purchased the macbook when I lived in Sydney and the old owner had just had a fresh copy of the OS loaded. I've read a discussion of a similar nature and the only comment was take it back, that is easier said than done. Is there a fix I can do from home?

    Nifa86 wrote:
    the old owner
    If you didn't buy this from the store, the first thing you need to do is boot from the install DVD, erase the disk drive (perhaps even zeroing it) and install a fresh copy of the OS. You do not want to inherit any changes the previous owner may have made to the system software (or worse).
    had just had a fresh copy of the OS loaded
    …and the cheque is in the mail.
    I am talking about putting in any CD that is known to have content and it loads the CD and says its blank with nothing on it
    Who says?
    Anyway, try
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>

  • My MacBook Pro DVD drive keeps spinning and looking for a disc when there isn't one.

    My MacBook Pro disc drive keeps spinning and looking for a disc when there isn't one in there. The DVD application is closed and as far as I can tell, the eject button is not stuck. I've restarted, but the problem persists. Please help!

    Try these methods:
    credit Kappy,
    Ciao.

  • Macbook Pro Hard Drive Problem - Please Help

    My macbook pro had a hard drive failure so I went out and bought a new hard drive and got it to work with the Mac OS, although 2 days later it crashed and now it is not being found when I use the disk utility (Cmd-R), I even ran a hardware test and showed no trouble found.
    Should I return this hard drive and get another?
    Or is there another problem that is occuring?
    I have a Macbook Pro (mid 2012)
    Thank You.

    I just installed a new ribbon cable for the hard drive...Now I get a new error that is popping a message saying "2003-f", this happens when I try to go to the online recovery (CMD-R). I tried two different hard drives and still won't let me get to the utility.
    Someone please help, my mini semester classes have started for my University, and I am stuck with no laptop.
    Thank You.

  • Windows 7 RC installation on MacBook Pro: 'DVD drive device driver missing'

    I'm trying to install the Windows 7 RC on my unibody MacBook Pro (purchased november 2008). I create the partition in Boot Camp, insert the install DVD, and restart the system. Then the Windows setup starts as it's supposed to (Windows is loading files). The install program launches fine, and I get to choose language settings.
    And now it all fails. After I've chosen language settings, I get the message: "A required CD(DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now."
    Screenshot of the message: http://img25.imageshack.us/my.php?image=dsc00102yyh.jpg
    I'm kinda baffled by this message. Obviously the drive can be use by the install program, but it still complains of a missing driver. I had no trouble installing the Windows 7 beta earlier this year.
    I've done some googling, and it appears to be problem experienced by some others. Someone had the issue on an Asus machine (I think), and the solution was to download the driver and out it on a USB stick. But I can't seem to find the driver for the MBP DVD drive anywhere.
    Has anyone else experienced this issue?

    After countless days trying to solve this problem, I feel I can now add to the few solutions presented on the various forums of the internet. I'll post here because 1: i'm a mac user for everyday life although like most have as many pc's as well. 2: I already have a login for these forums!
    okay so i tried everything from re-burns to usb install (which I could not complete because removable drives are not recognized by xp and I don't have a vista system). The problem for me ended up being because the DVD drive was plugged into the primary master ide channel. My hard drive for the unit i was installing windows on is sata and was configured as such (not bridged into IDE channel by bios). So in a nutshell it seems like the hard drive and the DVD drive are nit picky in regards to the IDE configuration of the drives themselves. This won't help for virtualization on a mac pro I realize but nonetheless is food for thought hopefully for all the people searching for " windows 7 install cd/dvd device driver missing " in their search engine!
    Oh boy one more reason to love mac's
    Christos

  • MacBook Pro DVD drive issues

    Hi there, recently I got a something strange problem with the DVD drive in my MacBook Pro 15" (2,2Ghz Intel core Duo, 10.5.8). Beginning with the error 0x80020042 first I tried cleaning the laser lens which worked for a few times, I also had errors like "... illegal access..", or the drive just could not read from disks, or the system does not recognize a blank disk was inserted. Using Toast to burn files to CDs it turns red indicating that there is not enough space on the disk even if the files are small, only a few kilobytes or megabytes large. Using the Mac OS I get the same message.
    I'd appreciate your help and suggestions.
    Thanks.

    maybe its hardware issue if you contact apple store or apple support they could help you

  • I can't get Macbook Pro DVD drive to read my Windows 7 upgrade disk.

    I have a 15" Macbook Pro running OSX 10.6.8.  I have been trying to upgrade the OS in my VMWare Virtual Machine from XP to Windows 7.  However, when I insert the upgrade disk, it just spins for a few minutes and then tells me the disk is a blank disk.  I  tried it with the drive tied to the VM XP OS, but that did not work and got the same result.  I then tried the disk in a PC I have and it seems to work fine there.  Also, I have tried other disks in my Mac drive (e.g. DVD movies) and they seem to work as well.  I am not quite sure where the problem is.  Any ideas?

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.  I suggest you post your question on the VMWare Fusion forums.
    http://communities.vmware.com/index.jspa

  • Vista has no drivers for MacBook Pro DVD drive

    When I boot into Vista, everything works well enough but I can't use the DVD drive on my MacBook Pro. Under the device manager it's listed as not having drivers and when you tell it to find them on the internet, it comes up empty handed.
    Anyone know where I can find drivers for this drive? It's a Matsushita UJ-857D.

    I've been having the same problem. THere was a discussion with a link that no longer exists.

  • MacBook Pro DVD Drive Bitsettings/Booktype

    I have a MacBook Pro with a 'MATSHITA DVD-R UJ-857D' DVD Drive and I am wanting to make changes to the Booktype when I burn a DVD. I have not been able to find a solution but below is a list of what I have tried:
    * Emulated Windows XP and tried making chages with IMGBURN.
    * Emulated IMGBURN under MacOSX using CrossOver Mac.
    * Tried looking for firmware updates.
    Please help me solve this issue or put me out of my misery so if required I will go buy a new Pioneer 112D.
    Many thanks in advance.
    Luigi

    This page might help:
    http://www.k-probe.com/bitsetting-booktype-faq.php
    This page has an OSX Tool:
    http://www.plak.net/dvdplustool/

  • MacBook Pro Super Drive problems.

    Hi, yesterday I purchased a 2011 i5 13" MacBook Pro and I am attemting to burn music onto CD's using the Pro's SuperDrive but when I Burn a CD it wil burn the songs but then I will get the message in iTunes, "Finishing" I will then get an error saying it couldn't finish the burn due to some kind of "medium burn" issue. I tried ejecting the disk and putting it inside the drive and it showed the song as tracks (Track 1, 2, 3...) I will then attempt to play one of the songs (Double click a song) and I end up getting a never ending rainbow loading logo and the only way to be able to do anything with my Mac is to force quit iTunes. Any assistance will help. Thanks.

    I too have experienced these issues, and after having done a little more online research, it appears that many others have as well. My drive works on reading music CD's probably 60% of the time... Which I find to be unacceptable.
    However, it hasn't become such a problem that it requires hardware work just yet. Hopefully it's merely a driver or software issue that can be resolved in the new OS.
    Tom
    MacBook Pro 15   Mac OS X (10.4.7)  

  • MacBook Pro Optical Drive Problems

    Hello Forum,
    I bought a MacBook Pro on 17July2006 and soon discovered that the optical drive worked only occasionally ( It would only read a CD or DVD when it wanted to, new or old. I would read songs to Itunes on a hit or miss basis. If a CD was read into Itunes, only the first one or two songs would be converted to AAC and subsequently burned before the conversion process would hang. New programs would not be read by the optical drive.) I sent the computer back to an official Apple repair station and I was pleased to see the computer and drive repaired and fully operational in a six day turnaround.
    That's the good news. The bad news is the drive crashed again last night after working only six days!!! This is my first Apple computer and so far I am not a happy camper. I've called Apple support and service and they are sending out a second service return repair carton.
    Is anyone else experiencing multiple failures like this? I'm wondering if they just cleaned and/or adjusted the drive the first service appointment. I hope they replace the drive if they did not the first time. The other thought is that the optical drive is failing because of thermal issues either local to my machine or the MacBook Pro line in general.
    Anyone have any thoughts or experience
    aero3753
    Peoria, Il US

    I too have experienced these issues, and after having done a little more online research, it appears that many others have as well. My drive works on reading music CD's probably 60% of the time... Which I find to be unacceptable.
    However, it hasn't become such a problem that it requires hardware work just yet. Hopefully it's merely a driver or software issue that can be resolved in the new OS.
    Tom
    MacBook Pro 15   Mac OS X (10.4.7)  

  • Mac Book Pro Dvd Drive Problems

    I am having  trouble with my mac book pro's dvd drive. It's not working properly, can I just take it into the Apple store and seek help?

    you can, but you need to make an appointment with the genius bar first.

  • Using my MacBook Pro DVD drive to play movies on my HD TV

    I just bought an HD tv and the Apple TV.  I have a MacBook Pro OS-X and was told that I could use its DVD drive to view DVD's on my HD  TV via the Apple TV.  I haven't found a way to do this.  Is it doable?  I have been able to view photos from iPhoto and play music from iTunes on the tv via the Apple tv.  I just don't see any options for the DVD drive.

    In order to do that you need to use mirroring, which requires a recent Mac (2011 or later) running Mountain Lion. If using older hardware or OS you can use a 3rd party option like Airparrot. The native DVD player is blocked from mirroring so you would need to use something like VLC

  • Macbook pro dvd drive

    This morning I inserted a Cd into my dvd/cd drive in my macbook pro and it read the disc but when I ejected it a small screw came out too had to remove the screw before the disc would come out
    Before ths happened the cd drive would make an unusual sound when ejecting
    What do I do?

    Take it in to Apple right away and tell them exactly what happened and give them the screw ...

  • Macbook pro dvd drive spits out fresh blank dvd

    I have a macbook pro with Lion installed
    I am trying to write a DVD, but everytime i put a blank DVD it spits it out after 15 seconds or so, doesn't even recognizes as a blank dvd.
    This is the details of my dvd drive
    MATSHITA DVD-R   UJ-868:
      Firmware Revision:          KB19
      Interconnect:          ATAPI
      Burn Support:          Yes (Apple Shipping Drive)
      Cache:          2048 KB
      Reads DVD:          Yes
      CD-Write:          -R, -RW
      DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
      Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
      Media:          To show the available burn speeds, insert a disc and choose View > Refresh

    A fine lense cloth (for cleaning eye glasses) wrapped around a flat piece of credit card shaped plastic gently inserted and brushed once to the left side seemed to capture plenty of dust from my late 2008 MacBook Pro's Superdrive. Now DVDs work again and stay in the drive.
    Sometimes the simplest solutions are the best.

Maybe you are looking for