Macbook Pro Dvd HELP!!
I put my DVD into the drive and the DVD Player opens normally. It loads the DVD and goes to the DVD menu screen. But when I click on 'play film', the screen then goes blank and nothing happens and says that the movie is 0.00 long..... When I try to close the DVD player or the eject the DVD, it crashes so I then have to force to DVD player to quit.
see the screen shot:
It only does with with a few DVDs which play normally when I put them into a DVD player for the TV or into Windows run laptops so not sure what to do.
Hi s,
These drives are made to pull the disc in once you've inserted the disc about 75% of the way in. Don't force it past this point. If it's difficult to insert a disc even part of the way, there's something physically wrong with the drive; maybe the loading mechanism has issues or maybe the case is bent enough to prevent the disc from sliding smoothly in. Whatever the case, I'd suggest bringing it in to an Apple Store or AASP to have them look at it.
Similar Messages
-
HT1338 i lost my dvd and i want to install mac os on my macbook pro please help
i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html -
My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk
You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.
-
Is there an adapter to hook up a firewire from a cannon gl2 to a MacBook Pro? The firewire end is too big to fit in the MacBook Pro laptop help.
After identifying the exact connectors you need, check the Apple Store online and/or eBay...you should be able to buy a cable with the correct connector on each end, rather than fooling with an adapter.
-
I have just upgraded to the new OS X V. 10.10.3 but cannot access my iCloud Drive documents using the resident Pages and Numbers software on my MacBook Pro. Help is needed to access those documents using the resident software on my MacBook Pro rather than the Beta software on iCloud.com.
I have iCloud Drive set on the Finder sidebar and use that to open the Numbers Spreadsheet on iCloud.
OSX 10.10.3
Best. -
hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.
hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.
-
Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?
Upgraded to 10.8.3 and now having start up problems on MacBook Pro. Help?
Please elaborate. What do you mean by "start up problems" ? How far does it get?
Chime? Fans? gray screen? Dark Apple? spinner? spinner spins for usual amount of time and screen goes dark? question mark? tones? flashing power light? smoke? what? -
i do not know why i can't open facetime,messages,reminders and appstore on my macbook pro, please help me out
I used cleanmymac for clean up files, always worked fine before maverick, now i used it yesterday and i can not open any kind of programs except google chrome , my last time machine back up was yesterday but according to him he can restore just complete back up and the last one is in october 2013, i am desperate .
i already tried to fix permits and press weird combos of buttons on restarting. not working.
please help -
I cant connect my new wimax usb stick bm328 on my macbook pro. please help me
i cant connect my new wimax usb stick bm328 on my macbook pro. please help me
The Hardware Test detected a RAM problem. Take out the chips and make certain that the connections are clean and reinstall them. Make certain that they are well seated.
If the problem occurs again, test with one chip at a time. Also swap bays if necessary.
Please indicate if you have installed new RAM and if so what brand and the specifications.
Ciao.
Message was edited by: OGELTHORPE -
The iPhone “Nanou” cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 3.30 GB required). I have been receiving this msg every time i wanna back up my iPhone 5 to my macbook pro. plz help
I'd like an answer to this one too. I need to backup my iphone5 and am getting the same message. My old laptop is pretty full. Isn't there a way to choose an external hard drive to back up to? If there is, I don't see it.
-
I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.
Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click) -
I can't remember my password to log into my macbook pro. Help?
I can't remember my password to log into my macbook pro. Help?
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
My macbook pro dvd drive opens all disks as blank, can I fix it?
My macbook pro dvd drive opens all disks as blank. I have no access to a near by apple store as I live in remote NSW. I purchased the macbook when I lived in Sydney and the old owner had just had a fresh copy of the OS loaded. I've read a discussion of a similar nature and the only comment was take it back, that is easier said than done. Is there a fix I can do from home?
Nifa86 wrote:
the old owner
If you didn't buy this from the store, the first thing you need to do is boot from the install DVD, erase the disk drive (perhaps even zeroing it) and install a fresh copy of the OS. You do not want to inherit any changes the previous owner may have made to the system software (or worse).
had just had a fresh copy of the OS loaded
…and the cheque is in the mail.
I am talking about putting in any CD that is known to have content and it loads the CD and says its blank with nothing on it
Who says?
Anyway, try
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964> -
My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please
Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Can't install Snow Leopard on MacBook Pro - DVD won't mount
I am unable to install Snow Leopard on my MacBook Pro as the DVD won't mount. This is an early 2008 vintage MacBook Pro, intel core duo...
I'm using a OS X Snow Leopard install DVD (family licensed). This DVD has been used to install 3 other Macs in my house without a problem (about a year ago), but cannot be used to upgrade my MBP. Actually, this disk mounted on the MBP exactly once - inserted with system up, the disk mounted. Upon running the installed (a year ago), the computer restarted but hung in boot. After getting the disk ejected and the computer restarted, the disk would never mount again. I've defered upgrade for a year but at this point need to upgrade my MBP at least to Snow Leopard and possibly Lion.
The problem doesn't seem to be with the DVD, since it continues to mount fine in other computers, and in fact a borrowed Snow Leopard DVD also will not mount on the MBP.
BUT ... the problem also does not seem to be with the optical drive in my computer, as it can read & mount the install/restore disks that came with the computer as well as other CDs and DVD ROMs. Only the Snow Leopard install DVDs fail to mount.
I've also tried mounting the 10.6 install DVD on my Mac Pro desktop, making it available over the network (ethernet) with DVD/CD sharing. I can mount the remote disk from my MBP that way, but when I launch the installer, the application launches (its own menus are displayed, I can quit from menu, for example) but does nothing -- no windows open, nothing.
I've also tried "Remote Install" (again with the DVD made available with the Remote Install MacOS X application on my desktop), but when I boot the MBP with option held down, the remote disk is not available as a startup disk.
Zapping the PRAM did not help.
Am off to the store to get an optical drive cleaning kit and a blank DVD big enough to burn a new disk image, but would appreciate any further ideas at this point....Solution that worked: Copy the Install DVD to a USB flash drive and boot from that.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Up and running with Snow Leopard now and working on the updates.
Maybe you are looking for
-
I am trying to record the time for zero crossing in order to get the phase angle and inevitably get the power facto . soi was trying out a few ideas to see if this is achievable and i came up with this . can someone tell me where i am wrong . or wha
-
MacLoyal, that is my moniker! I am in a state of identity crisis because iPhoto is about to force me to break ranks and seek a place of sanity with a non-Apple photo system. I had to lose the iLife integration with dot mac. I do not want to take such
-
Mac Pro increasingly frequent screen freezes / crashes
Hi, Freezes on my MacPro are becomming increasingly frequent - I need to work out what the problem is as it's making the machine unusable. If anyone is having similar problems or has found a fix, please post here. The issue that I am seeing is that s
-
Query optimizaing for performance tune
Hi guys, The below query is taking a lot of time to execute.The main problem is with table S022.This table is going for full table scan everytime even if we give a lot of selection criteria.So is there any alternate table for S022.In
-
External number range for Int Orders
We want to define statistical internal orders employee-wise. For each employee, we want to define statistical internal orders with the same employee number for monitoring the low-valued assets given to them. My query is can we have external number