MacBook Pro DVI-Out and FrontRow Color Anomalies
ok, so i've got one of the first generation MacBook Pros 2.0GHz processor, 2GB RAM, etc. i want to use the DVI-out to connect to my Sharp Notevision projector, which has a DVI-input. i have a standard DVI cable and when i connect, everything is fine. i can display at the projector's 1280x1024 native resolution and finder and other application windows look just fine, color-wise.
however, when i jump into FrontRow (or play any Quicktime movie or use iTunes to play movies), the color shifts and looks horrible. the glow around the icons in FrontRow are oddly red, and other nuetral colors look greenish or otherwise. its almost like you've got a component cable connected with two of the channels swapped.
the same projector works fine and displays accurate color with my AppleTV and if i connect the laptop to one of my Cinema Displays, the colors for movies are all accurate. i thought maybe the DVI cable was bad, and bought a replacement and the new cable produces the same off-color results.
any help or guidance here would be greatly appreciated!
thanks,
scott
Another update, I did some research and it seems that ATI are cagily admitting to the fact that there might be a problem with the X-series;
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=26586
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=21266
http://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&questio nID=25682
You'll notice that ATI tell you to contact the manufacturer of your computer if the graphics are integrated into the motherboard. Like with Apple. Much joy to be had there.
I phoned their technical support and got talking with a specialist who was mystified and suggested 'turning off the airport'.
Also, it seems that Apple rather significantly "underclocked" the GPUs in their macbook pros;
http://www.reghardware.co.uk/2006/04/19/applemacbook_pro_gpuspeed/
http://www.maconintel.com/news.php?article=178
http://forums.macrumors.com/showthread.php?t=306024
http://forums.macrumors.com/showthread.php?t=194647
Could be running the GPUs are running on a lower voltage and maybe they're not working right, or the signal isn't stable enough to pick up an EDID? It seems to be quite a mystery. Perhaps the osx86 community will have some tricks up their sleaves for twisting the x1600's arm. Still doesn't explain why the monitor worked that one time.
This probably isn't an issue for anyone who doesn't want to plug their laptop into an external display, but I suspect it's a widespread problem just waiting to rear its ugly head, especially as HDTVs become more ubiquitous.
Anyone else struggling with external display devices, or with solutions, I'd appreciate your input.
Similar Messages
-
Hi
I've never used Color on a Macbook Pro, only on a Mac Pro
Anyone out there running Color on the new Core i5 Macbook Pros? How does it run? Is there an improvement over the previous generation?
I'm not after stats/benchmarks, I want real world feedback from users please.
Thanksgtds wrote:
I'm not after stats/benchmarks, I want real world feedback from users please.
Hi g,
If you want feedback from the people who use that model of MBP, you'd do far better posting in the forum for those machines, MBP 2009 and later (this area is for the Original MBP). Good luck. -
my macbook pro is slow and the colorwheel turns a lot. Is there an antivirus software out there recommended by the apple community?
Problem description:
MacBook Pro is running slowly and shows me the color wheel all the time.
EtreCheck version: 2.1.8 (121)
Report generated March 26, 2015 at 2:07:06 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 448
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: one day 2:51:19
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (362.93 GB free)
Encrypted AES-XTS Unlocked Converting
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[failed] com.zeobit.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
25% WindowServer
4% hidd
1% Dock
0% systemstatsd
0% AppleIDAuthAgent
Top Processes by Memory: ℹ️
86 MB Finder
77 MB WindowServer
73 MB ocspd
47 MB mds_stores
43 MB CalendarAgent
Virtual Memory Information: ℹ️
1.06 GB Free RAM
1.57 GB Active RAM
568 MB Inactive RAM
1.09 GB Wired RAM
1.46 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 25, 2015, 11:13:52 AM Self test - passed
Mar 24, 2015, 07:05:57 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.Plugin.64_2015-03-24-190557_[r edacted].cpu_resource.diag [Click for details] -
I plugged in my macbook pro power adapter and heard a loud bang. I checked the charger by opening it and found out the charger blew the whole mother board up. So i buy another charger, as i live in Egypt, that blew up the same way, please help.
You'll certainly need a new logic board.
If I were you, I would take the machine into your local Apple Store or an AASP and have them evaluate the problems and give you an estimate for repair. If you're out of warranty, be prepared to pay a very high price to get your computer repaired.
Good luck,
Clinton -
Since I installed OSX Lion on my MacBook Pro, sometimes after login, the colored wheel keeps turning and I can't do anything. When I click on some icon or in the menu, no happens.
After a long time (more than 1 hour), I decide to switch off my Mac holding the button down and when I boot and log in again, it works normally.
Remark: When I logoff, I do not ask to keep my open programs for the next session.
I have a MacBook Pro 2010 with 4GB Ram.wrong reply
-
I inserted a mini cd into my macbook pro cd slot and now i can't get it out. any suggestions?
If you can wrap some adhesive tape around a stiff business card and insert it inside and see if you can capture it. If possible, hold the MBP in a position where gravity is your ally.
You can open the MBP up, remove the optical drive and open it up or make an appointment at an Apple store genius bar and have them extract it.
Ciao. -
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
I updated to MacBook pro last night and now safari won't open
I updated my MacBook Pro last night and since I did this I can not open Safari. It crashes and sends a report to Apple. Not tech smart enouh to figure it out can anyone give me simple suggestions?
ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here. -
How do I use my serial number to find information about my MacBook Pro's Processor and RAM?
So I want to find information about my MacBook Pro's processor and RAM using the serial number because the MacBook no longer works. I remember being able to find this information on the apple website before, maybe by using the coverage checker. Did they take this information out of the coverage checker? Is it no longer possible for a costumer to obtain this information?
Append the last three characters of it to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
This won't reveal how much RAM it currently has installed.
(117541) -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.) -
I have six products in my home. I can only authorize five using my Apple ID. All my products are Apple - 1 IMAC, 2 MacBook Pros, 2 Iphones and 1 IPAD. This doesn't seem right - We are so Mac'd out in our home and yet we are now being limited to the number of products we can have using the same Apple ID. Any advice as to how to find a workable soliution to this?
ThanksAuthorise Only Applies to Computers... Not Devices...
You state you have 1 IMAC, 2 MacBook Pros, ... this = 3 Computers... you can Authorise up to 5 computers.
See Here for full details...
About authorization and deauthorization
For Devices...
See Here...
iTunes Store: Associating a device or computer to your Apple ID -
Motion crashes - Macbook Pro Software update and Firmware update
Anyone out there that is working with Motion 3.0.1 on one of the new Macbook Pros (Santa Rosa) and has installed both the Macbook Pro Software Update 1.0 and the EFI Firmware update (for the 15 inch models)???
Motion 3 crashes on the Macbook Pros with the MBP Software update installed (see thread:
http://discussions.apple.com/thread.jspa?threadID=1028746&tstart=45
The solution so far is to wipe the hard drive and reinstall everything from scratch EXCEPT the software update 1.0. However, I'm trying to find out if anyone has installed the Firmware update, which requires the software update to be installed first, and if they are running smoothly.
???I just restarted then tried to open InDesign again and it let me download a java update that seems to have fixed it.
-
Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate
uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems? -
Macbook Pro shut off and won't turn on or charge?
I purchased my Macbook Pro August 1st 2012 at Best Buy and in April it shut off for no reason and it wouldn't charge. Apple replaced the battery cable and my Macbook worked for a couple of weeks, then in May same thing happened and Apple replaced the MLB, a couple days later the same thing happens and Apple replaces the Magsafe board with cable. Then a few days later specific keys on the keyboard stop working and Apple replaces the topcase with keyboard. Now 120 days later my Macbook Pro shuts off and won't charge for the 4th time. My Macbook is now out of warranty but I don't think I should pay since this is the 4th time my MacBook Pro shuts off for no reason and won't charge. Yes I already tried reseting the smc, still didn't work. What could be causing this and is there anyway Apple will cover this since is the 4th time it shuts off for no reason?
Call Apple Customer relation and explain your situation. Have your receipts for the work that was already preformed on it and ask them to replace it with a new unit.
Maybe you are looking for
-
Why to use xml ,sax api ,?
Dear friends 1> Can u please tell me why to use xml instead of html. When the developement is easy & fast in html, then why peoples are going for xml. 2> Please tell me role of SAX api in relevence to XML. 3>What is difference between DOM & SAX.? If
-
Tv episodes downloaded only playing first 30 seconds of my 42 min show. Help
Only the first 30 sec of my show are appearing in the counter upon playback
-
Airport 2nd Gen. Not Working; Worth Selling?
Hello, Recently upgraded to a 5th Generation that seems to be working better with modem. With 2nd Generation would have to unplug the router to connect to the internet several times daily. The firmware on the 2nd was updated. I was using 2.4ghz no
-
Best practices for adding link to Google Maps
Does anyone know anything about this? I want to link to several Google maps, but want to make sure I"m doing it the right way.
-
HT4623 can not load new IOS 7 update??
hi, i am trying to update my sons ipod touch to the new IOS 7 but it just keeps telling me that it has IOS 6.1.3 and is up to date?? how can i update this to the new version?? please help