Macbook pro (early 2008): Trackpad not working under Windows XP
My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
What shall i do now? Thank you for any advices.
since my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback
Similar Messages
-
My 15" MacBook Pro (early 2008) will not empty the trash can.The operation can’t be completed because an unexpected error occurred (error code -8003).
Just the Option key. Third from the left on the bottom row.
If that does not work, try the more elaborate steps described here:
http://reviews.cnet.com/8301-13727_7-20020873-263.html -
Macbook Pro Early (2008) will not turn on!
I have same problem with my macbook pro early (2008)
I think is unfair to have this problems in the "perfect world notebook"
I hope you can help me on this
Regars,
Carlos.
---- MrAngel Discussion-----
Ok. It looks like does not matter what model is but anyway here is my specs:
Macbook Pro 15'
Model: A1260,
2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
I would like you review the following posts:
http://discussions.apple.com/thread.jspa?messageID=10071744�
My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
http://discussions.apple.com/thread.jspa?messageID=10115278�
When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
http://discussions.apple.com/thread.jspa?messageID=10285598�
Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
The problem: Mac will not turn on.
1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
What I am planing to do:
1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
3. If it will be too expencive I gonna do DIY repair.
What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
Alekssince my mac is year and two months old (funny, two months and you are screwed).
Not if you had of purchased Apple Care. You would have been covered for 3 years.
What I would like to say to the Apple:
This is not the place as Apple does not come to these forums.
These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily. No one here works for Apple nor does Apple get involved in responding. Not even sure if they "lurk."
"Say" it here -
Product Feedback -
Macbook Pro Keyboard and Trackpad Not Working
few days ago, my Macbook Pro keyboard and trackpad started to act very oddly.
Basically, the keyboard doesn't work at all. I press down the keys, and all I get is that error message sound. The volume and display brightness keys seem to work, but almost all of the others just won't type anything. it-s like any key command or alt would stay pressed so when i click any key its trying to perform other function instead of just typing the letter. that-s probably the reason why the trackpad is also being very odd. When I first turn on the laptop, it seems to work as normal. I can click on an application, and it opens. But about one minute after the laptop first starts, it's like anywhere I click on the trackpad is a right-click. To open an application, I click like I normally would but instead of opening, a menu pops up as if I right-clicked. This happens in Finder and everywhere else that I've tested (for instance, I can't drag any Finder windows to different positions on the screen, because it acts as if I right-clicked instead of left-clicked), no matter whether I tap or click the trackpad.
I have reset my permissions, but that didn't fix anything. I verified the hard drive and it said there were no problems. A big issue is that I can't do anything that requires me to type in my password, since I can't type anything. I tried to reset the PRAM, but I don't think that it even registered me pressing the Command-Option-P-R keys when I booted up, so i just removed the battery for a while, i am not sure that did anything at all.
i tried to reinstall the os, i had mavericks and i installed a fresh mountain lion but the problem persists. i recently installed virtualbox and the keyboard seems to work right as long as i do not press any of the following keys command, alt, shift, etc.. if i press any of them same thing happens. i found that if i connect a usb keyboard everything works, but when i use the inbuilt keyboard the problem is back and a i have to connect disconnect the usb keyboard to be able to type or use the trackpad normally.
any help would be appreciated.
Thank you.No one cared enough to answer.
-
Hi Guys
I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light". -
Macbook Pro Keyboard and trackpad not working - SOLUTION!
Recently my Macbook Pro of 3 years suddenly stopped working -- or at least the keyboard and track pad did. I plugged in an external USB mouse and and keyboard and was able to use it but it was of course cumbersome. Thinking it was a software issue like the one that used to happen to my old G4 desktop I reinstalled the OS but this did nothing but cause a lot of extra work. After doing a lot of hours of research I finally began reading that people were finding a solution by replacing their "topcase" (the topcase includes the keyboard and trackpad). This is a $300 fix and not knowing if it would even work I didn't want to try it and be wrong!
To make a short story longer I found a website (which I have no affiliation with) called www.powerbookmedic.com who sold the cable only so you could do your own fix for about $35. They provide basic video but not an exact step by step to replace the actual cable -- just how to get to it.
I will warn you that the components are tiny and I recommend buying the Mac tool kit and pry tool to help you through it. Even so I broke a small component but luckily it still works. In the end I now have a working Macbook Pro and some extra tools for the next time. I stripped a screw so had to spend another $15 and buying anti-static tape, although not necessary might be a good idea. Total cost to me was about $60 with tools and everything.
It is not very hard to do the replacement but it is tricky because the components are so fragile and I did not have a video to properly describe how to open up connectors -- hence why I broke one. But if you are patient, savy and need to save a few bucks it can be done.
PS- I have rebuilt desktop Mac's before but this was the first time I ever opened up a laptop. I used the video's provided at http://www.powerbookmedic.com/ as much as allowed.
Good luck!No one cared enough to answer.
-
10.5.8 MacBook Pro: Keyboard and Trackpad Not Working
I have an older MacBook Pro (all metal, non-chiclet keyboard) and the trackpad and keyboard have recently become unresponsive. The power buttons work fine and when I plug in a mouse and keyboard via USB, I am able to use the computer-but that limits my mobile usage. Is there a driver update/download that I can get to fix this? Side note: I no longer have the old OS X disc that came with the computer. Thanks in advance for any help!
Hi s,
In some cases, the battery can interfere with a cable between it and the inside of the MBP, causing keyboard and/or trackpad issues. Shut down the MBP, disconnect the power adapter, remove the battery, take a piece of something semi-soft (like a paper napkin folded over a couple times), place it over the cable you see in the battery compartment, and tape it down. Replace the battery and see how things go. If this works, you'll eventually want to replace the keyboard/trackpad cable (about $25 if you can do the work yourself). Note that if you go to a repairshop, they usually want to replace the entire top case assembly, which is much more costly.
If the issue persists, shut down,disconnect the power adapter, remove the battery, connect the power adapter, boot the MBP and see if the issue persists without the battery in place (but remember to save a lot, because if the power adapter gets pulled out the MBP will immediately shut down and any unsaved work will be lost).
Also look at the battery to see if it has any signs of deformity/bulging, in which case do not use it again (it may be pushing on the keyboard/trackpad cable and causing the issue); it must be replaced. -
HT3964 macbook pro early 2008 does not respond to the power button
I bought a second hand mbp early 2009.
All seemed well when I tested it prior to buying.
But, now 2 days later, the mbp is completely dead.
In the past 2 days I had sudden power-downs (suddenly switching of completely).
First I thought it was the battery, which I overlooked when buying. But now I fear it is more serious!
It did work. And it worked like a charme. I even upgraded the os to mountain lion.
But now I cannot get it to work at all
Any help? Please...Shootist007 wrote:
Right if the Nvidia chip fails completely it takes the complete computer down with it. No start no sign of life.
If after reading the Apple arcticle I link to and if you did a little research on the failures you may of figured that out for yourself.
Google Baking a Apple Mac Logic board or Fixing MBP 2008 Nvidia chip failures.
You wrote:
"I say did, because I already swapped it.".
What does that mean, you lost me.
As for your comment on how bright I may be, I'm bright enough to know not to buy a 3 or 4 year old Mac notebook.
Good Luck.
I swapped de mb for another one. the person that sold it to me took it back.
contrary to most people I do not sneer at other people. My remark at the end is pure an observation. What you make of it, is your doing, not mine.
I buy a second hand mb simply because I need a portable, but cannot affort a new one (for the moment).
there is nothing wrong with a 3 year old mb, apart from that it is 3 years old. of course there is a higher risk of failure. that is (partly) why the price is lower.
keep cheerful and travel light. -
External isight not working with Macbook Pro early 2008
My external isight is not working with my Macbook Pro early 2008 (2.4 GHz, Intel Core 2 Duo, 6 GB RAM, OSX Lion). It goes warm when plugged into the firewire port but is not recognized in system prefs (lists as "unknown device" and also does not turn on (green light. I tried resetting PRAM and all the other stuff as suggested here but no luck. It used to work fine on a 1st generation Macbook and I remember that one of the first times I tried it with this machine here it turned on for a few secs (green light) but then it just simply stopped.
Unfortunately, I have no other firewire device to check the port.
Any ideas, dear community?Our (old) external Firewire iSights can be sensitive to dust, shock, vibration, humidity, and other environmental factors in storage. (I store my spare in its original plastic shipping case with a new desiccant pack on a solid shelf - never in a desk drawer or other container that moves.)
You have tried several good things and may be finding that your old iSight needs work.
Here are the alternatives I can offer. Consider any you have not tried in any order you like:
(1) You can try Apple's suggestions from http://support.apple.com/kb/HT2090
Test in more than one user account and with more than one Apple softwre application.
(2) My expanded suggestions here: http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
(3) Reset Firewire ports using the info from this old archived Apple article: http://web.archive.org/web/20090331211534/http://support.apple.com/kb/HT1317
(4) If you have no local Apple Authorized service Provider who can help you, other service options are here: http://www.apple.com/support/isight/service/
(5) Consider a new USB cam with current warranty such as one of these: http://www.mac-compatible-web-cam.com/
Message was edited by: EZ Jim -
HT3235 Will generic DVI to VGA adapter work with Macbook Pro (Early 2008 Model)??
I have a 15" MacBook Pro (Early 2008 model). I lost the Apple DVI to VGA adapter for use with my projector, and it appears this older model is no longer available. Will a generic DVI/VGA adapter, from Best Buy for example, work? I wasn't sure if there was anything specific to the Apple adapter? I am supposed to give a lecture in 2 days and can't find my adapter! Any help is greatly appreciated.
Yes it will, assuming that you do not have a display like the 30" Apple Cinema Display that requires dual-link DVI.
-
My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
Problem started after deleting parrell desktop and window7 ?
Please help?Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
Read C12 here. http://pondini.org/TM/Troubleshooting.html -
Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
I apologize if there's a similar thread out there, I couldnt find one. -Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
No it will not.
Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
If there is no backup of data, get that off the machine using a external boot drive.
To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
How to erase and install Snow Leopard 10.6
Install/upgrade RAM or storage drive in Mac's
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50 -
Won't power up -- 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261
I have a 17" MacBook Pro Early 2008 2.5GHz MB166LL/A MacBookPro4,1 Apple Model #A1261. I bought this used last year, and installed one of OWC's 1TB 2.5" Hybrid HD/SSD drives in it last January. No problems whatsoever until the past 2 weeks, when I started having intermittent black screens (NOT display sleep) -- sometimes the black screen would disappear by itself, sometimes I had to (Power button) shut down, and when I restarted, everything was OK. Until yesterday.
First let me note that, because I usually use the MacBook Pro in the same area in my house, I usually leave it plugged into the MagSafe power cube, and often just close the lid and put it to sleep, instead of going through start-up every time I need to access it. BTW, battery (NuPower) shows 5 solid green dots and does not seem to be a problem
Night before last, I shut down the MB Pro, and closed the lid. Yesterday, I opened up the MB Pro, and hit the power button. All I got was a brief, non-pulsing white light on the display-locking/“sleep light” button, and a sort of graunchy whisper from what sounded to me like the optical drive, NO screen activity whatsoever, and the “sleep light” went out within 3 or 4 seconds. Could hear NO HD spin-up sounds.
Tried everything I knew (not much), including disconnecting the MagSafe charger and removing the battery completely, letting it sit a few minutes, replacing battery and charger, and powering up. Same nothing, just another very brief whisper of activity from the optical drive. Being something of an “I’ll try anything, no matter how dumb it seems” idiot, I put a known, working, burned data CD-R in the optical drive. Removed the charger and battery again, waited, put everything back in. Tried to power up. Still nothing, same brief whisper from the optical drive, but the MB Pro would STILL not start up, the CD-R wouldn’t spin up OR eject, and I heard nothing from the hard drive, even with my ear ON the metal right over the drive.
My next “don’t-really-want-to-do-it” step is to remove the 1TB drive, replace it with the original 250GB drive, see if that works, and, as I have a “Newer Technology” Voyager S3 bare drive (works with both 2.5” and 3.5”) USB dock connected to my main Mac (a mid-2011 iMac, 2.7GHz Core i5, OS X 10.9.3), I’ll try using that to check the hybrid drive.
I’ve been a Mac-only user since 1989, and somehow this doesn’t seem like a drive problem. I’ve tried every OS X keyboard shortcut on the “OS X keyboard shortcuts” page, and the “sleep light” always comes on for a couple seconds, then goes out, the screen never even shows a flicker of life, and the HD NEVER spins up.
Can the forum please clue me in with any tricks I haven’t tried yet?
Thanks
Bart BrownThanks for the quick response. However, none of the following have worked:
Have you tried SMC and PRAM resets?
As usual, "sleep" light briefly illuminated -- 2-4 seconds -- then went out. No startup, no chime(s), no screen, no keyboard illumination, no HD spin-up.
Also try an Apple Hardware Test.
Same as above. Nada. "Mac NoteBook and Desktop computers shipping with OS X 10.7 or later have a partition on the hard drive or flash storage that contains AHT" -- since I can't get the drive to spin up, I can't access that partition... or anything else.
You may need the #2 installation disk.
Well, there I have TWO problems:
One is that I bought this MBPro on eBay, and received no disks -- it came with OS X 10.9.x installed (and is now at OS X 10.9.3). Is there any way to get “retail” install disks that will work with this MacBook Pro?
Second is that there's a data CD in the optical drive. Because the MBPro won't boot, I can't get the data CD out even if I had the 2nd Install DVD. Any way I can get this data CD out -- hatpin, barbecue skewer, fencing foil, sledgehammer?
I talked with OWC, from whom I bought the hybrid Seagate HDD/SSD 1TB drive last November. We tried a few ideas he had — mostly the same as those suggested by “Oglethorpe” (no relation to “Ogie” Oglethorpe in “Slapshot,” I hope!) — none of which worked, as I’ve already indicated above.
My last-ditch effort-of-desperation is to remove the hybrid Seagate HDD/SSD 1TB drive, and put in the original 250GB drive (never throw away a good drive!), and see if the MBPro returns from the dead. I will also put the hybrid Seagate HDD/SSD 1TB bare drive into my Newer Technologies Voyager S3 bare-drive dock, which takes 2.5” and 3.5” drives, and see if there’s a problem with the hybrid Seagate HDD/SSD 1TB drive. While no longer under warranty with OWC/MacSales, it IS still under a 2-year warranty with Seagate.
Any other suggestions gladly entertained.
Thanks again.
Bart Brown -
My Macbook Pro (early 2008) won't boot, then booted, now won't boot again.
Hey all,
Summary:
My GF's Macbook Pro (Early 2008, non-unibody I believe) "died" earlier this year without notice or a cause for why, then it worked months later, then it didn't again.
Symptoms:
It stopped booting, with the only signs of life are:
The annoying boot sound that you hear right-away, like a winding sound. "Weeeeah woooo"
A fan turns on immediately after the sound.
The front light (on the open button) is solid.
The battery will light up and show how much juice is left.
The only thing to do from here is to hold down the power for 10 seconds.
Don't worry, my story gets more interesting...
Now, I had another computer and my GF didn't need her macbook seriously for a while, so I didn't research the problem or how to fix it, until last week. Perusing the various help forums and communities, I came across the reset SMC suggestion, so I decided to try a few things on Apple's SMC reset page.
I tried a couple things, including taking the battery out, and LOW AND BEHOLD: IT CAME ON, like nothing happened! The screen was fine, the performance was fine, it updated (to the new Safari and iTunes, as an example) fine, and it restarted fine multiple times. One of the main reasons I wanted to get it working was to save some family pictures we had saved, so I started uploading the images to an image cloud site. I'm sending them at full-res so it takes a while and I go to sleep around 2 am so I'm not too late into the office in the morn. When I wake up, I go to check the image upload progress and the laptop is Off. I figure it just went into standby after finishing, so I hit the power button...
And it doesn't boot again. It's back to the same issue as before. I try doing what I did last time, then resetting the SMC, but nothing has worked this time.
Any ideas? It's out of warranty of course, which is why I'm here.
Thanks in advance!Since no one else is answering, I’ll jump in.
Your story is interesting indeed. I’m not sure I can help you fix the Mac but it sounds like there is a reasonable chance of recovering the data.
I assume it came with installation disks. Will it boot from them? If so run Disk Utility from there and try to repair the system disk.
For the hardware problems on your Mac it is time to take it to Genius Bar at an Apple store for a free diagnosis and estimate of repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .
It could be your disk failing but it sounds more like flakey electronics in the system. Let’s assume is is the system board until a Genius tells you otherwise. If so, you can simply put the working system disk in an external enclosure, mount that on your other Mac and copy the data. Here is a source for the inexpensive hardware you would need:
Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
SATA enclosure: http://eshop.macsales.com/item/OWC/ES2.5BPU2W/
There are multiple directions to go from here. Let me know what happens when you try theses first options. -
Macbook Pro Early 2008 running slow, hot even with upgrades - what to do?
Hello!
Specs:
I have a Macbook Pro Early 2008 (Model A1260). I have upgraded both the RAM (from 2GB to 4GB DDR2 667) and the HDD (from the factory installed 200GB 5400 to a 750GB 5400).
Previous to this, I was running Leopard, and upgraded to Snow Leopard then Lion as my specs match the requirements. On the old/original HDD and RAM, All was good for about 3 months, and in the past month or two, I began to have performance issues, so after trying everything (including a clean wipe & reinstall using Lion Recovery) and doing a lot of reading in these forums and others, I decided/hoped the problem would be remedied with some upgrades (hence the new HDD & RAM upgrades).
This has helped to the point where I can now run safari without having to force reload or having the whole computer freeze (although that has now happened once), but I wasn't even able to load a youtube video.
CPU Usage:
I checked the activity monitor and I'm getting a pretty constant CPU usage of about 50% (even with no other apps running):
(The above is with just Safari, Dropbox, smcFanControl & Activity monitor)
My fans are engaged constantly (smcFanControl has my computer at 75º-80ºC at any given time that it's on).
The CPU usage & temps seems high - but I am not sure haven't found very good answers online.
Things I've Tried (Post RAM & HDD Upgrades):
I tried to perform a hardware test (holding D before the gray screen) - and both times I tried it, it did not work, as in Lion just loaded as normal.
Ran repair permissions - and some things were repaired.
Tried to run Verify Disk - no dice - the computer froze and I had to use the power button to shut it off & restart
Reset the SMC per apple support instructions - had no effect on the fans or heat (though I'm still not sure if this is a real problem or not!)
What I'm looking for :
Any ideas on what could be going on - is this just par for the course on older models running lion, or is there something more to be done?
I am really hoping to squeeze a few more years of service out of this machine! Thanks for any advice you can give me!Incase you are using your MBP like a laptop (which it is NOT)...................
According to the user manual it states in part:
"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
MacBook Pro: Care, Use, and Safety Information
"Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."
Maybe you are looking for
-
I'm endlessly frustrated with iTunes Cloud syncing, something that was supposed to make lenjoying my music easier. I routinely find that, though itunes and podcasts have been split, iTunes arbitrairily removes music files or in progress podcast in fa
-
How I can delete a row using a simple query?
SZSLIFE_SPRIDEN_PIDM SZSLIFE_SGBSTDN_TERM_CODE_EFF SZSLIFE_SLRRASG_BLDG_CODE SZSLIFE_SLRRASG_ROOM_NUMBER SZSLIFE_SLRRASG_BEGIN_DATE SZSLIFE_SLRRASG_END_DATE 48547 199890 48547 199990
-
Adding Disclaimer text to standard web dynpro screens in ESS
Hi, I need to add disclaimer text to the standard web dynpro screens of ESS. The disclaimer text is the same for all screens and there are around 20 different screens where I need to put the same disclaimer text on. Can anybody suggest me the best wa
-
Greek Letters, Symbols for College Fraternities and Sororites
Does anyone know how to access a palette of characters that has Greek letters or symbols for Greek Fraternities and Sororities? I am working on a project and I need to have their letters on the screen. Thanks! Examples: Delta looks like a triangle Om
-
[SOLVED] Timezones UTC and EDT all mixed up
I have the following settings in rc.conf: HARDWARECLOCK="localtime" TIMEZONE="Eastern US" The clock in the lower right panel does indeed indicate the time in EDT. However, as a screensaver I use the big analog clock and I also put an analog clock in