MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen
Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
A little more about my MacBook Pro:
Early 2011 Model ID: MacBookPro8,2
OS: 10.8.2 Mountain Lion
CPU: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
Any suggestions, tips, ideas, etc. to get this working is appreciated!
Rudegar wrote:
your macbook dont support airplay mirror
He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring.
Similar Messages
-
how do I airplay from macbook pro retina 13" through apple tv 2nd generation
i went to update software on the apple tv and it said it was up to date. what is the latest sottware that apple tv should have to be compatible with macbook pro retina?
-
How to fix magsafe port Macbook Pro early 2011
For a while I struggled to charge my Macbook Pro, so I decided to buy a new charger. It worked fine for a couple weeks but now it has started to do the same thing. I have to spend like maybe 3-4 min wiggling the charger until it finally starts, and then I have to keep it perfectly still for it to charge. Recently my macbook stopped charging completely. The magsafe port looks very burned (its kind of black). Also the area around the magsafe port is always HOT, even before the charging issues. How can fix this issue? Is this common for Macbook Pro early 2011 13" ? I don't have apple coverage at this time.
Sean, see if these troubleshooting tips help:Apple Portables: Troubleshooting MagSafe adapters if not, take it to an Apple store genius bar and have the techs check it out.
-
I have a macbook pro early 2011, and I can't use AirPlay like it says I can. I do not have the "show mirror displays" or whatever. What the heck
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
iTunes- Troubleshooting AirPlay and AirPlay Mirroring
iTunes- Using AirPlay
Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay
Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs that do not support Airplay and mirroring.
Other solutions are the Air Parrot, StreamToMe, and AirServer. -
I have a Macbook Pro early 2011. i don't have AirPlay on my computer. How can I get it. I have read that early 2011 should have the AirPlay option. Any ideas please.
Hi All,
I need your expert advice to proceed. I bought apple TV and it works fine with my iPad and iPhones also fine with itune of my Mac Book Pro BUT I am not seeing setting which says "Airplay Mirroring" in system preference -> Display at all.
I checked my mac serial number and it shows the model as below. As far as I understood this feature should be there from 2011 onwards.
MacBook Pro (13-inch, Late 2011)
Software Mac OS X Lion 10.7.5 (11G63b)
Please suggest!!
Thanks and Regards -
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?
bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine -
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?
if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install
-
My Macbook Pro (Early 2011) is freezing nearly everyday?
Hi
My Macbook Pro (Early 2011, purchased at launch) is freezing nearly everyday. This problem exists for a long time (Since purchase). Whenever I let my macbook turned on, it freezes after some time. (Quite often in the night). I do not have any hardware hungry applications running. The freezes occure at normal usage. The only way to solve the freez is a complete hardreset.
I do not have any idear why this problem occures.So, here is the copy of the console...
the freeze must be happened at 06:51
31.08.11 06:46:57,734 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34817]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:46:57,735 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34817]) Exited with code: 1
31.08.11 06:46:57,735 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:48:37,755 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34827]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:48:37,756 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34827]) Exited with code: 1
31.08.11 06:48:37,756 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:49:20,362 [0x0-0xb00b].jDownloader: PreDupeChecked: no mirror found!
31.08.11 06:50:17,775 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34838]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:50:17,776 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34838]) Exited with code: 1
31.08.11 06:50:17,776 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34848]) posix_spawn("/Applications/ZTE Connection Manager.app/Contents/Resources/Mac_SwapperDemon.app/Contents/MacOS/Mac_SwapperD emon", ...): No such file or directory
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist[34848]) Exited with code: 1
31.08.11 06:51:57,797 com.apple.launchd.peruser.501: (cn.com.zte.usbswapper.plist) Throttling respawn: Will start in 10 seconds
31.08.11 09:56:31,000 bootlog: BOOT_TIME 1314777391 0
31.08.11 09:56:50,644 fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (299106 18 310157)
31.08.11 09:56:51,000 kernel: PMAP: PCID enabled
31.08.11 09:56:51,000 kernel: Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
31.08.11 09:56:51,000 kernel: vm_page_bootstrap: 2003326 free pages and 77442 wired pages
31.08.11 09:56:51,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
31.08.11 09:56:51,000 kernel: zone leak detection enabled
31.08.11 09:56:51,000 kernel: standard timeslicing quantum is 10000 us
31.08.11 09:56:51,000 kernel: mig_table_max_displ = 72
31.08.11 09:56:51,000 kernel: TSC Deadline Timer supported and enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
31.08.11 09:56:51,000 kernel: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for TMSafetyNet
31.08.11 09:56:51,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for Sandbox
31.08.11 09:56:51,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
31.08.11 09:56:51,000 kernel: calling mpo_policy_init for Quarantine
31.08.11 09:56:51,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
31.08.11 09:56:51,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
31.08.11 09:56:51,000 kernel: The Regents of the University of California. All rights reserved.
31.08.11 09:56:51,000 kernel: MAC Framework successfully initialized
31.08.11 09:56:51,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
31.08.11 09:56:51,000 kernel: IOAPIC: Version 0x20 Vectors 64:87
31.08.11 09:56:51,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
31.08.11 09:56:51,000 kernel: PFM64 0xf10000000, 0xf0000000
31.08.11 09:56:51,000 kernel: [ PCI configuration begin ]
31.08.11 09:56:51,000 kernel: AppleIntelCPUPowerManagement: Turbo Ratios 6689
31.08.11 09:56:51,000 kernel: AppleIntelCPUPowerManagement: (built 13:08:12 Jun 18 2011) initialization complete
31.08.11 09:56:51,000 kernel: console relocated to 0xf10010000
31.08.11 09:56:51,000 kernel: PCI configuration changed (bridge=16 device=5 cardbus=0)
31.08.11 09:56:51,000 kernel: [ PCI configuration end, bridges 12 devices 18 ]
31.08.11 09:56:51,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe8919c2; max speed s800. -
Hi to all.
I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.
If anyone has solved such ploblem, please let me know.In reply to my own post have to say appologies to Apple whose Thunderbold port I used to blame.
Shame on me)
So, what was my problem?
Guess what?
Manhattan DisplayPort to HDMI Adapter !
The point is it's actually do only what it said to do, converts DP to HDMI.
But I for some reason thought it can be used vice versa, to be HDMI to DP converter))
I was wrong.
I bought new one HDMI to DVI adapter and now I HAVE external display!
Thunderbolt works like a charm.
So I'm very satisfied now. -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggYou should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro -
Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
GreggI have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?
-
Windows 8 on Macbook Pro (early 2011)
Hi,
I want to install Windows 8 on my macbook pro (early 2011) running the new Mavericks 10.9, but im stucked at the formating process when installing windows 8.
So first I go into boot camp and partition my disk as it guides me to. When It has finished and rebooted I'll hold the alt-option to select the windows disc (efi-boot). When I choose the language, typed the activationcode and all that, it wants me to format the partition i made, and thats when I got stucked. When i try to format it, it says:
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GTP disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I downloaded my windows from dreamsparks microsoft, and im pretty sure it is the full version (not the upgrade). The file size is 3.6GB. I don't know if that can tell which version of windows it is.
I don't know what to do about this problem, I need help please!
Thanksbootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine -
Macbook pro (early 2011) won't boot after sleep. Black screen with chime
I put my macbook pro early 2011 (Quad, 8 Gb RAM, 2 x SSD-disks, external 27" LED-screen) into sleep mode a couple of days ago. Everything was fine then.
However, the morning after it wouldn't wake up - this is the bootup process:
- Black screen
- Chime
- Still black screen, nothing happens.
So I've tried resetting NVRAM, SMC etc - no luck. Even tried the "Powerbutton" + "S" + Enter but to no avail.So I immediately began dd:ing my SSD-disk before trying anything else, figured it might be some preboot-corruption of some sort since I'm running FileVault2 with full AES-encryption.
Now, the problem (after some troubleshooting) doesn't seem to be disk-oriented. Remember the black screen? I've tried pulling the SATA-cables one by one on the motherboard of the Macbook pro and discovered that when I pulled the cable which reaches over the optical device (just above the SATA-cable for the optical device) then I get a white screen and I'm able to get as far as boot-option, or even disk repair (if I run my SSD-disk over USB and without any cables (three of them) attacked to the motherboard).
So since nothing works when I have disks connected or that third cable (some kind of logic board bridge? Reaches through the screen over to the other side of the mother board).
Also worth noting is that I was running out of free disk-space on my system disk. The disk is 250 Gb and free space was about 5-10 Gb (less than 5%). I also make the macbook pro dump contents of memory to disk (since my disk is encrypted it resides safely there).
So, my fear is that Apple hasn't used A-grade controllers for the disk drives (I've had drive corruption before, a Crucial 6 GB/s drive trashed less than a week before a presentation) and doesn't handle "unexpected events" nor signal/noise ratio very well. Maybe free space on disk was less than the 8 Gb needed to dump RAM (shouldn't have needed the full 8 Gb though) and this caused some kind of panic overwrite which trashed the controller?
Anyways, I've attached an image of the motherboard and I am wondering - what does the top cable which reaches over the optical drive do? Is it connected to the logic-board?sspott wrote:
** The volume Macintosh HD could not be repaired.
Looks to me like a fatal error on the hard disk. IMHO, the only solution is to boot from an external device, reformat the hard drive, and restore from backup. If you don't have a backup, you're in trouble. Boot from the external device, try to mount the int'l drive, and, if successful, back up as much as possible. Also, try running Disk Utility—it may be possible to fix it while booted from a different device, thought I wouldn't bank on it. At any rate, make sure to run an AHT afterwards, to check for possible hardware issues with the drive.
If the machine is still covered by AppleCare, take it to the store by all means. But they won't try to recover anything from the int'l drive, just check it, erase it if they don't find hardware issues, and re-install a fresh copy of the OS.
That's why you should always have at least 1 up-to-date backup (2, with one kept off-site, is better). -
Macbook Pro early-2011 crashing/locking-up
Hello,
My MacBook Pro (early-2011 model 15") has been locking up and crashing lately. It was recently upgraded to Mavericks OSX.This has happened only a handful of randomn times over the past two months. I don't think it has to do with the OS version because it did this a couple months ago as stated when I had Lion, and also ML. However, in the past 24 hours i have locked up around 5 times and crashed at 3 times. I've attached the crash report below from the latest crash this morning. I use one usb port to connect to a Dell monitor using DisplayLink adapter, and the other usb port goes to a 4-port usb hub that has my wired keyboard, mouse, and phones that I test with plugged into. The mini displayport goes to another Dell monitor. Can anyone help me determine the issue? Does it look to you like the RAM has been corrupted and needs replacing perhaps? Or maybe it is this usb hub causing memory crashes from having so much stuff plugged into it? Log below:
Anonymous UUID: A06D9E0B-752F-521A-C64F-89E5D1C93276
Fri Nov 1 09:51:46 2013
Machine-check capabilities 0x0000000000000c09:
family: 6 model: 42 stepping: 7 microcode: 40
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
threshold-based error status present
extended corrected memory error handling present
Processor 0: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
Package 0 logged:
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 1: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 2: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 3: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 4: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 5: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 6: machine-check status 0x0000000000000005:
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32_MC0_STATUS(0x401): 0x0000000000000000 invalid
IA32_MC1_STATUS(0x405): 0x0980000000000000 invalid
IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
IA32_MC3_STATUS(0x40d): 0x0000000000000000 invalid
IA32_MC4_STATUS(0x411): 0x0000000000000000 invalid
IA32_MC5_STATUS(0x415): 0x0020000000000000 invalid
IA32_MC6_STATUS(0x419): 0x0020000000000000 invalid
IA32_MC7_STATUS(0x41d): 0xbe2000000001117a valid
MCA error code: 0x117a
Model specific error code: 0x0001
Other information: 0x00000000
Threshold-based status: Undefined
Status bits:
Processor context corrupt
ADDR register valid
MISC register valid
Error enabled
Uncorrected error
IA32_MC7_ADDR(0x41e): 0x000000004dc98080
IA32_MC7_MISC(0x41f): 0x000000b72e020086
IA32_MC8_STATUS(0x421): 0x0020000000000000 invalid
Processor 7: machine-check status 0x000
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 8 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: KINGSTON SV300S37A240G, 240.06 GB
Serial ATA Device: MATSHITADVD-R UJ-8A8
USB Device: Hub
USB Device: Plugable UGA-2K-A
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: Hub
USB Device: G500
USB Device: Multimedia keyboard
USB Device: Hub
USB Device: XT912
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1Hi Will-H,
Thanks for using Apple Support Communities. It sounds like more isolation might be needed to rule some things out. I would recommend this article:
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
Restart your Mac in safe mode.Start up in safe mode
Use Disk Utility to repair your computer’s internal disk.
Cheers,
- Ari -
Will a Macbook pro early 2011 installation disc work on a 2007 or 2008 Macbook pro 15
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button. He doesnt know what version it is and I forgot to write down the model number of it(Ill update May 16 at 10am PST). I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up. He can not find his installation disc that came with the computer. I have mine but its for Model # A1278 I think its snow leopard. Will the installation disc and application disc run successfully on my collegue's 2007 or 2008 Macbook pro?
I apologize if there's a similar thread out there, I couldnt find one. -Will a MacBook Pro Early 2011 installation disc work on a 2007 or 2008 MacBook Pro 15?
No it will not.
Machine specific gray/back disks are for one model of Mac only as they only contain hardware drivers for that model, not previous ones.
The 10.6.3 white Snow Leopard retail disk will work and it's available from Apple online for a small charge.
My collegue's 2007 or 2008 Macbook pro 15 inch keeps getting stuck on the apple load up screen everytime he hits the power button.
I tried safe mode, it worked but after the loading bar gets close to 1/2 it freezes up.
This is indicative of a problem with the boot drive and the file structure retaining data on the drive.
The progress bar progressing and stopping means the fsck drive repair is failing, likley the drive incurred head shock damage at that point.
The boot drive itself is likely fine and the problem can be resolved but the disks are going to be required if it's running Snow Leopard.
First get the disks, then attempt Disk Utility > Repair Disk and check the SMART status if the drive is still good.
If there is no backup of data, get that off the machine using a external boot drive.
To fix that problem of a bad sectors, unfortutly the entire drive will need to be Zero Erased (security option > zero all data) using Disk Uility while c or option/alt key booted from the 10.6 disks (using a wired or built in keyboard), it's the only way.
This means all programs, files (remaining) and OS X will be removed in the process. You could replace the drive also.
Step by Step to fix your Mac
Create a data recovery/undelete external boot drive
How to erase and install Snow Leopard 10.6
Install/upgrade RAM or storage drive in Mac's
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50
Maybe you are looking for
-
Lacie Electron 22 blue III connection mac mini
Hi, I'm trying to connect a Lacie Electron 22 Blue III CRT monitor to a new Mac Mini... I have the adaptor (HDMI to VGA), so monitor appear completely black... no signal. I connected the Mac Mini to an HDMI TV, and I selected a 1024x768 resolution..
-
Hello , I need to know where can i find name of table with all my errors when i run a deploy mapping. I found the table wb_rt_error but in this table i see just a execute error. Thanks
-
What can I do
-
HT1462 i wanna take picture with built in camera by timer which application you can offer me please
i wanna take picture with built in camera by timer which application you can offer me please
-
Hello to everybody!!! I have a IBM TS3100 tape library with the OSB 10.2.0.2. This library has 23 slots for tape midia. So I putty five midias lto 3 ( slot 1 to 5). So when I trie to start a backup schedule the OSB web interface show the following me