Macbook pro EFI firmware 2.7 after upgrade memory utilization high

Hi,
My machine is locking under specific conditions:
Hardware Overview:
Model Name:
MacBook Pro
Model Identifier:
MacBookPro8,2
Processor Name:
Intel Core i7
Processor Speed:
2.4 GHz
Number of Processors:
1
Total Number of Cores:
4
L2 Cache (per Core):
256 KB
L3 Cache:
6 MB
Memory:
8 GB
Boot ROM Version:
MBP81.0047.B27
SMC Version (system):
1.69f3
System Version:
Mac OS X 10.7.3 (11D50b)
Kernel Version:
Darwin 11.3.0
Boot Volume:
Macintosh HD
After I have updated the EFI firmware to version 2.7 last week, I noticed that my memory utilization has gotten higher. Has anyone experience that?
Before the upgrade, even when I opened my Fusion VMware, I will still have at least 1-2GB available left but now I only left with 200MB available.
How do I troubleshoot? Regret that I upgraded the firmware.

I have not notice that at all. I also use Fusion with XP, Vista, 7 and Mint and don't see any more RAM being used by OS X or the VMs.

Similar Messages

Slow Booting time after installing MacBook Pro EFI Firmware Update 2.0 on 13 Inches Mac 2010 model

I'm experiencing a slow boot time after my computer installed a MacBook Pro EFI Firmware Update 2.0 itself on 13 Inches 2010 model, how to downgrade or fix it?
My computer is starting 2 times slower then it should be, why Apple done this to me?
Please help who really know somthing about Macs.

I have the same problem, especially when I open my laptop from sleep. It takes at least 2 minutes for the computer Internet connection to work.
Never had that problem prior to the last firmware update 2.7.
Is there a way to revert back to 2.6?

My Macbook Pro has become super slow after upgrading to 10.9.2. can anyone help please?

My Macbook pro has slowed down drastically after upgrading to 10.9.2. It has become so slow that i can hardly use it. I did an etrcheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: 1024 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 0:19:10
Disk Information:
          APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (356.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
Launch Agents:
          [System] com.hp.devicemonitor.plist 3rd-Party support link
          [System] com.hp.messagecenter.launcher.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Dropbox
          AdobeResourceSynchronizer
Internet Plug-ins:
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
Safari Extensions:
          Adblock Plus: Version: 1.7.4.1135
          Ebay Shopping Assistant: Version: 1.1
          Amazon Shopping Assistant: Version: 1.1
          Slick Savings: Version: 1.0
          Searchme: Version: 1.3
          AdBlock: Version: 2.6.18
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
Old Applications:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              29%          Safari
              16%          com.apple.WebKit.WebContent
               5%          PluginProcess
               4%          WindowServer
               3%          com.apple.WebKit.Networking
Top Processes by Memory:
          289 MB          Safari
          131 MB          com.apple.IconServicesAgent
          82 MB          com.apple.WebKit.WebContent
          82 MB          mds_stores
          66 MB          Finder
Virtual Memory Information:
          721 MB          Free RAM
          1.62 GB          Active RAM
          1.05 GB          Inactive RAM
          636 MB          Wired RAM
          1.18 GB          Page-ins
          0 B          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|filezilla|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

MacBook Pro EFI Firmware Update 2.0 will not install.

Hi
The latest MacBook Pro EFI Firmware Update 2.0 will not install.
It runs and I restart my Mac but when I search for more updates it appears as a required update again.
Anyone know why this may be?

I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
I went to check the software update window after the update and restart completed and SUCCESSFUL.
I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
Thanks ALL.......... Happy Mac ing

MacBook Pro EFI Firmware Update 2.0

Hello,
I receive regular updates of the "MacBook Pro EFI Firmware Update 2.0" software. Each time I download, restart and let the update install. Each time it says update istalled succesfully... Yet each time I get the upgrade notice.
Worse now, iTunes says there is a software upgrade. But when I want to download it again I get the EFI upgrade announcement, but not the iTunes upgrade downloaded...
I've done a complete maintenance run, repair, rebuild, etc... but same results.
Thanks for any hint on what may be going wrong or how I can fix this.

I copied the version number from http://support.apple.com/kb/DL1331. That may be a misprint or typo on Apple's part. I'm posting a message asking about that in a special forum available only to level 4 or 5 users that sometimes gets replies from the folks that maintain those articles.
If I hear anything that confirms that, I will post back here, but for now I think it is safe to assume "B05" is correct.

MacBook Pro EFI Firmware Update 1.5.1 Multiple Times

for about 6 months or longer now I keep getting the same software update every few weeks on my Macbook pro. it's 1.5.1. i've probably installed it 5+ times now, and now I just uncheck the box and do the other updates. how do i get rid of this darn thing, since i have already done it? now it's just starting to annoy me.

Hi chuck,
Head to your "Utilities" folder and you will find that Software update has installed an application called "MacBook Pro EFI Firmware Update"
You should first restart your computer, disconnect any peripherals , and then run the application, following the instructions carefully along the way.
For safety reasons Software update doesn't actually install firmware updates like this itself . Instead it installs an installer. While I can understand the desire for safety, I reckon Apple could have been a bit better with the instructions on this one, as it is not at all apparent that this second step is required after running Software update to actually install the new firmware.
You aren't alone on this one. I've seen many, many posts here from people who haven't known that the second step was necessary and, accordingly, keep on getting new downloads of the installer from SU.
Cheers
Rod
Cheers
Rod

MacBook Pro EFI Firmware Update 2.7 broken?

I'm trying to run the EFI update on my new 13" Macbook Pro but keep getting a message it's not for my machine.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,1
Boot ROM Version:          MBP81.0047.B26
SMC Version (system):          1.68f98
Any ideas as to why EFI update will not run? The update is suppose to update to MBP81.0047.B27.
Thanks

What are you talking about, wjosten? First, he said in his original post that he had an EARLY 2011 MacBook Pro. Those WERE shipped with Snow Leopard. I have one. Second, I have the same machine, still running Snow Leopard, and Apple Update has notified me to Install MacBook Pro EFI Firmware Update 2.7.
So wjosten, are you saying that Apple Update is defective, it's wrong, and doesn't know what it's doing?
UPDATE a few minutes later ---
Guess you ARE right, wjosten, and it's Apple Update that stupid and dangerous.
According to Apple Support http://support.apple.com/kb/DL1499
   System Requirements are for
OS X Lion 10.7.3 or later!
I wonder how many MacBook Pro 2011 users are getting screwed by Apple this time.
Fortunately, I did not do this update before searching the web for warnings after I had a pervious glitch caused by a firmware update.
This is crazy!

MacBook Pro EFI Firmware Update 1.5.1

Just seen this as available from the software update process on my MBP.
has anyone hand any problems with MacBook Pro EFI Firmware Update 1.5.1 updates?
thanks!

I believe it's been traced to the video card not properly initializing after sleep. It normally happens to me when I have USB peripherals attached (Such as my iPhone for charging).
After sleep the screen simply won't turn on. You can hear the volume adjusting, even music or something playing on the computer (As if it's running normally) but the screen just stays black. Sometimes it will flash on and then turn off.
The only solution I've found is to hard reboot the computer.

MacBook Pro EFI Firmware Update 1.5 (MBP21.00A5.B08 or MBP31.0070.B07)

Everytime I check for updates I am notified that MacBook Pro EFI Firmware Update 1.5 (MBP21.00A5.B08 or MBP31.0070.B07) needs to be installed...I have installed it a number of times (at least 5 times). Even after restarting the machine when I check for updates it says the same thing MacBook Pro EFI Firmware Update 1.5
The instructions are simple...I followed them completely.
WHY DOES THIS KEEP REPEATING!?!?
--bill

Hi Bill (and others).
While Software Update will download and install the Firmware Update software it doesn't actually run it. (I presume this is a safety measure).
Have a look inside your "Utilities" folder and you should find a little app called "MacBook Pro EFI Firmware Update"
Quit all other open apps and then run "MacBook Pro EFI Firmware Update". It will walk you through the rest of the process.
Until you do this Software Update will keep on saying you don't have it installed.
The instructions for getting this firmware update to "take" are definitely not up to the usual Apple standard, I'm afraid.
Cheers
Rod

MacBook Pro EFI Firmware Update 1.5.1 messed up my laptop

Software update just told me to install MacBook Pro EFI Firmware Update 1.5.1 a few minutes ago, and I followed the directions, having no idea what it was supposed to be doing to my computer. I hit "Shut Down", then held down the power button until I heard the beep. After the beep, the screen stayed black and the LED light just stayed constant. Then I turned the computer off using the start button again, and tried to turn it on. The hard drive or CD drive started to click rhythmically and the computer did nothing. The screen stayed black.
I then tried to restore the previous firmware, but that doesn't work. It said to hold the button until the lights flash fast, then slow, then to insert the restoration CD, which I did. It buzzed like it was going to start up, then did nothing and I got no progress screen. It still just sits there black with that power light on. Anyone got any ideas other that going to a Genius and paying hundreds of dollars?
Message was edited by: Cathy821

I followed the EFI instructions exactly as it stated and had a major problem.
Basically my problem was that the EFI did not completely successfully. It left the system in a half updated state. Unfortunately, they had to replace my entire system board. I have Apple Care so it was replaced at no charge. I originally called Apple Support and they had me try the usual things like restoration cd, reset PRAM, reset NVRAM, etc. Nothing worked. I brought it down to my local Apple store but they more or less do the same thing. They had to send it out to be fixed. Sorry, but it sounds like you're in the same boat.

Macbook pro EFI firmware Update 1.4 won't work, neither will software

I got two probs, not sure how related they are.
#1 is that I can't successfully do the macbook pro EFI firmware Update 1.4. My computer was bootcamped and kept restarting in windows - thus the update was not completed - the completion bar would pop up for an instant - i could not see if it had completed, i don't think so... and then it would flash back to black, and restart again. Upon restart the firmware update was still there as needing to be updated.
I've now taken bootcamp off and restored a single drive. It's doing the same thing and hasn't updated.
#2 is that DVD studio pro will not boot anymore after it has been working with no problems for over a year. Nor will Motion run although it has never worked. I have tried reinstalling multiple times and just today went to delete the preferences. No luck.
Any suggestions or better yet, solution, I'm ever so grateful.
Cheers
-k

I have the same problem. It's also important to note that, in my case, I'm running 10.7.2 (11C74), but it's a firmware update, so it shouldn't really matter if I'm running a beta version of Lion, should it?

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
This will allow you to simply type “airport” in the terminal window to execute the command.
Type airport –s
This will display all the networks in your area and what channel they are broadcasting on.
3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
4.) Boot your Mac into safe mode by holding down the shift key while booting.
5.) Open System Preferences and Click on Network.
6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
7.) Create a new location by clicking the + and give it a new name.
8.) Delete the old location by clicking on the old locations name and click the – to remove.
9.) Reboot
10.) Open System Preference and click on Network.
11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
12.) Drag Airport to the top of the list of devices then click Ok.
Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
13.) Click on Advanced under Network.
14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
16.) Click on the drop down for Configure IPv6 and change it to Off.
17.) Next click on the DNS tab at the top.
18.) Click the + to add a DNS Record.
To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
Then Type cat /etc/resolv.conf
(There is a space between cat and /. Without it you’ll get no such file or directory.)
This should return two addresses. Your ISP’s DNS Servers.
19.) Add both records to the DNS and click Ok.
20.) Click Ok then under Network Click Ok.
21.) Reboot router then Mac
22.) Fixed my connection issue
The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
Let me know if this helps or if you have any questions.
Best of luck.
Message was edited by: erockdabass
Message was edited by: erockdabass

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

My macbook pro is running really slow after upgrade to Mavericks

my macbook pro is running really slow after upgrading to Mavericks....any ideas?

OS X Mavericks: If your Mac runs slowly
The above link is not very useful, so if it doesn't help read on.
There are many potential reasons that a Mac may be running slower than expected, but more information is required to begin troubleshooting, much more.
Back up your documents and everything else important to you before proceeding. It is premature to conclude your hard disk is failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Macbook pro EFI firmware 2.7 after upgrade memory utilization high

Similar Messages

Maybe you are looking for