Macbook Pro ejecting a dvd with data files

Trying to get jpeg files off of a dvd but every time I put the dvd in it keeps getting ejected. Why is this happening? Thanks

http://support.apple.com/kb/HT2801

Similar Messages

Login screen on MacBook Pro Retina (Late 2013) with enabled File Vault is extremely slow (suttering)

Hi
I have a MacBook Pro Retina (Late 2013) with enabled File Vault on OS X Mavericks. When I boot up the mac freshly it takes quite long to get to the initial login screen (which as I understand is a pre-boot login provided by the recovery partition if File Vault is enabled). However, what is even more bothering me is that once I get to this screen, the whole UI is behaving extremely slow. The mouse makes jumps of a few inches on the screen and the animations (e.g. if you click a user and then an animation shows the password entry field) are running in slow motion and only update every few seconds. Typing the password afterwards runs smothly again (altought for example moving the mouse at this point still behaves as described before). After loggin in to the account OS X runs fine without any hicks. Can anyone give me a hit what this could be and how I could resolve this?
This has already been done:
Reset PRAM
Boot into recovery partition and run repaired disk and disk permissions
Run all OS X maintenance operations and cleared caches using OnyX
What I could imagine is that somehow the recovery partition is damaged (which as I understand is used to boot to the login screen if File Vault is enabled).
Any help would be greatly appreciated.
Chris

Just ordered a Retina MacBook Pro11,2 (mid-2014 15", 2.2GHz Intel Core i7, 16GB RAM, 512GB SSD, OSX 10.9.4 Pre-installed - Build 13E28) and have the exact same issue. The first thing I did when i booted it for the first time was enable FileValut2 and encrypt the disk. Though I failed to notice this behavior prior to encrypting the disk, the stuttering/lag happens without fail every time I have logged in from a cold boot, locked screen or sleep. Additionally I have noticed the same stuttering behavior when switching tabs on various built-in OSX applications such as the tabs on the About This Mac > More Info.... (System Information) dialog for example, and similarly other dialogs that experience this behavior of resizing when switching tabs. I was running no other software than About This Mac > More Info ... (System Information) and OSX 10.9.4 itself. The issue happens without fail with and without a USB mouse plugged in.
I am really glad to have found this thread and with such recent posts. I'd love to find out that this is just a software bug that will be fixed when OSX 10.10 "Yosemite" is released. If not, I hope the cause of this bug is determined soon so I can still exchange or have it repaired.
Migflono and Matthew, would you be able to post your hardware specs for comparison?

Macbook pro ejects CD/DVD automatically.

My Macbook Pro has started ejecting CD/DVD automatically after some spins. Can anyone help me with this issue?
13-inch, Early 2011
Processor 2.7 GHz Intel Core i7
MATSHITA DVD-R UJ-8A8
FIRMWARE REVISION HA13
INTERCONNECT ATAPI
BURN SUPPORT YES (APPLE SHIPPING DRIVE)
CACHE 1024KB
F

Hello, highspeedsandy.
Thank you for visiting Apple Support Communities.
Here are the best steps to go through when experiencing issues with your SuperDrive.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers,
Jason H.

Macbook pro eject the dvd just after instering them. Eject button dont work

Hi there,
I have a real problem with dvd drive. I inserted many CD/DVD into disk drive of my MBP but it eject them just after inserting even without reading them. It seems that eject button is stucked.
So I forced a CD to stay in drive (I know I'm ...) and then the CD is stucked there.
Also, when I click the eject button (beside F12), it do not work at all. I means that the eject screen picture do not appear on the screen.
Any Ideas?
Many thanks.
Hassan

Hi,
At first glance it seems a hardware problem. But I have tried the DVD drive over network with another OS and it works fine. As mentioned in this post "http://discussions.apple.com/thread.jspa?threadID=2142828&start=15&tstart=0" by "Zungoeie", I contacted Apple store and they said that it's hardware problem and I have to replace my DVD drive (I have no warranty since two month). So as I'm computer engineer, I did not accept that it's a hardware problem as I've checked it with another OS. In the post cited above, one have proposed a SOFTWARE solution which I'm going to try tonight.

The Superdrive on my MacBook Pro ejects audio CDsa few seconds after they are inserted. This happens with both prerecorded CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes.

The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
Fabrizio

You could also try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US

How can I sync my iPhone 4 with a new MacBook Pro without losing all my data and settings?

I used to sync my iPhone 4 with a PC running Windows XP until the hard drive died. Thankfully, I already had a backup of all my iTunes media (Songs, TV Shows, Movies, Podcasts, Apps, etc), so when I bought a new MacBook Pro, transferring my iTunes library was easy.
My problem now is that I want to sync my iPhone 4 with my new MacBook Pro without losing all the data and settings. I have already used iTunes to back it up and transfered my purchases onto the mac. I just need help to sync the iPhone with the Mac without losing app data, emails, contacts, settings.
Everytime I click on the tabs (to sync contacts, apps, music, et al), I get an error message that reads:
"Are you sure you want to sync apps? All existing apps and their data on the iPhone “Ryan's iPhone” will be replaced with apps from this iTunes library."
What do I do? Any help would be greatly appreciated.
Thanks,
Ryan

Read through this helpful document on this subject: https://discussions.apple.com/docs/DOC-3141

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!

Hi Sig,
The issue is that i only want the shared folders to be accessed through windows 7.
Whats the point otherwise to have shared folders?
thanks..

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

I tried to sync my Macbook Pro photos in iPhoto with my iPod Touch. I have done this numerous times, but today I got an error message saying the required file cannot be found. At the same time all of my photos on my iPod vanished. Can anyone help me?

Try deleting the photo cache from your computer and then re-try the photo sync - the location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

I recently lost my MacBook pro which was synched with my apple tv.Now I'm having a problem to bring back my data from my apple tv to my new MacBook

I recently lost my MacBook pro which was synched with my apple tv.Now I'm having a problem to bring back my data from my apple tv to my new MacBook

Welcome to the Apple community.
If you are referring to the first generation Apple TV, then you cannot sync content which is stored on its hard drive back to iTunes.

I have ps cs4 for mac version with the dvd, but my macbook pro has no dvd player, need download

i need a download version of pscs4 for mac since my new macbook pro has no dvd player. I have the licensed version on dvd.

if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
and activate with your serial number.
if you have a download problem, you didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that's (a restrictive browser setting) another potential source of problems.

I have a Macbook Air (july 2012) with OS X 10.8.3 installed. I have dvds with .vob files and have Quicktime Version 10.2 (603.12). I can't play the DVDs. Thereare some features of QT that I like, e.g. precise frame selection and save as .png file-help

I have a Macbook Air (july 2012) with OS X 10.8.3 installed. I have dvds with .vob files and have Quicktime Version 10.2 (603.12). I can't play the DVDs. There are some features of QT that I like, e.g. precise frame selection and save as .png file-help. Am I missing some Apple software? I thought QT for Mountain Lion could convert the .vob files - is there some setting that I have missed?
Any suggestions that preserves a simple workflow much appreciated.

arthur wrote:
Perian is here: Perian - The swiss-army knife of QuickTime® components
Perian will be retired soon.

Hi. My macbook pro will not open the video files taken on a panasonic hd-sd10. is there a mac version of hd writer software that comes with the panasonic camcorder?

Hi. My macbook pro will not open the video files taken on a panasonic hd-sd10. is there a mac version of hd writer software that comes with the panasonic camcorder?
Could do with some ideas.
Thanks

Ask Panasonic whether or not they provide OSX versions of the software.
Google the issue

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

Macbook Pro ejecting a dvd with data files

Similar Messages

Maybe you are looking for