Macbook Pro ejects Leopard disk

I just went down to my local Apple store and bought Leopard. But when I put the DVD in the drive, it spins it for a few minutes and then ejects it. The DVD never mounts. I have a DVD-R with Unbuntu Fiesty Fawn that I then tried to mount. No problem. It mounts and I can open files from the drive.
So I started up the Ubuntu desktop. It mounts the Leopard disk just fine. So it seems that the drive works (and it reads DVDs, since I've seen other posts where a superdrive reads either CDs or DVDs, but not both). And the install DVD can mount on another computer.
Any ideas?

Same issues with Leopard disc my macbook pro was repeatedly ejecting the disc-- very frustrating and weird... I read some stuff here and elsewhere, tried turning the laptop on it's side and upside down with no results. As I explored more I found that it was ejecting ANY install dvd-- CS3 and my EyeTv install disc ejected as well. Long Story Short I found something called Disctop Pro a freeware widgety type thing that installs a preference panel -- all it really does in reality is create a large image of a dvd on your screen when you load a disc... OK I'm not sure WHY or HOW>> but it fixed my issue- Installing Leopard now as i type this... CS3 disc loaded normally and hopefully I will have none of these issues with Leopard upgrade HOPE this helps someone out... and thanks to developers of disctop pro that they accidently fixed my problem.

Similar Messages

Mac Book Pro ejecting Leopard Disk!

I'm not sure whats going on. I have a Mac Book Pro Core Duo 2. When I put the leopard disk in, after about 1 minute, it ejects and does nothing. My other mac book pro installed fine. My friends iBook also recognizes it. What's up?
Message was edited by: William Kessler1

You're not going to believe this, but I had the same problem this weekend on my MB 2GHz (white), and found this answer on another board: insert disk and turn the machine upside down. Hold it that way until the familiar sound of the disk read completing is heard, then set it down back upright. I know it sounds bizarre, but it worked for me, after I had run disk util and every other goddam geeky thing on the disk to try and fix it.

Why does macbook pro eject system disk while depressing c key?

I can not startup.The MBP ejects the startup disk. One attempt with 'c' key depressed, the blue screen eventually appeared then the language screen. I selected utilities, disk utilities and the app froze while accessing disks.

I can not startup.The MBP ejects the startup disk. One attempt with 'c' key depressed, the blue screen eventually appeared then the language screen. I selected utilities, disk utilities and the app froze while accessing disks.

Pleeease help! cant boot macbook pro running leopard!

i am having a huge problem with my macbook pro running leopard. i was originally trying to partition my hardrive for windows with boot camp but that failed cause it "couldnt move files" so i ran disk utility with the installation disk to fix the harddrive.
anyways next thing i know i boot my computer and it stops at the blue login screen before it has the option to login with the spinning wheel and does a loop of blue screens with spinning wheel. wont boot in safe mode and it always stops at the same screen. so i looked around on the web and it sounded like a had to archive and install. so i did that and then half an hour in it told me i had a corrupt file and i had to restart.
so i restarted and then it brought me straight to the leopard installation screen and told me that "mac osx cannot be upgraded to v10.5 on your computer" because "macosx 10.4 or later could not be found"!!! i used the disk util to repair the hard drive but it said everything was fine. i cant safe boot, it wont give me the option to archive and install again its only giving me the option to erase my whole harddrive!
pleeease help! i have not backed up in 2 months! is there anyway to get this to start up or back up some files from this point?

Hello and Welcome to Apple Discussions ...
Ok... if you have another Mac, you can do Firewire Target Disk Mode
To transfer files using FireWire:
Shut down the computer to be used as a disk. Leave the other computer on.
Connect the two computers with a FireWire cable.
Start up the computer to be used as a disk, then open System Preferences, click Startup Disk, and click Target Disk Mode. (Or, start it up while holding down the T key.)
A disk icon appears on the desktop of the other computer.
Transfer files by dragging them to and from the disk.
Eject the disk by dragging its icon to the Trash. (While you drag, the Trash icon changes to an Eject icon.)
On the computer you used as a disk, push the power button to shut it down, and then disconnect the FireWire cable.
Carolyn

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. Anyway, i deleted windows and want another OSX on there instead. How do i make this partition bigger please??

Hi, I have macbook Pro, running Leopard OS X. I partitioned my hard drive a while ago to install windows and only allowed myself 10 Gig of data. I deleted windows after i realised i wasnt enjoying using it at all and wasted my hard drive. I now decided that i want another OSX on there instead yet i have only allowed myself 10 gb on the partition. I have ben thru some programms but am struggling on making this partition bigger.
I only want it at 20gb but cant seem to make the partition bigger, only smaller or split it into further partition.
Is there a way to do this, i have all installation discs from original OSX so think this could help.
Any help please would be fantastic.
Thanks Chris

Hi, dragging the partition will only make smaller, not larger. In disk utility you can only split or make smaller the partitions. Yes i booted from installation disks also but still no help.
And Brody, I am willing to erase the disc completely, infact jus started doing a backup in order to do so but that failed also. And the information you gave on partition a hard drive, Although very simple and i already know how to do this, but it wont let me make the partition bigger, and i dont want to make a new partition, just enlarge the one i already have, which i dont see possible from disk utility.
Getting really frustrated now, even backing up is saying no to me. **** external being a douche.
I dont mind erasing the hard drive but surely this must be doable without deleting the secondary partition back t a single volume, and re partitioning into 2 volumes again.
Thanks again

Transferring home folder from Tiger 4.11 into a MacBook Pro w/ Leopard

I just got word that my PB Aluminum 1.67 that was to be repaired via Apple is now
going to be upgraded to a Apple MacBook Pro
First of I'm (happily) shocked by this offer, and now I begin a new realm into intel technology
MacBook Pro, and now... Leopard! Which I didn't want to install on my Aluminum PB I went only
as far as Tiger 4.11.
My inquiry is on transferring my back up home folder from the Aluminum Tiger 4.11 to the MacBook
Pro using Leopard.
Is that at all possible so I can restore my passwords, etc..into Leopard.
I also have PhotoShop 6 and Microsoft X software, would this be a problem installing or using
in the MacBook Pro?
Just concern about software compatibility with this upgrade.
appreciate feedback.. Aimee

Check with the third-party software vendor to find out if there are any compatibility issues or if you will need to upgrade. Older software may be PPC-only. They will run on an Intel Mac through the Rosetta emulator, but upgrading to a Universal Binary version would be the better course of action.
See:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
Basically the instructions you should follow are:
1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
2. Connect a Firewire cable between your old Mac and your new Intel Mac.
3. Startup your old Mac in Target Disk Mode.
4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
4. Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 3/12/2008
Generally, there should not be any migrating problems between the Intel versions of Tiger and Leopard other than third-party software may require upgrading for compatibility.

MacBook Pro (snow leopard) 2006 will not restart. Getting blank screen with folder (?)

MacBook Pro (snow leopard) 2006 has begun to turn off attached Cinema Display over the last two days. Comes back on on restart. This morning, the MacBook screen also went blank white on restart. Tried to use Snow Leopard CD to restart but it was ejected and folder with ? is only thing that displays. Will not restart. Have replaced hard drive 6 months ago. Help! What's wrong? I need this computer for work.

hawpotr wrote:
1. replace my current internal HD and convert it to external HD for use as secondary boot drive,
No. That has no advantage for you.
leave the internal HD alone and purchase an external HD that I can clone and use as boot drive in case of emergency?
Yes. I use Carbon Copy Cloner to make a boot drive and as a backup (in addition to Time Machine). CCC allows one to make incremental changes as well as creating a copy of the recovery partition. This means that if run on a proper schedule, you data will; be well protected and the MBP can be in operation very quickly if the internal HDD should fail.
A clone should be a 2.5", 9 mm thick SATA HDD so that it will fit inside the MBP. It can be powered from the USB port thus not requiring an AC outlet. In my collection of HDDs, I favor HGST and Seagate products. I principally use OWC enclosures that allow for USB, Firewire and eSATA connections. These are expensive but one can use a more modest one as well of one can tolerate longer data transfer times.
Here is a link showing some available SATA HDDs that will complement your MBP:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
You can look for enclosures on the same web site.
Ciao.

I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?

Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X

The Superdrive on my MacBook Pro ejects audio CDsa few seconds after they are inserted. This happens with both prerecorded CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes.

The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
Fabrizio

You could also try a SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US

How do I get my macmini running Mountain Lion to see my Canon USB printer connected to my Airport Extreme? I have a macbook pro running leopard and that works fine. The versions of airport utility are different and I can't even see the printer from new 1

I am having trouble seeing my usb printer from my second gen airport extreme using the newest version of airport utility under Mountain Lion. UGH! And while I can see and network to my Canon IP5000 from my macbook pro running leopard, I can't from my new macmini running Mountain Lion. Any help would be appreciated in configuring my macmini so it can see the Canon IP5000 on the airport extreme. Don't want to "share" the printer from the laptop because that would be a cludge. Thanks ahead

I solved this one based on another post. Turned out I needed the snow leopard IP5000 driver. I had just copied over the leopard driver (I had saved my .dmg file) and installed that but it didn't work. So I downloaded the latest driver which turned out to be for snow leopard and I am guessing since it is 64bit that is why it worked and the leopard driver didn't. Anyway, I also had to hook the printer up via usb to the mac mini to get it to work locally before the O/S would see it over Bonjour via the airport extreme.

How to install word and excel on a 13' Retina Display Macbook Pro without a disk drive?

how to install word and excel on a 13' Retina Display Macbook Pro without a disk drive?

You will either need to download the apps or use a USB SuperDrive/3rd party CDROM drive or copy your apps onto a USB thumb drive from another computer.

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
Thank you!
This question was solved.
View Solution.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I get an error when loading LR to Macbook Pro using Leopard.

I now have a Macbook Pro with Leopard and wanted to load my Lightroom 2 that I only have on my pc desktop and then get the upgrade for it on the MBP but I get an error failure and do not know where to go from here to find out what the problem is.

I am a PC user, and know nothing about Mac operating systems. Here is a link to a webpage outlining system requirements for Lightroom.
http://www.adobe.com/products/photoshoplightroom/systemreqs/

Macbook Pro ejects Leopard disk

Similar Messages

Maybe you are looking for