Macbook pro flashing question mark folder, won't recognize hard drive

My 2010 macbook pro froze and after restarting I was greeted with a flashing question mark folder. I then restarted again and held down "option" key and went into Mac OS X utilities then into disk utilities. In disk utilities, my only drive options are "superdrive" "disk0" and a subfolder of "disk0" labeled "Mac OS x Base system". My hard drive is no where to be seen. I also tried to install a new hard drive but the same thing happened, the computer could not recognize that there was a hard drive present. What can I do to fix this??

Hi bigdubee,
The exact same thing happened to my 2010 MacBook Pro today.  Restarting with the "option" key held down, I get only 2 of the 3 options you listed in disk utilities ("disk0" and a subfolder of "disk0" labeled "Mac OS x Base system". 
Did you take your Macbook Pro to the Apple store?  And were they able to fix it? 

Similar Messages

  • Flashing question mark, utilities won't find hard drive

    On an iMAC DV 400, 640MB ram running OS10.4.5, I tried to install an OS9 folder, so I could run some classic software. Started install, but a pop-up message gave the impression that the install would write over my OSX, so I aborted the install to re-check the instructions and reassure myself that all would be fine. From that point on, I got the flashing question mark. The computer will boot to OS9 or OSX install disks, but disk first-aid (on 9) does not find the disk and disk utilities (on X) finds it but will not let me repair the disk. Tried resetting PRAM, but it did not help. I am still on the original 10GB harddrive, so am considering an upgrade anyway, but would prefer to save this one if possible.
    Grateful for any suggestions.
    Lemmer
    iMac DV 400   Mac OS X (10.4.5)  

    Lemmer,
    re: "will eventually boot to X" and "just keeps flashing that questions mark"
    A question mark at boot up I believe usually means that the computer is looking for the system folder and cannot find it.
    Look here and the last resort.
    What happened when you tried holding the "x" key during startup without the cd in? Did it just go to the question mark?
    littleshoulders [:-)

  • Flashing question mark folder at start, broken CD drive, warranty Q's.

    Hello! Thanks for reading.
    Okay, so here's the background: I was just chilling around the house yesterday with my macbook, and it freezes, with no response from the touchpad or keyboard. I figure no problem, and just turn it off and on again. And then thats when I got the flashing question mark folder.
    So I hopped on my family's PC to do some research, hoping to be able to fix it myself. Turns out the best way to fix it is to pop in the disk that came with the computer during start up... which I can't do because my disk drive is broken. I also tried other things, like pressing various keys (ctrl + option + p + r, or something like that)... and that didn't work.
    The disk drive broke when I was at school, and as it was finals week, I had no time to get my computer to a genius bar. Then I moved quite a distance (see below), a process which has taken up most of my summer and made me quite busy to the point it has taken my macbook pretty much dying on me to get it to a genius bar. Gah.
    So I guess I have a lot of questions now.
    My computer is JUST a year old, by give or take a week or two.
    I bought my computer from an authorized U.S. reseller in Japan while I was living there (I live in the US now, which I definitely wasn't expecting a year ago)... and no contact from apple came to buy apple care. Is it possible that because of the circumstance under which I bought my computer, that apple may still cover any repair or replacement fees under the warranty?
    Also, I made an appointment at the local genius bar. Will that be free?
    Also, does anybody have any other suggestions about how to get my computer up and running away from the **** that is the question mark folder?
    Much thanks! I appreciate your time.

    You made 2 big mistakes. 1) Apple may or may not contact you about AppleCare (sometimes I've gotten a postcard or email and other times I've not) but it is up to you to buy it before the 1 year mark. 2) whether it was convenient to get the computer repaired at the time or not, you should have contacted Apple to get the issue in the computer. If you didn't, Apple has no reason to believe it happened after the warranty ended.
    You are going to foot the bill for the repairs

  • Flashing question mark / folder on PM G5. Bad Drive?

    Good Thursday;
    I ran into a free powerMac G5 2.3 DC a few days ago. The unit would power on but no boot / video output. I found out (via the local mac store) that the original RAM was bad and so they took it out...leaving 6 GB instead of 6.5. They told it it was booting fine and all was good so I picked it up excited....after paying 50 bucks.
    I get home and boot it up only to get past the chime to a flashing question mark and a folder icon. After doing some reaserch, I am sure the HD skipped and failed on the way home. This was givin to me remember.... I dont know the original owner from Adam. I called the store and they informed me that the OS cannot find the system to boot the machine....hence the folder in question. I thought I had the original OS recovery DVD but it turns out that the recovery DVD that came with this is OS 9!!. I have a DVD that says OS 9. HA! Its the totally wrong DVD. I tried to boot from the recovery DVD only to find an arrow and a refresh icon...no recovery system icon. I took it out and examined it and sure enough, it says Mac os 9. What a trip.
    So now I know why I couldnt get it to boot from the recovery DVD either.
    So, MY question is, what would be my next move here? I feel I should just find a retail copy of Leopard somewear and a spare SATA drive. After speaking with the Mac Store specialist, it seems the HD is infact dead and they quoted my a price of another $90 to install a 500 GB HD with Tiger on it IF infact that is the problem...which they even told me they are sure it is.
    Whould it work to boot into the retail Leopard DVD and then proceed to install onto the new HD? Is my train of thought correct? I have a fair amount of expertise with newer Mac Pro's running Leopard and Snow Leopard but never had an older unit like this.
    Any help would be very appriciated.

    The "?" on startup and not able to find a boot volume can also happen with weak battery, or after "zap pram" or the directory is corrupt.
    Too bad it won't run 10.6 which would be $29.
    A new hard drive like WD Caviar 640GB is a good start.
    G5s came with 10.2.7 or later, usually 10.3 for Late 2003 PCI-X.
    There should be an Apple Hardware CD 2.x as well as OS X Install CD. DVDs started being used with Tiger 10.4 and above. Restore DVD? never seen one.
    Loose cables to hard drive and motherboard do happen.
    Booting into Open Firmware would be great, no OS needed, no hard drive or system. And best way to clear nvram/pram.

  • Question Mark Folder Problem (Already replaced hard drive)

    On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried). This is becoming incredibly frustrating and I hope I don't have to replace a board or anything like that. Anybody here have suggestions? It'd be greatly appreciated.

    Could be something as simple as the hard drive cable...the hardware test won't identify this. Have an Apple store nearby? If so, make an appointment. If it's a bad cable, the fix is easy, but not free unless you have AppleCare.

  • Macbook Pro 2008 ejects disc and won't recognize external drive

    My Macbook Pro 15in 2008 immediately ejects discs.  I have tried opening and cleaning the drive, but no luck.  I went on to connect my external drive, but when I insert the discs, they just spin for a moment, and then stop.  This goes on indefinitely, and there is no way to eject the disc unless I hook the external drive to another computer.  I tried resetting the PRAM, but no luck.  I am running OS X 10.7

    Hi bigdubee,
    The exact same thing happened to my 2010 MacBook Pro today.  Restarting with the "option" key held down, I get only 2 of the 3 options you listed in disk utilities ("disk0" and a subfolder of "disk0" labeled "Mac OS x Base system". 
    Did you take your Macbook Pro to the Apple store?  And were they able to fix it? 

  • Computer Won't Recognize Hard Drive

    I wanted to do a clean install of OS 10.5.  Wiped hard drive using Tech Tool Pro 4.  Now computer won't recognize hard drive during install.  When it asks to what volume I want to install the OS, the screen is blank.  This is a new one on me.
    Anyone have any ideas?  Thank you.

    Boot to the Installer/Utilities DVD, but DO NOT Install.
    Answer only the "what language" question if presented, and wait a quarter minute for the MenuBar to be drawn. Choose Disk Utility from the Utilities menu or the Installer menu.
    Use Disk Utility to Erase the drive again. Be sure you are getting Options GUID partition map.
    Then use Disk Utility to partition the drive to one partition, Mac OS X Extended (Journaled).
    Select the drive and choose Mount. It should not produce an error. Now you are good to go on the Install.

  • Flashing question mark folder on macbook pro startup. PLEASE HELP

    I have a MacBook Pro which I think is a 2011 version. When I startup the computer it comes up with the flashing question mark folder. I can't start it up via disc as I do not have the disc that came with the mac :( .

    Di you try restarting and booting whilst holding down the command and R keys? Or even the command, option and R keys (assuming that you've a 2011 model)?
    Some 2011 models came with discs as they shipped with Snow Leopard. Those that shipped with Lion had no discs. If your machine originally shipped with Snow Leopard, you can call Apple, with the serial number of your MBP handy, and order a set of model-specific discs (cost is, I believe, around $25 with taxes and shipping).
    Please 'call back' and let us know if you've tried booting either to your Recovery partition or to Internet Recovery.
    Clinton

  • HT1310 I have a macbook pro about 4 years old.  I can't get it to open past the flashing question mark folder.  However, I just tried to hold down the option key and the question mark disappeared.  Still, nothing...the light is on the screen but nothing e

    I have a 4 year old macbook pro and when I turn it on, the screen and fan come on but there is a flashing question mark folder that appears.  Nothing beyond that point....help?

    There is no installed OS or you have a dead hard drive. Start by booting from the original installer disc that came with the computer or an installer disc that has a later version than the original such as a Snow Leopard DVD. Then you can do this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • G4 17' won't boot, flashing question mark folder with complications

    I'm editing a final cut pro project, due to air on friday at noon and during conversion in compressor to dvd format, final cut quits then the computer freezes up. On a hard restart I get the flashing question mark folder.... i know what that means
    I was able to boot up after a couple of tries from the os 10.4 (tiger) cd and the hard drive shows up but disk utility can't make the repair. This is the error i get:
    booted with the tiger os cd and got to the disk utility. the hard drive does show up with some generic-y looking name. I try to repair the disk and get this error (in red):
    Invalid node structure
    Volume check failed.
    Error: The underlying task reported failure on exit
    then it says:
    1 volume could not be repaired because of an error
    g4 powerbook 17" Mac OS X (10.4.9)
    so then i get the bright idea that i will change the startup disk to network drive and try to start from another drive on the network. it tries to find it then goes back to the flashing question mark. I've restarted holding the c key down with the tiger cd back in there and it is spinning but it never reads it.
    any ideas? I REALLY need to salvage this film if possible.
    thanks!!!!!
    donna
    Has anyone seen this before? What is my next step--short of erasing the drive. i really need to get this project off.
    thanks in advance for any and all help!!!!!
    g4 powerbook 17"   Mac OS X (10.4.9)  

    i'd try disk warrior except that i cant get it to boot from ANY cd right now EXCEPT apple hardware test. and i have NO idea what to do with that.
    I've tried booting in option mode and all i get is the little restart button and the forward arrow button but NO drive options
    it won't pick up my other laptop in target mode
    i've even put in Norton Utilites 8.x and it won't boot up from that either.
    i've zapped the pram--nothing
    know of any other boot tricks or shortcuts?
    donna

  • Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

    Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
    If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • IMac won't boot - flashing question mark folder

    Hi, I was having performance issues with my iMac, so after searching for a resolution, I followed some suggestions to reset the PRAM and SMC....after resetting the PRAM it will not boot up at all! The startup sound chimes, then a blank grey screen briefly before a flashing question mark folder appears. Nothing happens..... I have the install cd, but there is a CD in the drive and I can't get it out. Help!!
    Thanks in advance....
    Andrea

    HI Andrea,
    To get the disk to eject, start the iMac while holding down the mouse button.
    A flashing question mark appears when you start your Mac
    Try booting while holding down the Option key.
    Carolyn

  • Boots to flashing question mark folder and disc utility cannot locate internal hard drive

    Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

    It was the internal HD cable. I replaced it and now my MacBook Pro works

  • How do I fix the GRAY boot-up screen with FLASHING QUESTION-mark FOLDER?

    When I turn on the MacBook Pro laptop, I opened up the Safari Browser and its when the problem started. It was stuck on an loading infinite loop. I decided to force quit the application and/or turn off the mac by the Menu options, It did not work. So I did a "Hard" Shut-down and restarted the Mac, the Boot up screen stood gray for like a minute until the Flashing ? Folder icon showed up!.
    My sister's laptop's warranty is expired so I wonder how can I fix it without having to spend too much money on a simple troubleshooting tip.
    How can I download/create a boot-up Disk/Flash Drive so I can reset it to factory settings?
    I cannot access the laptop because It's kind-of software bricked if you ask me. Also, I do not know how to check the Mac OS version outside of the "About Mac" menu. I do have another Mac which is a desktop computer with a CD drive.
    I would appreciate some expertise on this issue a.s.a.p. Thank you!

    Ok, now I am stuck:
    Why does my Mac boot its OS from the Flash Drive instead of the INTERNAL HARD DRIVE???a
       If I start up my MacBook Pro, It will have the flashing question mark folder UNLESS i plug in the OS-Boot flash drive. When I at the desktop screen and work on a program, When I unplug the Flash drive, THE OS WILL CRASH AS IF I TOOK it's soul (OS x Lion) out of the body (MacBook Pro Laptop)
    this is frustrating because when I did the INTERNET RECOVERY, When I install OS x Lion, the Flash Drive only show up as an option as opposed to the HDD.
    I cannot format the hard-drive in DISK UTILITY because it's grayed out. This is just frustating. I never had problems with PC Windows OS recovery but this (Mac OS).

Maybe you are looking for