Macbook Pro "flickers" between battery mode and AC mode?

Hey guys, I'm on the newest update of OSX 10.8.1 and I just noticed that my old 2008 Macbook Pro is acting kind of funny. I read that the laptops are designed so that after a full charge, it will run off battery power until XX% before recharging again. This guy is flickering between full and 98%, which is slightly frustrating considering they have different lightness levels.
This didn't happen in 10.8, so I'm not quite sure what the update did. I think some other people are having battery troubles with the new update as well.
I'm not sure why this $2000 machine has more problems than my 10 year old $400 laptop, but it seems apple doesn't really provide support for the older models? I would be very grateful if I got a response other than the "did you try rebooting it?/resetting the PRAM" and the "just buy another/newer xx." Thanks in advance

If you are using iPhoto and if you have a managed library then by default your photos are in the Photo library in the pictures folder in your user account
If you are not using these then they are where you put them
LN

Similar Messages

Macbook Pro has short battery life and runs hotter after firmware update

I installed the macbook pro EFI firmware update yesterday and now my MBP runs hotter and the fan starts running earlier than it has ever done before. Also, my battery lasts 51 minutes from a full charge whereas, before the update, it lasted 2 hours (using the same programs and display settings).
Has anybody else seen this problem?
Please tell me I'm not alone with seeing this. I am hoping that there is a solution and it's better than 'buy a new battery'. The fact that my box now runs hotter with the fan on more constantly would not be solved by a new battery I think.

Also had the problem of MBP running much hotter after most recent Firmware update.
My fans have been running at 6k RPM constantly, and processor Temps have been running at 70-88°.
Following the advice in this topic, I checked the Activity Monitor, which told me both my account and my son's account (which was running but had no actual applications running) had separate Airport processes going nuts – each at approx 80-95%!
Switching off airport and logging out of my son's account almost immediately started to cool the processors, and the fans began to slow down. Switching Airport back on doesn't seem to heat things up again, but if I start to crunch numbers, it all happens over again...
So who knows why the firmware update is making these processes freak out.... weird.

Macbook pro retina - replaced battery quality and age?

This question is about a Retina MacBook Pro, 15-inch, Early 2013 (MacBookPro10,1). It was originally purchased in April 2013.
I would like to find information about the manufacture dates of batteries, and Apple's policies for hardware repairs and refurbished batteries.
My macbook has just undergone a major surgery (at a certified Apple Support Center) after I spilled coffee over the keyboard.
The logic board was replaced (which includes CPU, GPUs, memory, etc), and so was the the "top case" block.
The "top case", I found, it a unique component that comprises the keyboard, the trackpad and the battery.
I was told that these new components are (generally) refurbished parts provided by Apple, and that support centers don't have any control over their state (new or refurbished).
Now that I have got my macbook back, however, I inspected the system to verify the state of the new components, using a combination of tools and terminal commands.
I am very disappointed to see that I've got a very old battery, as its manufacture date is 2012-07-31 (according to this tool).
Is it ok? It looks like it was a battery used in a previous generation of the macbook pro. Or is it normal that early 2013 Macbook pros had their batteries manufactured in the summer of 2012?
The battery doesn't even seem to perform correctly (or, if it's not the battery, it's the logicboard). I've tried to discharge it completely and then recharge it, but the computer shut down when the battery was just at 18%, with no warning dialog from the OS. I plugged the power cord and resumed my session on the computer, and the battery level appeared to be 16%. I charged it until it reached 19%, unplugged the cord... and the battery level jumped to 25%!
The computer computer then shut down again when the battery reached 17%. I recharged it fully, and now I'm trying again (seems to be behaving more normally, now).
Still, that's odd. The original battery never did anything like that.
If it can be useful, this is my System Monitor App battery report (not charging at the moment, 12% left):
Battery Information:
Model Information:
    Serial Number:      D86230735FLDNMGAY
    Manufacturer:       SMP
    Device Name:        bq20z451
    Pack Lot Code:      0
    PCB Lot Code:       0
    Firmware Version:   511
    Hardware Revision: 3
    Cell Revision:      1150
Charge Information:
    Charge Remaining (mAh):      1122
    Fully Charged:               No
    Charging:                    No
    Full Charge Capacity (mAh): 8487
Health Information:
    Cycle Count:      3
    Condition:        Normal
Battery Installed:   Yes
Amperage (mA):       -2195
Voltage (mV):        10617

Today I brought the macbook back to the service center, where they re-executed the hardware test.
They showed me the resulting graph, that showed that my battery state is "optimal": it was represented as a dot in the top-left corner of the green area, as in this image.
And yet, even though the problem described in the opening post hasn't happened again, I can tell that the battery lasts way less that the old one.
Again, does anyone have any information about the "normal" manufacture dates of macbook batteries?
Is it possible that this battery was designed for a previous generation of macbook pros?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

I occasionally have issues waking my macbook pro up from sleep mode and have to restart the computer. The apple store replaced the sleep part but the problem is still there

I occasionally have issues waking my macbook pro up from sleep mode resulting in my need to restart the computer. I dislike all of my programs opening at once when I do get the computer started becasue it slows the cpu down. The apple store replaced the sleep part but the problem is still there. Note: i never had this problem with snow leopard

I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).

Macbook pro late 2010 battery at 24 cycles for 15 weeks computer and capacity is already 93%, anything wrong?

macbook pro late 2010 battery at 24 cycles for 15 weeks computer and capacity is already 93%, anything wrong?

How many cycles depends on how often you drain the battery down low and then recharge it to maximum, ideally use it a little less on battery and a bit more on mains and the cycle count will slow down. Every couple of months you need to re-calibrate the Battery for best long term results.

Use airdrop between macbook pro late 2008 (mavericks installed) and iphone 5s.

Can i transfer files between airdrop with a macbook pro late 2008 (mavericks installed) and iphone 5s?

I have the same problem on my early 2011 mbp... i think it's a bug. there's not even a menu for see older macs or who can airdrop to me

Preview very sluggish on MacBook Pro. Move a bar and the umbrella turns a few seconds. Any ideas? I don't want to update my iMac until this one is solved.

MacBook Pro with 4GB of memory and a 2.3 GHz Intel. No other program running other than Preview.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) on the advice of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;/Apple|SMSC/d;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find .??* -type d -name *.app -prune`; Pm "Hidden apps"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How-To: Install Bundled Apps to another MacBook Pro using Target Disk Mode

Recently, I replaced the dead hard drive on my wife's computer. All the data was previously backed-up so all I needed to do was reinstall the original OS. Oops! Those disks disappeared over two years ago...perfect, right? No poblem, I already had the boxed install DVD for Snow Leopard and installed the core OS. But what about those bundled applications? Aha! That is the marketing coup Apple doesn't really talk much about. You see, you get the entire suite of Apple branded apps with the original install disks but not with a boxed OS install disk. It's just something that you have to find out for yourself...the hard way.
My requirement: restore all the iPhoto data to the reimaged machine running Snow Leopard. But that data has no application that can read it. Solution - Reinstall iPhoto from another source.
So I developed this workaround I hope the rest of you find amusingly simple, wildly helpful
Here's how I restored iPhoto on my wife's computer:
1) Get two Laptops side by side. In our case we both have macbook pro 2008 computers (Wife's and Mine)
2) Power both down and direct connect a firewire 400 cable (or 800 if you have it) between the two
3) Start the Wife's laptop in Target Disk Mode: Press "T" immediately after engagin the power button, hold it down until you see the "fanned" firewire symbol floating across a grey screen - it's quite large, about the size of your hand making a "stop" gesture
4) No start the Mine laptop by pressing the "option" key (two keys to the left of the space bar)
5) You will presented with a pair of hard disks to boot from, choose the Wife's laptop hard drive
5a) you'll notice now that the Mine laptop is booting the OS system files of the Wife's laptop (Her desktop, her preferences, etc...)
6) On the Mine laptop, insert the original Mac OS Install Disk (#1) that came with the Mine laptop (usually any OEM install disk will work, though)
7) Double-click on the DVD icon on the desktop when it mounts and look for a shortcut that reads, "Install Bundled Applications Only"...launch it
8) Now choose install bundled applications but make sure to press the "Customize" button in order to specifically choose which OEM software you want. In our case, just iPhoto
9) Follow the installer prompts all the through to completion and exit (you will be prompted to insert disk #2 along the way).
10) Remove the install disks, power down
11) Power down the Wife's laptop too
12) Disconnect the Firewire cables from both laptops
13) Power up the Wife's laptop normally
14) Launch the FInder and drill down to Applications. Look for iPhoto and launch it
15) iPhoto will either pickup the "iPhoto Library" that was previously restored after reimaging with Snow Leopard or you may be prompted to manually associate a library with iPhoto.
16) Once complete, you'll se all the restored pictures and data from when before the original hard drive crashed. Wife will be pleased and you'll look like a Genius
This is a really handy trick for troubleshooting a lot of install and restore related issues.
Hopefully you'll find other uses for it too.
Good Luck,
TheHighSierras

I think the problem is that you can't install an older OS X version onto a system running a newer OS X version. So I would try the following:
     1. have an external disk or create another partition on an internal drive to use for the Mountain Lion install (you might have to shrink an existing partition to make room for another)
     2. Create an external bootable USB thumb drive with the Mountain Lion OS on it (do a search on the web for this - for example see http://www.macworld.com/article/1167857/how_to_make_a_bootable_mountain_lion_ins tall_drive.html
     3. Reboot Yosemite and then boot from the USB thumb drive by holding down the option key
     4. run the mountain lion installer and install on the new disk/partition you created in step 1 - it will also create another recovery partition from this same part of the disk
Now your Mac system will have both a Mountain Lion install as well as the Yosemite install. You won't be able to use Migration Assistant to move things from Yosemite to Mountain Lion because it will see that you're "going backwards" and won't allow you to.
Have a good backup of everything before starting in case there are problems.
Good luck...

Should I buy a macbook air wid i7 and 8gb ram or macbook pro with 2.4ghz i5 and 8gb ram

Hii.i am planning 2 buy a macbook and i am confused between pro and air so should I buy a macbook air wid i7 and 8gb ram or macbook pro with 2.4ghz i5 and 8gb ram..I want it to be fast and my use is onli web surfing , word & excel, watching movies and loading photos....plss help its urgent

I have a 2 year old Air with 1.8 GHz i5 4 GB that is more than adequate and extremely fast for the uses you describe.
Is battery life a factor in your decision? If so, knowing that may help someone else give you some more input.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

Kernal_task is taking up 300% CPU on my macbook pro while on battery

Kernal_task is taking up 300% CPU on my macbook pro while on battery, but goes back to normal while it's plugged into power source. Battery life is still normal. Any suggestions on how to fix this?

I just received my MBP Retina yesterday. I have not installed anything and the system is running so slow that when I type the text on the display is lagging behind my typing. Scrolling, app switching, etc. are all either choppy or I have to wait. Activity monitor shows kernal_task %CPU jumping between 500% to over 600% with 83 threads and about 675MB real memory. The fan is on continously, does not matter if it's plugged in or on the battery. NOT A GOOD FIRST TIME EXPERIENCE FOR ME.

My macBook Pro heats up so hot and nearly burning my lap

my macBook Pro heats up so hot and nearly burning my lap. Anything wrong with it? Should I bring it to Apple store?

Here's a search of cooling pads for MacBooks. I use one that just elevates my MacBook Pro off my lap so air can circulate between my lap and it...... letting the Mac's fan work best. You have to keep the air from being blocked going in and out of it and clothing and blankets interrupt that.
MacBooks tend to heat up if you are taxing it with video games and steaming videos, etc.. Maybe yours is at the age where the battery may be on it's way out. When mine neared the end of it's life it heated up quite a bit raising the temps for the whole machine.
Here's the free Temperature monitor. Maybe it can point to something.
DALE

Macbook pro mid 2011 battery lasting only 3 hours

How can I get my brand new Macbook pro mid 2011 battery to last longer, now it's lasting only 3 hours.

Do not believe the advertised specs from any manufacturer regarding battery life. In the real world expect about 60% to 70% of those figures. Battery life is influenced by many factors, Among these are display brightness, the number and type of applications you are running, if the optical drive is used, external devices that may be attached etc.
3 hours seems a bit low but not necessarily out of line. Go to SYSTEM PROFILER>POWER and see what it says by 'Condition'. If it is other than 'normal' you may have battery issues (Explanations then can be found in FINDER>HELP).
Ciao.

How to keep display on Macbook Pro instead of Clamshell Mode

I have an extended desktop through a Mini-Display Port-to-VGA connection from my Macbook Pro (OSX Mountain Lion) to an external monitor. I have the Macbook Pro screen set up as the "main screen" (with the display bar on top). But everytime I close my macbook pro, the computer goes into clamshell mode and sets the extended desktop as my "main screen" which switches my display bar. Is there anyway to tell OSX ML to always keep the Macbook Pro screen as the default and not go into clamshell mode?
This also creates a problem when I want to physically close my computer to allow to sleep, but instead goes into clamshell mode and extends the desktop to my external display. Any ideas?

this is from another discussion:
jk10003
Re: MacBook doesn't sleep when closing lid with external monitor attached with Lion Oct 14, 2011 7:01 PM (in response to admgtz)
I would like to offer this solution. I have a MacBook Pro with an external monitor, and, for a year and a half both displays slept when I closed the MBPS. This behavior stopped when I installed Lion. They would sleep when I removed the power cord, but what a pain that would be. The command "pmset -g assertions" gave no indication of which process ought be preventing sleep.
I contacted Apple support, and after some searching, the guy working with me found this thread, which was flagged as an Apple-approved solution:
https://discussions.apple.com/thread/3190417?start=165&tstart=0
This is the important part:
Correct AnswerRe: How do I tell Lion to disable the LCD screen even when the lid is open?
Aug 31, 2011 9:56 AM (in response to Bob_viking)
Here's the command to make your laptop behave like it did Pre-Lion (courtesy of my friend):
sudo nvram boot-args="iog=0x0"
Works perfectly for me. If it screws up your system, just zap the PRAM next boot (cmd-opt-p-r) and you'll be back to the default Lion state. Or if you can still get into terminal, this command will get you back to Lion's default state as well:
sudo nvram -d boot-args
Enjoy!
One snag was that I had to run it with the external monitor disabled, but it worked great!

Macbook Pro "flickers" between battery mode and AC mode?

Similar Messages

Maybe you are looking for