Macbook pro, frame is bent next to power outlet. How should I fix it?

The frame around the power outlet is bent. It still charges. Should I try to straighten it out?

Without significant disassembly you cannot get it back to 'as new' condition. You can though improve it where the case meets the keyboard. To do this successfully you need good to superior mechanical skills ie. and intuitive understanding when you have bent aluminum enough without cracking it. If not, do as suggested by others , leave well enough alone.
The keyboard will have to be removed. If you go to the OWC website and look for HDD installation videos for your MBP, it will be the same process. You need will need a 00 Phillips head screw driver and maybe a # 6 Torx driver.
Once the keyboard is off you will need a couple pieces of thin but stiff oak or perhaps plastic that will not mar the aluminum. (I suspect they should be about 1.5" long) These may have to be modified to fit the case, both inside and out as the situation requires.
You will need vise grips. (you can also use a small C clamp)   Position a piece of oak inside the case and a piece outside the case. Take the vise grips and adjust them so that they just start to compress the oak against the aluminum case. Keep tightening the vise grips until the aluminum case is straight.
When you release the vise grips there will probably occur a slight bend. Take one of the oak pieces and whittle or plane a convex surface.   Place that convex surface where the bend is protruding (probably on the inside based on the pictures) and put the strait piece on the out side and again use the vise grips to flatten the bend.
If it is not straight enough to your satisfaction, create a slightly concave surface on the outside piece. What you want to do is to bend it just far enough where it will become straight when you release it. Therefore do this process in small increments.   If you over do it you are likely to create a bend the other way.
Aluminum is readily subject to metal fatigue so you cannot keep going in and out. You essentially have one shot at doing this.
Ciao.

Similar Messages

HT5787 My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?

My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?

dana2208 wrote:
My MacBook Pro will not let me log on. How do I fix this? Can apple reset it?
Yes.
Password doesn't work?
If so, try resetting it. If the computer is having any other problem, take it to the Apple store to have it checked out.
Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.
Best.

My MacBook Pro shows a grey screen at start-up how do I fix this problem?

My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My MacBook pro airport is not picking up IP address, how do I fix this?

All this started after an automated update by the computer. Anyone else with this problem?

As this article says, your device must be turned on, locked, connected to a power source, and WiFi.
iCloud: iCloud Backup

Firefox will not stay open on my MacBook Pro; it opens for roughly 30 seconds, then crashes. It works fine on my MacBook and my HP Mini, but not on the MacBook Pro. Are others having this problem? How do I fix it?

I have XMarks enbled, and about 20 seconds after opening, Firefox asks me to verfiy two XMarks addresses (choose between local or server). After I do so, Firefox crashes and generates the below crash report details:
Add-ons: [email protected]:3.7.8,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.6
BuildID: 20100625223402
CrashTime: 1281634673
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1278427861
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 68778
StartupTime: 1281634490
Theme: classic/1.0
Throttleable: 1
URL: http://www.nytimes.com/2010/08/13/business/13auto.html?_r=1&hp
Vendor: Mozilla
Version: 3.6.6
This report also contains technical information about the state of the application when it crashed.

See my reply in your other post.
https://discussions.apple.com/message/25838050#25838050
Please ask only once.

My macbook pro fan began to be very loud. How can I fix this?

I am unsure as to why this is occurring, but I have heard this can be caused by software rather than a hardware issue. I am led to believe this is the case because my fan is not loud all of the time, only some times and in random bursts. How can I stop this?

Do a SMC reset > http://support.apple.com/kb/HT3964
When your fans are loud, open Activity Monitor (in /Applications/Utilities) and choose "All Processes" above "Show" in the toolbar. Then, look for processes that are taking a lot of RAM and CPU, and copy their name here with their CPU and memory usage

My macbook pro won't keep a disk in. How can I fix?

Please Help

Read this Apple Support link on Optical Drives:
support.apple.com/kb/HT2801http://
Many time the lens is dirty. A shot of compressed may clean it or the use of a lens cleaning DVD may rectify the problem.
Ciao.

MacBook Pro (late 2011) suddenly won't power up

Was working with my MacBook Pro this evening, initially on battery power. Switched to AC when the battery was at 60%. An hour later it was nearly fully charged and I closed the laptop (without shutting down) and took it with me to a restaurant. Got back to work, opened the MBP up and...no power. MagSafe light flickers faintly; no battery indicators light when I hit the battery strength button. Tried an SMC reset and a PRAM reset to no avail. All this while I'm in a foreign country doing a project with a tight deadline.
I'm going to attempt to see an Apple reseller in the morning, but does anyone have further troubleshooting or diagnostic suggestions? Thanks.

The Mac Pro logic board includes a set of LEDs to help troubleshoot the
computer. The LEDs are located toward the rear of the logic board, under the memory cage, next
to PCI card slot 1. You can view these LEDs by removing the computer’s side access panel and
looking through the memory cage to the logic board below. LEDs 2, 3, 4, and 5 are normally off
and will automatically illuminate if an error occurs. To read LEDs 1, 6, 7, and 8, you must press the
DIAG_LED button, which is adjacent to the LEDs. To press the DIAG_LED button, use the nylon
probe tool.
Location Name Color Nominal Press DIAG_LED button to displayIndicates
Led 1 Trickle Pwr Yellow On Yes Power supply is providing trickle power
Led 2 CPU B Error Red Off No CPU B halts on an IERR(instructionerror)
Led 3 CPU A Error Red Off No CPU A halts on an IERR(instructionerror)
Led 4 CPU B OT Red Off No CPU B is over temperature
Led 5 CPU A OT Red Off No CPU A is over temperature
Led 6 GPU Present Green On Yes EFI has configuredthe graphicscard
Led 7 Power On Green On Yes All power rails are functioning
Led 8 EFI Done Green On Yes EFI is done loading

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

New macbook pro fail to respond to the power button

Why did my new macbook pro fail to respond to the power button?
I have a new 13" MacBook Pro Retina (10.9.1) which I have been using for about 3 weeks. I am new to Mac and am in the process of making the transition from Windows XP.
Today, with the battery at 100% and the power lead disconnected, I left the mac with the lid closed but, when I returned, it did not come back to like when I opened the lid. Also, it would not respond to the power button.
After some web searching, I managed to get it back to life after resetting the SMC.
Is this a software problem, or is it more likely to be a hardware problem?

Highly unlikely that software is involved - especially since resetting the SMC corrected the problem.
Unless it happens again, I would forget it. If it occurs again, take it in for warranty service.
Barry

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

I have a 2010 vintage 13-inch MacBook Pro that has a 60 watt power adapter. I also have an older power adapter that is 65 watts. Is it okat to use the 65 watt with this MacBook Pro?

yes.
"For instance If you have a MacBook (13-inch Late 2009) that normally uses a 60W adapter, you can also use an 85W adapter with that computer. You would not use a 45W adapter with that computer; it would not provide enough power for that MacBook. Using an adapter of higher wattage than the adapter that came with the computer will not cause the computer to charge more quickly or otherwise operate any differently than using the adapter that came with the computer. "
http://support.apple.com/kb/HT2346

Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks.

My Macbook Pro shut down because the battery power ran out. Now I cannot start it and the battery will not charge. Only one green battery charge light lights up and blinks on the left side. I am running Lion. How do I get this to charge and turn on? Thanks

If your model Macbook Pro is the calibrating model, let the battery calibrate.
If not, and are still under warrant or have Apple Care, give them a call and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.

Macbook Pro gets really hot including the power adapter

Hi Guys,
Good day to you all!
I just have an inquiry about my recently purchased Macbook Pro 15-inch (non-Retina). On the first 2 days of using it by just running Mac Mail, Safari, and iTunes, it's temperature is really acceptable. However, on the 3rd day, the base of the Macbook Pro was really hot, including the Power Adapter. I even noticed that the fan was making a loud noise, just like a jet engine (just being exaggerated). But the fan activity is really unusually loud. When it got that hot, I was doing Skype with my wife, playing music in iTunes, copying photos from an external hard drive to iPhoto, and using Facebook in Safari.
What I did was I unplugged the power adapter, and let the battery reach 0% until it automatically goes to sleep. Then I will be charging it while it's off as part of the battery calibration link that I've found at the Apple support page. Also, I did the SMC reset.
I was just concerned because I don't know if I'm going to ask for a one to one exchange since it's still within the 14days return period for Apple Online Store purchase.
I hope someone can give me a suggestion and other recommendations to sort out the heat and fan issue.
Best regards,
Aris

It could if the camera wasn't properly wired and the camera was used a lot, or if the Skype software accessed the graphics chip a lot and the graphics chip was somehow damaged. A cooling pad is not a bad idea. But heating issues with Macs that present themselves with automatic shutdown are about the only one's I'd really get concerned about for the Mac. The notebook is not a laptop, and a cooling pad makes sense mostly if you are going to use it as one. Cooling it down would certainly help it regardless. If you notice a difference in performance with it, that might be worth while checking the hardware test mentioned on my tip and taking it in for. Do get AppleCare before it is a year old. That way you can bring it in and get the hardware fixed up to the third anniversary of buying the machine.

Macbook pro turns off when i unplug power cable

my macbook pro instantly turns off and wont power back on when i unplug it. it is only 6 months old and all seems ok on power readings.....
Battery Information:
Model Information:
Serial Number:          W012859X7D3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          5499
Fully Charged:          Yes
Charging:          No
Full Charge Capacity (mAh):          5609
Health Information:
Cycle Count:          70
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          12459

Reset your SMC and see if that makes a difference: http://support.apple.com/kb/HT3964 . If that doesn't do it, take it into the Apple Store or AASP for warranty service.

MacBook Pro shuts down when I close lid. How can I prevent it?

MacBook Pro shuts down when I close lid. How can I prevent it?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light may cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

Macbook pro, frame is bent next to power outlet. How should I fix it?

Similar Messages

Maybe you are looking for