Macbook Pro Freezes after wake up from sleep

My Macbook Pro 5,5 with mountian Lion freezes after waking up from sleep. i have 8 GB RAM and did a hardware test wich was passed. I also have a SSD of 240 GB in the optical drive. this is my startup drive. Another HD is my workdrive. The first thing I see is that the Airport does not come back and it seems that is does not wake up. After that the whole finder freezes.
What can be the problem?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Similar Messages

  • MacBook Pro doesn't wake up from sleep mode

    My MacBook Pro (late 2011) with OS Mavericks doesn't wake up from sleep mode anymore. Battery is fully charged and the cable is plugged in. I can still hear the ventilator running, but that's all. I never had any problems, but since about 2 weeks this problem occurs. It usually then woke up after 10-15min, but now nothing happened since 4 hours.
    Is there anyone who could possible help me? Unfortunately there is no Apple Store in my area where I could go to.

    Step 1
    Take all the applicable steps in this support article. That's the starting point for any further efforts to solve the problem. Please read the whole article carefully (some of it is hidden by disclosure triangles) and don't skip any of the steps, including the ones under the heading "Additional troubleshooting." If you don't understand any of the steps, ask for guidance.
    Step 2
    If you're running OS X 10.8.5 or earlier, from the menu bar select
               ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
              Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
               ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.
    Step 3
    In the Energy Saver pane of System Preferences, uncheck the box marked
              Put hard disks to sleep when possible
    Step 4
    This and the next step must be taken as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You may see one or more reports with a name that begins with "Sleep Wake Failure" followed by a date. Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    Step 5
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ Diagnostic and Usage Messages
    In the search box in the window's toolbar, enter "powerd" (without the quotes.)
    You may see one or more lines like this:
    com.apple.message.signature: Platform Failure
    If you do see that, and you did everything in the preceeding steps, then you're dealing with an internal hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • HT203176 MacBook Pro will not wake up from sleep

    My MacBook Prof laptop will not awaken from sleep sometimes. The laptop could be left open and I walk away for awhile. Come back and it is in the black screen status. When I hit a key to wake it up....it won't. Have to hold the power key down for several seconds to turn it off, then push power key to turn back on. Also, sometimes I close the lid and walk away. Come back several hours later and it will not wake up. Went to the Apple store a few weeks ago. They ran a quick diagnostic on my hardware and said it was all fine. They suggested they wipe clean the hard drive and I start fresh. We did and everything was fine for a few weeks. Now it starting all over again? Very frustrating and time consuming to have to restart your computer multiple times a day.
    Any suggestions or thoughts? Could it be a hardware issue? Should I let the Apple store run the 7 hours hardware test?
    Thanks.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • MacBook Pro will not wake up from sleep

    When I left for work, my MBP (2007) was working fine, I put it to sleep).
    When I got back from work, I tried to wake it up, and nothing.
    I powered it down and tried to reboot. Nothing, not even the chime.
    I pulled the battery, and held the start button for 10 seconds.
    Tried to reboot with and without the battery; no chime, dark display.
    Sounds like my firmware fried, and Applecare expired recently.
    Any suggestions appreciated.

    "Applecare expired recently."
    How recently? I would still give them a call. You may be surprised at the outcome.
    See Article: http://support.apple.com/kb/TS2377 *MacBook Pro: Distorted video or no video issues*
    !http://i50.tinypic.com/izvwo1.gif!

  • Macbook Pro won't wake up from sleep mode

    When I put my macbook pro to sleep, it does not wake up. If I turn it off after every time I use it, it is fine. Is there a problem with the sleep function or with the battery? Also, I am concerned that my mac's speed is slowing down, is this related?

    I have the same issue with my Macbook Pro 2.4
    Have you by any chance installed a new RAM?. I've just added new 8 GB RAMs & I noticed the issue afterwards, but I'm still not sure if it's the cause.

  • Macbook Pro Retina Slow Wake Up from sleep

    Hi, my 13-in MacBook Pro is the late 2013 version installed with OS X Mavericks 10.9.4.
    I have noticed that ever since I upgraded my OS from 10.9.3 to my current one, whenever my MBP goes to sleep (standby mode) and when I want to continue using it, swiping my fingers across the trackpad will bring the cursor back on but on a BLACK blank screen. It will then take about another 15-20 seconds before my screen comes back on. It is irritating especially when I am rushing my work.
    On the other hand, pressing any key on my keyboard brings it right back to my start screen.
    Is it a problem with the OS or just my MBP?

    Yeah I've had this problem too, unfortunately there's no way round it but to wait a few seconds after it goes to sleep before touching the trackpad or the keyboard.

  • Macbook Pro won't wake up from sleep

    I've had my 15" Macbook Pro for 3 years now, and only recently have I started having this problem. When I have my Mac on (plugged in or unplugged) and I walk away it will go to sleep and the only way I can get it to wake up (without plugging in external mouse and external keyboard) is if I restart. This is very problematic if I am working on something important.

    PacificBlue wrote:
    Come on Apple, please give us an answer. For a 2000$ machine this is totally unacceptable.
    (1) As explained in http://discussions.apple.com/help.jspa , you are not writing to Apple here.
    You can send feedback or suggestions directly to Apple at:
      http://www.apple.com/feedback/macbookpro.html
    You will not get a response, but you can be certain that the responsible Apple
    people will see your input for consideration in future product development.
    (2) If you do not have a local Apple repair source or get the help you need here, consider:
      https://expresslane.apple.com/
    or the other Technical Support options here: http://www.apple.com/contact/
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.7)
    MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.7)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11)
    iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.3.1

  • Macbook pro freezes after coming out of sleep mode

    Lately my 13" early 2011 Macbook Pro has been locking up when in sleep mode. All I get is a blank screen and the cursor which responds, but no buttons pushed on the keyboard resolve issue. Resolution thus far has been to hard boot the macbook... Anyone have any ideas how to troubleshoot or determine cause of issue?

    Try Reset SMC.
    http://support.apple.com/kb/HT3964
    Choose the method for
    "Portble computers that have a battery you should not remove on your own".
    Best.

  • Anything new on the "Macbook Pro won't wake up from sleep" problem?

    I just had it for the first time, and did the "hold down power button to reset" option. Scary, but I see I'm definitely not the only one with this problem. (To clarify, it's when I open up the computer after putting it to sleep, and get only a movable cursor and a black screen.) The computer is about a month and a half old. I'd been putting it to sleep regularly that entire time with no problems that I can tell (except the battery does have to recharge when I plug it in after sleep for a long time, but as far as I can tell, it IS asleep during that time - the laptop is still cold).
    I don't have anything attached to it or linked to it with Bluetooth (only external thingie is an Airport Express), and I don't use Time Machine. I've seen some of the other suggestions, and I haven't tried them yet, but the page on the SMC reset makes all sorts of dire warnings about MAKE SURE YOU TRY EVERYTHING ELSE BEFORE DOING THIS. How should I approach those warnings? Anything new anywhere I could try for next time? Oh, and is there a more computer-friendly way to get out of that black screen than what I did - holding down the power button?
    Thanks in advance.
    Message was edited by: LeaperBP

    Hmm. Has that actually worked for anyone? The posts I've read here (at least for those w/o Snow Leopard) only mention it as something that HASN'T.
    Has method of putting the computer to sleep had any relevance? Is this something I should take to some level of official Apple folk? I really hope they're working on it (it seems to have existed in Leopard for quite a while now, though if it's happening more often with Snow Leopard, I'm hoping that creates new impetus).

  • After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

    hello,
    after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
    the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
    The only "solution" is to restart my Mac.
    - SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

    I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
    My solution:
    Cold start with Command-v pressed.
    This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
    What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
    Maybe Cmd-v set open firmware params and fixed some corruption.
    Anyway: my mac mini works again.

  • 9600M GT: 5W more power-draw after wake up from sleep?!

    Hey Ladies!
    I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
    Looks like a bug to me?!

    Hey Ladies!
    I measured the wattage of my Macbook Pro with both the 9400M and 9600M and found that the 9600M GT draws 5W more power after wake up from sleep than before sending the MBP to sleep.
    Looks like a bug to me?!

  • P67A-GD55(B3) freezes on wake up from sleep mode (active control center)

    Hi,
    Problem with my PC lock screen freezes on wake up from sleep mode (active control center)
    When in sleep mode while using the control center on Windows, wake-up, freezes the lock screen.
    So, turn off the power. Then after about 3 seconds long, starts up automatically. And also freezes the lock screen.
    So, turn off the main power wait a while and it recovers.
    If not running the utility control center, no problem.
    ( fan control only on the control center. Does not overclock ) control center 2.2.098 ~ 2.5.045 similar problem.
    System:
    MSI P67A-GD55 (B3) - BIOS 1.19
    i5 - 2500K
    Mem: Patriot PVV38G2000ELK 2x4GB (use 1866)
    VGA: Giada GTX570
    PSU: Antec HCP-750
    HDD: OCZ Agility4 128GB,  2nd seagate ST3500418AS 500GB
    OS: Win8 x64
    Sorry for poor English

     in that case (no install),Sleep & wake-up to no problem.
    CC is installed state. If not running the CC on Windows, it's no problem.

  • After update to 10.7.1, Wifi retrieved after wake up from sleep?

    Anyone who had "no wifi after wake up from sleep @ MBA 2011 " issue before, is this fixed after 10.7.1 update installed? Any tester please drop your comment.

    In another Mac forum saying that after the 10.7.1 update, need to reset the PRAM to get this issue solved.

  • Application launches fail after wake up from sleep when switching from one open directory to another

    I take my MacBook Pro back and forth from home to work.  Open Directory is set up at both locations running on Snow Leopard server.  These two locations are entirely separate domains and IP networks.  The only thing that is the same is my username and password, which is the same in both locations.
    If I put my machine to sleep in one location and move to the other location and wake it up, I can usually launch one application, then no other applications launch and the machine is pretty much frozen up except for mouse cursor movement.  Using command-shift-escape and relaunching the finder doesn't help.
    It is as if the launch daemon has been made inoperative.  Apps just sit and bounce.
    Should one be able to log in one one network with open directory. Close all applications, move to an entirely different network, and wake up from sleep and continue working?  The login/password is identical on both open directory setups.
    Both home and work are set up so the users can "travel" and the machines are not "bound" to the open directory server.
    I've started using the "other" login box to login in which I think keeps the machine more independent of open directory and that seems to work better for moving between networks.
    Any ideas and/or comment welcome.
    (my DNS seems fine in both environments.  running changeip gets "success" in both places)

    After reading another post that popped up under "More Like This" after I posted this I may have found at least a temporary fix.  Unplugging and reseating the MDP adapter in the MacPro didn't accomplish anything but unplugging/reseating the HDMI plug in the Viewsonic brought it back to life.
    I guess I can live with this but it would be nice knowing that there's a more permanent fix for this.

  • 13.3" macbook pro flickering screen when waking from sleep

    I have a Mid 2012 13.3" MacBook Pro (non-Retina) laptop that has been working well, until the last few days.  The laptop has had no physical damage and no liquid damage.  I have put the laptop to sleep by closing the lid.  When the laptop lid is raised and the laptop turns on this last week I have noticed that the screen flickers and then appears to be on, but the screen is a grey color.  I have been able to press the power button to put the computer back to sleep.  Usually when pressing the power button to wake it from sleep the screen issues have cleared up. 
    Is there a known issue that may cause the issue with the flickering/grey screen or could there be a short in the wiring that powers the screen?

    Hey there Oregan Mac User,
    It sounds like you are getting screen flickers when trying to wake your device from sleep. I recommend the troubleshooting form the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for

  • Creating a Link to a Page on my site

    I have bought a company and I got this MacBook and there is a Website built on iWeb. The Website is www.crossfitmyrtlebeach.com Under Trainers there are 3 trainers showing. I added the 3rd trainer, Sean. But the other 2 trainers have a link where you

  • CD/DVD drive does not read all DVD formats and regions

    Hi My Teac-dw-224e-a does not read all DVDs formats and regions. It does read CDs but no DVDs at all. Not DVD-R and not even regular DVDs. I have checked the region of the DVD. I have reinstalled the driver and also tried with different software. Wha

  • FI Report: account cumulated amount for specific accounting dates

    Hi gurus, Would someone know a report that would display the cumulated amount for each account, for specific dates? Example: From date: 01.01.2008 To date: 06.11.2008 - Acc 600000 : 1235,67 EUR - Acc 612000 : 7777,77 EUR - Acc 615000 :  120,00 EUR -

  • IS IT POSSIBLE TO RUN TWO DAQ CARDS?

     Hi all I am a newbie to Labview.  Is it possible to run two pci 6031e cards from one running  labview program ? I am out of i/o on the 6031e card  in my current program and need more measurement points.  So I simply want to run another 6031e from th

  • What kind of RAM do I need?

    I'm looking to upgrade my iMac G4 1GHz so it will run leopard. Right now it has only the RAM it came with: 1 slot with 256MB DDR SDRAM PC2700U-25330. I have no idea what any of this means, and I'm just trying to get to 512MB. When I look for memory,