Macbook Pro freezes, shuts off during startup

My Macbook Pro sometimes freezes and when I try to turn it on again it shuts itself down during the startup.
A couple of days ago my Macbook Pro (15 inch late 2011 with Yosemite) froze and I shut if off by holding down the power button. When I tried to turn it on again a grey screen with the Apple logo and a bar showing how much it had loaded showed up. It loaded about halfway through and then the screen turned grey and my computer shut itself off. It then turned itself on again and the same thing with the grey screens happened and it turned itself off. It continued like that until I forcefully turned it off. After awhile I managed to turn it on in Safe mode, I did a backup and shut it off for the night. The next day it worked fine. Today the same thing happened again.
I remember before it froze for the first time and I shut it off a window came up that said something about a problem with the graphics. I was using Safari at the time. This time I was typing my password to log in.
Does anyone know what the problem is, and how I can solve it?

hanna.su wrote:
I do that by holding down Command and R when I start it, right? My computer is working fine right now, do you think I should do what you said now or wait until next time this problem happens?
You can do that now.  You cannot do harm to your MBP by executing this procedure.
Ciao.

Similar Messages

  • Macbook Pro Lion shuts off during boot up

    I have a 13" MacBook Pro purchased in 2011.  I had the internet lock up on me and hard shut down the computer.  Now when I press the power button, the machine begins to boot up and the apple pops up then the progress bar pops up and the wheels starts to spin, but the machine shuts down about 5 seconds into it. 
    I have seen this problem on older posts (pre-Lion) and one solution was to hold option during start-up and then boot off th esystem restore disc, but Lion is all internet based, so no disc here.  When I do that, it pops the option to select an internet source, which I do, then the HD symbol pops up with an arrow below it.  When I clikc the arrow (which is the only apparent option) it does the same thing and shhuts off at the same point.
    HELP!

    Try booting with command-R. This will boot into the repair parttion. From here you can run disk utility and other programs. You can also do a repair installation of Lion which will almost certainly solve the problem. Doing so shouldn't wipe out your user data, but installing OS updates will be required.

  • Macbook Pro freezes, shuts off for 10 seconds, and then returns to normal

    My 13.3" Macbook Pro has this issue of shutting off for 10 seconds and then turns back on to normal. Usually it happens whenever I wake the laptop with the lid open, whenever I open the lid "too fast" from clam shell sleep, and whenever I reopen the lid after when I realized that I needed to check something else. Every time I start using the Macbook Pro from these situations, everything works fine for about 20 seconds and then suddenly everything freezes and shuts off temporarily. Then after about 10 seconds, everything turns back on again. I do not know why this occurs, but I had this issue the 3rd week I purchased this. Is this a normal thing or is this an issue with possibly the motherboard?

    take a look at this topic, maybe will help:
    http://discussions.apple.com/thread.jspa?threadID=2420192&tstart=15

  • Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

    Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

    Hmm, good luck then!
    I'm pretty much exactly on the opposite side of the planet, but I've been to Vermont and remember its rural beauty well. However, I can't imagine you having the only Internet connection within a reasonable radius (where "neighbors" hanging off the same ISP don't count). Uh, that note only if your wired connection to the router produces no good result, either...

  • My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up.  help?

    My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up.  help?

    Hi..
    Try Resetting the System Management Controller (SMC)
    If that doesn't help, try Troubleshooting MagSafe adapters
    When you post, please tell us which Mac OS X you have installed. Thanks 

  • MacBook Pro Freezes, Shuts Down, Three Beeps

    Hello, i have been having continuing issues with my MacBook Pro Freezing and not starting up. Sometimes after a slight move or bump it will freeze and not recover, sometimes with three beeps, sometimes not, and sometimes it just immediatly shuts off. It will also do this when it is not bumped, but not as often. I know that the three beeps indicates a memory error, but i have gone through and reseated the RAM and done 10 instances of Memtest while in the command prompt of single-user mode, and it has not indicated any failures. I have also booted into the diagnostics mode on the MacBook and tested the memory and the logig board twice. Still no failures seen. Finally i have verifyed the disk with Disk Utility and found no faults (However one time of my many tries it said that there was a fatal error that must be reparied from the Recovery HD so i booted into recovery and hit repair disk and it said there was nothing wrong, and all of my further attempts have been from the Recovery Partition).
    I am just not convinced that my ram or my logic board is at fault here, and i am definatly not ready to put out the money for them if it will not solve my problem.
    All help is appricieated. Thank You!

    No this is the stock 4GB that shipped with the computer. And the only problem with that technique is that this problem will disappear for almost two weeks and suddenly every time I try to start it it will beep or freeze or if I bump it it will shut off or freeze. And after it acts up for a day or two I could do whatever I want to it and it will show no symptoms.

  • Macbook pro random shut off help

    I have a early 2011 macbook pro
    its been having random shut off problems
    i've tried reinstalling os, updating, resetting smc/pram/nvram
    macbook will randomly shut off, sometimes few minutes into turning it on or hour or 2 of using it, its random
    it'll shut off with the charger connected as well
    it'll also shut off when using the battery, even when its around 90% charged.
    Once it shuts off the battery indicator will show nothing but once pluged in to the charger and reboot, the indicator will show plenty of charge
    is there something wrong with the battery or connection?
    here is my battery log
    Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          201
      Hardware Revision:          000a
      Cell Revision:          165
      Charge Information:
      Charge Remaining (mAh):          4157
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          4393
      Health Information:
      Cycle Count:          483
      Condition:          Service Battery
      Battery Installed:          Yes
      Amperage (mA):          -1047
      Voltage (mV):          12127
    any advice would be greatly appreciated
    thanks

    what is your Full Charge Capacity? you can find it right by the cycle count, whats the status or condition of the battery?
    Does it shut all the way off or is it not waking from sleep???
    Try an SMC reset  http://support.apple.com/kb/ht3964
    run the apple hardware test from the applications install DVD

  • MacBook Pro just shut off, disk utility gives a strange report, please help

    My MacBook Pro just turned off for no reason. I started it back up and in the Finder under devices to the left where it usually says "My Name"'s MacBook Pro, it now has a (2) beside it. I repaired permissions and got the following report:Repairing permissions for “Macintosh HD”
    Reading permissions database.
    Reading the permissions database can take several minutes.
    Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been…
    Warning: SUID file "usr/bin/setregion" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versi…
    Warning: SUID file "System/Library/Printers/IOMs/LPRIOM.plugin/Contents/Ma…
    Group differs on "private/etc/cups", should be 0, group is 26.
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr…
    All of the Warnings end with "and will not be repaired".
    Does anyone have any idea what this might mean?
    Also, when I started it back up, the hard drive made the same sound as when I insert a CD or DVD into the computer.

    the DU warnings are harmless.
    http://support.apple.com/kb/TS1448?viewlocale=en_US
    you could have a hardware problem with your drive though.
    verify the disk (not permissions) using disk utility and if it reports any errors, boot from the leopard install DVD and repair the drive using disk utility there.
    you can change the name of the computer and get rid of (2) in system preferences->sharing.

  • My MacBook Pro shuts off during startup

    When startup the apple logo appears, a spinning gear, and a bar partily filled(10%)
    The bar disappears then reappears and disappears when the bar disappears  the MacBook Pro shut off
    (Haven't updated macbook since bought in 2011)

    Yimajatl,
    boot your MacBook Pro from your grey Mac OS Install DVD. When the desktop appears, select Utilities from the menu bar, and then select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Are you able to reach your login screen now?

  • Macbook pro shuts off during startup

    First I came back to a flashing folder with a question mark in it. I shut down my macbook and tried to start it. It goes through the chime, the grey apple, the spinning gear then the screen goe black and it shuts off.
    I have a macbook pro mid-2010 model.
    thanks for any ideas how to solve this.

    Hi Tewfik,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    A flashing question mark appears when you start your Mac
    http://support.apple.com/kb/ts1440
    Cheers,
    - Judy

  • MacBook shuts off during startup

    I have a macbook I got in 08 that is running leopard. Ok so after running Onyx it told me that the volume needed to be repaired. I inserted the install disk and ran disk utility and the volume repair, but it told me it couldn't be fixed. So I quit out of all that and restarted my laptop, but now it won't get past the blue loading screen. The little wheel just goes and goes then my MacBook shuts off. I can still run the Mac os x installer. When i go again to disk utility I can see the Macintosh hd tab and before I couldn't. Is this a good sign?
    Can anybody please help? Should i just try to do a restore, if it would let me or?? This is my first time dealing with a problem with a mac and I don't even know where to start.

    Thanks for responding. Yes, I have used time machine, although I stopped it from backing up data about a year ago (big mistake). I was wondering if it would be best to restore with time machine or do a restore and then connect the external hd to get my data manually. Because have I changed my login name from the last backup and I don't know if that would cause any extra problems. I really don't want to lose anymore data.
    I was also wondering how to go about using diskwarrior. Is it a separate disk? Because right now I don't know how I would get the install disk to eject from the laptop.

  • My MacBook keeps freezing and crashing during startup and use, what's wrong?

    My MacBook functioned perfectly for YEARS, and suddenly it started freezing during startup. One of four things happens: it starts up no problem, it freezes at the apple logo with the load wheel spinning, it freezes at a 'no' symbol (a circle with a line through it) with the load wheel spinning, or it freezes at a logo which is a folder with a question mark in it. It occasionally goes through and gets to the homepage, where I can use the computer for a certain amount of time before it freezes again. I never get to use it for more than 30 or 45 minutes at a time.
    Yes, I have updated all my software, and I haven't dropped it or downloaded anything that could cause this issue. What could be going wrong? :(

    There are corrupted system files involved, so my suggestion is to reinstall OS X.
    If you are using Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If you are using Leopard or Tiger:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Macbook Pro continually powers off during start up process.

    My daughter's 13" MacBook Pro (late 2011 - MD313B/A) is not completing it's startup process and continually powers off approximately a 1/5th of the way along the startup "process bar".  Unfortunately, I can't obtain any further info regarding the Operating System etc but am assured that all Apple software is up-to-date.  Both basic and enhanced hardware diagnostic checks show no apparent problems.  Apparently, my daughter was downloading an original music CD to her collection last night when the system froze.  She forced a power shut off and are now unable to power the machine up. Unfortunately we are about 6 weeks outside the extended AppleCare Protection Plan period! Any help and guidance would be greatly appreciated.Thanks.

    First try SMC and NVRAM resets:
    https://support.apple.com/en-us/HT201295
    https://support.apple.com/en-us/HT204063
    If there is no change, boot into the recovery partition.
    From the 4 option menu select Disk Utility.
    Run Disk Utility>First Aid,  Verify and Repair.
    If the disk cannot be repaired, it will have to be replaced.
    Ciao.

  • My 13inch MacBook Pro randomly shut off and won't turn on

    My 13 inch MacBook Pro will not turn on at all. It randomly shut off while I was using it and now it won't come back on. The light on the charger is faintly blinking... But it is no longer charging. I tried a different outlet, and a different MacBook charger... Nothing. The screen is completely black and none of buttons or keys are responsive. I'm not sure if this has anything to do with it, but it seems that it shut off not even one second after I connected my iPhone to it via USB. I guess I should include that this was the first time my iPhone was connected to my MacBook since upgrading to ios 6.0. Any help or suggestions would be greatly appreciated. Thank you..

    jc1122,
    by “boot” I mean “use as the disk from which OS X will be run”. At the moment, all that is known is that your computer won’t start from its internal hard disk; my suggestion is to see whether it is able to start from your grey Mac OS X Install DVD, which is bootable (i.e. able to be used a disk from which OS X can be run).

  • MacBook Pro randomly shuts off and restarts a few seconds later

    I brought my computer to the Apple store a couple months ago because the USB port was broken and my computer would randomly shut off. Long story short, they fixed the USB port, deleted all my files, and reinstalled Leopard. The random shut off problem still persists. I have a feeling it has something to do with the graphics card as it seems to happen more frequently when I'm using graphics intensive applications (photoshop, illustrator, autocad through vmware fusion, watching videos on a second screen, etc).
    Has anyone had a similar problem? Should I just bring it to the Genius Bar again?

    I know this is a really old thread, and everyone's probably already bought new computers now. However, I'm still using my 2010 MacBook Pro and have been experiencing this very frustrating issue. However, I think I just found a way to open a finder window that prevents the shut down. In Finder>Preferences>General, under "New Finder windows show", I had "All my files" selected (BAD?), which probably was the cause, because setting that to "Desktop" instead has prevented shut downs, for now. Just thought I should share this tip, in case anyone else suffers from this annoying issue.  If anyone has a better tip or a real fix, please post a reply! There are still people, like myself, working on these older machines who would appreciate the info. THANKS!

Maybe you are looking for

  • Connection Pool establishment problem

    Hi Experts, we have one application with JCo mechanism. For this application, we are using one properties file, which holds ABAP connection information. From this connection information(sapconn.props), we created connection pool and fetching data fro

  • Form content not being received

    I've created a contact form and set the form action to post the formmailer script pasted below. It correctly goes to the "thank you" page I've set up, but I never get anything in my inbox. I've tried including a hidden input field with the email addr

  • Why not all billing documents are posted to CO-PA for condition types?

    Hello! I have following problem. In transaction KE4I I have configured several condition types to post for specific value fields. For some billing types it works but for some doesn't work. For all domestic invoices it works but for abroad invoices it

  • Database search results

    i have a master results page (aspVB) from Dreamweaver 8. have search page from WebAssist Database Search using advanced text search (single search box) question 1 - when a user hits 'enter' on the search page, all records show, no matter if there is

  • All keyboard shortcuts are disabled, and I can't enable them - resetting firefox or safe mode not helping

    For example, Ctrl-T is grayed out / disabled so I can't open a new tab using the keyboard. Ditto for ALL other keyboard shortcuts - they're all disabled / grayed out. PS - I've used Firefox for years, this happened about a month or so ago, and it's b