Macbook Pro Freezes When Connected to iPod Classic!

I have a mid 2010 Macbook Pro that is acting a little funky. Whenever I plug in my iPod Classic to add music everything works perfectly fine until I eject the iPod. My computer then basically freezes up (gives the rainbow spinwheel of death) and it will not recover. The iPod icon doesn't disappear, it just turns light grey and everytime my only option is to force quit iTunes. The problem doesn't end there, my computer is completely bogged down and I have to force shut it down. It is incredibly annoying... The iPod works perfectly fine when I plug it into my fiancee's older Macbook Pro, it ejects fine and I've run disk utility on it using that computer and there are no problems with the iPod. My mid 2010 Macbook Pro runs other USB devices just fine (iPhone, iPad, Flash Drives etc.) it's just the iPod.
Additionally, every since I upgraded to OS X 10.7 the computer will not shut down/restart. It just goes to a grey screen with a spinny wheel and won't fully shut down (I've left it over night to no success still grey screen). I have reinstalled OS X several times so I'm confused on this one as well. Any information on either of these issues would be greatly GREATLY appreciated.

I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

Similar Messages

  • ITunes and Computer freeze when connecting 160GB iPod classic

    160 GB iPod Classic
    Model: MC293LL
    Version: 2.0.4 PC
    iTunes version: 11.1.3
    computers: 1 Win8 desktop,
                     1 Win7 Home Premium, Service Pack 1 Notebook
    since yesterday I started having trouble with my iPod. When connecting it to the Notebook it showed a message: "There's a problem with this device. Scan the drive now and fix it". After clicking on scan and trying to fix the problem the notebook froze, so I connected it to me desktop, and it worked, it said that the problem was fixed. But when trying to open the iTunes it froze and after disconnecting it I realised the music was gone. So I connected it again, the same "There's a problem with this device. Scan the drive now and fix it"-message showed, but at the end the computer said it didn't detect any problem with the drive, so I opened iTunes and restored the iPod, and it worked but after that iTunes froze, then Windows Explorer and then the whole computer. Tried to connect the iPod to the Win7 Notebook and the same thing happened, first iTunes froze and then the computer froze, they both didn't show the blue screen.
    What can I do? The iPod was already restored to the factory settings.

    i had the same problem. all i did was download the newest version of itunes, which i had been putting off for months because it takes so long. after i did this itunes worked fine for me
    hope this helps

  • MacBook Pro freezes when connected to LCD projector

    I just bought this computer in January 2014 and it's running 10.9.4. I am so frustrated because every time I hook it up to the projector where I teach, it hangs and then eventually freezes entirely, prompting a hard reboot. I don't understand why it is doing this to me. I just used it at a conference in March and it didn't do this. But suddenly at this new school, it cannot deal with the projector. I have looked at previous threads with similar titles and they are unresolved. Any ideas?

    here are some of the messages from my console at around the time it failed to connect and then froze.
    Sep 3 2:35:44.690 PM WindowServer[103]: Received display connect changed for display 0x42731c0
    Sep 3 2:35:44.692 PM WindowServer[103]: Found 15 modes for display 0x042731c0 [15, 0]
    Sep 3 2:35:44.741 PM WindowServer[103]: Received display connect changed for display 0x3f003d
    Sep 3 2:35:44.743 PM WindowServer[103]: Found 14 modes for display 0x003f003d [14, 0]
    Sep 3 2:35:44.743 PM WindowServer[103]: Display 0x003f003d changed state to online
    Sep 3 2:35:44.786 PM WindowServer[103]: Received display connect changed for display 0x3f003e
    Sep 3 2:35:44.786 PM WindowServer[103]: Found 1 modes for display 0x003f003e [1, 0]
    Sep 3 2:35:44.787 PM WindowServer[103]: Received display connect changed for display 0x3f003f
    Sep 3 2:35:44.787 PM WindowServer[103]: Found 1 modes for display 0x003f003f [1, 0]
    Sep 3 2:35:44.821 PM WindowServer[103]: MPServiceForDisplayDevice: Invalid device alias (0)
    Sep 3 2:35:44.821 PM WindowServer[103]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 15 modes available
    Main, Active, on-line, enabled, built-in, boot, OpenGL-accel, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
    UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4, ColorProfile { 2, "Color LCD"}
    Sep 3 2:35:44.821 PM WindowServer[103]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000034ab, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Sep 3 2:35:44.821 PM WindowServer[103]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
    off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:44.821 PM WindowServer[103]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000034ab, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Sep 3 2:35:44.822 PM WindowServer[103]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:44.822 PM WindowServer[103]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:44.822 PM WindowServer[103]: Display 0x43800001: GL mask 0x2; bounds (1280, 0)[1280 x 720], 14 modes available
    Active, on-line, enabled, Vendor 170e, Model 0, S/N 0, Unit 1, Rotation 0
    UUID 0x9e557102dcc80bcde4a898a435908d02
    Sep 3 2:35:44.823 PM Dock[235]: Set a breakpoint at CGSLogError to catch errors as they are logged.
    Sep 3 2:35:44.823 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.823 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.823 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.823 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.823 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.823 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.824 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.824 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.824 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.824 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.824 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.824 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.824 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.824 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.824 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.824 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.825 PM Dock[235]: CGSCopyDisplayUUID: Invalid display 0x43800001
    Sep 3 2:35:44.825 PM Dock[235]: uuid_callback_master: failed to retrieve UUID for display 0x43800001 (1001) (invariant failure)
    Sep 3 2:35:44.908 PM WindowServer[103]: Display 0x042731c0: Unit 0: Mode 1280 x 720, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80007008, ioModeDepth 0x0, IOReturn 0x0
    Sep 3 2:35:44.959 PM WindowServer[103]: hw_mirror_device_if_possible: windowserver picks master 0x43800001 as primary (driver did not pick)
    Sep 3 2:35:44.959 PM WindowServer[103]: Display 0x042731c0: Unit 0: Startup Mode 1280 x 720, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80007008, ioModeDepth 0x0, IOReturn 0x0
    Sep 3 2:35:44.960 PM WindowServer[103]: Display 0x43800001: Unit 1: Startup Mode 1280 x 720, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80007004, ioModeDepth 0x0, IOReturn 0x0
    Sep 3 2:35:44.960 PM WindowServer[103]: Display mode changed
    Sep 3 2:35:44.960 PM WindowServer[103]: Display added
    Sep 3 2:35:44.960 PM WindowServer[103]: Display removed
    Sep 3 2:35:44.960 PM WindowServer[103]: Displays mirrored
    Sep 3 2:35:44.962 PM WindowServer[103]: Display 0x43800001: GL mask 0x2; bounds (0, 0)[1280 x 720], 14 modes available
    Master in mirror set; Main, Active, on-line, enabled, Vendor 170e, Model 0, S/N 0, Unit 1, Rotation 0
    UUID 0x9e557102dcc80bcde4a898a435908d02
    Sep 3 2:35:44.962 PM WindowServer[103]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fe9b9412310) - enabling OpenGL
    Sep 3 2:35:44.962 PM WindowServer[103]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000034ab, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Sep 3 2:35:44.962 PM WindowServer[103]: Display 0x042731c0: GL mask 0x1; bounds (0, 0)[1280 x 720], 15 modes available
    Hardware mirror of 0x43800001; on-line, enabled, built-in, boot, Vendor 610, Model 9cc7, S/N 0, Unit 0, Rotation 0
    UUID 0xcb5a19e16c20c98ebb2d70fc3bb550b4, ColorProfile { 2, "Color LCD"}
    Sep 3 2:35:44.963 PM WindowServer[103]: Display 0x003f0040: GL mask 0x10; bounds (2304, 0)[1 x 1], 2 modes available
    off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:44.963 PM WindowServer[103]: GLCompositor: GL renderer id 0x01024400, GL mask 0x0000001f, accelerator 0x000034ab, unit 0, caps QEX|MIPMAP, vram 1024 MB
    texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    Sep 3 2:35:44.963 PM WindowServer[103]: Display 0x003f003f: GL mask 0x8; bounds (2305, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:44.963 PM WindowServer[103]: Display 0x003f003e: GL mask 0x4; bounds (2306, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    Sep 3 2:35:45.123 PM WindowServer[103]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x43800001 device: 0x7fe9b9412310  isBackBuffered: 1 numComp: 3 numDisp: 3
    Sep 3 2:35:46.741 PM WindowServer[103]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Sep 3 2:35:46.787 PM WindowServer[103]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Sep 3 2:35:46.845 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:46.908 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:46.921 PM WindowServer[103]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Sep 3 2:35:46.925 PM WindowServer[103]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    Sep 3 2:35:46.957 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:46.958 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:46.984 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:46.985 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:47.021 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:47.022 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:47.054 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:47.055 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:47.073 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:47.074 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:47.102 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:47.103 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:47.141 PM WindowServer[103]: Display 0x43800001: Unit 1; ColorProfile { 3, "Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    Sep 3 2:35:47.142 PM WindowServer[103]: Display 0x042731c0: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
    Sep 3 2:35:48.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
    Sep 3 2:35:49.354 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1244]) Exited with code: 1
    Sep 3 2:35:49.354 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:35:59.415 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1245]) Exited with code: 1
    Sep 3 2:35:59.415 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:09.423 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1247]) Exited with code: 1
    Sep 3 2:36:09.423 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:11.079 PM mds[40]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1801
    Sep 3 2:36:11.463 PM mds[40]: (Normal) ImportServer: Ignoring blacklisted Spotlight importer plugin:/Developer/Applications/Xcode.app/Contents/Library/Spotlight/SourceCode. mdimporter uuid:548A3091-3C5D-498A-A329-B532A6C896BB version:1801
    Sep 3 2:36:19.463 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1250]) Exited with code: 1
    Sep 3 2:36:19.463 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:29.536 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1251]) Exited with code: 1
    Sep 3 2:36:29.536 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:39.578 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1253]) Exited with code: 1
    Sep 3 2:36:39.578 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:49.641 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1254]) Exited with code: 1
    Sep 3 2:36:49.641 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:36:59.719 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1255]) Exited with code: 1
    Sep 3 2:36:59.719 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:37:09.795 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1257]) Exited with code: 1
    Sep 3 2:37:09.795 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:37:19.863 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1258]) Exited with code: 1
    Sep 3 2:37:19.863 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:37:29.939 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1259]) Exited with code: 1
    Sep 3 2:37:29.939 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:37:40.019 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1261]) Exited with code: 1
    Sep 3 2:37:40.019 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:37:50.090 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1262]) Exited with code: 1
    Sep 3 2:37:50.090 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:00.168 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1263]) Exited with code: 1
    Sep 3 2:38:00.168 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:10.240 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1265]) Exited with code: 1
    Sep 3 2:38:10.240 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:20.318 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1266]) Exited with code: 1
    Sep 3 2:38:20.318 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:30.399 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1267]) Exited with code: 1
    Sep 3 2:38:30.399 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:40.467 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1269]) Exited with code: 1
    Sep 3 2:38:40.467 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:38:50.548 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1270]) Exited with code: 1
    Sep 3 2:38:50.548 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:39:00.609 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1271]) Exited with code: 1
    Sep 3 2:39:00.609 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:39:10.680 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1273]) Exited with code: 1
    Sep 3 2:39:10.680 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:39:20.763 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1274]) Exited with code: 1
    Sep 3 2:39:20.763 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:39:30.842 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd[1275]) Exited with code: 1
    Sep 3 2:39:30.842 PM com.apple.launchd.peruser.501[173]: (com.lexmark.bmlaunchd) Throttling respawn: Will start in 10 seconds
    Sep 3 2:40:21.000 PM bootlog[0]: BOOT_TIME 1409769621 0

  • Computer is crashing (freeze) when connecting my iPod Nano

    Hello,
    my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Itunes freezes when connect my ipod

    When connect My ipod Classic to itunes, itunes freezes and when disconect the ipod, itunes restabilized. I try uninstall all apple software in my pc, but no work. This problem continue in others computers
    Sorry for my english, i speak spanish... HELP
    EDIT: Ah! When connect mi iPhone is work correct, the problem is con my iPod. It's work perfect in hard disk mode, not know

    Similar problem here:
    When I'm playing songs with iTunes and connecting my 3G 20GB iPod, my computer will hang up completely - screen goes dark and I have to reset my PC.
    However, when my iTunes is "idle", i.e. not playing a song or doing anything else, connecting and syncing the iPod will work just fine.
    I'm using the newest (6.x) Version of iTunes on WinXP SP2 with a 3G iPod 20GB.
    Martin

  • I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

  • My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

    My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

    Usual first things to try are a smc and pram reset.

  • My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

    my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Why does my macbook pro freeze when updating my iPhone to iOS 4

    when i try to uodate my iphone 4 to ios 5, my macbook pro freezes up in itunes and i cant use it. i try to close out but nothing works, it cant force quit, and it just doesnt like me. please help!

    Everyone is trying to update their iPhones. The servers get clogged. Wait several days and try to do it at an off peak time.

  • MacBook Pro crashes when connecting via external modem

    My new MacBook Pro crashes when I try to connect to the Internet via an external modem. Is it a SW or HW problem? In the latter case might it by the computer or the modem (original).
    Sarah
    MacBook Pro 1,1   Mac OS X (10.4.6)  

    This is Bob Simpson again from Paris. I followed the advice given in this forum and took out the set of HP printer drivers from the drivers pre-installled in my MacBook Pro and put them on my desktop. After that, the modem worked perfectly. If I want to use my HP Laserjet 1200 printer, I plug it into a USB port on the computer, the computer recognizes it and prints. If I want to use the modem again, I have to take that printer out of my list of printers in the print center. This is a bit of a pain in the neck, but it works. No one at any of the Apple distributers or Apple Care centers was able to figure all this out. Our forum did the job and we should get free awards from Apple, like the installation of the update on all our computers that will settle this problem. Otherwise, my BMacBook pro works like a dream. Many thanks to all of you and jackplug, you don't have to throw away your printer.

  • Macbook Pro Freezes When USB Plugged In

    Just like the title says, my Mid 2012 Macbook Pro 13 running 10.8.2 freezes for an averge of 15 seconds whenever I plug anything into the USB ports. It varies depending on what is plugged in. Phones, both iPhone and Android make it freeze for about 15 seconds, USB drives are usually just a couple seconds. I dont even know where to begin when trouble shooting this. Any ideas? Thanks in advance.

    Hi guys,
    I have the same problem with my MacBook Pro. When I plug in any usb device I get a short freeze of the pc for about 5 seconds. During my tests, I noticed that the freezing starts from the first time that i move the touchpad. It means that if I plug the usb device and I move the touchpad after 30 seconds, I get the freazing from that time for 5 seconds. if I continue to move the touchpad while I plug in the usb I don't get any freeze. Moreover, I noticed that if in the meantime that I plug in the usb I move the touchpad without any interruption, I don't get any freezing.
    I don't know if the problem could be related to the touchpad or not... Help!!!
    Here my log:
    24/02/2013 22:12:44.000
    kernel[0]
    USBMSC Identifier (non-unique): 088810000000 0x1f75 0x888 0x15
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Mounted /dev/rdisk3s1 (Read-Write, label "Data HD", NTFS 3.1)
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners,nosuid,adap tiveuid,adaptivegid
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners ,nosuid,allow_other,nonempty,relatime,fsname=/dev/disk3s1,volname=Data HD
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    License: Valid.
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Ownership and permissions disabled, configuration type 1
    24/02/2013 22:12:45.991
    fseventsd[44]
    check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x1041d1528)
    24/02/2013 22:12:46.076
    fseventsd[44]
    log dir: /Volumes/Data HD/.fseventsd getting new uuid: C8912524-D7CB-46FE-99AE-420260B97608
    24/02/2013 22:12:50.000
    kernel[0]
    USBF:
    107857.423
    AppleUSBEHCI[0xffffff8014dc8000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1d, timing out! (Addr: 2, EP: 0)
    24/02/2013 22:12:50.511
    hidd[43]
    MultitouchHID: device bootloaded
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

  • MacBook Pro Freezes When Viewing Any Video with new iTunes

    I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

    Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

  • MacBook Pro freezes when trying to shutdown

    My macbook pro freezes and the screen turns blank when i try to turn it off. instead i have to hold down the power button and get the "mac os x shut down or something" message. it happens randomly and i cant figure out what to do. i have tried all of the restarts and have done a virus scan, although i know macs dont get viruses. any help?
    2.2 GHz, 2 GB, 128 Video RAM, 15in Leopard, Intel Core 2 Duo

    Please post the specs of your macbook pro including hard drive size and amount of free space, graphics card, and installed RAM.  This will help folks help you.

  • Macbook Pro freezes when iphone connected

    I am running  OSX 10.8.5 on my mid-2012 Macbook Pro 15-inch. I have iphone 5 running 7.0.4. When I plug my iphone into my mac, my macbook freezes causing me to manually hard shutdown. I recently updated to 7.0.4. I noticed thats when my problems started. I have the 1TB hard drive. I have the 8GB RAM. When I plug my iphone in, iphoto comes up usually causing the entire system to freeze. No other problem works.

    I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

  • Macbook Pro freezes when I plug in USB

    I've not changed anything about my Macbook Pro (13" early 2011) except upgrade to Mountain Lion (10.8.2) and now when I plug in my USB hub (which only has my keyboard, mouse and printer connected to it) the computer freezes completely and I have to press and hold the power button to restart it. If it doesn't do that, then it just doesn't recognise that the USB has been plugged in at all.
    Is this an issue with the USB port or something else? I still have AppleCare so will take it to an Apple Store if I can't find out how to solve this problem myself. Anyone had this issue and found a solution?
    Thanks.

    Did you also try this when booted to the Recovery HD volume? If not then give this a try. In addition, while troubleshooting unplug all USB devices (includeing the keyboard) and try with another device such as only the mouse, which should allow you to move the cursor on screen. What you've done so far is only half of the picture, and doing this with the mouse both in normal boot and when booted to the Recovery HD partition would help determine what the problem is.
    It is sounding like the issue is not with the printer and instead is with your computer, so hopefully its just a software configuration snafu, but it could be a problem with hardware.
    If you find the mouse will not properly work in any port when booted to the Recovery HD partition, then run the Apple Hardware Test suite (see here: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/, but do not run the "extended" test) and see if they bring up any problems. If so then write them down and post what they are here.

Maybe you are looking for

  • Corruption in LR Develop mode

    Greetings, I'm on a Mac Power PC running OS 10.5.5 with 6.5 GB RAM on LR 2.1. I am shooting with a Canon 1ds III on SanDisk Extreme IV 4.0 GB cards. Sometimes I get a rainbow-colored corruption on part or most of an image while working with an image

  • Unable to Move Apple Apps in App Folder

    I had to replace a failing disk in my computer since it's SMART "failing" status made Lion refuse to install. I did a clean install of OS X Lion on my Unibody MBP13" (2009) with a new Hard Drive about a week ago. I then migrated all my Apps, Settings

  • Sd-examples

    hi, can anyone tell me real time scenario for individual purchase order as well as difference between scheduling agreement and contract ganesh Message was edited by:         ganesh ram

  • Update Error Tansaction code FB01

    Hi Sap Gurus, In batch input session of accounting documents via FB01, batch input session log showed " UPDATE ERROR, TRANSACTION FB01, no. in session 000001", Message number is 00373. Users are asking why is there an update error ?

  • Need help on xml query.

    pls click here to sample of xml data http://pcls1.craftyclicks.co.uk/xml/rapidaddress?postcode=AA11AA I make the following query to retrive values of xml data select x1.org,x1.org2,x1.org3,x1.org4,x1.org5 from xml_data_tab x, xmltable('/CraftyRespons