Macbook pro freezes when turning on

i downloaded lion without any problem. however, 9 times out of 10, when i turn on the machine, the password panel comes on the screen and i can do nothing but look at it. i cannot type my password in the space. cannot use any function. the computer is inoperable. the resolve is to push the on button until it turns off. then wait 10 seconds or so and try again. once i hit the 1 out of 19 try, i can use the computer with no problem at all. this situation had never happened until i installed lion. has nayone experienced this? anyone have a solution? 

I'd check by manually in the airport utility to make sure my setting are correct. I have two airport extreme N routers with two Express including 24/7 printing , two airtunes and x-box360 working. My network has been solid for two years. Recently we connected that x-box360 and had problems making it work. It works now but I did make mistakes when trouble shooting and noticed that anything I did when using any application that interfaced with those routers was either sputtering or seemed locked up. Once I corrected my network mistake all is back to normal.

Similar Messages

  • My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this

    My 13 inch macbook pro freezes,when i use the magic mouse.pleae any help to resolve this.My OS is OS X 10.6.8.

    Usual first things to try are a smc and pram reset.

  • My macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

    my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?

    The next time you have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • MacBook Pro Freezes When Viewing Any Video with new iTunes

    I, too, am having problems with the latest iTunes update. My MacBook Pro freezes completely. Total lock-up. This happens when trying to view any video, including video podcasts. I have to hold down the power button for several seconds to get my laptop to turn off. Any other MBP users experiencing this?

    Hi there, I have the same problem as you guys, everything was fine before iTunes 7.6 or iTunes 7.6.1 I tried both, before those updates I could watch any video in iTunes without any issue, after that when I play a video, a random video my Macbook freeze totally, sometimes comes alive but 90% of the cases I have to make a hard shutdown (press and hold the power button). I can't believe this kind of bugs in a software that is so mature. Help please!

  • MacBook Pro freezes when trying to shutdown

    My macbook pro freezes and the screen turns blank when i try to turn it off. instead i have to hold down the power button and get the "mac os x shut down or something" message. it happens randomly and i cant figure out what to do. i have tried all of the restarts and have done a virus scan, although i know macs dont get viruses. any help?
    2.2 GHz, 2 GB, 128 Video RAM, 15in Leopard, Intel Core 2 Duo

    Please post the specs of your macbook pro including hard drive size and amount of free space, graphics card, and installed RAM.  This will help folks help you.

  • Why does my macbook pro freeze when updating my iPhone to iOS 4

    when i try to uodate my iphone 4 to ios 5, my macbook pro freezes up in itunes and i cant use it. i try to close out but nothing works, it cant force quit, and it just doesnt like me. please help!

    Everyone is trying to update their iPhones. The servers get clogged. Wait several days and try to do it at an off peak time.

  • Macbook Pro Freezes When USB Plugged In

    Just like the title says, my Mid 2012 Macbook Pro 13 running 10.8.2 freezes for an averge of 15 seconds whenever I plug anything into the USB ports. It varies depending on what is plugged in. Phones, both iPhone and Android make it freeze for about 15 seconds, USB drives are usually just a couple seconds. I dont even know where to begin when trouble shooting this. Any ideas? Thanks in advance.

    Hi guys,
    I have the same problem with my MacBook Pro. When I plug in any usb device I get a short freeze of the pc for about 5 seconds. During my tests, I noticed that the freezing starts from the first time that i move the touchpad. It means that if I plug the usb device and I move the touchpad after 30 seconds, I get the freazing from that time for 5 seconds. if I continue to move the touchpad while I plug in the usb I don't get any freeze. Moreover, I noticed that if in the meantime that I plug in the usb I move the touchpad without any interruption, I don't get any freezing.
    I don't know if the problem could be related to the touchpad or not... Help!!!
    Here my log:
    24/02/2013 22:12:44.000
    kernel[0]
    USBMSC Identifier (non-unique): 088810000000 0x1f75 0x888 0x15
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Version 2012.3.3 (Jul 26 2012 08:57:03) external FUSE 27
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Mounted /dev/rdisk3s1 (Read-Write, label "Data HD", NTFS 3.1)
    24/02/2013 22:12:45.770
    tuxera_ntfs[8574]
    Cmdline options: recover,cbcio,sfmconv,streams_interface=openxattr,native_xattr,nfconv,aligned_i o,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners,nosuid,adap tiveuid,adaptivegid
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Mount options: native_xattr,fstypename=txantfs,fssubtype=0,iosize=1048576,local,nodev,noowners ,nosuid,allow_other,nonempty,relatime,fsname=/dev/disk3s1,volname=Data HD
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    License: Valid.
    24/02/2013 22:12:45.771
    tuxera_ntfs[8574]
    Ownership and permissions disabled, configuration type 1
    24/02/2013 22:12:45.991
    fseventsd[44]
    check_vol_last_mod_time:XXX failed to get mount time (22; &mount_time == 0x1041d1528)
    24/02/2013 22:12:46.076
    fseventsd[44]
    log dir: /Volumes/Data HD/.fseventsd getting new uuid: C8912524-D7CB-46FE-99AE-420260B97608
    24/02/2013 22:12:50.000
    kernel[0]
    USBF:
    107857.423
    AppleUSBEHCI[0xffffff8014dc8000]::Found a transaction which hasn't moved in 5 seconds on bus 0x1d, timing out! (Addr: 2, EP: 0)
    24/02/2013 22:12:50.511
    hidd[43]
    MultitouchHID: device bootloaded
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::message - kIOUSBMessagePortHasBeenReset.
    24/02/2013 22:12:50.000
    kernel[0]
    AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

  • Macbook Pro freezes when I unplug USB hub

    When I unplug my USB hub from my Macbook Pro it freezes up and I have to turn it off and back on. I did not have this problem before, it just starting happening recently. The only thing plugged into the hub at the moment is my keyboard which has the wireless reciever for my mouse plugged into it. Any solutions would be greatly appreciated as this makes it a hassle to take my Macbook anywhere.
    The USB hub is Gigaware brand, my keyboard is Apple, and my mouse is a Logitech MX Revolution, if that helps. I also have a LaCie 1tb external hard drive plugged in but that's using the firewire 800 slot so I wouldn't think that would affect it.

    I have a somewhat similar problem with my Macbook Pro and USB hub - it just started happening last week as well. I have a USB (external power) hub that hooks to an audio interface, piano keyboard, wireless keyboard and mouse. I normally have my laptop off when I hook up the hub because I've been traveling. Last week I plugged it in while the computer was on and the hub froze. I turned off the computer and unplugged everything. I turned everything back on and the hub worked...for a few minutes. Now anytime I run any type of audio or video from the computer (itunes, LogicPro, internet video) the hub freezes as soon as I press play. Then the program (like Itunes) freezes and I have to force quit. This makes me wonder if it is not the hub but something that the computer is using to run audio and video. None of my external equipment has caused problems for a year now - there is no new equipment - and just the standard Mac software updates.

  • Macbook Pro freezes when disconnected from Internet

    I'm so frustrated, I was doing important work and now I'm about to pull my hair out, I need to finish what I was doing but I can't even turn on my computer without it freezing, I literally can't even move the mouse because it freezes right on loading screen every time I restart, here's the story.
    I disconnected the Internet for just a few seconds, then the computer froze. So naturally I restarted the computer, but each time I restart, it just freezes, I can't move the mouse, I can't click on anything, it's just frozen. Let me know how frustrating that is that you don't have computer access after working on important files.
    I have a 2008 non unibody Macbook pro with OS X mavericks, I knew the computer froze when I turned off wifi, but I correlated that with the app that I was running, since I wasn't running the app this time, I thought I could turn off wifi no problem.
    But like I said, now I can't even restart or use it at all. I can't even use safe mode because it freezes there too. I can do the cmd+shift+ctrl+r thing and I can connect to the Internet that way, but there's nothing I can do from there. Once I restart, the Internet connection is still disconnected in the main operating system.

    Okay I solved the problem. For anyone who runs across this issue in the future, here is the solution:
    Step 1) Turn on the computer and hold CMD + Option + S, this will boot the computer into single user mode
    Step 2) Type in "Mount -uw /"
    Step 3) Type in "vi /Library/Preferences/SystemConfiguration/preferences.plist"
    Step 4) Scroll down until you find this part:
    <key>Interface</key>
    <dict>
            <key>en1</key>
            <dict>
                    <key>AirPort</key>
                    <dict>
                            <key>JoinModeFallback</key>
                            <array>
                                    <string>DoNothing</string>
                            </array>
                           <key>PowerEnabled</key>
                            <false/>
                            <key>RememberJoinedNetworks</key>
                            <true/>
                            <key>RequireAdminIBSS</key>
                            <false/>
                            <key>RequireAdminNetworkChange</key>
                            <false/>
                            <key>RequireAdminPowerToggle</key>
                            <false/>
                    </dict>
            </dict>
    </dict>
    Step 5: Edit the part where it says:
    <key>PowerEnabled</key>
    <false/>
    and change it to <true/>
    Step 6: Hit Ctrl + X, hit Y for Yes, press enter.
    Step 7: RESTART AND YOU HAVE YOUR COMPUTER BACK!!
    I panicked by the way because as someone said earlier, it's nearly impossible to fix:
    You cannot fix this problem with Safe Boot, Repair Permissions, Repair Disk, re-install Mavericks, restore from Time Machine backup, reset the SMC, reset PRAM, or boot into single-user mode.  Thus far, the only solution is to boot from a (homemade) Install OS X Mavericks USB, erase the hard drive, perform a clean Mavericks install, re-install your applications, and manually restore your data.
    Anyway I'm thankful for Ira Wolf 81 for figuring out, he deserves all the credit for this, I merely repeated his steps and found out he was right. Cheers.

  • Macbook Pro freezes when iphone connected

    I am running  OSX 10.8.5 on my mid-2012 Macbook Pro 15-inch. I have iphone 5 running 7.0.4. When I plug my iphone into my mac, my macbook freezes causing me to manually hard shutdown. I recently updated to 7.0.4. I noticed thats when my problems started. I have the 1TB hard drive. I have the 8GB RAM. When I plug my iphone in, iphoto comes up usually causing the entire system to freeze. No other problem works.

    I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

  • Macbook Pro Freezes When Connected to iPod Classic!

    I have a mid 2010 Macbook Pro that is acting a little funky. Whenever I plug in my iPod Classic to add music everything works perfectly fine until I eject the iPod. My computer then basically freezes up (gives the rainbow spinwheel of death) and it will not recover. The iPod icon doesn't disappear, it just turns light grey and everytime my only option is to force quit iTunes. The problem doesn't end there, my computer is completely bogged down and I have to force shut it down. It is incredibly annoying... The iPod works perfectly fine when I plug it into my fiancee's older Macbook Pro, it ejects fine and I've run disk utility on it using that computer and there are no problems with the iPod. My mid 2010 Macbook Pro runs other USB devices just fine (iPhone, iPad, Flash Drives etc.) it's just the iPod.
    Additionally, every since I upgraded to OS X 10.7 the computer will not shut down/restart. It just goes to a grey screen with a spinny wheel and won't fully shut down (I've left it over night to no success still grey screen). I have reinstalled OS X several times so I'm confused on this one as well. Any information on either of these issues would be greatly GREATLY appreciated.

    I should add that I can quit iTunes with the iPod connected. When I try to eject the iPod by manually dragging the icon to the trash the funkiness begins (icon doesn't disappear just turns light grey, and the computer freezes). I have found the computer behaves if I put it to sleep with the iPod connected (the iPod will eject properly) and when I wake the computer up, everything works w/o funkiness, however the greyed out iPod icon will still be on the desktop. This is the only way I've found to be able to manage this iPod when connected to this MBP.

  • MacBook Pro freezes when returning from sleep

    I recently started using a Kensington Bluetooth mouse with my MacBook Pro and the computer freezes whenever I return the computer from sleep. Nothing happens when I press Command-Option-Esc. The mouse pointer moves on the screen and the dock magnification works, but I'm not able to open any programs.
    I've confirmed that it has something to do with Bluetooth because I now turn off Bluetooth before returning it to sleep and it works fine. I just have to turn on Bluetooth using the trackpad and then I can use the mouse again. I'm thinking that this shouldn't be a requirement though.
    Has anyone else had this problem? Is there anything I can do to resolve?
    I appreciate any assistance!
    Thank you,
    Chris
    Mouse: Kensington PilotMouse Mini Bluetooth
    Bluetooth Version: 3.1965 (3.1965)

    For those of you who are interested, I think I've isolated the issue. If I turn off the option to allow Bluetooth devices to wake the computer from sleep, my computer doesn't freeze when I return from sleep. This is a better option for me than turning off Bluetooth before I put the computer to sleep.
    Let me know if you have any questions.

  • MacBook Pro Freezes when Screensaver is on for a while...

    Hello all,
    I am experiencing a quite odd issue... I have the most basic, natively-distributed screensaver for my MacBook Pro. Lately, when the screensaver runs for a while, the mac freezes... I have to shut it down by pressing continuously the Power On/Off button... Then, it has some difficulty to 'find' the Hard Disk... The 'swirl' icon in the grey screen freezes as well... So I have to turn it off, wait for a couple of minutes, then turn it on again and... voila! It works... I reset the PRAM, nothing has changed... Any ideas please? I am covered by Apple Care 3-year warranty; is it worth to taking it to the Apple Store in London? Many thanks!

    It could also be a heat issue. Macs are designed to performa safety shutdown if the temps approcah a level that could damage something. For the CPU in a silver-keyboard MBP, its around 100C/212F.
    Like you. I try to run simple 2D savers that don't overwork the CPU and GPU but even they can cause some heat. Is the bottom of the case on a hard surface so air can flow beneath? Is the hinge area on the back edge unobstructed? The back edge is an important heat outlet.
    Have you used Activity Monitor (or "AM"--it's in Applications > Utilities) to see if a background process is eating up processor cycles and therefore making more heat? If you've not used AM before, be sure to change its' "Show" window (upper right edge of the application window) from the default of "My Processes" to "All Processes" to get the big picture.
    You can check temps with this free DashBoard widget:
    http://www.apple.com/downloads/dashboard/status/istatpro.html

  • Macbook Pro freezes when I plug in USB

    I've not changed anything about my Macbook Pro (13" early 2011) except upgrade to Mountain Lion (10.8.2) and now when I plug in my USB hub (which only has my keyboard, mouse and printer connected to it) the computer freezes completely and I have to press and hold the power button to restart it. If it doesn't do that, then it just doesn't recognise that the USB has been plugged in at all.
    Is this an issue with the USB port or something else? I still have AppleCare so will take it to an Apple Store if I can't find out how to solve this problem myself. Anyone had this issue and found a solution?
    Thanks.

    Did you also try this when booted to the Recovery HD volume? If not then give this a try. In addition, while troubleshooting unplug all USB devices (includeing the keyboard) and try with another device such as only the mouse, which should allow you to move the cursor on screen. What you've done so far is only half of the picture, and doing this with the mouse both in normal boot and when booted to the Recovery HD partition would help determine what the problem is.
    It is sounding like the issue is not with the printer and instead is with your computer, so hopefully its just a software configuration snafu, but it could be a problem with hardware.
    If you find the mouse will not properly work in any port when booted to the Recovery HD partition, then run the Apple Hardware Test suite (see here: http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/, but do not run the "extended" test) and see if they bring up any problems. If so then write them down and post what they are here.

  • MacBook Pro freezes when I try to open anything

    Whenever I boot up my MacBook Pro, I let it warm up for about 5 minutes. Then, when I try and click and click on anything, like the browser, the whole computer freezes and the only thing I can do is force it to shut down by holding down the power button. Then I boot up into safe mode, restart the computer and everything works fine. Anything know what the problem is? Thanks

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for

  • Error in Custom Function Module

    Hi, I am working on implementing General Ledger Business content in financial Accounting. We had a requirement of creating a Custom Virtual cube similar to 0FIGL_V10. Hence, we had copied the standard function module RS_BCT_FIGL_DATA_GET_VC10 and cre

  • IIS Error

    What is the reason for this error. I am unable to open the CCMadmin page. https 500 internal server error

  • Spry Menu Bar - No Formatting

    I build several sites on Dreamweaver CS3. I decided I wanted to add Spry Menu Bar to one of them.  When I try, I get no formatting at all, just a list of text menu items.  Everything else is normal, but there is no menu bar, it displays instead as so

  • AE CS6 crashing on roto brush

    AE CS6 MacBook Pro mid-2013 AE keeps crashing with the error starting with "140735236084496> <ae.blitpipe> <2> Making New Context" whenever I try to use the Roto Brush on a MPEG clip. Sorry, I don't know what other information is relevant to you to h

  • How do I open raw files taken with Canon 70D.  Not supported in Elements 12.  Is there a download?  Thanks.

    How do I open raw files taken with a Canon 70D?  Elements 12.  Version 8.0 Windows 7 64 bit.  Thanks in advance for any help. JWT Lamar, CO