MacBook Pro Froze During Windows Installation

I am running Mavericks lastest update on mid-2012 MacBook Pro.  I was installing Windows and following the directions provided in the Apple Support Communities.........the MacBook froze during the installation of Windows after I answered the prompt about the size of the partition........800 GhB for Mac and 200GhB for Windows 7.  I now have a blank grey screen on the MacBook.  I get the Apple boot-up when I press the Power up button but nothing happens.
How can I reboot and start the installation over?
Thanks very much.

Correction:  I get the Apple boot-up sound when I press the Power button but nothing then happens other than the same grey screen.

Similar Messages

  • Macbook pro froze during partition. after force shut down it, a part of hard drive lost

    2011 15' Macbook Pro with Mountain Lion.
    I was trying to use Bootcamp to install windows. Somehow I got confused and used disk utility to partition my hard drive and get 100gb for windows (before that it was 500 gb with 260gb free). And after 10 minutes the computer froze and I could do nothing but force shut down it. Rebooted and disk utility shows that it has 160 gb free space now. I repaired disk and permissions but none of them worked.
    How can I get my 100 gb back? Help pls
    Thanks

    Check this link and see it any info will help.
    http://pondini.org/OSX/DU.html
    edit: added this discussion.
    https://discussions.apple.com/message/19213226#19213226

  • MacBook Pro froze during software update, now it's stuck at gray screen

    My MacBook Pro was running a little slow today so I did a Disk Utility repair and that went fine then I did a software update (OS X, Java and remote desktop) but it froze during the last ten percent of the update install and now when I boot up it won't get past the gray apple screen. I tried to restore Lion but since I bought this used my Apple ID wasn't used to purchase Lion so I can't do a restore.
    I've tried to safe boot and boot from a CD but no go.
    I also tried the short and long Apple hardware tests and those found no problems

    In case anyone else needs an answer to this, I called in to Apple. Tech support said to power it off and let it reboot itself. I had to go back into updates and tell it to finish the install (restart computer, was the only step remaining) and it worked fine. It took longer because it had gotten hung up during the previous restart. ( Just to clarify, I was stuck on the grey screen after the restart step of the install.)

  • Macbook Pro Crash during Update Installation

    Hello All,
    I currently have a 15-inch early 2011 model macbook pro that is not functioning as it should be. For the past few weeks my mac has randomly shut off and given me the message "Your Computer Restarted Because of a Problem." With that said I began to take note as to when this was occuring and realized that anytime I tried to install new software or updates it would immediately shut the computer down after starting the install process. When I tried to install updates on my computer in an effort to combat the issue it would simply shut down during that install process as well.
    Below is my most recent Panic Log:
    Tue Mar 26 18:53:25 2013
    panic(cpu 1 caller 0xffffff800e4ac90b): Releasing non-exclusive RW lock without a reader refcount!
    Backtrace (CPU 1), Frame : Return Address
    0xffffff812fbfb820 : 0xffffff800e41d626
    0xffffff812fbfb890 : 0xffffff800e4ac90b
    0xffffff812fbfb8b0 : 0xffffff800e51c09c
    0xffffff812fbfbae0 : 0xffffff800e508fab
    0xffffff812fbfbb90 : 0xffffff800e4fbb49
    0xffffff812fbfbc40 : 0xffffff800e4fc314
    0xffffff812fbfbf50 : 0xffffff800e7e182a
    0xffffff812fbfbfb0 : 0xffffff800e4ced33
    BSD process name corresponding to current thread: installd
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000000e200000
    Kernel text base: 0xffffff800e400000
    System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
    System uptime in nanoseconds: 319123625868
    last loaded kext at 98271975427: com.kaspersky.kext.kimul.44          44 (addr 0xffffff7f907e4000, size 45056)
    loaded kexts:
    com.kaspersky.kext.kimul.44          44
    org.virtualbox.kext.VBoxNetAdp          3.2.6
    org.virtualbox.kext.VBoxNetFlt          3.2.6
    org.virtualbox.kext.VBoxUSB          3.2.6
    org.virtualbox.kext.VBoxDrv          3.2.6
    com.paceap.kext.pacesupport.snowleopard          5.8
    com.serato.usb.kext          2.3.0
    com.kaspersky.nke          1.0.1d41
    com.kaspersky.kext.klif          3.0.0d23
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.1f2
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.kext.AMDFramebuffer          8.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.AMDRadeonAccelerator          1.0.0
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleIntelHD3000Graphics          8.0.0
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleMuxControl          3.2.11
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
    com.apple.iokit.IOBluetoothUSBDFU          4.0.9f33
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleUSBTCButtons          235.4
    com.apple.driver.AppleUSBTCKeyEventDriver          235.4
    com.apple.driver.AppleUSBTCKeyboard          235.4
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AirPort.Brcm4331          602.15.22
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleUSBUHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.iokit.IOAcceleratorFamily          19.0.26
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.kext.AMD6000Controller          8.0.0
    com.apple.kext.AMDSupport          8.0.0
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMultitouch          235.7
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.1.1
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.1
    com.apple.iokit.IOUSBFamily          5.4.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7.2
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My MacBook Pro froze during software update 10.9.2. What do I do?

    My current operating system is 10.9.1 and I downloaded the 10.9.2 update. I am now stuck on the Installing Software Update screen that appears during reboot. I have been stuck here for about an hour and don't know what to do. Help, please!

    In case anyone else needs an answer to this, I called in to Apple. Tech support said to power it off and let it reboot itself. I had to go back into updates and tell it to finish the install (restart computer, was the only step remaining) and it worked fine. It took longer because it had gotten hung up during the previous restart. ( Just to clarify, I was stuck on the grey screen after the restart step of the install.)

  • MacBook Pro Core i7 + Windows 7 Bootcamp issues

    I recently bought a brand new MacBook Pro Core i7 2.66Ghz with 8GB Ram and 500GB 7200rpm HD and Hi-Res display.
    When I received it, I updated all Mac OS X software via software update.
    I then created a 70GB Bootcamp partition to install a new full copy of Window 7 Ultimate.
    I started with the 64bit version of Win 7, but as has been noted here there are some issues with the driver packages and even after managing to get the 64bit version of the Bootcamp 3.1 driver package update to install in Windows (having first installed Bootcamp 3.0 drivers), the wireless driver would not install or work, nor would the NVidia driver, so I had a very odd display aspect and low res support. There may well have been other drivers not working either, but these two really stood out.
    Despite the Bootcamp 3.1 driver package apparently being installed (as reported by "About Bootcamp", the 3.1 package was still being offered to me in Apple Software Update. I tried to install again, and again it still showed as being available to install. Obviously some issue's here.
    So I decided to try the Windows 7 32bit edition instead, as I don't necessarily need the 64bit version to run the Windows apps I need.
    I deleted the Bootcamp partition and started again. I ended up in the exact same situation with Windows 7 32bit as I had done with Windows 7 64bit - wireless device without a driver, NVidia drivers not installed. This time I had used the Bootcamp 32bit driver packages.
    In the end I've opted to just install it via VMware as a pure virtual machine. This works fine, but for what I do in Windows, I prefer to have a Bootcamp setup.
    Is there a general issue with the new MacBook Pro's and Windows 7 despite Apple releasing updated driver packages? Do these new driver packages handle the dual GPU setup properly?
    I have read a number of "How to's..." for installing Windows 7 on the a MacBook Pro, but none have been successful for me. Am I wasting my time for now and need to wait for Apple to update Bootcamp for the 2010 MacBook Pro's, or am I just missing something in the way I'm doing this? I can't believe it shouldn't be this hard?

    Running Windows 7 Ultimate x64 on my brand new 15" MBP right now.
    The only problem I'm having is the USB controller issue that is reported in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=2411685&start=30&tstart=0
    I ran the Boot Camp assistant, made the partition, rebooted with my 7 DVD, formatted the partition, performed a clean installation, & then installed the drivers from the OSX DVD when Windows booted the first time.
    Replaced the NVIDIA drivers with the latest Verde release. 258.96notebook_winvista_win7_64bit_internationalwhql.exe
    Everything seems to be running just fine at this point.
    Message was edited by: jdamien75

  • MacBook Pro crashes on Windows 7 Boot

    Hey,
    I just bought a new 2010 13 inch macbook pro, and installed Windows 7 on it. When I boot Windows 7 I can use it for like 20 seconds and then later the mouse cursor gets stuck and nothing works. Both the keyboard and the mouse both dont respond to anything I do.
    Just worth mentioning: I installed all the updates before installing Windows 7 and installed the windows 7 drivers after the installation finished.

    So just to be sure, you have the Apple BootCamp control panel and other devices.
    You checked device manager.
    Might want to run msconig and for me, I disable and uninstall what I don't want running and don't use (Bonjour, MobileMe, etc).
    Your OEM DVD is newer than the Boot Camp 3.1, so if you did install 3.1 I would suspect it is at fault.
    Mouse and keyboard seem to (again) be common complaints. Also graphic drivers.
    Make sure you have room for and using System Restore points and can "roll back" and driver update you made.

  • My MacBook pro freezes during start up after 30 secs. Any ideas?

    My MacBook pro freezes during startup while the logo is still showing and the moving circle stops after about 30 seconds. Any ideas please?

    On my Mac that DSMOS message appears about 20 seconds into the boot process.  Booting finishes about 30 seconds after that.
    Do those letters "v" really appear on the screen?
    Unfortunately, if those are the last messages on the screen, I see nothing there that explains the hang.  The next message I see after the DSMOS message is one about an AirPort daemon, although I'm not sure I understand any connection there might be between that and your hang.
    Since you don't have a system restore disc you won't be able to do the next thing I was going to suggest, which is to run the diagnostics that came with that Mac.  If you have an OS X 10.6 installation disc, you could try reinstalling OS X over the top of what's on it now.  Right after that finishes use Software Update to apply any missing OS X updates, or download and install the "combo" updater for the version of OS X 10.6 that you want.  If that Mac has a software problem doing that might help.

  • MacBook Pro freezes during start up and safe boot

    MacBook Pro freezes during start up and will not start in safe boot in recovery, it goes back to apple screen with spinning gear

    Stinkster,
    does your MacBook Pro have a removable battery? If so, then it originally came with grey installation DVDs. If it doesn’t have a removable battery, look on the bottom of your MacBook Pro for its serial number (it’s etched there in tiny print). If its serial number has eleven characters, write down the last three of them; if it has twelve, write down the last four. Include the three or four characters in your reply; they can determine which model MacBook Pro you have, and the model will determine whether it originally came with grey installation DVDs or not.
    If your MacBook Pro did originally come with grey installation DVDs, then you’re going to need to find them (or buy a replacement pair from Apple or iFixit) to reïnstall Mac OS X on your current hard drive, or to install it on a replacement hard drive.

  • I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..

    Hi LamboMong,
    just try this:
    http://refit.sourceforge.net
    install, reboot twice and choose the Windows-Partition on next startup.
    (The apple-bootloader doesn't display all bootable harddisks.
    With rEFIt you can boot from all partitions/harddisks on your computer.)
    I hope that will solve your problem.
    Daniel Fernau

  • How to access my macbook pro from a windows pc?

    how to access my macbook pro from a windows pc?

    Depending on what you mean by "access" the following may help:
    File sharing: How to connect with File Sharing on your Mac - Apple Support
    One way (and there are others) for remote control and remote access between Mac and Windows: http://www.teamviewer.com/en/index.aspx

  • My macbook pro froze last night and I held the power button down to restart the computer. Now the computer will not even start up. Any ideas what may have happened?

    While searching the internet last night my Macbook pro froze up and would not respond to anything. I restarted the computer and now the computer will not ecen start up. It will go to the gray screen with the apple sign. It is there working for 10 seconds and finally shuts down again. Any ideas how to get the computer to come back to life?

    Go step by step and test.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

  • I am trying to connect my macbook pro to a windows 7 server pc.

    I am trying to connect my macbook pro to a windows 7 server pc. I keep getting a connection failed message  saying "The server is available on your computer. Access the volumes and files locally". Any ideas on how to resolve this? I cannot find the the volumes or know where to look for this volume

    Depends on your model TV.   Read your TV user manual.  The newer models have "how to hookup" instructions for computer & games.
    You can also do a forum search as well as a Google search.

  • Using Migration Assistant to move files from old PC laptop to new MacBook Pro that has Windows 8 installed containing Outlook

    When using Migration Assistant to move files from old PC laptop to new MacBook Pro, that has Windows 8 installed containing Outlook, will emails, contacts and calendar entries be moved to Outlook on the new MacBook or into Mail, Contacts and Calendar?

    I doubt they will. But then I'm not sure as I used a migration program once about 18 years ago and totally FUBARed the system I had at that time and I've never used one again.
    For me the reason to have a new system is to start fresh. Installing only program that I now use and manually copying data over from the older system.
    Not sure your older version of Outlook, and the outlook mail boxes, are compatible with Office/Outlook for Mac 2011.
    A better place to ask this question would be on the MS Office for Mac forums.
    Hope it all works out for you.

  • I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs.  The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

    I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs.  The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.

    The method for setting up file sharing is described here:
    http://homepage.mac.com/rfwilmut/notes/sharing.html

Maybe you are looking for

  • Cf11 installation issue on windows 2003 R2 : installer crashes

    Below are the steps I went through : . download the installer exe (ColdFusion_11_WWEJ_win.exe) : 571 106 928 octets . launch it --> nothing happen (I can see in tasklanager some cpu activity during few seconds then nothing) . then I have tried to ope

  • Looking for some help in creating an ItemFilter for a Targeter

    Looking for some help in creating an ItemFilter for a Targeter Need a examples for creating itemfilter and TargeterFirst

  • Messages are in waiting mode in SMQ2

    Hello All, I have plenty of messages in waiting mode of SMQ2. How do I release these messages from the queues. The queue name starts with ABC* in SMQR and it is Registration mode. Please let me know step by step solution and checklist Thanks Mike

  • Sending an email with attachment!??!

    Hi everybody. I'm currently having this kind of trouble: I dynamically create a PDF file which the user should be able to download. But he should also get the chance of sending it to some place via email. So I have to create, send and attach a file t

  • 10 thousand dissapeared photos... where could they be? Please help.

    After my son was on the computer he informed me that all the photos had dissapeared from i photo. ( he was trying to find a photo). He assures me that he did nothing unusual, but i just cant find them. My friend has recovered some, but she has now go