Macbook Pro gets so slow when using Wi-Fi
Hi Everyone,
I bought a Macbook Pro 15 back in 2010.
4GB Ram, i5 processor
It's been a while that I've detected a big loss in my computer performances.
Going slow, spinning wheels, dock/windows animations not fluid...and sometimes it even freezes.
Sounds keep coming out, if there were some, but the screen is completely dead. I can move the pointer but nothing responds.
Sometimes I even have graphic glitches in some part of the screen (or the whole screen one time) that appear just before it freezes.
I tried everything: Boot in safe mode, Boot with Cmd+Alt+R+P , Utility Disk to check and repair errors, and even the system check booting with the installation disk (sorry don't remember the name of the application but...it said no errors found.)
Recently I was in vacation from the other side of the world, and when trying to use the wifi of the house, after 2-3 minutes of navigating, here comes the spinning wheel and, again, it freezes.
I had to shut down manually by holding the power button, and when restarted, since I've added that wifi to my favourites (before noticing the problem) I couldn't even finish the boot that that it started to freeze again.
After an entire afternoon, trying to get rid of this, I shutted down the wifi router because I was starting to think that the problem was the wifi itself.
It worked!
Without WiFi connection, the computer was working perfect.
I've been 3 weeks without using that WiFi and the computer was like almost new. No freeze, everything worked fine. Great!
Now that I'm back home, using my wifi as usual, I noticed that in fact, what is slowing my computer is wi-fi connecton.
Not sure why I couldn't even use it with that connection, but I'm definitely sure that Wi-Fi has something to do with the slow performance I used to have (and still having) on my computer.
Is there something I could do to repair this?
Or something I should check?
Wi-Fi connection is killing my computer...
Thanks!
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider
Similar Messages
-
Macbook Pro gets Extremely slow when itunes is open
When I launch Itunes my mac gets extremely slow. I mean so slow that right now it is open and i am watching my words catch up to my typing. If I play a song on itunes my processor doesn't go about 40% and it is still extremely slow. I even tried to wirelessly sync my iphone and it still is like this. Any one know why. I have lion with all updates. If I don't launch itunes I'm fine When I launch Itunes It drags like a mother...lol any and all help appreciated TIA!!
How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space. -
MacBook Pro gets very slow when Safari is opened
When I open Safari, my computer gets very slow.
If I quit Safari, everything works fine.
How can I re-install Safari?
Could it be my HD? I have already repaired my HD.
Software: Mac OS X Lion 10.7.5 (11G63)reboot your computer to the recovery partition by restarting and holding the keys:
<COMMAND> + r
Follow the directions here:
http://mac.tutsplus.com/tutorials/os-x/verifying-and-repairing-permissions-in-os -x/
in the section "Working in recovery mode".
After you repair permissions also perform a disk repair then reboot: -
My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
My macbook pro get very hot when i upgrade it to lion osx, what is the solution?.
my macbook pro get very hot when i upgrade it to lion osx,and the fans are running very fast; what is the solution?.
it says user 31%; system 40%; idle 29%; and it's changing rapidly;
is that what you looking for? pls. expalin more and thnx for trying helping . -
My MacBook Pro gets really hot when I open a video file of any kind and the video starts lagging and the image fades away, also with anything that starts the fan. Is extremely hot on the left upper corner. Is there something I can do about it?
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
Hello all,
I am new to posting on this forum but I really hope that someone out there can help me out. I have a 13" MacBook Pro, 2.53 GHz Core 2 Duo, 4GB 1067 MHz DDR3, running OSX 10.6.8. My problem is that when I unplug the laptop form the charger and run it on the battery, the computer becomes unresponsive to any commands at all. It basically really slows down to a crawl. Even when rebooting it will take 5-10 minutes or more to do so. The odd thing is, when it gets plugged back in while any of this is going on, within a minute or two it works perfectly. It has been in a mac authorized repair shop for 7 weeks and has had a new logic board and a new hard drive replaced. The battery was tested and charges fine, holds a charge when unplugged, and the system profile shows the battery at Normal. Recently, many knowledgeable mac enthusiasts gave me tip that might help. Here is what I did: Ran an SMC reboot (no success), rebooted the computer under safe mode then unplugged it to test (no success), and ran a hardware test on the install disk (showed hardware ok)
I am at a loss as to what to do next. It has become impossible to use this laptop for my classes when it is unplugged. I am about ready to just go buy a new one, and call this one a goner.
I am hoping someone reading this can help with any other ideas on its problem. Help? Anyone?
SteveLPBassman,
since the tech in your IT department was able to copy your daughter’s data from her MacBook Pro’s internal disk, I’d suggest completely erasing the internal disk (using Disk Utility in Recovery mode, reformatting it with a “Mac OS Extended (Journaled)” filesystem), reïnstalling its original version of Mac OS X (either Snow Leopard from the grey Mac OS X Install DVD if it originally came with two grey DVDs, or Lion via OS X Internet Recovery if no grey DVDs originally came with it), running Software Update to get it to 10.6.8 or 10.7.5 respectively, reïnstalling Mavericks, running Software Update again to get it up to date, and finally restoring your daughter’s data. -
Why is my Macbook Pro running so slow when returning from sleep mode?
I got my new Macbook this past Christmas so it is about two months old. I have the 13" Macbook with the standard 4GB of RAM (not sure if that matters), but when I got my mac I downloaded a bunch of games and such which may have slowed it down initially, though I have downloaded OnyX and Appzapper to uninstall apps and clean my computer. Also I have deleted EVERYTHING from "Login Items" which I thought might help. Basically whenever I am done using my computer I just shut the screen, I don't shut it down or actually click "Sleep Mode" so I'm not sure if shutting the screen puts it in "Sleep Mode," but whenever I open my computer back up I get that spinning loading icon when I click on anything on my desktop and it usually takes 5-10 minutes of this super slow loading before I can actually use my computer. Not sure what the deal is but it is clearly super annoying and I'm hoping to find out how to get around this. I have six 2GB sticks of RAM that I am hoping to trade for two 4GB sticks of RAM to speed up my computer but I am not sure if that would even fix my problem. This is my first Macbook, besides my mothers Mac desktop that I have been using for years throughout High School, but I am a windows guy. I consider myself pretty good with computers, not an expert but I can fix 95% of the problems I encounter, but this one has been stumping me! Thanks a million in advance!
Hello Linc -
I hope you don't mind but I have a similar issue. Might I be able to enlist your assistance with this issue? I've done as you said, and I have copied the approximate range of messages during my most recent incident. What I'm noticing is that my Mac is staying busy even while asleep. I'm concerned about this behavior, hoping you might be able to help debug the situation and set me on a good path to resolution.
Here's my data (I don't know for certain that I grabbed the proper amount or range of data, but hoping this will help):
6/4/14 10:06:06.287 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
6/4/14 10:06:06.519 PM soagent[231]: [Warning] Services all disappeared, removing all dependent devices
6/4/14 10:06:06.881 PM HyperDock Helper[275]: couldn't get dock children!
6/4/14 10:06:08.414 PM syncdefaultsd[264]: [AOSAccounts] : IAAppProvider::CopyAccountUIDForUser Timed out waiting
6/4/14 10:06:09.178 PM com.apple.internetaccounts[290]: [Warning] Services all disappeared, removing all dependent devices
6/4/14 10:06:12.882 PM HyperDock Helper[275]: couldn't get dock children!
6/4/14 10:06:12.882 PM HyperDock Helper[275]: empty dock rect!
6/4/14 10:06:13.091 PM com.apple.SecurityServer[27]: Session 100014 created
6/4/14 10:06:15.150 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:06:17.089 PM com.apple.NotesMigratorService[318]: Joined Aqua audit session
6/4/14 10:06:24.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=330[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:06:25.057 PM com.apple.SecurityServer[27]: Session 100003 created
6/4/14 10:06:26.712 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x143] flags: 0x8 binding: FileInfoBinding [0x351] - extension: log, UTI: com.apple.log, fileType: ????.
6/4/14 10:06:26.712 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xa03] flags: 0x8 binding: FileInfoBinding [0x903] - extension: log, UTI: com.apple.log, fileType: ???? request size:128 scale: 1
6/4/14 10:06:27.190 PM com.apple.IconServicesAgent[293]: main Failed to composit image for binding VariantBinding [0x24b] flags: 0x8 binding: FileInfoBinding [0x353] - extension: jpg, UTI: public.jpeg, fileType: ????.
6/4/14 10:06:27.191 PM quicklookd[307]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0xc03] flags: 0x8 binding: FileInfoBinding [0xb03] - extension: jpg, UTI: public.jpeg, fileType: ???? request size:128 scale: 1
6/4/14 10:06:27.594 PM HyperDock Helper[275]: dockRunloop exited!
6/4/14 10:06:27.687 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Dropbox" for over 1.00 seconds. Server has re-enabled them.
6/4/14 10:06:28.666 PM AddressBookManager[316]: Validate metadata timed out, cancelling
6/4/14 10:06:30.082 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Dropbox" after 3.40 seconds (server forcibly re-enabled them after 1.00 seconds)
6/4/14 10:06:39.079 PM Dropbox[274]: PyObjCPointer created: at 0xcc3fc88 of type {OpaqueJSContext=}
6/4/14 10:06:47.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 347) - Using /dev/fsevents directly is unsupported. Migrate to FSEventsFramework
6/4/14 10:06:58.966 PM Dropbox[274]: ICARegisterForEventNotification-Has been deprecated since 10.5. Calls to this function in the future may crash this application. Please move to ImageCaptureCore
6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class HTTPHeader is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
6/4/14 10:07:07.421 PM Creative Cloud[252]: objc[252]: Class ProxyManager is implemented in both /Applications/Utilities/Adobe Creative Cloud/utils/AdobePIM.dylib and /Applications/Utilities/Adobe Creative Cloud/AppsPanel/AppsPanelIL.dylib. One of the two will be used. Which one is undefined.
6/4/14 10:07:13.408 PM Creative Cloud[252]: file path : file:///Applications/Utilities/Adobe Creative Cloud/ACC/resource/SelfUpdate/html/selfUpdateScreen.html?locale=en_US
6/4/14 10:07:13.479 PM Creative Cloud[252]: size: 440.000000, 664.000000
6/4/14 10:07:14.280 PM apsd[63]: Failed to send activation record to service com.apple.ManagedClient.enroll
6/4/14 10:07:16.843 PM Adobe CEF Helper[359]: Internals of CFAllocator not known; out-of-memory failures via CFAllocator will not result in termination. http://crbug.com/45650
6/4/14 10:07:26.859 PM Adobe CEF Helper[359]: The function `CGFontSetShouldUseMulticache' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance.
6/4/14 10:07:28.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=364[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:07:29.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=365[ksadmin] final status 0x0, allowing (remove VALID) page
6/4/14 10:07:29.000 PM kernel[0]: nspace-handler-unblock: did not find token 1531
6/4/14 10:07:29.821 PM com.apple.mtmd[37]: handler unblock failed. (status=-1/errno=2/token=1531/fd=4)
6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for part of complex type 'any | number | boolean | date | list | record | text | data' used in suite 'Property List Suite': 'data' is not a valid type name.
6/4/14 10:07:31.773 PM System Events[363]: .sdef warning for type 'text | missing value | any' attribute 'uniqueID' of class 'XML element' in suite 'XML Suite': AppleScript ID references may not work for this property because its type is not NSNumber- or NSString-derived.
6/4/14 10:08:10.728 PM WindowServer[103]: disable_update_timeout: UI updates were forcibly disabled by application "Google Chrome" for over 1.00 seconds. Server has re-enabled them.
6/4/14 10:08:13.572 PM WindowServer[103]: common_reenable_update: UI updates were finally reenabled by application "Google Chrome" after 3.85 seconds (server forcibly re-enabled them after 1.00 seconds)
6/4/14 10:08:24.544 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:08:33.130 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
6/4/14 10:08:33.432 PM VDCAssistant[370]: AVF encoder error: fail to create accelerator instance
6/4/14 10:08:42.340 PM ntpd[131]: ntpd: time set +0.479444 s
6/4/14 10:08:42.372 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:08:42.375 PM com.apple.time[205]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
6/4/14 10:09:04.258 PM mds[38]: (Normal) Volume: volume:0x7fc5fc894000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.is9q0A
6/4/14 10:09:55.988 PM fontd[212]: BUG in libdispatch client: dispatch_mig_server: mach_msg() failed (ipc/send) invalid memory - 0x1000000c
6/4/14 10:10:00.000 PM kernel[0]: process Creative Cloud[252] caught causing excessive wakeups. Observed wakeups rate (per sec): 175; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45095
6/4/14 10:10:00.943 PM ReportCrash[380]: Invoking spindump for pid=252 wakeups_rate=175 duration=258 because of excessive wakeups
6/4/14 10:12:07.846 PM ntpd[131]: FREQ state ignoring +0.080428 s
6/4/14 10:12:45.031 PM mds_stores[89]: (Error) SecureStore: Access token 7 changed uid from -1 to 501
6/4/14 10:13:16.989 PM ntpd[131]: FREQ state ignoring +0.109128 s
6/4/14 10:14:53.101 PM ntpd[131]: FREQ state ignoring +0.148578 s
6/4/14 10:17:30.190 PM ntpd[131]: FREQ state ignoring +0.207557 s
6/4/14 10:20:22.536 PM configd[57]: network changed: v4(en1-:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
6/4/14 10:20:22.541 PM netbiosd[184]: network_reachability_changed : network is not reachable, netbiosd is shutting down
6/4/14 10:20:25.616 PM configd[57]: network changed: v4(en1+:192.168.1.159) v6(en1:2602:306:ce95:48a0:1240:f3ff:fea1:8e1e) DNS! Proxy SMB
6/4/14 10:20:29.454 PM apsd[63]: Unrecognized leaf certificate
6/4/14 10:20:32.011 PM com.apple.launchd.peruser.501[201]: (com.google.Chrome.31536[278]) Job appears to have crashed: Bus error: 10
6/4/14 10:20:34.500 PM ReportCrash[410]: Saved crash report for Google Chrome[278] version 35.0.1916.114 (1916.114) to /Users/colton/Library/Logs/DiagnosticReports/Google Chrome_2014-06-04-222034_Coltons-MacBook-Pro-2.crash -
10.9.4 update- MacBook Pro now too slow to use
I installed the 10.9.4 update on July 17. Early 2011 13" MacBook Pro. It has since become too slow to be functional. 'Spinning wheel' constantly, and delays after keystrokes. I had no problems at all before this update. I have read that repairing disk permissions sometimes helps and have tried that. I sometimes have brief periods of normal performance, then it slows down again.
The problem is not specific to an application. It is slow regardless of what I am doing, even when first staring up and logging in.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My Macbook Pro 2011 runs slower when charger is connected
idk why but my macbook pro runs slower when its charging for example im in windows 7 using bootcamp playing nintendo ds on it it runs perfectly when the charger is not connected but then the emulator starts running slower when i connect the charger and the computer heads up my computer is on a table so i know my computer ventilation is working normally idk why my computer getting so slow and hot when i connect the charger it gets so hot that it turns off by itself well it goes to sleep mode can anyone tell me why is that thanks in advance.
Try resetting the SMC and PRAM:
SMC
http://support.apple.com/kb/ht3964
PRAM
http://support.apple.com/kb/PH14222
For the SMC, use the method "for a battery you should not remove yourself." -
2011 MacBook Pro experiencing Kernel Panics when using iPhone 4 as modem
Recently purchased a custom MacBook Pro 15" with the upgraded 2.3 ghz quad core i7 processor. I immediately installed 8 GB of Ram and a 750GB 7200 speed HD from OWC when the unit arrived. All was well when testing from home, and had zero issues after using the Mac assistant to pull apps and user data from my old MBP, which I then sold on ebay.
Brought my new MBP to work, where I use my iPhone 4 (not jailbroken) to data share, using the personal hotspot. I connect the iPhone 4 to the MBP via USB, to keep the battery on the iPhone 4 charged.
While at work, I almost immediately started getting chain Kernel Panics on the new MBP. After hard powering down and restarting, the Kernel Panics would return at unpredictable intervals, sometimes an hour or more, sometimes within seconds of booting. I immediately suspected the RAM from OWC, as bad ram is the leading cause of Kernel Panics, according to a quick google search. So here is what I did in order, although keep in mind that this took place over a period of weeks, where I would intermittently go days w/out a Kernel Panic, and I was going crazy trying to figure this out.
1. Took apart machine and re-seated OWC Ram-did not fix
2. Attempted to confirm OWC RAM was bad before sending back to OWC, moved to step 3
3. Put Apple Hardware Test DVD in and let it run the extended hardware test in loop mode over a weekend (72 hours), with no report of any hardware failure
4. Some reports on the internet seemed to indicate the Apple Hardware test was not always reliable in discovering bad ram, so I purchased memtest, which I then looped and ran for 12 hours to test ram, with no report of failure.
5. Performed clean install of OS X 10.6 from Apple DVD, to include wiping the drive-Kernel Panics remained.
6. Removed OWC ram and installed Apple original Ram-Kernel Panics remained
7. Realized that at home I was on WiFi, and was not getting Kernel Panics (at least none that I could remember over the course of 2 weeks)
8. Tested w/ iPhone 4 connected via USB as personal Hot Spot, and Kernel Panics occurred regularly.
9. Tested w/ iPhone 4 connected via WiFi as personal Hot Spot, and Kernel Panics have not returned (running 6 hours so far w/out Kernel Panic)
At the beginning I had a Kensington Turbo Mouse connected as well, but over time I unplugged it to remove it from my troubleshooting list. At this point I must conclude that when using the iPhone 4 to data share over USB is the cause of my Kernel Panics.
All of the above was the long winded version of, my iPhone 4 is crashing my Mac. I just wanted interested parties to know what I've done already before suggestions are made.
Has anyone else experienced this issue? Anyone using their iPhone 4 to data share and connecting via USB w/out experiencing Kernel Panics? Anyone have any thoughts/ideas as to why this would occur?
FWIW, I've tried more than one USB cable to connect the iPhone to my MBP, and experienced Kernel Panics w/ both cables. I also fully restored my iPhone 4 when the recent 4.3 iOS update was released, so I don't think it's a software issue w/ the iPhone. I do not have a second iPhone 4 to test with, I also do not have a second Mac to test with.
Thanks up front for your thoughts and/or assistance.
BillHi everyone !
I'm new on this forum (and French btw, so I apologize in advance for any mistake (: )
I've bought the brand new MBP 13' few weeks ago, and I kept having this problem until now, I just installed K64 Enabler, and it seems to work perfectly, so I wanted you all to know it
Thanks for all the help you brought me !
Hope Apple will fix this once for all !
See you ! -
Iphoto running slowly, Macbook Pro also very slow when running multiple apps
Iphoto has become almost impossible to use. I keep seeing the loading rainbow coloured circle every few seconds. Same with preview. Please help!
Problem description:
iPhoto runs very slowly, Macbook has also become slow while running apps simultaneously - loading circle shows up all the time.
EtreCheck version: 2.1.8 (121)
Report generated 29 March 2015 7:37:41 pm IST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 822
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 1:5:22
Disk Information: ℹ️
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (494.72 GB free)
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
[not loaded] com.roxio.TDIXController (1.7) [Click for support]
/System/Library/Extensions
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
Startup Items: ℹ️
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
MobileBrServ: Path: /Library/StartupItems/MobileBrServ
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.hp.help.tocgenerator.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
User Launch Agents: ℹ️
[running] com.hp.printerAgent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
Flux Application (/Applications/Flux.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 55 Check version
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.0 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
VLC Streamer [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
22% WindowServer
14% mds
2% Activity Monitor
2% Dock
2% sysmond
Top Processes by Memory: ℹ️
387 MB firefox
159 MB mds_stores
107 MB Finder
107 MB WindowServer
99 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
28 MB Free RAM
1.60 GB Active RAM
1.58 GB Inactive RAM
1.08 GB Wired RAM
4.89 GB Page-ins
9 MB Page-outs
Diagnostics Information: ℹ️
Mar 29, 2015, 06:30:27 PM Self test - passed
Mar 29, 2015, 04:05:49 PM /Library/Logs/DiagnosticReports/Preview_2015-03-29-160549_[redacted].hang
Mar 28, 2015, 06:31:45 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Adobe Flash Player Install Manager_2015-03-28-183145_[redacted].crash
Mar 27, 2015, 01:31:27 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Mail_2015-03-27-133127_[redact ed].crashWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
MacBook Pro run very slow when open Contacts
My MacBook Pro (earlie 2011) run very slow. When open Contacs show the color ball. I can't see duplicates contacs.
Back up all data.
1. If you use iCloud, uncheck the box marked Contacts in the iCloud preference pane. Press return to confirm, or click Keep on Mac in the dialog that opens.
2. From the list of groups on the left side of the Contacts window, select All On My Mac. If that group doesn't exist or is empty, skip this step. Otherwise, from the menu bar, select
File ▹ Export ▹ Export vCard
Save the exported contacts to the Desktop.
3. Quit Contacts. Triple-click the text on the line below on this page to select it, then copy it to the Clipboard (command-C):
~/Library/Application Support/AddressBook
In the Finder, select
Go ▹ Go to Folder
from the menu bar, paste into the box that opens (command-V), and press return.
A Finder window will open with a folder selected. Move the selected folder to the Desktop, leaving the window open for now.
4. Launch Contacts. Your contacts will be gone. If you took Step 2, then double-click the file you created in that step and confirm that you want to import from it. Your contacts will reappear.
5. Re-enable Contacts in the iCloud preference pane, if you disabled it. Test. If the issue is resolved, delete the AddressBook folder and the vCard file on the Desktop and close the open folder window.
Otherwise, quit Contacts again and put the AddressBook folder back where it was, overwriting the newer one that will have been created in its place. Post your results. -
My MacBook Pro getting so slow and the temperature is really high, Please Help :)
I have problems with my MacBook Pro it warming up to much, the temperature reaching up to 98 degrees, I have to work with a fan for my mac, I searched for information on the subject but concludes as discussed in various subjects is manufacturing problem, well that's the first problem, the second and that worries me, from 1 month ago my Mac started getting so slow I cant work on it, then I format it and install the Lion (before was Snow Leopard that came from the factory when I bought it in April last year) and still with the same problem, looking for solutions I realized that when I work with my mac connected to a power source with the magsafe works perfectly. I perform the hardware test and I get the following error: 4SNS/1/40000001: VPOR-0.592 and can't solve it, I search but no result about this error, also I reset the PRAM and SMC but still the same, my mac just work properly when is plugged to a power source.
Please help!!!!
Thanks in advance
MacBookPro8,1 *Mac OS X 10.7.4 (11E53) (Mac OS X Lion 10.7.4 (11E53)) * Intel Core i7 * 2.7 GHz * 4 GB (1333 MHz DDR3) * ROM MBP81.0047.B27 * SMC Version 1.68f98 * kernel Darwin 11.4.0i hope someone can help you but sounds like this might be a problem for the genius bar.
-
Why my macbook pro getting so hot while using two or more simple application???
Hi all,
for last 4 month i have been used macbook pro. at the begin i didn't face any trouble. recently i found that when i ran two or more application at a time my notebook began start hot. it's very scaring for me. what shall i do now.
one more thing, i need to use virtual machine here. is it create any problem for macbook pro ???Notebook computer are designed to handle higher temps, so it's important to know the actual temps. I use the free utility Temperature Monitor:
http://bresink.com/osx/TemperatureMonitor.html
because it does not invoke DashBoard, where all the widgets running can give a higher than realistic reading.
MBPs have thermal protection; if the temps approach those which could damage the computer, it shuts off. The safety shutdown point is, depending on the MBP variant, close to 100C/212F, a level that feels realy hot to the touch.
Other things to consider:
Make sure that air can get around and under the computer. Setting the computer on your lap or a blanket can block part of the heat dissipation system.
Commercial anti-virus/internet security programs can run up the temps
Third-party backup software can also run up temps. On one of my computers, using Western Digital's backup software jumped the processor temp by over 10 percent.
Shut off DashBoard when not using it with this widget: http://www.apple.com/downloads/dashboard/status/dashquit_berenguierduncan.html
Can you elaborate of what you consider "simple Apps." A web browser is no longer simple if you are visiting sites that have a lot of Flash animation and/or video content. My MBP will jump 15-20F when viewing such sites with any browser.
Maybe you are looking for
-
Hi, I'm not sure if we're posting bugs to the forum but i'll just post it up here anyway.. I'm using HTMLDB 2.1 running on Oracle Express and uploaded a javascript file (into 'static files') so that i could reference it from a page. My page was worki
-
Roundcube on Server 10.8.5 Not Running
Everyone, Up until yesterday the Rounccube install on a 10.8.5 server was running correctly. The computer was restarted and now every time some tries to connect to the web interface the get the: DATABASE ERROR: CONNECTION FAILED! Unable to connect t
-
Hi All, I have sychronised my outlook Calender, through PC Suite, with my phone and all is well except that the phone does not display any events that are tagged as an 'All Day' event in Outlook???? Appointments that have a specific time range are di
-
Hi Just bought my brand new mac had all my files transferred from my old pc and now i try to start and it has a password that i cant get past i have tried my apple password and another the dick smith store had on a piece of paper nothing works and th
-
hi friends, I have two pages in my script...say FIRST, SECOND. In the FIRST page...I have three windows..Header, Main, Footer In the SECOND page I have only the main window. My output is really long that it can easily fit in these two pages. NOw, my