Macbook pro gives 'no airport driver' error after applying latest update

So I applied the latest security update this morning, rebooted and now my macbook refuses to finish booting into gui mode. It says 'no airport driver' and tries to do something 10 times (takes awhile) but then doensn't finish booting and drops me into a console where it says 'compname/I have no name!#' and the whoami command hangs!
Luckily I have boot camp with windows on this mac and I'm posting from the windows side right now. Everything works fine from the windows side (wifi, etc).
So anyone else have this problem? Or have any ideas how to fix it? I'll reboot in a bit and write down the exact error messages hoping it will help.
I really would not like to reinstall mac os if I don't have to, tho this seems to be the only way to fix this.
-KaeruKami
BTW some more info on this machine, its a macbook pro model A1150, 2.0ghz 15" core duo w/ 2gb ram, 120 gb hd, etc.
Thanks in advance

Hi,
I'm seeing similar problems loading the airport driver on my macbook pro though it doesn't stop me from starting up OS X. Originally I only discovered the problem because my machine would intermittently boot up without the airport status icon in the menu bar. Checking the network settings I saw that airport was off and there was no option to turn it on. Digging further I found that there wasn't even an airport card listed in the hardware inventory in the system profiler. Checking out the system.log in the Console app I found the following sequence of errors:
Feb 25 21:45:05 localhost kernel[0]: ath_attach: devid 0x24
Feb 25 21:45:05 localhost kernel[0]: Previous Shutdown Cause: 5
Feb 25 21:45:05 localhost kernel[0]: ar5416GetEeprom: Failed crc in geteeprom
Feb 25 21:45:05 localhost kernel[0]: unable to attach hardware; HAL status 7
Feb 25 21:45:05 localhost kernel[0]: start [/SourceCache/AirPortDriverAtheros5424/AirPortDriverAtheros5424-221.46/m35b/src /driver/AtherosController.cpp:464] loaded unsuccessfully
A few lines later I also see the "No Airport Driver Found" message.
I'm not sure exactly when this problem started happening because I usually just leave my macbook pro connected to my network via an ethernet cable. I don't use the airport often but it's pretty annoying when I need it and I can't get it to start reliably.
-Thayer

Similar Messages

My laptop macbook pro 2010 froze while i was installing its latest update what should i do ?

My laptop macbook pro 2010 froze while i was installing its latest update what should i do ?

Shutdown then restart if possible. If you do restart OK, then try the update again after doing this:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Slow macbook pro since the airport security patch and last OS update about a week ago..

Hi, my Macbook Pro has slowed down to a crawl on the internet since the airport security patch and OS update about 1 week ago. I am using Firefox 3.6.17 and have tried all versions up to date (but 3.6.17 is the best). Same issues with Safari too. I am using an Airport wireless modem also so should not be any issues with compliance. Local programs seem to run OK... but the internet is slow enough to grow a beard... Do they have a patch for this issue. It only started after the updates. Was blazing fast until that.

How large is your hard drive and how much hard drive space do you have left?
Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

JDBC Driver errors after installing Security Update 04-2007

After installing the latest security update for 10.4.9, My JDBC driver is no longer working. I'm running PHP & Mysql as a localhost for dev and I know that both are running but are not speaking to each other. I use SQL4X Manager to manage my DB and that can't access MySql. I have the same set up at work with out the security update installed and everything is working great which let me to believe that the security update muck'd something up. Anyone else have the same problem?

Can't help with the airport problem, since I don't do wireless. As for backing up, these should get you pointed in the right direction:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html
Since you're a newcomer to the Mac, peruse these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac, and
MacTips Learning Centre.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides, and
A guide for switching to a Mac.

Macbook Pro won't boot up immediately after today's update

I installed the update that auto updater was letting me know needed to be installed today.
It was a Safari update and a security update. (I didn't catch the number but it just became available today)
Now after my Mac rebooted itself it goes no further than the grey screen and the spinning grey wheel. I'm pretty good about keeping my Mac updated regularly.
Anyone have any clues as to what's going on here?
Tried restarting a few times, reset the battery and zapped the PRAM, all to no avail. Also ran Techtool on it and it didn't help either...
Of course Applecare is closed...Has anyone else experienced this?
Something very similiar happened (immediately after an update) back in June but that time I was getting the international prohibitory symbol...that time I had to do an archive and install of the system software. I'm thinking I'm heading in the same direction with this one.
From what I've been reading on these message boards it seems like this happens occasionally and I too was experiencing terrible slowdowns a couple of months ago that were fixed by either a software update or the resetting of the computer battery / PRAM etc.
Isn't it a strange coincidence that this is happening again? Could this be indicative of some worse problems with my Mac? Or is it just a faulty install of the update?
Any ideas would be appreciated,Thanks
-schin

Thanks for the info.
Actually, I fixed it by simply restarting in Safe Mode (Holding the Shift key down upon restart)
It actually took about 10 minutes of holding the key down but eventually it did indeed start in safe mode and I logged in. After doing this, I did a shut down and restarted it repaired what ever directory errors it had. It gave a prompt about repairing something (I didn't catch what it said)
and then it's been fine since then.
AppleCare says with every update there is a small percentage of Macs that don't play nice...
so this time I was the unlucky one, but luckily it was a simple fix.
Thanks again for the reply!

Airport slows down after the latest update !

I have a ibook running the latest version of the masOs . After doing a automatic software update ( if I recollect it did a MacOs and Airport update - the computer has slowed down and access the wireless networks with great difficulty ! How do we resolve this problem or go back to the earlier version ?

What kind of difficulty accessing wireless networks?
I've experienced no such problems.
Did you quit all running applications before installing the 10.4.6 update? I always quit all running applications before installing any OS, Software or Security updates.
Before installing a major OS Update such as 10.4.6, I always check my hard drive for any directory problems with Disk First Aid repair via Disk Utility when booted from my Tiger install disc.
As a first step, I suggest Resolving Disk, Permission, and Cache Corruption for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided.
To revert to an earlier 10.4 x version such as 10.4.5 will require re-installing 10.4 via your 10.4 install package (archive & install selecting preserve user and network settings) and then update to the chosen version only.

How do I get Lightroom to read my imaes on import after applying latest update?

PLEASE HELP! Just updated lightroom to 5.7 and did 8.7 CR update. Now after years of using lightroom with same platform, nothing can be read on import. Error message says can ont read files when I import. I can see them until i click import

enebak wrote:
Yes, Im a MAC user. How do I do that? I am so frustrated!
Dunno - it's an operating system thing, and I'm a Windows user

Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive

Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
Tried to reset pram, smc, nvram.
Tried installing new RAM.
Tried installing new hard drive.
You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
Any help appreciated...

It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck.

I've got a MacBook Pro 1TB HD, the drive was damaged (probably dropped) after I formatted the new drive I was able to get the OSi onto the drive and it's now up and running..But prior to removing the old HD I was able to run CloneZilla to map t


    I've got a MacBook Pro 1TB HD, the drive was damaged (probably dropped) after I formatted the new drive I was able to get the OSi onto the drive and it's now up and running..But prior to removing the old HD I was able to run CloneZilla to map the drive. The problem I'm having is getting the files and documents back on the new HD.
   I created a folder on the desk top and moved all the files and docs onto it, ( files / docs was originally burnt on a DVD ). I'm not sure A) how to open the specific files B) which files to extract C) Is it as simple as drag and drop...
   Hope you're able to understand my problem and offer some suggestions, in advance thank you for your time and effort...

Hi, Steve -
Yes, the CD-ROM drive must be jumpered as Master in order for it to be bootable.
Your G4 (PCI) should have two built-in IDE buses - one is usually assigned to the CD-ROM and Zip drives, and the other is used for hard drives. If you have the hard drive connected to the same bus as the one the CD-ROM is on, try switching the hard drive to the other bus.
Set the hard drive's jumpers as Master.
Exception - if the hard drive is a Western Digital, it may have a third position, Single, which must be used when the drive is the only device on the bus.
Note - Cable Select jumper settings will not work on a G4 (PCI).
Edit - -
Startup Manager, which is what booting with Option held down invokes, is not available on a G4 (PCI).
Article #106178 - Startup Manager: How to Select a Startup Volume
Firewire Target Disk Mode is limited on a G4 (PCI) - it can be the Host machine, but not the Target machine.
Article #58583 - Firewire Target Disk Mode
Relatedly, a G4 (PCI) can not boot to firewire drives, although it can use them for storage.
Article #58606 - FireWire Booting

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard. Not bootable via Airport obviously or if Filevault is used.
It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
Most commonly used backup methods

Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?

Any application I install on my MacBook Pro gives the message "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance" What can I do?

Well that's one. Try the Microsoft help forums: http://www.microsoft.com/mac/support It's their application.
Name another.

Help! Macbook Pro stuck with the spinning wheel after Migration Assistant froze.

I have a Macbook Pro and a Mac Mini both running OSX (latest version). I was trying to the do the Migration Assistant and it froze on the Macbook Pro and I can't even shut off my laptop. Any tips would be wonderful!!

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

2008 Macbook pro left click not working properly after upgrading to 10.6.8

I have a 2008 Macbook pro and a few months ago after upgrading to 10.6.8 my left click has been wonky.
Using the trackpad the left click eventually gets "stuck" or stops responding and I have to push it multiple times before it does anything. I have tried plugging in a mouse, but when I do so the mouse also behaves the same way. The only way I seem to be able to get the clicking to work properly is to restart the computer with the mouse attached.
I have seen threads about trackpads being messed up by swollen batteries, but my battery is brand new and looks fine, and the clicking problem extends to an external mouse, so I believe it is something with the preferences.
I tried deleting com.apple.driver.AppleBluetoothMultitouchTrackpad.plist and restarting and the problem seemed to be fixed, but then after about a half hour it returned.
Having to keep a mouse plugged into my macbook is driving me crazy, anyone know a solution?

I started having the same issue after update. I'm on a MacBookpro running 10.7.2
ICalled apple and they did a remove battery reboot, a reload lion and a option/command/R/P reboot on startup and then the computer started working. Two days later problem was back. I then did a reboot and the computer was back to working. Today the computer worked fine tell it went to sleep. I had to do a hard reboot to get the Mac up and running and now no left click. Please help. I can not use the Mac with the trackpad, a mouse, a Bluetooth mouse, or a digital pad. All so signs of left mouse click not working. One other item when you go to pick your user at startup the left mouse click works. Help!

MacBook Pro mid-2012 running very slowly after upgrade to Yosemite

Problem description:
MacBook Pro mid-2012 - installed Yosemite, and the system now crawls. Webpages have very delayed responses, can take 30+ seconds to react to typing or selection. I turned off FileVault, that did not appear to help. Emptied the trash, removed some obsolete fonts. Any help for what else to try would be much appreciated.
EtreCheck version: 2.0.11 (98)
Report generated November 30, 2014 at 4:10:51 PM CST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
DELL 1901FP 1280 x 1024 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 16:36:35
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
disk0s2 (disk0s2) <not mounted> : 749.30 GB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Western Digital My Book 640.14 GB
S.M.A.R.T. Status: Verified
My Book (disk3s1) /Volumes/My Book : 640.13 GB (2.29 GB free)
HP Officejet J6400 series
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Toshiba External USB 3.0 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 2.00 TB (544.67 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[loaded] com.globaldelight.driver.BoomDevice (1.3 - SDK 10.9) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.4.19) Support
[not loaded] com.vmware.kext.vmioplug.10.1.26 (10.1.26) Support
[not loaded] com.vmware.kext.vmnet (0143.58.62) Support
[not loaded] com.vmware.kext.vmx86 (0143.58.62) Support
[not loaded] com.vmware.kext.vsockets (90.4.24) Support
/System/Library/Extensions
[not loaded] com.SiliconImage.driver.Si3132r5 (1.5.16) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) Support
[not loaded] com.devguru.driver.DIFMCDFree (1.1.0) Support
[not loaded] com.devguru.driver.DIFMSerial (1.1.0) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) Support
[not loaded] com.wacom.kext.wacomtablet (6.1.5) Support
[loaded] zoom.us.ZoomAudioDevice (1.1 - SDK 10.8) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Users/[redacted]/Downloads/Transmit.app
[not loaded] com.panic.TransmitDisk.transmitdiskfs (4.0.0 - SDK 10.6) Support
Startup Items: ℹ️
ProTec6: Path: /Library/StartupItems/ProTec6
SATARaid5Daemon: Path: /Library/StartupItems/SATARaid5Daemon
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.wacom.wacomtablet.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.icyblaze.iDocumentHelper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.roamingclient.cell.mac.roamingclient.plist Support
[not loaded] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[invalid?] com.sierrawireless.SWoCTool.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
User Launch Agents: ℹ️
[invalid?] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[invalid?] com.adobe.ARM.[...].plist Support
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
[loaded] com.koingosw.MacCleanse4Helper.Reminder.plist Support
[loaded] com.koingosw.MacCleanse4Helper.TrashWatcher.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
Boom Application (/Applications/Boom.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
VMware Fusion Helper UNKNOWN (missing value)
Reminders Application (/Applications/Reminders.app)
VMware Fusion Start Menu Application (/Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Box Sync Application (/Applications/Box Sync.app)
Dropbox 3 Application (/Applications/Dropbox 3.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 60 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 1.1.0-5 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
WacomSafari: Version: 1.1.0-5 Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
CouponPrinter-FireFox_v2: Version: Version 1.1.7 - SDK 10.5 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
Google Earth Web Plug-in: Version: 7.1 Support
ZoomUsPlugIn: Version: ZoomBundleVersionNumber - SDK 10.9 Support
Safari Extensions: ℹ️
Omnibar
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
NTFS-3G Support
Tuxera NTFS Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local]
Total size: 2.00 TB
Total number of backups: 64
Oldest backup: 2013-11-30 08:18:51 +0000
Last backup: 2014-11-30 05:20:09 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
    66% backupd
    22% mtmfs
     9% Box Sync
     3% WindowServer
     3% iTunes
Top Processes by Memory: ℹ️
735 MB backupd
129 MB Google Chrome
86 MB mds_stores
77 MB iTunes
69 MB firefox
Virtual Memory Information: ℹ️
28 MB Free RAM
1.65 GB Active RAM
1.64 GB Inactive RAM
1.28 GB Wired RAM
22.18 GB Page-ins
204 MB Page-outs

My apologies - this post was duplicated inadvertently. Please use: MacBook Pro mid-2012 running very slowly after upgrade to Yosemite
Thanks!

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

Macbook pro gives 'no airport driver' error after applying latest update

Similar Messages

Maybe you are looking for