Macbook Pro hard drive beeping and won't start up

Hi
Last night my 13" mac book pro started beeping. I turned it off and restarted it, the beeping continued on restart and only showed a blank grey screen.
I took the cover off and realised the beeping is coming from the hard drive. It doesn't seem to be a RAM issue, I reset the PRAM and took out and replaced the RAM and it still continued.
Any idea what it could be?
Thanks

Boot OS X Recovery, or your original System Install DVD if your Mac shipped with one, and run Disk Utility.
Most likely your hard disk drive has failed. It may or may not be repairable enough to recover its data, but it almost certainly needs to be replaced.

Similar Messages

Macbook pro Hard drive replacement issue, won't read new drive.

I have a Macbook pro Core 2 Duo. The 2nd generation Macbook pro. I am trying to install a 640GB Western Digital Scorpio Blue hard drive. I have formatted the new drive to Mac OS Extended (Journaled) with the GUID table though an external USB enclosure. I have installed OSX from the CD's onto this new drive and can boot from it externally. When I install it internally and try to boot I get a gray screen with a stop sign (circle with a line through it). If I boot from the install CD and use disk utility the compter sees the drive as 4.6TB and can't format it.
Why would this drive work in an external enclosure but not internally?
I can boot from the drive so it should be good.
My original HDD works in the computer so the connections should all be good.
I am confused. Any help that can be offered would be appreciated.

Is the 640GB WD approved as an internal drive for your MBP? If it is, then the clean, formatted drive with no OSX should be installed in the MBP. Then start up (holding the "Option" key) from the OSX installation disc and install OSX. After a successful installation, the MBP will restart. Then run Software Update to get the latest version of OSX.

Macbook Pro Hard drive partition and Bootcamp Info.plist

Okays, so i was planning on installing windows through USB bootcamp as my CD is broken. I tried editing the Info.Plist and i managed to stuff it up and lost original now it doesnt work, how do i redownload my original one.
THEN i tried to partition the hard drive with disk utility, i accidentally didnt resize each partition and force quit the app and now my hard drive shows 249.56 GB FULL instead of 129.45 full, what do i do to fix my hard drive. in the "about this mac" it shows half my hard drive used as "Other". Please help
Its a Macbook pro 2010 13inch
running 10.9 Maverick

Hi Michele,
Sounds like a corrupted partition map. Can you run the Bootcamp Setup Assistant again to restore the drive to a single volume? Otherwise, I'd backup the OS X side and then re-partition the drive and start from scratch, then restore your backup so at least you'll be back up and operational on the OS X relatively quickly.

My MacBook Pro hard drive died and under warranty a new one installed (hence lost everything). I have updates outstanding in App Store but can't update due to Apple Id under a foreign name I have tried every possible angle. Stuck!

Hi,
I think I know the answer but just to be sure.
To update outstanding Apps in the App Store do I really need to have the person who purchased or downloaded them to sign in?
How can I remove his Apple ID altogether as this person holds no connection to me at all.
His Apple ID has come with my newly installed hard drive (works carried out under warranty), so I'm
assuming it is 2nd hand.
Any advice would be greatly appreciated.
Meg's

You will need to erase the HDD and start over by reinstalling the OS and setting the Mac up as a new one with your own Apple ID.
Linc gives you a few options how;
https://discussions.apple.com/message/25672158

Macbook Pro retina shut down and won't start

Someone help!
I was using my Macbook Pro Retina that I got in 2012 while I was on a trip in Tokyo, Japan. While uploading pictures from my camera, I left to take a shower and came back to see that my computer was shut off. I thought it went into sleep mode so I kept pressing the keyboard but there was nothing. I did have it plugged into the wall without an adapter. I tried the startup button and nothing. I came back to the States and went to the apple store. They said they don't guaranteed that my data could be recovered. I didn't want to take a chance because I'm too nervous I will lose all my files especially recent ones I haven't backed up yet. They suggested I take it to an authorized apple store to see if they could do a data recovery but before I go, does anyone have any suggestion on what I should do before I spend my money? I don't know if it's because I didn't use an adapter in Japan (100v) but I know it's universal. My iphone was charged every night and had no problem.
Thanks!!

btipparat,
the Apple store which you took your MacBook Pro to isn’t an authorized Apple store? Your MacBook Pro’s AC adapter supports worldwide voltages, 100 V to 240 V, so that isn’t an issue.
If you press the button next to the battery indicator lights, do they light up? Do they do so whether or not the AC charger is connected?

Power button on my macbook pro is pushed in and won't start unless i push it quite hard a number of times. Help?

I don't know how it got that way but i went to turn it on and noticed the button was pushed in and wasn't flat against the surface of the keyboard.

You should take to a Aplle store genius bar they will diagnose for free and give you a quote for repair.

My macbook pro hard drive died. I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook. How can I solve this?

I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks

And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

My very expensive 2010 MacBook Pro hard drive died over a year ago (never bothered to fix it as the dvd drive had also failed so not worth it). Nevertheless, I finally decided to sync my iPhone to the replacement laptop pc and it wiped out all the music

My very expensive 2010 MacBook Pro hard drive died over a year ago. I finally synced my iPhone to the replacement laptop pc and it wiped out all the music on the phone including most of the purchases. Can I get the music back (restore didn't help)?

Okay, I finally got the couple of songs left on the phone to play by uninstalling and reinstalling itunes on the pc and re syncing. The last version I installed (just prior to my original post) failed to start due to some unspecified error?!?. Great!. But I still couldn't sync the itunes purchases from the PC to the iPhone. Then, after about an hour of googling and reading assorted posts mostly about using google to resolve the issue, I finally figured out that I have to actually download ALL the purchased albums from iCloud back onto the iPhone! There are hundreds of them, and some are not even available anymore.
Why do I have to do that when I originally purchased and downloaded all the music to the phone? Why are they all on the PC to begin with and why won't they go to the phone via the USB cable? Why didn't all the music get wiped out on the phone when I synced with the dodgy itunes I had to uninstall. never mind.
I accept that all my original music from cds and shared collections is gone on the failed mbp hard drive, but how come this once okay experience has become a trauma? Hundreds of songs to download all over again, sheesh, this has not exactlybeen a "That Was Easy" experience guys.

I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.

I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.

Did you try an SMC reset too? It's easily done and none of those resets to the best of my knowledge hurt anything. When I was fooling with my system, which at one point was a home made Fusion setup, I needed to reset the SMC sometimes to get the drives recognized. Reading the documentation the sudden motion sensor is drive related but that seems to be about it.
Some more specifics may be needed about the drive itself, the model number of your unit, and the OS version you're running.
At present, the problem seems sort of odd to me. FWIW cable problems can be quite intermittent. I used Scannerz to find some of the problems on my original system that I later converted to a new HD and SSD combo. It can find lots of problems if you learn how to use it right (HD problems, logic board system faults, and cable problems) but you need to get a system at least partially up and running to use it, and it doesn't sound to me like your there right now (in other words, don't go out and buy it because at this point I don't know how it could help you)
Another word of advice would be to not go out and start throwing parts at a problem unless you have a good idea what the source of the problem is. If you have a logic board problem, new drives and new cables won't make it go away, you'll just be wasting your money. Logic board problems, cable problems, and drive problems can all have very similar end user symptoms. The article that I linked above named "Hard Drive Problems" has a section on general symptoms of problems and if you read the article it becomes clear there's a lot of overlap associated with different types of problems.
I assume that your unit isn't under warranty. If, by chance it is I wouldn't even fool with it and I'd take it to Apple and let them deal with the problem. You also might want to check with whatever Apple sources you have available to test your system, like an Apple store, and see how much they'll charge (if anything) to evaluate the system.
I certainly hope this helps.

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao.

TS1338 I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. Wayne

I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3 Wayne

ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
                                          classload.jar-5db452le31.zip
                                          ar3.jar-6ce3b2f-45l483f.zip
                                          classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

2011 Macbook Pro Hard Drive Upgrade?

Hi. I am looking at upgrading my 2011 Macbook Pro hard drive. I want to get a 7200 RPM hard drive. I have been looking on Newegg and doing some research, and from what I can tell, the 2011 Macbook Pro uses a 3.0GB/s interface. If I were to buy a hard drive that has a different interface, like a 6.0GB/s interface, would it be compatible? Does anyone know the sizing for an MBP hard drive?
Also, it doesn't matter who the manufactorer is right?
And finally, does anyone have any recommendations?

But in my Honest opinion I don't think you'll really notice the difference between the 5400 and 7200 rpm unless your rendering large video files or transfering large amounts of data to an external or USB drive. But again you'll be limited on the speed of the external connections that your transferring too... If you really want to notice a difference, get the SSD with a Sata 3 or 6.0GBs connection speed. But the difference between a 5400 and 7200 rpm drive for normal tasks is almost negligable, you probably won't even notice the difference, but if you get the SSD you'll definately notice a difference in boot time, transfer speed, video rendering speed, copying speed of large files, etc...

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

Macbook Pro hard drive beeping and won't start up

Similar Messages

Maybe you are looking for