Macbook Pro Hard drive partition and Bootcamp Info.plist
Okays, so i was planning on installing windows through USB bootcamp as my CD is broken. I tried editing the Info.Plist and i managed to stuff it up and lost original now it doesnt work, how do i redownload my original one.
THEN i tried to partition the hard drive with disk utility, i accidentally didnt resize each partition and force quit the app and now my hard drive shows 249.56 GB FULL instead of 129.45 full, what do i do to fix my hard drive. in the "about this mac" it shows half my hard drive used as "Other". Please help
Its a Macbook pro 2010 13inch
running 10.9 Maverick
Hi Michele,
Sounds like a corrupted partition map. Can you run the Bootcamp Setup Assistant again to restore the drive to a single volume? Otherwise, I'd backup the OS X side and then re-partition the drive and start from scratch, then restore your backup so at least you'll be back up and operational on the OS X relatively quickly.
Similar Messages
-
Upgrading MacBook Pro Hard Drive - cannot get Bootcamp partition to work
Hello,
The other day, I decided to replace my 320 GB hard drive with a 1 TB hard drive/SSD hybrid. I did a little bit of research about cloning the drive before that, and it seemed pretty straight forward to clone the OS X partition, but I wasn't really sure about cloning my Windows partition. Originally, my 320 GB hard drive had 2 partitions: 220 GB for OS X Mavericks, and 100 GB for Windows 8.1.
I bought the new drive with an external enclosure and plugged it in. The first thing I did was open Disk Utility and partitioned the new hard drive (750 GB HFS+, 250 GB NTFS). I figured I would need to partition it first and clone each partition separately. I used Carbon Copy Cloner to clone the OS X partition, and it worked with no problem (I immediately could restart my computer and boot with the partition on the new drive, while it was still plugged in by USB).
Next, I tried using CCC to clone the Windows partition the same way (I realize now that CCC cannot do this). 7 hours later, the cloning was complete, but there was an error that a couple files couldn't be copied. I tried copying them manually but it didn't work. I wasn't sure if the Windows partition would work, so to find out, I switched the hard drives and put the old 320 GB one in the external enclosure. I booted my computer and it booted the new OS X partition with no problem. It also mounted the Windows partition that I cloned with CCC, and I can access all of the files in it. However, when I restarted and held down "option", it would not let me boot the Windows partition.
After some googling, I realized CCC is not able to clone a bootcamp partition and make it bootable, so I opened disk utility and deleted the Windows partition (using the minus button), then recreated it (using the plus button). I downloaded Winclone (paid $30), which supposedly can clone a bootcamp partition. I opened Winclone and it seemed pretty simple: you just choose the source partition on the left, and the target on the right. I plugged in the USB enclosure with my old hard drive, and in the Winclone menu the original Windows partition popped up. I chose that as my source, and chose to copy it to the new NTFS partition on the new drive that I created. I left it on overnight, and when I woke up it said it was completed.
I now had two drives mounted: my NTFS partition that I created, and a new one that said "EFI". I have no idea what EFI is. My NTFS partition looks like it has all of the files from my original Windows partition on it; however, when I restart it does not allow me to boot with it, although I now have the option to boot EFI. When I select EFI, I am given the Windows 8.1 start up screen (with the blue Windows logo), but then an error message pops up saying something like there is an issue and it needs to restart (it restarted before I could read the whole thing).
When I boot in OS X, I only have the NTFS partition (with all my Windows files) mounted, and no EFI. When I restart, I can still boot EFI, but I always get the same message and then it restarts.
Is there any way I can fix my Windows partition so that it works the same way it did on my old drive? What is EFI? Can I delete it? How can I make the NTFS partition, which seems to have all of my files, bootable? I only want 2 partitions: one for OS X, and one for Windows. Also, can I do all of this without having to reinstall either of the operating systems?
ThanksHmm, that's a good question!
I headed over to the twocanoes website (the folks that make Winclone) and their guide mentions something about running Sysprep before you create the Windows image. If you skipped that step, that may be why you're having issues
http://www.twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-wi nclone/
Step 24 in that guide also mentions copying a Boot file - were you able to/did you do that?
You may have better luck over in the Bootcamp forum, which is here.
~Lyssa -
MacBook Pro hard drive partition problems
I installed Windows XP through Boot Camp just fine. Then I installed Ubuntu on the same partition as XP and that was fine as well. When I tried to restore a backup of my Ubuntu file system it went all beserk. The restore process was going fine in Ubuntu until it kept saying that it is out of disk space. It still worked until I rebooted my computer. It wouldn't let me start up Ubuntu or Windows XP, but thankfully OS X was all good. After changing the partitions around in Disk Utility the same error occurred when trying to boot into Ubuntu or Windows XP. It said that one partition was the size of the entire disk, while the other partitions kept their original size. I erased all partitions except for Mac and now what remains is my "Macintosh HD" partition which is 97.71 gb and a "disk0s5" partition that it 120.3 gb. The size of the entire hard drive is 120.3 gb. It wont let me change anything from here or install Windows or anything with the partitions.
Incase it matters the computer is a 17" MacBook Pro 1,2 (2.16ghz, 120gb HDD etc.)Hi Michele,
Sounds like a corrupted partition map. Can you run the Bootcamp Setup Assistant again to restore the drive to a single volume? Otherwise, I'd backup the OS X side and then re-partition the drive and start from scratch, then restore your backup so at least you'll be back up and operational on the OS X relatively quickly. -
Macbook Pro hard drive beeping and won't start up
Hi
Last night my 13" mac book pro started beeping. I turned it off and restarted it, the beeping continued on restart and only showed a blank grey screen.
I took the cover off and realised the beeping is coming from the hard drive. It doesn't seem to be a RAM issue, I reset the PRAM and took out and replaced the RAM and it still continued.
Any idea what it could be?
ThanksBoot OS X Recovery, or your original System Install DVD if your Mac shipped with one, and run Disk Utility.
Most likely your hard disk drive has failed. It may or may not be repairable enough to recover its data, but it almost certainly needs to be replaced. -
Hi,
I think I know the answer but just to be sure.
To update outstanding Apps in the App Store do I really need to have the person who purchased or downloaded them to sign in?
How can I remove his Apple ID altogether as this person holds no connection to me at all.
His Apple ID has come with my newly installed hard drive (works carried out under warranty), so I'm
assuming it is 2nd hand.
Any advice would be greatly appreciated.
Meg'sYou will need to erase the HDD and start over by reinstalling the OS and setting the Mac up as a new one with your own Apple ID.
Linc gives you a few options how;
https://discussions.apple.com/message/25672158 -
I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks
And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all. -
My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!
[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465] -
Is it possible to partition my MacBook pro Hard drive?
I want to partition my MacBook Pro hard drive. is that possible? And if yes, How do i go about it? Thanks
Use the Disk Utility in the /Applications/Utilities/ folder to create a new partition of the desired size. Note that if you use Boot Camp, repartitioning the drive may disable it.
(72049) -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
My very expensive 2010 MacBook Pro hard drive died over a year ago. I finally synced my iPhone to the replacement laptop pc and it wiped out all the music on the phone including most of the purchases. Can I get the music back (restore didn't help)?
Okay, I finally got the couple of songs left on the phone to play by uninstalling and reinstalling itunes on the pc and re syncing. The last version I installed (just prior to my original post) failed to start due to some unspecified error?!?. Great!. But I still couldn't sync the itunes purchases from the PC to the iPhone. Then, after about an hour of googling and reading assorted posts mostly about using google to resolve the issue, I finally figured out that I have to actually download ALL the purchased albums from iCloud back onto the iPhone! There are hundreds of them, and some are not even available anymore.
Why do I have to do that when I originally purchased and downloaded all the music to the phone? Why are they all on the PC to begin with and why won't they go to the phone via the USB cable? Why didn't all the music get wiped out on the phone when I synced with the dodgy itunes I had to uninstall. never mind.
I accept that all my original music from cds and shared collections is gone on the failed mbp hard drive, but how come this once okay experience has become a trauma? Hundreds of songs to download all over again, sheesh, this has not exactlybeen a "That Was Easy" experience guys. -
I have 4 Trojan Horse viruses on my external drive I use for Time Machine. My MacBook Pro hard drive is clean. I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3 Wayne
ksu62 wrote:
The infection names are: classload.jar-719ef6a5.zip
classload.jar-5db452le31.zip
ar3.jar-6ce3b2f-45l483f.zip
classload.jar-lef99412-63bsd3fl.zip
Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now. -
I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.
Did you try an SMC reset too? It's easily done and none of those resets to the best of my knowledge hurt anything. When I was fooling with my system, which at one point was a home made Fusion setup, I needed to reset the SMC sometimes to get the drives recognized. Reading the documentation the sudden motion sensor is drive related but that seems to be about it.
Some more specifics may be needed about the drive itself, the model number of your unit, and the OS version you're running.
At present, the problem seems sort of odd to me. FWIW cable problems can be quite intermittent. I used Scannerz to find some of the problems on my original system that I later converted to a new HD and SSD combo. It can find lots of problems if you learn how to use it right (HD problems, logic board system faults, and cable problems) but you need to get a system at least partially up and running to use it, and it doesn't sound to me like your there right now (in other words, don't go out and buy it because at this point I don't know how it could help you)
Another word of advice would be to not go out and start throwing parts at a problem unless you have a good idea what the source of the problem is. If you have a logic board problem, new drives and new cables won't make it go away, you'll just be wasting your money. Logic board problems, cable problems, and drive problems can all have very similar end user symptoms. The article that I linked above named "Hard Drive Problems" has a section on general symptoms of problems and if you read the article it becomes clear there's a lot of overlap associated with different types of problems.
I assume that your unit isn't under warranty. If, by chance it is I wouldn't even fool with it and I'd take it to Apple and let them deal with the problem. You also might want to check with whatever Apple sources you have available to test your system, like an Apple store, and see how much they'll charge (if anything) to evaluate the system.
I certainly hope this helps. -
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation. -
I erased my 2012 MacBook Pro hard drive, what version OSX do I need to reload ?
I erased my 2012 MacBook Pro hard drive, what version OSX do I need to reload ?
Mac OS X 10.7.5 or newer, or see below. Press the Command and R keys at startup to load the recovery partition, or the Option, Command, and R keys to reinstall the computer's original OS.
(106272)
Maybe you are looking for
-
GR/IR account G/L balance does not match with BSIS table
Hi, I am preparing a report which uses table BSIS.But the total in the table does not match with the GR/IR G/L balance account.When I click on balance item display in FS10N the entries match with that of BSIS but the total is different.Also how to fa
-
Is it possible to put the results from a query in a variable to use in the bean class?
Hello, I'm using JDeveloper 12.1.2.0.0 I would like to keep the result of my queries (the method i created in the AppModule) in a RichTable or other type of variable so i can have the results stored and i don't have to do unnecessary queries after. I
-
ERROR: jbd can only store block numbers in 32 bits.
I am running Oracle VM Server 2.2.1. When trying to format the following partition, an error is raised. [root@vmserver08 ~]# cat /proc/partitions major minor #blocks name 8 0 143247360 sda 8 1 104391 sda1 8 2 10482412 sda2 8 3 2096482 sda3 8 4 1 sda4
-
HT1577 How much space does 26 24 minute tv shows take up
I am downloading my favorite tv series onto my iPod and I would like to know how much space 26 24 minute episodes take up.
-
My Voicemail greeting saves but when people call they get an old greeting from several years ago?
I record a personal voicemail greeting. Play it back and tap SAVE. When people call in they are getting a "ghost voicemail" recorded several years ago. If I go back and hit play it tells me there is NO voice greeting saved. Help!